Shipbuilding

 JIS F 0014:2000
Glossary of terms for shipbuilding (hull part -piping)
 JIS F 0301:1990
Schemes of thermal insulation of piping for small ships
 JIS F 0414:1996
Shipbuilding - internal wirings and pipings of engine control console
 JIS F 0506:1996
Shipbuilding - applications of copper pipes
 JIS F 0507:1992
Small ships - steel pipes - application
 JIS F 2007:1976
Mooring pipes
 JIS F 2030:1978
Single point mooring pipes
 JIS F 3016:1996
Shipbuilding - cast iron pipe sleeve type expansion joints
 JIS F 3017:1996
Shipbuilding - cast steel pipe sleeve type expansion joints
 JIS F 3993:1996
Discharge pipes for dredger
 JIS F 3994:1996
Floaters of discharge pipes for dredger
 JIS F 3995:1991
Rubber sleeves for dredge discharge pipes
 JIS F 7008:1996
Standard specification of thermal insulation for piping
 JIS F 7101:1993
Pipes of ship's machinery - standard velocity of flow
 JIS F 7102:1989
Application for gaskets and packings to piping system in machinery
space
 JIS F 7435:1996
Shipbuilding - brass 30K unions with bite joints
 JIS F 7436:1996
Shipbuilding - copper tube 10K brazed unions
 JIS F 7437:1996
Shipbuilding - copper tube 10K screwed unions
 JIS F 7438:1996
Shipbuilding - steel pipe 10K welding type unions
 JIS F 7439:1996
Shipbuilding - steel pipe 10K screwed unions
 JIS F 7440:1996
Shipbuilding - copper pipe 20K brazed type unions
 JIS F 7441:1996
Shipbuilding - copper pipe 20K screwed unions
 JIS F 7442:1996
Shipbuilding - steel pipe 40K welded unions
 JIS F 7443:1996
Shipbuilding - steel pipe 40K screwed unions
  JIS F 7444:1996
Shipbuilding - steel pipe 100K welded unions
 JIS F 7445:1996
Shipbuilding - steel pipe 100K screwed unions

ASTM STANDARD

Steel--Piping, Tubing, Fittings

A0053_A0053M-04A Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A0105_A0105M-03 Specification for Carbon Steel Forgings for Piping Applications
A0106_A0106M-04B Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A0134-96R01 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A0135-01 Specification for Electric-Resistance-Welded Steel Pipe
A0139_A0139M-04 Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A0178_A0178M-02 Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler
and Superheater Tubes
A0179_A0179M-90AR01 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and
Condenser Tubes
A0181_A0181M-01 Specification for Carbon Steel Forgings, for General-Purpose Piping
A0182_A0182M-04A Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings,
and Valves and Parts for High-Temperature Service
A0192_A0192M-02 Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A0193_A0193M-04B Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature
Service
A0194_A0194M-04A Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High
Temperature Service, or Both
A0209_A0209M-03 Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A0210_A0210M-02 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A0213_A0213M-04B Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-
Exchanger Tubes
A0214_A0214M-96R01 Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser
Tubes
A0234_A0234M-04 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and
High Temperature Service
A0249_A0249M-04A Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and
Condenser Tubes
A0250_A0250M-04 Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A0252-98R02 Specification for Welded and Seamless Steel Pipe Piles
A0254-97R02 Specification for Copper-Brazed Steel Tubing
A0268_A0268M-04A Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for
General Service
A0269-04 Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A0270-03A Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary
Tubing
A0312_A0312M-04B Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel
Pipes
A0320_A0320M-04 Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature
Service
A0333_A0333M-04A Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A0334_A0334M-04A Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature
Service
A0335_A0335M-03 Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A0350_A0350M-04A Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing
for Piping Components
A0358_A0358M-04 Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for
High-Temperature Service and General Applications
A0369_A0369M-02 Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature
Service
A0370-03A Test Methods and Definitions for Mechanical Testing of Steel Products
A0376_A0376M-04 Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A0381-96R01 Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A0403_A0403M-04 Specification for Wrought Austenitic Stainless Steel Piping Fittings
A0409_A0409M-01 Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-
Temperature Service
A0420_A0420M-04 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-
Temperature Service
A0423_A0423M-95R04 Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A0426_A0426M-02 Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A0437_A0437M-04 Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-
Temperature Service
A0450_A0450M-04A Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel
Tubes
A0451_A0451M-02 Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A0453_A0453M-04 Specification for High-Temperature Bolting Materials, with Expansion Coefficients
