BRP 768847 - Riggingcatalog PDF

Table of Contents
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index
Table of Contents
Evinrude E-TEC G2 ..................................................................................................................................3

Evinrude
Digital Shift & Throttle............................................................................................................................39 E-TEC G2
Digital Gauges & MWS ...........................................................................................................................59
SystemCheck Gauges & MWS .................................................................................................................87 Digital Shift

& Throttle
Portable 4-Stroke................................................................................................................................... 117
i-Dock Joystick System.......................................................................................................................... 123 Digital

Gauges &
Rigging Accessories .............................................................................................................................. 129 MWS
Fuel & Oil Systems ............................................................................................................................... 151

SystemCheck
Steering ................................................................................................................................................ 165 Gauges
& MWS
Propellers.............................................................................................................................................. 171
Oil & Engine Care ................................................................................................................................. 187 Portable

4-Stroke
Reference Drawings & Info.................................................................................................................... 191
Part Number Index ................................................................................................................................ 211 i-Dock

Joystick
Alphabetical Index ................................................................................................................................ 217 System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index
Table of Contents
Evinrude E-TEC G2 Rigging Essentials

DIGITAL CONTROL DOES NOT NEED TO BE EXPENSIVE
NEW ICON II CONTROL SYSTEMS ARE PERFECTLY SUITED TO DELIVER AN EXCEPTIONAL
DRIVING EXPERIENCE AND NOT BREAK THE BANK
Innovation and simplicity in two styles fitting Evinrude E-TEC G2 engines 150-300HP.
The result is legendary ICONTM digital control and advanced engineering for a new generation of Evinrude
E-TEC G2 outboards.
Table of Contents
Rigging Kit, ICON TM II Concealed Side Mount

Select STM ICON TM II rigging kit for engine, boat and instrumentation applications targeting basic shift and throttle capability.
769011 - Concealed Side Mount Control Rigging Kit Includes: 5009752 control and 587344 harness, 5009792, control handle,
359257, handle cover, 764605, remote control cover, 764606, mounting base kit, 764610, mount hardware kit, 587174, 20 foot EST
backbone harness, 587184, 15 foot power cable to battery, 764163, 25 foot NMEA backbone harness, 764161, 6 foot extension harness,
767433, power node & tee, 2-764151 tee and 764155 terminator.
Note: Requires additional selection of accessory ignition switch kit. Refer to ignition switch section.
Refer to ICON TM G2 Connection Diagram for recommended layout and connections.
Step 1
P/N Description Pack qty
769011 Concealed Side Mount Rigging Kit 1
Rigging Kit, ICON TM II Single Engine Binnacle Control

769010 - Single Top Mount Binnacle Control Rigging Kit Includes: 5009776 control and 587345 harness, 5009792, control handle,
587175 25 foot EST backbone harness, 587184, 15 foot power cable to battery, 764163, 25 foot NMEA backbone harness, 764161, 6
foot extension harness, 767433, power node & tee, 2-764151 tee and 764155 terminator.
Step 1
769010 Single Engine, Top Mount Rigging Kit 1
Table of Contents
Ignition Switches
Select an ignition switch and stop switch configuration to match application requirement.
Step 2
Evinrude E-TEC G2 Ignition Switches-Single Engine
768746 768844
768841
Step 2
768841 Switch kit, vertical, single engine, Key off/on/start and EMS 1
768746 Switch kit, horizontal, single engine, key off/on/start and EMS 1
768844 Switch kit, square, Single engine, key off/on/start and EMS 1
768843 Switch kit, Single engine, Ign switch and EMS - no panel 1
Evinrude E-TEC G2 Ignition Switches-Dual Engine
768748
768846
768866
Step 2
768846 Switch kit, vertical, 2 eng., Key off/on, EMS and Rocker panel 1
768748 Switch kit, horizontal, 2 eng, Key off/on, EMS and rocker panel 1
768866 Switch kit, square, 2 eng., Key off/on, EMS and Rocker panel 1
Evinrude E-TEC G2 Ignition Switches - 3 and 4 Engines
768747 768845
768842
Step 2
768842 Switch kit, vertical, 3-4 eng., Key off/on and EMS 1
768747 Switch kit, horizontal, 3-4 eng., Key off/on and EMS 1
768845 Switch kit, square, 3-4 eng., key off/on and EMS lanyard 1
Table of Contents
Lanyard - Replacement for Emergency Stop Switches

Used in original equipment and accessory control boxes. Point of Purchase Packaged
432230
176288

