المواصفات العالميه

) 1 (
2006

) 1 (

589
) 1 (
2006

-= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 1 (
Standard Specification for Pipe, Steel Black and Hot-Dipped, Zinc-
Coated, Welded and Seamless.
ASTM A53:2004

Standard Specification for Seamless Carbon Steel Pipe for
High-Temperature Service.
ASTM A106:2004

Standard Specification for Electric-Resistance-Welded Steel Pipe. ASTM A135:2005
Standard Specification for Black and Hot-Dipped Zinc-Coated
(Galvanized)Welded and Seamless Steel Pipe for Fire Protection Use.
ASTM A795:2004

Screwed and socketed steel tubes and tubulars and for plain and steel
tubes suitable for welded or for screwing to BS 21 pipe thread.
BS1387:1990
Seamless and welded steel tubes-General tables of dimensions and
masses per unit length.
BS EN 10220:2003

-= ) 1 / 1 2 (
Standard Specification for Seamless Copper Water Tube. ASTM B88:2003
Standard Specification for General Requirements for Wrought Seamless
Copper ad Copper-Alloy Tube.
ASTM B251:2002

Standard Specification for Seamless Copper Tube. ASTM B75:2002

-= ) 1 / 1 3 (
ASTM A53:2004

Standard Specification for Seamless Carbon Steel Pipe for High-
Temperature Service.
ASTM A106:2004
BS 1387:1990

-= ) 1 / 1 4 (
Steel Water Pipe-6 in. (150mm) and Larger. ANSI/AWWA C200:1997
Welded and Seamless Wrought Steel Pipe. ASME B36.10M:2004
ASTM A53:2004

BS 1387:1990

Seamless steel tubes for pressure purposes. Technical delivery
conditions. Non-alloy steel tubes with specially room temperature
properties.
BS EN 10216-1:2002

Welded steel tubes for pressure. Technical delivery conditions. Non-
alloy steel tubes with specified room temperature properties.
BS EN 10217-1:2002

-= ) 1 / 1 5 (
Standard Specification for Electric-Resistance-Welded Steel Pipe. ASTM A135:2005

ASTM A53:2004
Metallic industrial piping. General. BS EN 13480-1:2002
Metallic industrial piping. Materials. BS EN 13480-2:2002
Metallic industrial piping. Design and calculation. BS EN 13480-3:2002
Metallic industrial piping. Fabrication and installation. BS EN 13480-4:2002
Metallic industrial piping. Inspection and testing. BS EN 13480-5:2002
properties.
BS EN 10216-1:2002

BS EN 10217-1:2002

Seamless and welded steel tubes General tables of dimensions and
BS EN 10220:2003
591
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--
-= ) 1 / 1 6 (
Steel Water Pipe-6 in. (150mm) and Larger. ANSI/AWWA C200:1997

-= ) 1 / 1 7 (
ASTM A53:2004

-= ) 1 / 1 8 (
Copper and copper alloys Seamless, round tubes for heat exchangers. BS EN 12451:1999

-= ) 1 / 1 9 (
Ductile-Iron Pipe, Centrifugally Cast, for Water. ANSI/AWWA C151/A21.51:
2002
Ductile iron pipes, fittings, accessories and their joints for water
pipelines. Requirements and test methods.
BS EN 545:1995

Specification for cast iron spigot and socket drain pipes and fittings. BS 437:1978

-= ) 1 / 1 10 (
Ductile-Iron Pipe, Centrifugally Cast, for Water. ANSI/AWWA C151/ A21.51:2002

-= ) 1 / 1 11 (
Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water. ANSI/AWWA
C104/A21.4:2003

-= ) 1 / 1 12 (
BS EN 545:1995

-= ) 1 / 1 13 (
Standard Specification for Forged or Rolled Alloy and Stainless Steel
Pipe Flanges, Forged Fitting, and Valves Parts for High-Temperature
Service.
ASTM A182:2004

-= ) 1 / 1 14 (
ASTM A53:2004

Standard Specification for Electric-Resistance-Welded Steel Pipe ASTM A135:2005
Specification for screwed and socketed steel tubes and tubulars and for
plain end steel tubes suitable for welding or for screwing to BS 21 pipe
thread.
BS 1387:1985