Comparable to Austenitic Stainless Steels
A0498-04 Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A0500-03A Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and
Shapes
A0501-01 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A0511-04 Specification for Seamless Stainless Steel Mechanical Tubing
A0512-96R01 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A0513-00 Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A0519-03 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A0522_A0522M-01 Specification for Forged or Rolled 8 and 9\% Nickel Alloy Steel Flanges, Fittings, Valves, and
Parts for Low-Temperature Service
A0523-96R01 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure
Pipe-Type Cable Circuits
A0524-96R01 Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A0530_A0530M-04A Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A0539 Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
A0540_A0540M-04 Specification for Alloy-Steel Bolting Materials for Special Applications
A0554-03 Specification for Welded Stainless Steel Mechanical Tubing
A0556_A0556M-96R01 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A0587-96R01 Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A0589-96R01 Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A0595-04A Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A0608_A0608M-02 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure
Application at High Temperatures
A0618_A0618M-04 Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural
Tubing
A0632-04 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General
Service
A0660-96R01 Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A0671-04 Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A0672-96R01 Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate
Temperatures
A0688_A0688M-04 Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A0691-98R02 Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at
High Temperatures
A0694_A0694M-03 Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts
for High-Pressure Transmission Service
A0707_A0707M-02 Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A0714-99R03 Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A0727_A0727M-02 Specification for Carbon Steel Forgings for Piping Components with Inherent Notch
Toughness
A0733-03 Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A0751-01 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A0758_A0758M-00 Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch
Toughness
A0771_A0771M Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-
Cooled Reactor Core Components
A0774_A0774M-02 Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive
Service at Low and Moderate Temperatures
A0778-01 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A0787-01 Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A0789_A0789M-04A Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General
Service
A0790_A0790M-04A Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A0795_A0795M-04 Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel
Pipe for Fire Protection Use
A0803_A0803M-03 Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A0813_A0813M-01 Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A0814_A0814M-03 Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A0815_A0815M-04 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping
Fittings
A0822_A0822M-04 Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A0826_A0826M Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-
Cooled Reactor Core Components
A0836_A0836M-02 Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and
Pressure Vessel Service
A0847-99AR03 Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing
with Improved Atmospheric Corrosion Resistance
A0851 Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes
A0858_A0858M-00 Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive
Service
A0860_A0860M-00 Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A0865-03 Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for
Use in Steel Pipe Joints
A0872_A0872M-04 Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive
Environments
A0908-03 Specification for Stainless Steel Needle Tubing
A0928_A0928M-04 Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with
Addition of Filler Metal
A0941-04A Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A0943_A0943M-01 Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A0949_A0949M-01 Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A0953-02 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing
A0954-02 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
A0960_A0960M-04A Specification for Common Requirements for Wrought Steel Piping Fittings
A0961_A0961M-04A Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts
for Piping Applications
A0962_A0962M-04 Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both,
Intended for Use at Any Temperature from Cryogenic to the Creep Range
A0972_A0972M-00R04 Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A0984_A0984M-03 Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A0988_A0988M-98R02E01 Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and
Parts for High Temperature Service
