Scribd Logo
Upload

Welcome to Scribd!

  • 214 views

    ECM Power Source Circuit

    Uploaded by

    Erln Lima
    This document summarizes the ECM power source circuit diagnostic procedure for the 2RZ-FE and 3RZ-FE engines. It describes the circuit, provides a wiring diagram, and lists the following inspection steps: 1) measure voltage between ECM terminals, 2) check for open in harness/connector to ECM, 3) check EFI main relay, 4) check EFI fuse, 5) check harness/connectors to relay and ECM, 6) check IGN fuse, and 7) check ignition switch and harness/connectors. The goal is to diagnose issues with the power supply to the engine control module.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    ECM Power Source Circuit

    Uploaded by

    Erln Lima
    214 views4 pages
    This document summarizes the ECM power source circuit diagnostic procedure for the 2RZ-FE and 3RZ-FE engines. It describes the circuit, provides a wiring diagram, and lists the following inspection steps: 1) measure voltage between ECM terminals, 2) check for open in harness/connector to ECM, 3) check EFI main relay, 4) check EFI fuse, 5) check harness/connectors to relay and ECM, 6) check IGN fuse, and 7) check ignition switch and harness/connectors. The goal is to diagnose issues with the power supply to the engine control module.

    Original Title

    DI101

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the ECM power source circuit diagnostic procedure for the 2RZ-FE and 3RZ-FE engines. It describes the circuit, provides a wiring diagram, and lists the following inspection steps: 1) measure voltage between ECM terminals, 2) check for open in harness/connector to ECM, 3) check EFI main relay, 4) check EFI fuse, 5) check harness/connectors to relay and ECM, 6) check IGN fuse, and 7) check ignition switch and harness/connectors. The goal is to diagnose issues with the power supply to the engine control module.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    214 views4 pages

    ECM Power Source Circuit

    Uploaded by

    Erln Lima
    This document summarizes the ECM power source circuit diagnostic procedure for the 2RZ-FE and 3RZ-FE engines. It describes the circuit, provides a wiring diagram, and lists the following inspection steps: 1) measure voltage between ECM terminals, 2) check for open in harness/connector to ECM, 3) check EFI main relay, 4) check EFI fuse, 5) check harness/connectors to relay and ECM, 6) check IGN fuse, and 7) check ignition switch and harness/connectors. The goal is to diagnose issues with the power supply to the engine control module.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    DI–206

    DIAGNOSTICS – ENGINE (2RZ–FE, 3RZ–FE)


    DIB2L–01

    ECM Power Source Circuit

    CIRCUIT DESCRIPTION
    When the ignition switch is turned ON, battery positive voltage is applied to the coil, closing the contacts of
    the EFI main relay (Marking: EFI) and supplying power to terminal +B of the ECM.

    WIRING DIAGRAM
    From
    J/B No. 1 EFI Fuse ECM
    (See page DI–173)
    4 11 16
    B–R IGN B–O W–R +B
    1I 1F E5

    6 B–Y
    I14 23 IF1
    Ignition
    B–O
    Switch 2 3E
    7 2 2
    W–R
    J/B No. 3
    2 1 5
    R/B No. 2 1 3E
    EFI Main-
    2 Relay
    AM2 R/B No. 2 W–R
    1 2 3

    2 2 7 IF1
    2
    E D 17
    W W–B W–B W–R BR
    J9 J10 E7 E1
    J/C
    Battery
    EA EF

    A18639

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 468


    DI–207
    DIAGNOSTICS – ENGINE (2RZ–FE, 3RZ–FE)

    INSPECTION PROCEDURE

    1 Check voltage between terminals +B and E1 of ECM connectors.

    PREPARATION:
    +B (+) (a) Remove the glove compartment (See page SF–55).
    (b) Turn the ignition switch ON.
    CHECK:
    Measure the voltage between terminals +B and E1 of the ECM
    connectors.
    OK:
    E1 (–) Voltage: 9 – 14 V
    A18845

    OK Proceed to next circuit inspection shown on


    Problem symptoms table (See page DI–24).

    NG

    2 Check for open in harness and connector between terminal E1 of ECM and body
    ground (See page IN–28).

    NG Repair or replace harness or connector.

    OK

    3 Check EFI main relay (Marking: EFI).

    PREPARATION:
    Remove the EFI main relay from RB No. 2.
    2 5 3 CHECK:
    3 5 Inspect the EFI main relay.
    OK:
    1 2
    Condition Tester connection Specified condition
    1–2 Continuity
    C
    Constant
    t t
    1 3–5 No continuity
    I05027
    Apply B+ between
    3–5 Continuity
    terminals 1 and 2.

    NG Replace EFI main relay.

    OK

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 469


    DI–208
    DIAGNOSTICS – ENGINE (2RZ–FE, 3RZ–FE)

    4 Check EFI fuse (See page DI–173, step 2).

    NG Check for short in all harness and components


    connected to EFI fuse.

    OK

    5 Check for open in harness and connector between EFI main relay (Marking: EFI)
    and battery, and EFI main relay and ECM (See page IN–28).

    NG Repair or replace harness or connector.

    OK

    6 Check IGN fuse.

    J/B No. 1 PREPARATION:


    IGN Fuse Remove the IGN fuse from the J/B No. 1.
    CHECK:
    Check the continuity of the IGN fuse.
    OK:
    Continuity

    NG Check for short in all harness and components


    A18405
    connected to IGN fuse.

    OK

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 470


    DI–209
    DIAGNOSTICS – ENGINE (2RZ–FE, 3RZ–FE)

    7 Check ignition switch (See page BE–14).

    NG Replace ignition switch.

    OK

    Check for open in harness and connector between ignition switch and EFI main relay (Marking:
    EFI), and EFI main relay and body ground (See page IN–28).

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 471

    You might also like