-= ) 1 / 1 15 (
ASTM A53:2004

ASTM A106:2004

-= ) 1 / 1 16 (
Service.
ASTM A182:2004

-= ) 1 / 1 17 (
ASTM A53:2004
thread.
BS 1387:1985
BS EN 10217-1:2002

592
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--
-= ) 1 / 1 18 (
Standard Specification for Carbon Steel Bolts and Studs, 60000 PSI
Tensile Strength.
ASTM A307:2004

properties.
BS EN 10216-1:2002

Welded steel tubes for pressure purposes. Technical delivery conditions.
Non-alloy and alloy steel tubes with specified elevated temperature
properties.
BS EN 10216-2: 2002

BS EN 10217-l:2002

Electrical welded non-alloy and alloy steel tubes with specified elevated
temperature properties.
BS EN 10217-2: 2002

-= ) 1 / 1 19 (
Service.
ASTM A182:2004

-= ) 1 / 1 20 (
ASTM B251:2002


-= ) 1 / 1 21 (
thread.
BS 1387:1985

properties.
BS EN 10216-1:2002

BS EN 10217-1:2002

-= ) 1 / 1 22 (
Service.
ASTM A182:2004

-= ) 1 / 1 23 (
ASTM A53:2004


ASTM A106:2004

-= ) 1 / 1 24 (
BS EN 545:1995

-= ) 1 / 1 25 (


ASTM B251:2002
593
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--
-= ) 1 / 1 26 (
ASTM A53:2004

ASTM A106:2004
thread.
BS 1387:1985
BS EN 10217-1:2002

-= ) 1 / 1 27 (
ASTM A53:2004
conditions. Non-alloy and alloy steel tubes with specified low
BS EN 10216-4:2002

Welded steel tubes for pressure purpose. Technical delivery conditions.
Electrical welded non-alloy steel tubes with specified low temperature
purpose.
BS EN 10217-4:2002

-= ) 1 / 1 28 (
conditions. Non-alloy and alloy steel tubes with specified low
BS EN 10216-4:2002

Welded steel tubes for pressure purpose. Technical delivery conditions.
Electrical welded non-alloy steel tubes with specified low temperature
purpose.
BS EN 10217-4:2002

-= ) 1 / 1 29 (
ASTM A53:2004

-= ) 1 / 1 30 (
Malleable Iron Threaded Fittings, 150 and 300 Ib. ASME B16.3:1998
Factory-Made Wrought Butt welding Fittings. ASME B16.9:2003
Standard Specification for Piping Fittings of Wrought Carbon Steel and
Alloy Steel for Moderate and High Temperature Service.
ASTM A234:2005

Threaded pipe fittings in malleable cast iron and cast copper alloy. BS 1256:2000
Threaded pipe fittings in malleable cast iron. DIN 10242:1995

-= ) 1 / 1 31 (
Wrought Steel Butt welding Short Radius Elbows and Returns. ASME B16.28:1994
ASTM A234:2005

Specification for steel butt-welding pipe fittings for the petroleum
industry. Wrought carbon and ferric alloy steel fittings. Metric units.
BS 1640-3:1968

Specification for steel pipe fittings, screwed and socket-welding for the
petroleum industry.
BS 3799:1974
Butt-welding pipe fittings. Wrought carbon steel for general use and
without specific inspection requirements.
BS EN 10253-1:1999
594
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 32 (
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300,
400, 600, 900, 1500 and 2500.
ASME B16.24:2001
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings ASME B16.22:2001
Cast Copper Alloy Solder Joint Pressure Fittings ASME B16.18:2001
Copper and copper alloys. Plumbing fittings. Fittings with ends for
capillary soldering or capillary brazing to copper tubes.
BS EN 1254-1:1998
Copper and copper alloys. Plumbing fittings. Fittings with compression
ends for use with copper tubes.
BS EN 1254-2:1998

-= ) 1 / 1 3 3 (
Malleable Iron Threaded Fittings. 150 and 300 Ib. ASME B16.3:1998
Gray Iron Threaded Fittings- classes 125 and 250. ASME B16.4:1998
Specification for butt-welding pipe fittings for pressure purposes. Caron
steel.
BS 1965-1:1963
BS EN 10253-1:1999

-= ) 1 / 1 34 (
Ductile-Iron Pipe, Centrifugally Cast, for Water. ANSI/AWWA C151/A21.15:2002
Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded
Flanges.
ANSI/AWWA C115/A21.15:1999
Steel Pipe Flanges for Waterworks Service-Sizes 4 in. Through 144
in.(100 mm Through 3600 mm).
ANSI/AWWA C207:2002
Cast Iron Pipe Flanges and Flanged Fittings ASME B16.1:1998
Pipe Flanges and Flanged Fittings NPS
1/2
Through NPS 24 metric/inch
Standard.