A0989_A0989M-98R02E01 Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and
Parts for High Temperature Service
A0994-03 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related
Alloys
A0999_A0999M-04A Specification for General Requirements for Alloy and Stainless Steel Pipe
A1005_A1005M-00R04 Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double
Submerged-Arc Welded
A1006_A1006M-00R04 Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
A1012-02 Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat
Exchanger Tubes With Integral Fins
A1014-03 Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service
A1015-01 Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016_A1016M-04A Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and
Stainless Steel Tubes
A1020_A1020M-02 Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler,
Superheater, Heat Exchanger and Condenser Applications
A1024_A1024M-02 Specification for Steel Line Pipe, Black, Plain-End, Seamless
E0527-83R03 Practice for Numbering Metals and Alloys (UNS)

ISO - Pipe, Tube and Fittings Standards and Specifications

International Organization for Standardization - ISO - pipe, tube and fittings standards and specifications

Industrial pipe, tube and fittings standards and specifications from the ISO - International Organization for
Standardization:

 ISO 7-1:1994-05
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and
designation
 ISO 7-2:2000
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit
gauges
 ISO 49:1994
Malleable cast iron fittings threaded to ISO 7-1
 ISO 228-1:2000
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and
designation
 ISO 228-2:1987
Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit
gauges
 ISO 264:1976
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; Laying lengths;
Metric series
 ISO 265-1:1988
Pipes and fittings of plastics materials; fittings for domestic and industrial waste pipes; basic dimensions:
metric series; part 1: unplasticized poly(vinyl chloride) (PVC-U)
 ISO 392:1986
Asbestos-cement pipe fittings for building and sanitary purposes
 ISO 580:1990
Injection-molded unplasticized poly(vinyl chloride) (PVC-U) fittings; oven test; test method and basic
specifications
 ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C)
or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
 ISO 727-2:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C)
or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based
series
 ISO 881:1980
Asbestos-cement pipes, joints, fittings/sewage/drain
 ISO 1179:1981
Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
 ISO 1635-2:1987
Seamless wrought copper and copper alloy tube
 ISO 1651:1974
Tube drawing mandrels
 ISO 1684:1975
Wire, bar and tube drawing dies; Specifications
 ISO 2016:1981
Capillary solder fittings for copper tubes; Assembly dimensions and tests
 ISO 2035:1974
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under
pressure; Pressure-resistance test
 ISO 2044:1974
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with
pressure pipe; Hydraulic internal pressure test
 ISO 2048:1990
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing
ring type joints; minimum depths of engagement
 ISO 2284:1987
Hand taps for parallel and taper pipe threads; General dimensions and marking
 ISO 2507-1:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
 ISO 2507-2:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized
poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high
impact resistance poly(vinyl chloride) (PVC-HI) pipes
 ISO 2507-3:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for
acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
 ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications
 ISO 2804:1996
Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions
 ISO 2851:1993
Stainless steel bends and tees for the food industry
 ISO 2852:1993
Stainless steel clamp pipe couplings for the food industry
 ISO 3183-1:1996
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 1:
Pipes of requirement class A
 ISO 3183-2:1996
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2:
Pipes of requirements class B
 ISO 3253:1998
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
 ISO/TR 3313:1998
Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-
measurement instruments
 ISO 3419:1981
Non-alloy and alloy steel butt-welding fittings
 ISO 3458:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under
internal pressure
 ISO 3459:1976
Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test
method and requirement
 ISO 3477:1981
Polypropylene (PP) pipes and fittings - density
 ISO 3501:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out
 ISO 3503:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under
internal pressure when subjected to bending
 ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density
 ISO 3545-1:1989
Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular
cross-section
 ISO 3545-2:1989
Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections
 ISO 3545-3:1989
Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section
 ISO 3586:1976
Glass plant, pipeline and fittings; general rules for testing, handling and use
 ISO 3587:1976
Glass plant, pipeline and fittings; Pipeline and fittings of nominal bore 15 to 150 mm; Compatibility and
