Material Safety Data Sheet

LongTong

Issue date: 10/09/2009

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: Visbella @ Epoxy Part A

DIVISION.: Industrial Adhesives
Product Use: Part A of 2 part adhesive
Company name: Huzhou Longtong Chemical Co.,Ltd
Company address: 1-3# No.969 Qingfang Road, Huzhou Zhejiang China.
Internet: www.chemtg.com
This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for each
of these components is included. Please do not separate the component MSDSs from this cover page.

SECTION 2. INGREDIENTS
Ingredient C.A.S. No. % by Wt
EPOXY RESIN 25068-38-6 70 - 80
KAOLIN 1332-58-7 20 - 30

SECTION 3. EMERGENCY OVERVIEW

Odor, Color, Grade: off-white, very slight epoxy odor.

General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction.
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Vapors from heated material may cause eye irritation.Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
Dust created by cutting, grinding, sanding, or machining may cause eye
irritation.Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy
vision.
Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Prolonged or repeated exposure may cause: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include
redness, swelling, blistering, and itching.
Inhalation: Upper Respiratory Tract
Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and
nose and throat pain.
Vapors from heated material may cause irritation of the respiratory system. Signs/symptoms
may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat
 pain. Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory
system. Signs/symptoms may include cough, sneezing, nasal discharge, headache,
hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.

SECTION 4. FIRST AID MEASURES

The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene
practices are followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water.
Get medical attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an
unconscious person. Get immediate medical attention

SECTION 5. FIRE FIGHTING MEASURES

FLAMMABLE PROPERTIES
Autoignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
EXTINGUISHING MEDIA
Material will not burn
PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Water may be used to blanket the fire. Wear full protective clothing, including helmet,
self-contained, positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and protective covering for
exposed areas of the head.
Unusual Fire and Explosion Hazards:Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Accidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or
spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors,
in accordance with good industrial hygiene practice. Warning! A motor could be an
ignition source and could cause flammable gases or vapors in the spill area to burn or
explode. Place in a closed container approved for transportation by appropriate
authorities.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to local,
state, and federal regulations.
 SECTION 7. HANDLING AND STORAGE
HANDLING
HANDLING:
Avoid eye contact with vapors, mists, or spray.Avoid breathing of dust created by cutting, sanding, grinding or
machining. Avoid breathing of vapors, mists or spray. Avoid skin contact with hot material. Do not eat, drink
or smoke when using this product. Wash exposed areas thoroughly with soap and water. Contents may be
under pressure, open carefully. Avoid contact

TORAGE
TORAGE:
Store away from acids.
Store away from oxidizing agents.
Keep container in well-ventilated area

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS
CONTROLS:
Use with appropriate local exhaust ventilation. Provide appropriate local exhaust when product is heated. Provide
appropriate local exhaust ventilation on open containers. Provide appropriate local exhaust for cutting, grinding, sanding
or machin
(PPE)..
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Eye/Face Protection: Avoid eye contact with vapors, mists, or spray. Avoid eye contact. The following eye
protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
Skin Protection: Avoid skin contact with hot material. Wear appropriate gloves, such as Nomex, when handling
this material to prevent thermal burns. Avoid skin contact.Select and use gloves and/or
protective clothing to prevent skin contact based on the results of an exposure assessment.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate
compatible materials.
Gloves made from the following material(s) are recommended:polyethylene/Ethylene Vinyl
Alcohol.
Respiratory Protection: Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid breathing of
vapors, mists or spray. Select one of the following NIOSH approved respirators based on
airborne concentration of contaminants and in accordance with.
Prevention of Swallowing: Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with
soap and water.
EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
KAOLIN ACGIH TWA - respirable 2mg/m3 Table A4
KAOLIN OSHA TWA - respirable 5mg/m3 Table Z-1
KAOLIN OSHA TWA, Vacated - as dust 10mg/m3
KAOLIN OSHA TWA - as total dust 15mg/m3 Table Z-1
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check
with your local regulatory agency.