ASME B16.5:2003
Standard Specification for Carbon Steel Forging for General-Purpose
Piping.
ASTM A181:2001
Specification for cast iron flanged fittings. BS 2035:1966
BS EN 545:2002

Specification for class-II arc welding carbon steel pipe-work for carrying
fluids.
BS 2971:2001

Specification for grey iron pipes and fittings. BS 4622:1970

-= ) 1 / 1 (35
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300,
400, 600, 900, 1500 and 2500.
ASME B16.24:2001

-= ) 1 / 1 36 (
Service.
ASTM A182:2004

595
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 37 (
Ductile-Iron and Gray-Iron Fittings for Water. ANSI/AWWA C110/A21.10:2003
Ductile-Iron Pipe, Centrifugally Cast, for Water. ANSI/AWWA C151/A21.51:2002
Steel Pipe Flanges for Waterworks Service-Sizes 4 in. Through 144 in.
(100 mm Through 3600 mm).
ANSI/AWWA C207:2002

Gray Iron Threaded Fittings classes 125 and 250. ASME B16.4:1998
Non-metallic Flat Gaskets for Pipe Flanges. ASME B16.21:2005
Cast Copper Alloy Fittings For Flared Copper Tubes. ASME B16.26:1998
Standard Specification for Ductile Iron Castings. ASTM A536:2004
Specification for grey iron pipes and fittings. BS 4622:1970
BS EN 545:2002
Ductile Iron Pipes, Fittings, Accessories and their Joints for Water or
Gas Applications.
ISO 2531:1998

-= ) 1 / 1 38 (
Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings. ANSI /AWWA C111/A21.11:2000
Nonmetallic Flat Gaskets for Pipe Flanges. ASME B16.21:2005
Standard Specification for Alloy-Steel and Stainless Steel Bolting
Materials for High-Temperature Service.
ASTM A193:2004
Tensile Strength.
ASTM A307:2004

Materials for Low-Temperature Service.
ASTM A320:2004

Standard Specification for Gray Iron Castings for Valves, Flanges, and
Pipe Fittings.
ASTM A126:2004
Elastomeric seals. Materials requirements for seals used in pipes and
fittings carrying gas and hydrocarbon fluids.
BS 682:2002

Specification for metal washers for general engineering purposes. BS 3410:1961
Specification for metal washers for general engineering purposes.
Metric series.
BS 4320:1998
Flanges and their joints-caskets for PN-designated flanges-spiral wound
gaskets for use with steel flanges.
EN 1514-2:1997

-= ) 1 / 1 39 (
Standard Specification for Steel Castings, Carbon, Suitable for Fusion
Welding, for High-Temperature Service.
ASTM A216:2004

Specification for butt-welding pipe fittings pressure purposes. Carbon
steel.
BS 1965-1:1963

BS EN 10253-1:1999

-= ) 1 / 1 40 (
Specification for elastomeric seals for joints in pipe-work and pipelines. BS 2492:1990

-= ) 1 / 1 41 (
Service.
ASTM A182:2004

-= ) 1 / 1 42 (
Specification for Welding Procedure and Performance Qualification. AWS B2.1:2005
596
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 43 (
Pipe Threads, General Purpose (inch). ASME B1.20.1:2001
Specification for Welding Procedure and Performance Qualification. AWS B2.1:2005
Steel threaded pipe fittings. BS EN 10241:2000
Pipe threads where pressure tight joints are made on the threads. Taper
external threads and parallel internal threads. Dimensions, tolerances
and designation.
BS EN 10226-1:2004
Pipe threads where pressure-tight joints are not made on the threads.
Dimensions, tolerances and designation.
ISO 228-1:2003

-= ) 1 / 1 44 (
ASTM A234-2005
Specification for butt-welding pipe fittings for pressure purposes.
Carbon steel.
BS 1965-1:1963

Steel threaded pipe fittings. EN 10241-2000
EN 10253-1:1999
Threaded pipe fittings in malleable cast iron. DIN 10242:1995

