Kto12 BASIC EDUCATION CURRICULUM

TECHNOLOGY AND LIVELIHOOD EDUCATION

INDUSTRIAL ARTS MECHANICAL DRAFTING
(Exploratory)
Course Description:

This Module is an exploratory and introductory course which leads to Mechanical Drafting National Certificate Level II (NC II). It covers five common
competencies that a Grade 7/Grade 8 Technology and Livelihood Education (TLE) student ought to possess, namely: 1) using tools, equipment and
paraphernalia; 2) performing mensuration and calculation; 3) practicing Occupational Health and Safety (OHS) procedures; 4) maintaining tools, equipment
and paraphernalia and; 5) interpreting technical drawing and plans.
The preliminaries of this exploratory course include the following: 1) discussion on the relevance of the course; 2) explanation of key concepts relative
to the course and; 3) exploration on career opportunities.

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES

Introduction The learner demonstrates The learner independently Explain basic concepts in
Basic concepts in Mechanical understanding of basic concepts and demonstrates common competencies mechanical drafting
Drafting underlying theories in mechanical in mechanical drafting as prescribed Discuss the relevance of the
Relevance of the course drafting. in the TESDA Training Regulation. course
Career opportunities Explore on opportunities for
mechanical drafting as a career

LESSON 1: PREPARE BASIC MATERIALS AND TOOLS

Basic Drafting tools The learner demonstrates The learner independently prepares *LO 1. Prepare tools, materials
Materials, and understanding of concepts and appropriate drafting tools, materials and instruments in Mechanical
Instruments. underlying principles in the and instruments based on job Drafting
preparation of drafting tools, requirements. Classify tools and equipment
materials and instruments. according to functions
Prepare tools and materials
based on job requirement

Procedure in accomplishing
forms: *LO 2. Inspect tools and materials
Job order slips received in Mechanical Drafting
Tools and materials Prepare a list of tools and
requisition slips materials to be requested
Borrowers slip according to job requirement
Requisition Procedures Request tools and materials
according to prepared list

K to 12 Curriculum Guide version as of July 19, 2012 TLE IA MECHANICAL DRAFTING *LO Learning Outcome 1
 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES
considering the workshop
procedure
Inspect the condition of tools,
materials requested

LESSON 2: PERFORM MENSURATION AND CALCULATION

Systems of Measurement The learner demonstrates The learner independently performs *LO 1. Carryout the required
English understanding of concepts and accurate measurements and measurements and calculations
Metric underlying principles in performing calculation based on given tasks. Read and interpret
Conversion of Measurements measurements and calculation. measurements in both metric
Scaling and English
Reduction Convert measurements
Enlargement English to metric
Reproduction Metric to English
Compute/Calculate the
following using basic
mathematical processes:
Size and proportion of the
area to be used.
Calculate the size and
proportion of the design to be:
Enlarged
Reduced
Reproduced

Measuring tools/Instruments Select appropriate measuring

tool/instruments to be used in
accordance with job
requirements
Select the right substitute for
unavailable measuring
instruments

Measuring Tools/instrument Select appropriate measuring

Regular and irregular shapes of tools/instruments based on job
objects and areas requirement
K to 12 Curriculum Guide version as of July 19, 2012 TLE IA MECHANICAL DRAFTING *LO Learning Outcome 2
 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES
Measure sizes of areas to be
used
Use scale in converting sizes
Calculate the amount of
materials to be used in a
particular job requirement

LESSON 3: INTERPRET WORKING PLANS/DESIGNS

Alphabet of lines The learner demonstrates The learner independently reads and *LO 1. Read and interpret work
Architectural symbols understanding of concepts and interprets simple blueprints and plans and product designs.
Dimensions underlying principles in interpreting product design specifications. Classify alphabet of lines
Notations and Specifications simple blueprints and product according to its purpose.
Types of Pictorial Presentations designs. Differentiate architectural
Blueprints and Product designs symbols
Read and interpret the
following:
Illustrated product
designs.
Details of simple work
plans.
Simple shop layout
Notations and
specifications of materials
used

LESSON 4: MAINTAIN FUNCTIONALITY OF TOOLS AND EQUIPMENT

Classification of tools and The learner demonstrates The learner independently performs *LO 1. Check condition of tools
equipment: understanding of concepts and proper maintenance of Drafting tools, and equipment.
Functional underlying principles in the materials and instruments. Classify tools and equipment
Non-functional maintenance of Drafting tools and according to functions.
equipment. Evaluate the condition of tools
and equipment.
Segregate functional from
non-functional.
Label each item based on
the result of the evaluation

K to 12 Curriculum Guide version as of July 19, 2012 TLE IA MECHANICAL DRAFTING *LO Learning Outcome 3
 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES

Maintenance of Tools and *LO 2. Perform basic preventive

Equipment maintenance
Sharpening Sharpen dull tools and
Oiling equipment
Repairing Perform simple repair of tools
Cleaning Materials and and equipment
procedure Use appropriate lubricants for
Types of lubricants tools and equipment with
Proper Storage of Drafting moving parts
tools, materials and instrument. Clean tool, materials and
equipment
Provide storage for tools,
Drafting materials and
instruments

Inventory of tools, materials and *LO 3. Store Tools and Equipment

equipment Perform an inventory of tools,
Safekeeping and storage materials and instrument
Inspect the condition of all
items before storing
Store tools, materials and
equipment according to the
manufacturers specifications

LESSON 5: PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURES

Threshold limit values (TLV) The learner demonstrates The learner independently applies *LO 1. Control Hazards and risks.
TLV Table understanding of concepts and precautionary measures and Observe safe working habits
Philippine OHS underlying principles of Occupational responds to risks and hazards in the while at work
Standards Health and Safety in relation to health workplace. Read and interpret signage in
Hazardous Occupations to and risk hazards in the workplace. the workplace
young workers Use personal protective
Effects of hazards in the equipment while at work
workplace Apply first aid in case of
Ergonomics accidents
ECC Regulations
Housekeeping
K to 12 Curriculum Guide version as of July 19, 2012 TLE IA MECHANICAL DRAFTING *LO Learning Outcome 4
 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES
Observe proper housekeeping:
Cleanliness and
orderliness in the
workplace
Proper waste disposal

K to 12 Curriculum Guide version as of July 19, 2012 TLE IA MECHANICAL DRAFTING *LO Learning Outcome 5