ABOUT USB INTERFACE

How USB Ports Work

by Marshall Brain › Introduction to How USB Ports Work
› What is USB?
› Running Out of Ports?
› Behind the Scenes
› USB 2.0
› Lots More Information
› Shop or Compare Prices

Just about any computer that you buy today comes with
one or more Universal Serial Bus connectors on the
back. These USB connectors let you attach everything
from mice to printers to your computer quickly and easily.
The operating system supports USB as well, so the
installation of the device drivers is quick and easy, too.
Compared to other ways of connecting devices to your
computer (including parallel ports, serial ports and special
cards that you install inside the computer's case), USB
devices are incredibly simple!

In this article, we will look at USB ports from both a user and a technical standpoint. You will
learn why the USB system is so flexible and how it is able to support so many devices so
easily -- it's truly an amazing system!

What is USB?
Anyone who has been around computers for more than two or three years knows the
problem that the Universal Serial Bus is trying to solve -- in the past, connecting devices to
computers has been a real headache!

• Printers connected to parallel printer ports, and most computers only came with one.
Things like Zip drives, which need a high-speed connection into the computer, would
use the parallel port as well, often with limited success and not much speed.
• Modems used the serial port, but so did some printers and a variety of odd things like
Palm Pilots and digital cameras. Most computers have at most two serial ports, and
they are very slow in most cases.
• Devices that needed faster connections came with their own cards, which had to fit in
a card slot inside the computer's case. Unfortunately, the number of card slots is
limited and you needed a Ph.D. to install the software for some of the cards.

The goal of USB is to end all of these headaches. The Universal Serial Bus gives you a
single, standardized, easy-to-use way to connect up to 127 devices to a computer.

Just about every peripheral made now comes in a USB version. A sample list of USB
devices that you can buy today includes:
 • Printers
• Scanners
• Mice
• Joysticks
• Flight yokes
• Digital cameras
• Webcams
• Scientific data acquisition devices
• Modems
• Speakers
• Telephones
• Video phones
• Storage devices such as Zip drives
• Network connections

Connecting a USB device to a computer is simple -- you find the USB connector on the back
of your machine and plug the USB connector into it.

The rectangular socket is a typical USB socket on the back of a PC.

A typical USB connector, called an "A" connection

If it is a new device, the operating system auto-detects it and asks for the driver disk. If the
device has already been installed, the computer activates it and starts talking to it. USB
devices can be connected and disconnected at any time.

Many USB devices come with their own built-in cable, and the cable has an "A" connection
on it. If not, then the device has a socket on it that accepts a USB "B" connector.

A typical "B" connection

The USB standard uses "A" and "B" connectors to avoid confusion:

• "A" connectors head "upstream" toward the computer.

• "B" connectors head "downstream" and connect to individual devices.

By using different connectors on the upstream and downstream end, it is impossible to ever
get confused -- if you connect any USB cable's "B" connector into a device, you know that it
will work. Similarly, you can plug any "A" connector into any "A" socket and know that it will
work.

Running Out of Ports?

Most computers that you buy today come with one or two USB sockets. With so many USB
devices on the market today, you easily run out of sockets very quickly. For example, on the
computer that I am typing on right now, I have a USB printer, a USB scanner, a USB
Webcam and a USB network connection. My computer has only one USB connector on it, so
the obvious question is, "How do you hook up all the devices?"

The easy solution to the problem is to buy an inexpensive USB hub. The USB standard
supports up to 127 devices, and USB hubs are a part of the standard.
 A typical USB four-port hub accepts 4 "A" connections.

A hub typically has four new ports, but may have many more. You plug the hub into your
computer, and then plug your devices (or other hubs) into the hub. By chaining hubs
together, you can build up dozens of available USB ports on a single computer.