-= ) 1 / 1 45 (
Standard Specification for Carbon Steel Forging for General-Purpose
Piping.
ASTM A181:2001

-= ) 1 / 1 46 (
ASTM A234:2005

Standard Specification for Ferric Ductile Iron Pressure-Retaining
Casting for Use at Elevated Temperatures.
ASTM A395:2004

Malleable Iron Threaded Fittings, Classes 150 and 300.
ASME B16.3:1998
1/2
standard.
ASME B16.5:2003
Specification for steel pipe fittings, screwed and socket-welding for the
petroleum industry.
BS 3799:1998

-= ) 1 / 1 47 (
Standard Specification for Cupola Malleable Iron. ASTM A197:2000
ASTM A234:2005

Standard Specification for Ferric Ductile Iron Pressure-Retaining
Casting for Use at Elevated Temperatures.
ASTM A395:2004
ISO metric screw threads. Principles and basic data. BS 3643-1:2004
ISO metric screw threads. Specification for selected limits of size. BS 3643-2:2004
Steel threaded pipe fittings. BS EN 10241:2000

-= ) 1 / 1 48 (
Wrought copper and copper alloy solder joint pressure fittings. ASME B16.22:2001
Standard Specification for Seamless Copper Water Tube Type K. ASTM B88:2003
Cast Copper Alloy Solder Joint Drainage Fittings-DWV ASME B16.23:2002

-= ) 1 / 1 49 (
Specification for Filler Metals for Brazing and Braze Welding. AWS A5.8:2004
597
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 50 (
1/2
standard.
ASME B16.5:2003
Specification for copper alloy globe, globe stop and check, check and
gate valves.
BS 5154-1991

Specification for draw-off taps and stop-valves for water Services
(screw-down pattern). Draw-off taps and above-ground stop-valves.
BS 1010-2:1973

Valves for water-works purposes. Predominantly key-operated cast iron
gate valves. Code of practice.
BS 5163-1:2004

Valves for water-works purposes. Stem caps for use on isolating valves
and associated water control apparatus. Specification.
BS 5163-2:2004

Specification for cast iron carbon steel ball valves for general purposes. BS 5159-1991
Industrial valves copper alloy gate valves. BS EN 12288-2003
Industrial valves. Steel gate valves. BS EN 1984-2000
Industrial valves. Cast iron gate valves. BS EN 1171-2002

-= ) 1 / 1 51 (
Standard Specification for Chromium and Chromium-Nickel Stainless
Steel Plate, Sheet, and Strip for Pressure Vessels and for General
Applications.
ASTM A240:2005
gate valves.
BS 5154:1991

Industrial valves copper alloy gate valves. BS EN 12288:2003
Industrial valves. Cast iron globe valves. BS EN 13789:2002

-= ) 1 / 1 52 (
Specification for steel check valves (flanged and butt-welding ends) for
the petroleum, petrochemical and allied industries.
BS 1868:1991
Industrial valves. Cast iron check valves. BS EN 12334:2001
Industrial valves. Steel globe and globe stop and check valves. BS EN 13709:2002

-= ) 1 / 1 53 (
Laboratory thermometers. BS EN 593:1998
Rubber-Seated Butterfly Valves. ANSI/AWWA C504:2000

-= ) 1 / 1 54 (
Industrial valves. Cast iron gate valves. BS EN 1171:2002

-= ) 1 / 1 55 (
Industrial valves. Cast iron gate valves. BS EN 1171;2002
Valves for water-works purposes. Predominantly key-operated cast iron
valves. Code of practice.
BS 5163-1:2004

Valves for water-works purposes. Stem caps for use on isolating valves
and associated water control apparatus. Specification.
BS 5163-2:2004

Valves for water supply. Fitness for purpose requirements and
appropriate verification tests. General requirements.
BS 1074-1:2000

Valves for water supply. Fitness for purpose requirements and
appropriate verification tests. Isolating valves.
BS 1074-2:2000

-= ) 1 / 1 56 (
Float operated valves. Specification for piston type float operated
valves (copper alloy body) (excluding floats).
BS 1212-1:1990

Float operated valves. Specification for diaphragm type float operated
valves (copper alloy body) (excluding floats).
BS 1212-2:1990

Float operated valves. Specification for diaphragm type float operated
valves (plastics bodied) for cold water services only (excluding floats).
BS 1212-3:1990