432230 Replacement Lanyard 1995 & Older (POP) 1
176288 Replacement Lanyard - 1996 & newer (POP) 1
Evinrude E-TEC G2 Ignition Switches - Replacement Parts

5010161 Ignition switch panel assy Off/on/start 1
5010162 Ignition switch panel assy Off/on 1
5010164 Key switch assy, no panel 1
5010165 Stop switch and lanyard - no panel 1
5010166 Panel, emergency stop switch assy and lanyard 1
5010167 Extension harness, 36" (915mm), ignition to ems 1
5010168 Extension harness, 36" (915mm), dual rocker to control 1

Table of Contents
ICON TM Touch 7.0 Color Touch Screen (CTS)

ICON TM Touch 7.0 CTS features , f u l l - c o l o r 7 - i n c h t o u c h s c r e e n .
D e s i g n e d f o r E v i n r u d e E - T E C G2.
Major functions and support include:

Color Touch Screen - Easy to access information in multiple ways.
1, 2, 3 or 4 engine support.
Mode control for adjustments to power steering, trim assist and for
concealed side mount, switching between hand and foot throttle
operation.
Fuel tank levels up to 4 tanks.
Engine oil level and accessory oil tank levels.
Water tank levels up to 3 tanks / 3 water types.
Accessory display of engine water pressure, depth, SOW and water
temperatures of sea water, live well and bait well.
Multi-language English, French, Italian, German, Spanish.
Descriptive text for fault codes and procedures.
Predefined, six screen groupings:

Home page - general cruising and performance information including
RPM, trim level, engine water temperature, fuel economy MPG, fuel
consumption GPH with and boat speed.
Engine page - in-depth monitoring of one or up to 4 engines.
Fuel/Fluids page - precise readouts of fuel levels up to 4 tanks, engine
oil levels and water tanks.
Vessel page - accurate readouts of battery voltage, boat speed, and
fuel economy.
Trip Logs page - regarding trip distance, fuel economy, average speed
and more.
Eco View page - allows the user to optimize engine throttle and trim
adjustment for instant changes and the most efficient operation.
A status bar is always visible with gear position, GPS clock, active throttle,
and fault notifications.
Installation Requirements:
Surface mount dimensions - 10 / 25.4cm wide x 6 / 15.24cm tall.
Includes drill template, mounting hardware and GPS antenna.

766284 ICON TM Touch 7.0 CTS - single, twin, triple or quad engines 1
768459 Replacement Bezel, ICONTM Touch 7.0 CTS 1
768399 Sun Cover, ICONTM Touch 7.0 CTS 1

ICON TM Touch 4.3 CTS features, f u l l - c o l o r 4 . 3 - i n c h t o u c h s c r e e n .

1 or 2 engine support.
operation.
Water tank levels up to 1 tank / 1 water type.
temperatures of sea water, live well and bait well.
Predefined, 6 screen groupings:

RPM, trim level, engine water pressure, fuel economy MPG, fuel
consumption GPH and boat speed.
Engine page - in-depth monitoring of one or up to 2 engines.
fuel economy.
Trip Logs page - trip distance, fuel economy, average speed and more.
Eco View page - allows the user to optimize engine throttle and trim
The status bar is always visible with gear position, GPS clock, active
throttle, and fault notifications.
Surface mount dimensions - 7.5/ 19.05cm wide x4/ 10.16cm tall.
Includes drill template, mounting hardware and GPS antenna.

766285 ICON TM Touch 4.5 CTS - single or twin engines 1
768458 Replacement Bezel, ICONTM Touch 4.3 CTS 1

Table of Contents
ICON TM 3.5 Color Screen-Single Engine

ICON TM 3.5 CS features a full-color 3.5-inch screen. Designed
for Evinrude E-TEC G2.
Color Screen - Easy to access information.
1 engine support.
operation.
Accessory display of engine water pressure.
Notification of faults and recovery actions.
Predefined, intuitive and uncluttered design arranges engine and boat

systems information via 5 screen groupings:
Home page - with two modes: one for general cruising information and
another for just basic information such as RPM, trim level, engine water
pressure and boat speed.
Engine page - in-depth monitoring of one Evinrude E-TEC G2
outboard.
Fuel/Fluids page - precise readouts of fuel levels up to 2 tanks and
engine oil levels.
Vessel page - accurate readouts on battery voltage, boat speed, and
fuel economy.
Trip Logs page - offers detailed information regarding trip distance, fuel
economy, average speed and more.
Eco View page - fuel management information allows the user to optimize
engine throttle and trim adjustment for instant changes and the most
efficient operation.
Surface mount dimensions - 4/ 10.16cm wide x 4/ 10.16cm tall.
Fits standard 3 3/8 round hole.