Hubs can be powered or unpowered. As you will see on the next page, the USB standard
allows for devices to draw their power from their USB connection. Obviously, a high-power
device like a printer or scanner will have its own power supply, but low-power devices like
mice and digital cameras get their power from the bus in order to simplify them. The power
(up to 500 milliamps at 5 volts) comes from the computer. If you have lots of self-powered
devices (like printers and scanners), then your hub does not need to be powered -- none of
the devices connecting to the hub needs additional power, so the computer can handle it. If
you have lots of unpowered devices like mice and cameras, you probably need a powered
hub. The hub has its own transformer and it supplies power to the bus so that the devices do
not overload the computer's supply.
Behind the Scenes
The Universal Serial Bus has the following features:

• The computer acts as the host.

• Up to 127 devices can connect to the host, either directly or by way of USB hubs.
• Individual USB cables can run as long as 5 meters; with hubs, devices can be up to
30 meters (six cables' worth) away from the host.
• With USB 2.,the bus has a maximum data rate of 480 megabits per second.
• A USB cable has two wires for power (+5 volts and ground) and a twisted pair of
wires to carry the data.
• On the power wires, the computer can supply up to 500 milliamps of power at 5 volts.
• Low-power devices (such as mice) can draw their power directly from the bus. High-
power devices (such as printers) have their own power supplies and draw minimal
power from the bus. Hubs can have their own power supplies to provide power to
devices connected to the hub.
• USB devices are hot-swappable, meaning you can plug them into the bus and
unplug them any time.
• Many USB devices can be put to sleep by the host computer when the computer
enters a power-saving mode.

The devices connected to a USB port rely on the USB cable to carry power and data.

Inside a USB cable: There are two wires for power -- +5 volts
(red) and ground (brown) -- and a twisted pair (yellow and
blue) of wires to carry the data. The cable is also shielded.

When the host powers up, it queries all of the devices connected to the bus and assigns
each one an address. This process is called enumeration -- devices are also enumerated
when they connect to the bus. The host also finds out from each device what type of data
transfer it wishes to perform:

• Interrupt - A device like a mouse or a keyboard, which will be sending very little
data, would choose the interrupt mode.
• Bulk - A device like a printer, which receives data in one big packet, uses the bulk
transfer mode. A block of data is sent to the printer (in 64-byte chunks) and verified
to make sure it is correct.
• Isochronous - A streaming device (such as speakers) uses the isochronous mode.
Data streams between the device and the host in real-time, and there is no error
correction.

The host can also send commands or query parameters with control packets.

As devices are enumerated, the host is keeping track of the total bandwidth that all of the
isochronous and interrupt devices are requesting. They can consume up to 90 percent of the
480 Mbps of bandwidth that is available. After 90 percent is used up, the host denies access
to any other isochronous or interrupt devices. Control packets and packets for bulk transfers
use any bandwidth left over (at least 10 percent).

The Universal Serial Bus divides the available bandwidth into frames, and the host controls
the frames. Frames contain 1,500 bytes, and a new frame starts every millisecond. During a
frame, isochronous and interrupt devices get a slot so they are guaranteed the bandwidth
they need. Bulk and control transfers use whatever space is left. The technical links at the
end of the article contain lots of detail if you would like to learn more.

USB 2.0
The standard for USB version 2.0 was released in April 2000 and serves as an upgrade for
USB 1.1.

USB 2.0 (High-speed USB) provides additional bandwidth for multimedia and storage
applications and has a data transmission speed 40 times faster than USB 1.1. To allow a
smooth transition for both consumers and manufacturers, USB 2.0 has full forward and
backward compatibility with original USB devices and works with cables and connectors
made for original USB, too.

Supporting three speed modes (1.5, 12 and 480 megabits per second), USB 2.0 supports
low-bandwidth devices such as keyboards and mice, as well as high-bandwidth ones like
high-resolution Webcams, scanners, printers and high-capacity storage systems. The
deployment of USB 2.0 has allowed PC industry leaders to forge ahead with the
development of next-generation PC peripherals to complement existing high-performance
PCs. The transmission speed of USB 2.0 also facilitates the development of next-generation
PCs and applications. In addition to improving functionality and encouraging innovation, USB
2.0 increases the productivity of user applications and allows the user to run multiple PC
applications at once or several high-performance peripherals simultaneously.