interchangeability
 ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints;
Pressure test for leakproofness
 ISO 3604:1976
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints;
Pressure test for leakproofness under conditions of external hydraulic pressure
 ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -
Unplasticized poly(vinyl chloride) (PVC-U)
 ISO 4056:1978
Polyethylene (PE) pipes and fittings- designation
 ISO 4059:1978
Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test and
requirements
 ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths
and size of threads; Metric series
 ISO 4144:2003
Pipework - Stainless steel fittings threaded in accordance with ISO 7-1
 ISO 4145:1986
Non-alloy steel fittings threaded to ISO 7/1
 ISO 4230:1987
Hand- and machine-operated circular screwing dies for taper pipe threads; R series
 ISO 4231:1987
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
 ISO 4397:1993
Fluid power systems and components; connectors and associated components; nominal outside diameters
of tubes and nominal inside diameters of hoses
 ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density
 ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications -
Part 1: General
 ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications -
Part 2: Pipes (with or without integral sockets)
 ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications -
Part 3: Fittings and joints
 ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications -
Part 5: Fitness for purpose of the system
 ISO 4435:2003
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl
chloride) (PVC-U)
 ISO 4440-1:1994
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method
 ISO 4440-2:1994
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions
 ISO 4451:1980
Polyethylene (PE) pipes and fittings - determinati
 ISO 4483:1979
Asbestos-cement pipelines; Field pressure testing
 ISO 4486:1985
Asbestos-cement ventilation ducts and fittings; Dimensions and characteristics
 ISO 4488:1979
Asbestos-cement pipes and joints for thrust-boring and pipe jacking
 ISO 4704:1977
Glass plant, pipeline and fittings; Glass plant components
 ISO/TR 5168:1998
Measurement of fluid flow - Evaluation of uncertainties
 ISO 5251:1981
Stainless steel butt-welding fittings
 ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal
tar derived materials
 ISO 5361:1999
Anaesthetic and respiratory equipment - Tracheal tubes and connectors
 ISO 5730:1992
Stationary shell boilers of welded construction (other than water-tube boilers)
 ISO 5969:1979
Ground thread taps for pipe threads G series and Rp series; Tolerances on the threaded portion
 ISO 6207:1992
Seamless nickel and nickel alloy tube
 ISO 6447:1983
Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material
 ISO 6448:1985
Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material
 ISO 6455:1983
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under
pressure; Dimensions of laying lengths; Metric series
 ISO 6594:1983
Cast iron drainage pipes and fittings; Spigot series
 ISO 6605:2002
Hydraulic fluid power - Hoses and hose assemblies - Test methods
 ISO 6761:1981
Steel tubes; Preparation of ends of tubes and fittings for welding
 ISO 6964:1986
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test
method and basic specification
 ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
 ISO 7228:1993
Tracheal tube connectors
 ISO 7245:1984
Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and
extrusion materials
 ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and
extrusion materials
 ISO 7268:1983
Pipe components; Definition of nominal pressure
 ISO 7278-2:1988
Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters;
part 2: pipe provers
 ISO 7279:1984
Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series;
Dimensions of sockets
 ISO 7370:1982
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified
diameters and standard lengths
 ISO 7387-1:1983
Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test
methods
 ISO 7608:1985
Shipbuilding; Inland navigation; Couplings for disposal of oily mixture and sewage water
 ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -
Polypropylene (PP)
 ISO 7675:2003
Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings -
Chlorinated poly(vinyl chloride) (PVC-C)
 ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -
Acrylonitrile-butadiene-styrene (ABS)
 ISO 7686:1992
Plastics pipes and fittings; opacity; test method
 ISO 8142:1990
Thermal insulation; bonded preformed man-made mineral fiber pipe sections; specification
 ISO 8283-1:1991
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1:
unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
 ISO 8283-2:1992
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2:
polyethylene (PE)
 ISO 8283-3:1992
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3:
polypropylene (PP)
 ISO 8283-4:1992
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 4:
acrylonitrile/butadiene/styrene (ABS)
 ISO 8361-1:1991
Thermoplastics pipes and fittings; water absorption;
part 1: general test method
 ISO 8361-2:1991
Thermoplastics pipes and fittings; water absorption;
part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
 ISO 8361-3:1991