598
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 57 (
Industrial valves. Diaphragm valves made of metallic materials. BS EN 13397:2002

-= ) 1 / 1 58 (
Safety devices for protection against excessive pressure. Safety valves. BS EN ISO 4126-1:2004
Safety devices for protection against excessive pressure. Controlled
safety pressure relief systems (CSPRS).
BS EN ISO 4126-5:2004
Automatic control valves - Pressure relief, safety and regulating valves
for pressure above 4 bar up to 16 bar.
DIN 3394-1:2004

-= ) 1 / 1 59 (
Standard Specification for Composition Bronze or Metal Casting. ASTM B62:2002

-= ) 1 / 1 60 (
gate vales.
BS 5154:1991
Industrial valves copper alloy gate valves. BS EN 12288:2003
Valves Flanged, Threaded and Welding End. ASME B16.34:2004

-= ) 1 / 1 61 (
Specification for floats for ball-valves (copper). BS 1968:2000
Specification for floats (plastics) for float operated valves for cold
water services.
BS 2456:1990

-= ) 1 / 1 62 (
Solenoid Valves for Use with Volatile Refrigerators ARI 760:2001

-= ) 1 / 1 63 (
Industrial valves. Cast iron check valves. BS EN 12334-2001

-= ) 1 / 1 64 (
Cold-Water Meters-Turbine Type, for Customer Service. ANSI/AWWA C701-2002
Pressure Gauges and Gauge Attachments. ASME B40.100-1998
Pressure gauges. Bourdon tubes pressure gauges. Dimensions,
metrology, requirements and testing.
EN 837-1:1998

-= ) 1 / 1 65 (
Measurement of Fluid Flow by Means of Pressure Differential Devices
Inserted in Circular Cross-Section Conduit Running Full. General
Principles and Requirements.
ISO 5167-1:2003

Inserted in Circular Cross-Section Conduit Running Full. Orifice Plates.
ISO 5167-2:2003

Inserted in Circular Cross-Section Conduit Running Full. Nozzles and
Venturi Nozzles.
ISO 5167-3:2003

Measurement of fluid flow by means of pressure differential devices
inserted in circular cross-section conduits running full. Venturi tubes.
ISO 5167-4:2003

-= ) 1 / 1 66 (
Specification for pressure and vacuum switches. BS 6134:1991

-= ) 1 / 1 67 (
Valves for hydraulic fluid power systems. Methods for determining
pressure differential/flow characteristics.
BS 4062-1:1982

599
) 1 (
2006

'- -= ) 1 1 ( '-~;- V J~-- V '--

-= ) 1 / 1 68 (
Specification for Welding Procedure and Performance Qualification. ANSI/AWS B2.1:2005
Pipe Threads, General Purpose (inch). ASME B1-20.1:2001
Specification for un-sintered PTFE tape. General requirements. BS 7786:1995
Seamless and welded steel tubes - General tables of dimensions and
DIN EN 10220:2003

-= ) 1 / 1 69 (
Field Welding of Steel Water Pipe. ANSI/AWWA C206-1997
Austenitic Chromium-Nickel Stainless Steel Piping and Tubing,
Recommended Practices for Welding.
ANSI/AWS D10.4:2000
Recommended Practices for Welding of Chromium-Molybdenum Steel
Piping and Tubing.
ANSI/AWS D10.8:1996

Welding of Pipelines and Related Facilities - 20th Edition. API STD 1104:1999
Welded and Seamless Wrought Steel Pipe. ASME B36.10M:2004
Welding consumables. Covered electrodes for manual metal arc
welding of non alloy and fine grain steels. Classification.
BS EN 499:1995
Specification for filler materials for gas welding. BS 1453:1972
Welding consumables. Rod for gas welding of non alloy and creep-
resisting steel. Classification.
BS EN 12536:2000

Specification for class-I oxy-acetylene welding of ferric steel pipe-
work for carrying fluids.
BS 1821:1982
Specification for class-I arc welding of ferric steel pipe-work for
carrying fluids.
BS 2633:1987
Specification for class-II oxy-acetylene welding of carbon steel pipe-
work for carrying fluid.
BS 2640:1982
Specification for class-II welding of carbon steel pipe-work for
carrying fluids.
BS 2971:1991