SOURCE OF EXPOSURE LIMIT DATA:

ACGIH: American Conference of Governmental Industrial Hygienists
 CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Odor, Color, Grade: off-white, very slight epoxy odor.
General Physical Form: Liquid
Autoignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
Boiling point >=95 ºF [Details: MITS data]
Vapor Density Not Applicable
Vapor Pressure <=27 psia [@ 131.0000000000 ºF] [Details: MITS data]
Specific Gravity 1.330 [Ref Std: WATER=1]
pH Not Applicable
Melting point No Data Available
Solubility in Water Nil
Evaporation rate Not Applicable
Volatile Organic Compounds 0.8 g/l [Test Method: tested per EPA method 24A]
Percent volatile 0.06 % weight [Test Method: ASTM METHOD]
VOC Less H2O & Exempt Solvents 0.8 g/l [Test Method: tested per EPA method 24A]
Viscosity 75000 - 150000 centipoise

SECTION 10. STABILITY AND REACTIVITY

Stability: Stable.
Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents; Heat is generated during
cure. Do not cure a mass larger than 50 grams in a confined space
to prevent a premature reaction (exothem) with production of
intense heat and smoke.
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Aldehydes During Combustion
Hydrocarbons During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Ketones During Combustion
Toxic Vapor, Gas, Particulate During Combustion

SECTION 11. TOXICOLOGICAL INFORMATION

Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
 SECTION 12. ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION: Not determined.

CHEMICAL FATE INFORMATION: Not determined

SECTION 13. DISPOSAL CONSIDERATIONS

Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill. As a disposal
alternative, dispose of waste product in a facility permitted to accept chemical waste.
Since regulations vary, consult applicable regulations or authorities before disposal.

SECTION 14. TRANSPORT INFORMATION

Not regulated per U.S. DOT, IATA or IMO.

SECTION 15. REGULATORY INFORMATION

US FEDERAL REGULATIONS
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No
Immediate Hazard - Yes Delayed Hazard - No

SECTION 16. OTHER INFORMATION

NFPA Hazard Classification

Health: 2 Flammability: 0 Reactivity: 1 Special Hazards: None
DISCLAIMER
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However,
Longtong Chemical does not assume responsibility for any results obtained by persons over whose methods Longtong
Chemical has no control. It is the user's responsibility to determine the suitability of Longtong Chemical'
Chemical's products or any
production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the
protection of property and persons against any hazards that may be involved in the handling and use of any of Longtong
Chemical
Chemical's products. In light of the foregoing, Longtong Chemical specifically disclaims all warranties, express or implied,
including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Longtong Chemical 's
products. Longtong Chemical further disclaims any liability for consequential or incidental damages of any kind, including lost
profits.
 Material Safety Data Sheet

LongTong

Issue date: 10/09/2009

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: Visbella @ Epoxy Part B

DIVISION.: Industrial Adhesives
Product Use: Part B of 2 part adhesive
Company name: Huzhou Longtong Chemical Co.,Ltd
Company address: 1-3# No.969 Qingfang Road, Huzhou Zhejiang China.
Internet: www.chemtg.com
This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for each
of these components is included. Please do not separate the component MSDSs from this cover page.

SECTION 2. INGREDIENTS
Ingredient C.A.S. No. % by Wt
ALIPHATIC POLYMER DIAMINE 68911-25-1 40 - 70
KAOLIN 1332-58-7 30 - 60

SECTION 3. EMERGENCY OVERVIEW

Odor, Color, Grade: Black, pungent odor.

General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
May cause chemical eye burns.
May cause severe skin irritation.
May cause allergic skin reaction
POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Vapors from heated material may cause eye irritation.Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
Dust created by cutting, grinding, sanding, or machining may cause eye
irritation.Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy
vision.
Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Prolonged or repeated exposure may cause: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include
 redness, swelling, blistering, and itching.
Inhalation: Upper Respiratory Tract
Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and
nose and throat pain.
Vapors from heated material may cause irritation of the respiratory system. Signs/symptoms
may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat
pain. Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory
system. Signs/symptoms may include cough, sneezing, nasal discharge, headache,
hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.

SECTION 4. FIRST AID MEASURES

The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene
practices are followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water.
Get medical attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an
unconscious person. Get immediate medical attention

SECTION 5. FIRE FIGHTING MEASURES

FLAMMABLE PROPERTIES
Autoignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
EXTINGUISHING MEDIA
Material will not burn
PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Water may be used to blanket the fire. Wear full protective clothing, including helmet,
self-contained, positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and protective covering for
exposed areas of the head.
Unusual Fire and Explosion Hazards:Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Accidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should
be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or
spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors,
in accordance with good industrial hygiene practice. Warning! A motor could be an
 ignition source and could cause flammable gases or vapors in the spill area to burn or
explode. Place in a closed container approved for transportation by appropriate
authorities.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to local,
state, and federal regulations.

