Video Recorder t189

Operation Instruction
Cover
I. Product parameters
1. Video or voice recording while charging
2. Night vision function.
3. Video format: 1280×720P and 1920×1080P
4. Motion detection (setting)
5. One key separately recording
6. Support high-capacity TF card of 8--128G
7.Network camera function
8. The camera can rotate 180 degrees

9. Support loop recording
Page 1
Description of structure
Camera
Infrared lamp Power/

recording
Sound
button recording/infrared lamp
switch
Reset hole
Memory card
slot
Indicating light Micro USB interface
Page 2
III. Operation Guide 1
Charging:
This machine has a built-in rechargeable lithium battery, which shall be charged in
first use as below:
1. Use the USB to connect to the computer for charging.
2. Use a battery charger of 500MAH for charging; connecting to a charge pal or

battery charger for charging during camera shooting or recording can realize
recording while charging;
3. The lamp is still on during charging, and it will be fully charged in about 3-4h.
4. If video recording cannot be carried out with the card inserted, connect this
machine to the computer for formatting of the memory card: fat32 select 32k, exfat
select 128k
Note:
1. It will stop video recording and sounding recording in low battery, and
automatically save and shut down.
2. The blue lamp will flicker quickly without a card during start-up.
3. The blue and red lamp will flicker quickly at the same time when the memory card
is full.
4. The machine will automatically shut down when it is idling for 3min (non video
recording and recording state).
5. Note: Don’t use a high-power battery charger for charging in order to avoid shorten
the service life of the battery.
6. Please charge the product in time after use to avoid it in low battery for a long time.
Page 3
Operation Guide 2
Starting up:
Long press the power button for 3 seconds, the lamp is on and it will power on.
Video recording:
Short press the “power/video recording button” in stand-by state, the blue lamp will
slowly flash for a few times then go out and start video recording. Then short press
“power/video recording button” to stop video recording and save, and the blue lamp is
on.
The video recording will be save automatically in sections, 5min a section in

circulation mode, 8min a section in non-circulation mode.
Sound recording:
Short press “recording key”, the red light slowly flashes for a few times and goes out;
then short press “recording key” to stop recording and save, and the blue lamp is on.
The recording will be saved automatically in sections, 60min per section.
Open/close the infrared lamp;
Long press “recording key” for 2 seconds under standby and recording mode to
open/close the infrared lamp, the red lamp is on/off.
Reset:
Use a toothpick to stab the reset hole for normal working when the product has no
respond.
PC camera:
Connect to the computer without a memory card, and it can serve as a PC camera.
Page 4
Operation Guide 3
Setup:
The product support switchover between 720P and 1080P (default) recording,
circulation recording (closed in default), movable detection (closed in default) and
time watermark (opened in default).
The switch is user-defined. Users only need to insert the card to USB port of the
computer, open the txt document named as SETTINGS in root directory of the TF
card, in which there are the contents of “1, 0, 0, 1” in default. 4 figures can choose 0
or 1 (the first figure: 0 is 720P, 1 is 1080p; the latter 3 figures correspond to
circulation recording, movable detection and time watermark respectively: 0 is
closing, 1 is opening). Modify the saved document, which will be effective after
restarting. Deletion of this document will restore default settings.
Connection to computer
Use the USB data cable to connect to the computer, then it can read the memory
card. A removable disk appears in my computer, click it, save contents of the video
recording document as *:\VIDEO, and that of the recording documents as
*:\RECORD.
Time for modification
Connect to the computer after inserting the memory card into the product and
turning on the product, the memory card will produce a time text "settime.txt", open it
and modify the time value then save it, for example: 2017-03-28, 23: 59: 59,
respectively refer to 23:59:59, March 28, 2017. After succeeding, the time in the txt
will restore to the initial time.
Page 5
Items Relevant parameters
Video format AVI
Video coding M-JPEG
Video resolution 1920 × 1080P FHD / 720P 30 frames (optional)
Image ratio 16:9
Video frame rate 30 fps
Play software Operating system-provided or mainstream audio and

video play software
Support system Windows me/2000/xp/2003/vista; Mac os; Linux; Win7
Battery capacity 680mAh
Video working time 4 hours or so
Recording working time 8 hours or so
Charging voltage DC-5V 500mAh

Interface type Micro 5 Pin USB
Storage support Support TF card -8-128G (high-speed card is

recommended)
Type of battery High capacity polymer lithium
Page 6
Important note:
Please read this manual carefully before using the product and save it for future use.
1. The product does not provide internal storage, please insert the TF card before use
and turn off the product before pull out the TF card.
2. In order to avoid the risk of data loss caused by misuse or malfunction of this
product, please always carry out data backup on the computer.
3. The dispute arising from the camera shooting or recording without the permission
of any other person shall be unrelated to the product and our company shall bear no
responsibility.
4. Our company endeavors to ensure that the contents of the instructions are complete.
Due to different technology and production batches, if there are contents inconsistent
with the recording pen, the recording pen shall prevail.
5. From the date of sale (according to the date of purchase), one year of free warranty
is provided for this product.
6. For self-disassembly, man-made damage to the product or exceeding the warranty

period, corresponding costs of spare parts and other parts shall be charged during
maintenance.
Special Note: for the repair of the product, just return the single machine; for memory
card loss or loss of information during repair with card, our company shall bear no
responsibility hereof.
Page 7
Warning:
In order to maintain product performance, do not store or use the product in a hot,
cold, dusty or high humidity environment. For example, the bathroom, or directly
exposed to direct sunlight or similar high temperature environment (such as internal
of the car directly exposed to direct sunlight).
Do not get close to strong magnetic fields, such as televisions, sound equipment,
induction cookers, microwave ovens.
Do not place the product in a place with intense vibration or instability, such as a car
dashboard or an unfixed shelf.
Safety:
Do not attempt to disassemble or refit this product.
Do not place foreign matter in this product.
Prevent the product from dropping or falling into the water or in the fire.
If you do not use it for a long time, please charge / discharge the product once every
other month.
Page 8

Video Recorder t189

Uploaded by

Copyright:

Available Formats

Video Recorder t189

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Video Recorder t189

Uploaded by

Copyright:

Available Formats

What are the video and audio recording functions of the device?

What are the video and audio recording functions of the device?

How do you charge the device?

How do you charge the device?

Operation Instruction

1. Video or voice recording while charging

2. Night vision function.

3. Video format: 1280×720P and 1920×1080P

4. Motion detection (setting)

5. One key separately recording

6. Support high-capacity TF card of 8--128G

7.Network camera function

8. The camera can rotate 180 degrees

Infrared lamp Power/

Indicating light Micro USB interface

III. Operation Guide 1

1. Use the USB to connect to the computer for charging.

2. Use a battery charger of 500MAH for charging; connecting to a charge pal or

The video recording will be save automatically in sections, 5min a section in

The recording will be saved automatically in sections, 60min per section.

Open/close the infrared lamp;

Time for modification

Items Relevant parameters

Video format AVI

Video coding M-JPEG

Video resolution 1920 × 1080P FHD / 720P 30 frames (optional)

Image ratio 16:9

Video frame rate 30 fps

Play software Operating system-provided or mainstream audio and

Support system Windows me/2000/xp/2003/vista; Mac os; Linux; Win7

Battery capacity 680mAh

Video working time 4 hours or so

Recording working time 8 hours or so

Charging voltage DC-5V 500mAh

Storage support Support TF card -8-128G (high-speed card is

Type of battery High capacity polymer lithium

6. For self-disassembly, man-made damage to the product or exceeding the warranty

Do not attempt to disassemble or refit this product.

Do not place foreign matter in this product.

You might also like