-= ) 1 / 1 70 (
Cement-Mortar Protective Lining and Coating for Steel Water Pipe-
4in. (100mm) and Larger-Shop Applied.
ANSI/AWWA C205:2000
Nonmetallic Flat Gaskets for Pipe Flanges. ASME B16.21:2005
Materials for High-Temperature Service.
ASTM A193:2004

Standard Specification for Gray Iron Castings for Valves, Flanges, and
Pipe Fittings.
ASTM A126:2004

Tensile Strength.
ASTM 307:2004

Materials for Low-Temperature Service.
ASTM A320:2004
Specification for metal washers for general engineering purposes. BS 3410:1961
ISO metric black hexagon bolts, screws and nuts. Specification. BS 4190:2001
Specification for metal washers for general engineering purposes.
Metric series.
BS 4320:1968
Flanges and their joints. Dimensions of gaskets for PN-designated
flanges. Non-metallic flat gaskets with or without inserts.
BS EN 1514-1:1997

Flanges and their joints-caskets for PN-designated flanges-spiral
wound gaskets for use with steel flanges.
BS EN 1514-2:1997

-= ) 1 / 1 71 (
Power Piping. ASME B31.1:2004
600
) 1 (
2006

'- -= ) 1 1 ( '-~;- ~-- V '-- V J

-= ) 1 / 1 72 (
Tensile Strength.
ASTM A307:2004

Standard Specification for Cupola Malleable Iron. ASTM A197:2000
ISO metric precision hexagon bolts, screws and nuts. Specification. BS 3692:2001
ISO metric black hexagon bolts, screws and nuts. Specification. BS 4190:2001

-= ) 1 / 1 73 (
Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water. ANSI/AWWA C104:2004
Cement-Mortar Protective Lining and Coating for Steel Water Pipe-
4in. (100mm) and Larger-Shop Applied.
ANSI/AWWA C205:2001

Cement-Mortar Lining of Water Pipe Lines in Place-4in. (100mm) and
Larger.
ANSI/AWWA C602:2000
Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
American Water Works Association.
ANSI/AWWA C104/A21.3:2003

-= ) 1 / 1 74 (
Polyethylene Encasement for Ductile-Iron Pipe Systems. AWWA C105:1999

-= ) 1 / 1 75 (
Coal-Tar Protective Coatings and Linings for Steel Water Pipelines-
Enamel and Tape-Hot Applied.
AWWA C203:2002

-= ) 1 / 1 76 (
Paints and varnishes. Terms and definitions for coating materials.
General terms.
BS EN 971-1:1996

welding of creep-resisting steels. Classification.
BS EN 1599:1997
welding of high strength steels. Classification.
BS EN 757:1997

-= ) 1 / 1 77 (
Specification for colours for identification, coding and special
purposes.
BS 381C:1996

-= ) 1 / 1 78 (
Steel Pipe. A Guide for Design and Installation. AWWA M11:2005
601
) 1 (
2006

-= ) 1 2 ( '-~;- V J~-- -'-- '--

-= ) 2 / 1 1 (
Building Code Requirements for Structural Plain Concrete and
Commentary - Only available as part of ACI 318-99.
ACI 318.1-89/318.1R:1989

-= ) 2 / 1 2 (
Welded Steel Tanks for Water Storage. ANSI/AWWA D100:1996

-= ) 2 / 1 3 (
Factory-Coated Bolted Steel Tanks for Water Storage. ANSI/AWWA D103:1997

-= ) 2 / 1 (4
ASME Boiler and Pressure Vessel Code (BPVC) CODE Cases: CCB
BPV; Boiler and Pressure Vessels.
ASME BPVC:2004
602
) 1 (
2006

-= ) 1 3 ( '-~;- -'-- '-- -'-- J~--

-= ) 2 / 2 1 (
Standard Specification for Casting Iron-Chromium, Iron-Chromium-
Nickel, Corrosion Resistant for General Application.
ASTM A743:2003

Standard Specification for Casting, Iron-Chromium-Nickel, Corrosion
Resistant for Severe Service.
ASTM A-744:2004

-= ) 2 / 2 2 (
Arc welding equipment. Coupling devices for welding cables. BS EN 60974-12:1996
Arc welding equipment. Wire feeders. BS EN 60974-5:2002