SECTION 7. HANDLING AND STORAGE

HANDLING
HANDLING:
Avoid eye contact with vapors, mists, or spray.Avoid breathing of dust created by cutting, sanding, grinding or
machining. Avoid breathing of vapors, mists or spray. Avoid skin contact with hot material. Do not eat, drink
or smoke when using this product. Wash exposed areas thoroughly with soap and water. Contents may be
under pressure, open carefully. Avoid contact

STORAGE
TORAGE:
Keep container in well-ventilated area

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS
CONTROLS:
Use with appropriate local exhaust ventilation. Provide appropriate local exhaust when product is heated. Provide
appropriate local exhaust ventilation on open containers. Provide appropriate local exhaust for cutting, grinding, sanding
or machin
(PPE)..
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Eye/Face Protection: Avoid eye contact with vapors, mists, or spray. Avoid eye contact. The following eye
protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
Skin Protection: Avoid skin contact with hot material. Wear appropriate gloves, such as Nomex, when handling
this material to prevent thermal burns. Avoid skin contact.Select and use gloves and/or
protective clothing to prevent skin contact based on the results of an exposure assessment.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate
compatible materials.
Gloves made from the following material(s) are recommended:polyethylene/Ethylene Vinyl
Alcohol.
Respiratory Protection: Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid breathing of
vapors, mists or spray. Select one of the following NIOSH approved respirators based on
airborne concentration of contaminants and in accordance with.
Prevention of Swallowing: Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with
soap and water.
EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
KAOLIN ACGIH TWA - respirable 2mg/m3 Table A4
KAOLIN OSHA TWA - respirable 5mg/m3 Table Z-1
KAOLIN OSHA TWA, Vacated - as dust 10mg/m3
KAOLIN OSHA TWA - as total dust 15mg/m3 Table Z-1
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check
 with your local regulatory agency.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Odor, Color, Grade: Black, pungent odor.
General Physical Form: Liquid
Autoignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
Boiling point >=95 ºF [Details: MITS data]
Vapor Density Not Applicable
Vapor Pressure <=27 psia [@ 131.0000000000 ºF] [Details: MITS data]
Specific Gravity 1.260 [Ref Std: WATER=1]
pH Not Applicable
Melting point No Data Available
Solubility in Water Nil
Evaporation rate Not Applicable
Volatile Organic Compounds Not Applicable
Volatile Organic Compounds Approximately 43 g/l [Test Method: tested per EPA method 24A]
Percent volatile 0.00 % weight [Details: CONDITIONS: @room temperature]
VOC Less H2O & Exempt Solvents Approximately 32 g/l [Test Method: tested per EPA method 24A]
Viscosity 40000 - 80000 centipoise

SECTION 10. STABILITY AND REACTIVITY

Stability: Stable.
Materials and Conditions to Avoid: Heat is generated during cure. Do not cure a mass larger than 50
grams in a confined space to prevent a premature reaction
(exothem) with production of intense heat and smoke.

Hazardous Polymerization: Hazardous polymerization will not occur.

Hazardous Decomposition or By-Products
Substance Condition
Aldehydes During Combustion
Hydrocarbons During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Ketones During Combustion
Toxic Vapor, Gas, Particulate During Combustion
 SECTION 11. TOXICOLOGICAL INFORMATION

Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.

SECTION 12. ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION: Not determined.

CHEMICAL FATE INFORMATION: Not determined

SECTION 13. DISPOSAL CONSIDERATIONS

Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill. As a disposal
alternative, dispose of waste product in a facility permitted to accept chemical waste.
Since regulations vary, consult applicable regulations or authorities before disposal.

SECTION 14. TRANSPORT INFORMATION

Not regulated per U.S. DOT, IATA or IMO.

SECTION 15. REGULATORY INFORMATION

US FEDERAL REGULATIONS
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No
Immediate Hazard - Yes Delayed Hazard - No

SECTION 16. OTHER INFORMATION

NFPA Hazard Classification

Health: 2 Flammability: 0 Reactivity: 1 Special Hazards: None
DISCLAIMER
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However,
Longtong Chemical does not assume responsibility for any results obtained by persons over whose methods Longtong
Chemical has no control. It is the user's responsibility to determine the suitability of Longtong Chemical'
Chemical's products or any
production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the
protection of property and persons against any hazards that may be involved in the handling and use of any of Longtong
Chemical
Chemical's products. In light of the foregoing, Longtong Chemical specifically disclaims all warranties, express or implied,
including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Longtong Chemical 's
products. Longtong Chemical further disclaims any liability for consequential or incidental damages of any kind, including lost
profits.