Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Recover Turret

    Uploaded by

    Michael Naím Dévora Quintanar
    This document provides instructions for adjusting the reference position of a turret indexing system on a QTU-250M/350M machine unit. The steps include: (1) accessing the machine maintenance menu, (2) selecting options to orient and unclamp the turret, (3) pressing keys to highlight and set the initial reference position while rotating the turret, (4) mounting a tool and tester to measure movement and adjust the position, and (5) fixing the zero point and clearing highlights to complete reference position adjustment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Recover Turret

    Uploaded by

    Michael Naím Dévora Quintanar
    2K views2 pages
    This document provides instructions for adjusting the reference position of a turret indexing system on a QTU-250M/350M machine unit. The steps include: (1) accessing the machine maintenance menu, (2) selecting options to orient and unclamp the turret, (3) pressing keys to highlight and set the initial reference position while rotating the turret, (4) mounting a tool and tester to measure movement and adjust the position, and (5) fixing the zero point and clearing highlights to complete reference position adjustment.

    Original Description:

    Procedimiento para recobrar torreta Mazak QTU 350 M

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for adjusting the reference position of a turret indexing system on a QTU-250M/350M machine unit. The steps include: (1) accessing the machine maintenance menu, (2) selecting options to orient and unclamp the turret, (3) pressing keys to highlight and set the initial reference position while rotating the turret, (4) mounting a tool and tester to measure movement and adjust the position, and (5) fixing the zero point and clearing highlights to complete reference position adjustment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views2 pages

    Recover Turret

    Uploaded by

    Michael Naím Dévora Quintanar
    This document provides instructions for adjusting the reference position of a turret indexing system on a QTU-250M/350M machine unit. The steps include: (1) accessing the machine maintenance menu, (2) selecting options to orient and unclamp the turret, (3) pressing keys to highlight and set the initial reference position while rotating the turret, (4) mounting a tool and tester to measure movement and adjust the position, and (5) fixing the zero point and clearing highlights to complete reference position adjustment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MAINTENANCE OF MAJOR MACHINE UNITS 5

    5-2-3 Adjustment (QTU-250M/350M)

    1. Reference position of turret indexing


    The turret head is driven and indexed by a servomotor on the basis of an absolute positioning
    system. The controller has the factory-set reference position stored in its memory to perform
    absolute positioning. If the stored data should be lost due to a drop of the battery voltage or if the
    controller itself has been replaced, set and store the reference position anew by the following
    procedure:

    (1) Press the machine menu key to call up the machine menu.
    (2) Select [MAINTENANCE1] from the machine menu.
    (3) For the milling specifications, select the [TURRET MILL ORT] menu item in manual
    operation mode while pressing the MF1 key and MF2 key to orient the milling spindle.
    (4) Select the [TURRET UNCLAMP] menu item in manual operation mode to unclamp the
    turret.
    Highlight the menu item.

    OPTION SPINDLE CHUCK TAIL MAINTE- MAINTE- LOW


    THRUST NANCE1 NANCE2 THRUST
    MODE

    TURRET TURRET TURRET TURRET TAIL TAIL


    MILL ORT UNCLAMP INI.SET HOME SET INI.SET HOME SET

    Fig. 5-18 Setting the reference position for turret indexing (1/3)

    (5) Press the [TURRET INI.SET] menu key together with the MF1 and MF2 keys to highlight
    the menu item.
    Pressing the manual pulse feed key can operate the turret. Unlike the regular rotation
    movement, pressing the manual pulse feed key operates the turret regardless of the
    selection of the axis selection switch when the [TURRET INI.SET] menu is highlighted.

    TNo.1

    Fig. 5-19 Setting the reference position for turret indexing (2/3)

    5-23
    5 MAINTENANCE OF MAJOR MACHINE UNITS

    (6) Mount a boring bar holder on the position of tool number 1.


    Next, mount a pick tester mounting jig on the chuck. Match the pick tester with the inner
    diameter of the hole of the boring bar holder, rotate the chuck and measure the movement
    of the pick tester. Adjust the position such that the movement is 0.02 mm (0.0008 in) or
    shorter.

    Chuck

    Turret

    Boring bar holder

    Spindle center

    Fig. 5-20 Setting the reference position for turret indexing (3/3)

    (7) Select the [TURRET UNCLAMP] menu item again to clamp the turret.
    The highlight display of the menu is cleared.
    Determine the position of tool number 1 in this state.
    (8) Confirm that the [TURRET INI.SET] menu is highlighted.
    When it is not highlighted, press the [TURRET INI.SET] menu key together with the MF1
    and MF2 keys to highlight the menu item.
    (9) Press the [TURRET HOME SET] menu key together with the MF1 and MF2 keys to fix the
    zero-point after the menu is highlighted.
    (10) Press the [TURRET INI.SET] menu key to clear the highlight display.

    5-24

    You might also like