-= ) 2 / 2 3 (
Flanges and their joints. Circular flanges for pipes, valves, fittings and
accessories, PN Designated. Steel flanges.
BS EN 1092-1:2002

Flanges and their joints Bolting. Selection of Bolting. BS EN 1515-1:2000
Flanges and their joints. Circular flanges for pipes, valves, fittings and
accessories, PN designated. Aluminium alloy flanges
BS EN 1092-4:2002

End-Suction Centrifugal Pumps (rating 16 Bar) Designation,
Nominal Duty Point and Dimensions.
ISO 2858:1975

-= ) 2 / 2 4 (
Steel Drums Non-Removable Head (Tight Head) Drums with a
Minimum Total Capacity of 216,5 l.
EN 210:1999

-= ) 2 / 2 5 (
Centrifugal, mixed flow and axial pumps. Code for hydraulic
performance tests. Precision class.
BS EN ISO 5198:1999
603
) 1 (
2006

-= ) 1 4 ( -~;- ' ~-'-- '-- -'-- J~--

-= ) 3 / 2 1 (
Specification for first aid reel hoses for fire-fighting purposes. BS 3169-1986
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for
pumps and vehicles.
EN 1947:2002

Fire-fighting hoses. Semi-rigid hoses for fixed systems. EN 694:2001

-= ) 3 / 2 2 (
Fire extinguishing installations and equipment on premises. Guide for
the selection of installed systems and other fire equipment.
BS 5306:1986

-= ) 3 / 2 3 (
Fixed firefighting systems. Hose systems. Hose reels with semi-rigid
hose.
BS EN 671-1:2001

Fixed firefighting systems. Hose systems. Hose systems with lay-flat
hose.
BS EN 671-2:2001

Fixed firefighting systems. Maintenance of hose reels with semi-rigid
hose and hose systems with lay-flat hose.
BS EN 671-3:2001

-= ) 3 / 2 4 (
Fire-fighting hoses. Semi-rigid hoses for fixed systems. BS EN 694:2001
hose.
BS EN 671-2:2001

-= ) 3 / 2 5 (
Fire extinguishing installations and equipment on premises. Guide for
the selection of installed systems and other fire equipment.
B S 5306:1986

Fixed firefighting systems. Hose systems. Hose reels with semi-rigid
hose.
BS EN 671-1:2001

hose.
BS EN 671-2:2001

Fixed firefighting systems. Maintenance of hose reels with semi-rigid
hose and hose systems with lay-flat hose.
BS EN 671-3:2001

Specification for first aid reel hoses for fire-fighting purposes. BS 3169:1986
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for
pumps and vehicles.
BS EN 1947:2002

Fire-fighting hoses. Semi-rigid hoses for fixed systems. BS EN 694:2001
604
) 1 (
2006

-= ) 1 5 ( '-~;- ~-'-- J~-- ~-'-- '--

= - ) 3 / 3 1 (
Specification for fire hose couplings ancillary equipment. BS 336:1989

-= ) 3 / 3 2 (
Fire hydrant systems equipment. Specification for landing valves for
wet risers.
BS 5041-1:1987

Fire hydrant systems equipment. Specification for landing valves for
dry risers.
BS 5041-2:1987

Fire hydrant systems equipment. Specification for inlet breechings for
dry riser inlet.
BS 5041-3:1975

Fire hydrant systems equipment. Boxes for landing valves for dry
risers.
BS 5041-4:1975

Fire hydrant systems equipment. Specification for boxes for foam inlet
and dry riser inlets.
BS 5041-5:1974

605
) 1 (
2006

-= ) 1 6 ( '-~;- J~-- ~-'-- '-- ,-

-= ) 3 / 4 1 (
Dry-Barrel Fire Hydrants. ANSI/AWWA C502:1994

-= ) 3 / 4 2 (
Specification for fire hose couplings ancillary equipment. BS 336:1989

-= ) 3 / 4 3 (
Specification for underground fire hydrants and surface box frames and
covers.
BS 750:1984
606
) 1 (
2006

-= ) 1 7 ( '-~;- '-- ,- J~-- V

-= ) 4 / 1 1 (
Cast Iron Pipe Flanges and Flanged Fittings Classes 25, 125 and 250. ASME B16.1:1998
Flanges. General Statements, Survey. DIN 2500:2003

-= ) 4 / 1 2 (
Specification for pipe threads for tubes and fittings where pressure-
tight joints are made on the threads (metric dimensions).