Thermoplastics pipes and fittings; water absorption;
part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
 ISO 8434-1, :1994
Metallic tube connections for fluid power and general use -
Part 1: 24° compression fittings
 ISO 8434-2:1994
Metallic tube fittings for fluid power and general use -
Part 2: 37° flared fittings
 ISO 8434-3:1995
Metallic tube connections for fluid power and general use -
Part 3: O-ring face seal fittings
 ISO 8434-4:1995
Metallic tube connections for fluid power and general use -
Part 4: 24° cone connectors with O-ring weld-on nipples
 ISO 8434-5:1995
Metallic tube connections for fluid power and general use -
Part 5: Test methods for threaded hydraulic fluid power connections
 ISO 8491:1998
Metallic materials - Tube (in full section) - Bend test
 ISO 8492:1998
Metallic materials - Tube - Flattening test
 ISO 8493:1998
Metallic materials - Tube - Drift-expanding test
 ISO 8494:1998
Metallic materials - Tube - Flanging test
 ISO 8495:1998
Metallic materials - Tube - Ring-expanding test
 ISO 8496:1998
Metallic materials - Tube - Ring tensile test
 ISO 8497:1994
Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for
circular pipes
 ISO 8572:1991
Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to
pressure, including relationships between them, and terms for installation and jointing
 ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -
Polyethylene (PE)
 ISO 8772:1991
High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems;
specifications
 ISO 8773:1991
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications
 ISO 8796:2004
Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking
induced by insert-type fittings - Test method and requirements
 ISO 9080:2003
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics
materials in pipe form by extrapolation
 ISO 9095:1990
Steel tubes; continuous character marking and colour coding for material identification
 ISO 9261:2004
Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods
 ISO 9356:1989
Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method
 ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of
threads - Metric series
 ISO 9625:1993
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
 ISO 9691:1992
Rubber; recommendations for the workmanship of pipe joint rings; description and classification of
imperfections
 ISO 9803:1993
Vacuum technology; pipeline fittings; mounting dimensions
 ISO/TR 9824-1:1990
Measurement of free surface flow in closed conduits;
part 1: methods
 ISO 9808:1990
Solar water heaters; elastomeric materials for absorbers, connecting pipes and fittings; method of
assessment
 ISO/TR 9824-2:1990
Measurement of free surface flow in closed conduits;
part 2: equipment
 ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing
test
 ISO 10147:1994
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by
determination of the gel content
 ISO/TR 10358:1993
Plastics pipes and fittings; combined chemical-resistance classification table
 ISO 10400:1993
Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe
properties
 ISO 10420:1994
Petroleum and natural gas industries; flexible pipe systems for subsea and marine riser applications
 ISO 10422:2001
Petroleum and natural gas industries - Threading, gauging and thread inspection of casing, tubing and line
pipe
 ISO 10508:1995
Thermoplastics pipes and fittings for hot and cold water systems
 ISO 10806:2003
Pipework - Fittings for corrugated metal hoses
 ISO/TR 10837:1991
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
 ISO 10928:1997
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for
regression analysis and their use
 ISO 10931-1:1997
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 1: General
 ISO 10931-2:1997
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 2: Pipes
 ISO 10931-3:1996
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 3: Fittings
 ISO 10931-4:1997
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 4: Valves
 ISO 10931-5:1998
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 5: Fitness for
purpose of the system
 ISO/TR 11295:1992
Techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings
 ISO 11413:1996
Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an
electrofusion fitting
 ISO 11414:1996
Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies
by butt fusion
 ISO 11420:1996
Method for the assessment of the degree of carbon dispersion polyolefin pipe, fittings and compounds
 ISO 11496:1993
Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of
laminar imperfections
 ISO/TR 11647:1996
Fusion compatibility of polyethylene (PE) pipes and fittings
 ISO 11961:1996
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
 ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation -
Overall service (design) coefficient
 ISO 13664:1997
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for
the detection of laminar imperfections
 ISO 13665:1997
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for
the detection of surface imperfections
 ISO 13761:1996
Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at
temperatures above 20
 ISO 13783:1997
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket
joints - Test method for leaktightness and strength while subjected to bending and internal pressure