BS 21:1985
607
) 1 (
2006

-= ) 1 8 ( '-~;- '-- ,- J~-- '~-

-= ) 4 / 6 1 (
Transportable gas containers. Specification for seamless steel gas
containers above 0.5 liter water capacity.
BS 5045-1:2000

Transportable gas containers. Specification for steel containers
above of 0.5 L up to 450 L water capacity with welded seams.
BS 5045-2:2000

Transportable gas containers. Specification for seamless aluminum
alloy gas containers above 0.5 liter water capacity and up to 300 bar
charge pressure at 15
o
C.
BS 5045-3:2000

Transportable gas containers. Specification for aluminum alloy
containers above 0.5 liter up to 130 liters water capacity with
welded seams.
BS 5045-5:2000

Transportable gas containers. Specification for seamless steel gas
containers of water capacity 0.5 L up to 15 L for special portable
applications.
BS 5045-7:2000

Transportable gas containers. Specification for seamless aluminum
alloy gas containers of water capacity 0.5 L up to 15 L and up to
300 bar charged pressure at 15
o
C for special portable applications.
BS 5045-8:2000

-= ) 4 / 6 2 (
Fire extinguishing installations and equipment on premises. Guide
for the selection of installed systems and other fire equipment.
BS 5306:1986
608
) 1 (
2006

-= ) 1 9 ( '-~;- '-- ,- J~-- '~-

-= ) 4 / 7 1 (
Coated, Welded and Seamless
ASTM A53:2004
Temperature Service
ASTM A-106:2004
Grade A,B OR C

609
) 1 (
2006

-= ) 1 10 ( '-~;- '-- ,- J~-- '--

-= ) 4 / 9 1 (
ASME Boiler & Pressure Vessel Code - Section VIII - Pressure
Vessels - COMPLETE 3-Volume SET (VIII-DIV 1, VIII-DIV 2, VIII-
DIV3).
ASME Section VIII SET:2004

-= ) 4 / 9 2 (
Standard Specification for Solder Metal. ASTM B32:2004
Standard Specification for General Requirements for Wrought
Seamless Copper and Copper-Alloy Tube.
ASTM B251:2002
Standard Specification for Liquid and Paste Fluxes for Soldering
Applications of Copper and Copper-Alloy Tube.
ASTM B813:2000
Specification for Filler Metals for Brazing and Braze Welding
(Classification BCuP-3 or BCuP-4).
ANSI/AWS A5.8/A5.8M:2004
Standard Specification for Seamless and Welded Austenitic Stainless
Steel Tubing for General Service.
ASTM A269:2004

Standard Specification for Seamless and Welded Austenitic Stainless
Steel Tubing (Small-Diameter) for General Service.
ASTM A632:2004

Standard Specification for Welded, Un-annealed Austenitic Stainless
Steel Tubular Products.
ASTM A778:2001

Standard Specification for Seamless and Welded Ferritic/Austenitic
Stainless Steel Tubing for General Service.
ASTM A789/A789M:2005b

-= ) 4 / 9 3 (
Cast Copper Alloy Solder Joint Pressure Fittings. ANSI B16.18:2001
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings ANSI B16.22:2001
Standard Specification for Castings, Austenitic, Austenitic-Ferritic
(Duplex) for Pressure-Containing Parts.
ASTM A351/A351M:2005

Standard Specification for Wrought Austenitic Stainless Steel Piping
Fittings.
ASTM A403/A403M:2004
Standard Specification for As-Welded Wrought Austenitic Stainless
Steel Fittings for General Corrosive Service at Low and Moderate
Temperatures.
ASTM A774/A774M:2002
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and
Martensitic Stainless Steel Piping Fittings.
ASTM A815/A815M:2004

ASME Boiler and Pressure Vessel Code - Section IX: Welding and
Brazing Qualifications.
ASME Section IX:2004

610
) 1 (
2006

-= ) 1 11 ( '-~;- '-- Q-'=- J~-- V

-= ) 5 / 1 1 (
Fire detection and fire alarm systems. Heat detectors. Point
detectors.
BS EN 54-5:2001

611

المواصفات العالميه

Uploaded by

Copyright:

Available Formats

المواصفات العالميه

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

المواصفات العالميه

Uploaded by

Copyright:

Available Formats

) 1 (

You might also like