767750 ICONTM Touch 3.5 C Single Engine 1
768151 ICONTM Touch 3.5 C Single Engine with GPS antenna 1
768401 Sun Cover, ICONTM Touch 3.5 Color 1
E-Link Virtual Dashboard

Convenience of a Virtual Dashboard on your Mobile Device Direct control of important engine features:
Provide engine mode adjustment including i-Trim engine
Evinrude E-TEC G2 engine data displayed on a mobile trim control, Dynamic Power Steering level adjustment and
phone or table: winterization.
Plug and play Wi-Fi connection to engine and vessel via NEMA Concierge features includes links to find a dealer and
2000 network.. Evinrude E-Nation social media site with option to forward
Displays engine information including RPM, fuel flow, trim engine data to your dealer via e-mail.
position, oil level and more. An alternative to traditional marine instrumentation:
Displays vessel and accessory information including fuel levels, Provides the same information and functionality available
battery voltage, water depth and more. through Evinrude ICON digital marine gauges.
Provides ECO View function to monitor average fuel economy,
estimated range and instantaneous fuel use to maximize boat
efficiency.
Purchase includes the Evinrude E-Link Wi-Fi module and a

free App download with no membership or subscription fees.
768403

768403 E-Link Mobile Dashboard 1
Table of Contents
Tie Bars, Steering-Kicker/Auxiliary Outboard Steering Kit

Install this kit on Evinrude E-TEC G2 200-300 HP 74 V6
(3.4 L) Dynamic Power Stering (DPS) models only. DO NOT
install on any other models.
Allows steering of the auxiliary outboard by the main engine.
Designed to fit Evinrude 15H.O. or other portable outboards
with through-tilt tube steering.
Refer to installation instructions for application limitations.
Go to BOSSWeb for details.
5009573
5009573 Kicker engine steering tie bar kit, Main engine attached to transom no Jack plate 1
5009862 Kicker engine steering tie bar kit, Main engine attached to a vertical lifting jack plate 1
Tie Bars, Steering-Triple or Quad - Off-Set Engine Height

Custom high performance tie bar kits from Latham Marine.
Support triple or quad applications.
Ship with all brackets, installation hardware, custom tie bar and
Latham Marine installation instructions.
All parts are Latham Marine design and supplied. 768918
Warranty is provided by Latham Marine.
768918 Tie Bar Kit, triple engine, 0"-1.5" offset, 26"-29" centerline length 1
768920 Tie Bar Kit, triple engine, 1.5"-3" offset, 27.5"-29" centerline length 1
768921 Tie Bar Kit, triple engine, 1.5"-3" offset, 26"-27.5" centerline length 1
768924 Tie Bar Kit, quad engine, 1.5"-3" offset, 29"-30.5" centerline length 1
Engine Covers Evinrude E-TEC G2

A custom styled and designed cover to protect the engine from
weather and abrasion..
Major Features Include:
Designed exclusively for Evinrude E-TEC G2 outboards
150HP-300HP.
Contoured and sewn to fit the exact shape of the engine
cowling.
A custom fit and easy to install.
Solution dyed water repellent polyester fabric.
Special woven-in soft inner liner wont scratch.
Superior protection for special engine graphics.
Designed for over the road towing.
Key areas reinforced against wear.
Elastic stretch cords plus hook and loop straps keep the cover
tight and secure.
No loose edges to flap in the wind and abrade the finish.
No zippers or drawstrings.
Not designed for engine operation when installed.
Black with Evinrude E-TEC G graphics.
768133

768856 Evinrude E-TEC G2 cover 150 HP - 200 HP 1
768133 Evinrude E-TEC G2 cover 200 H.O. - 300 HP 1
Note: Engine covers are non-returnable for Canadian customers.

Table of Contents
Steering Support Brace,Evinrude E-TEC G2

Use the Evinrude steering support brace to maintain
straight-ahead alignment of the Evinrude E-TEC G2
engine during over the road towing.
Features & Benefits:
Custom designed for Evinrude E-TEC G2 outboards
200HO-300HP.
Installs between the lower motor mount and stern bracket.
Prevents steering movement while towing.
Fits any shaft length.
Lightweight one-piece design.
Tough powder paint coating resists chips and scratches.
Prevents steering movement when towing.
768606

768606 Stering Support Brace 1
Engine Flush Kit,Evinrude E-TEC G2

A front mounted flushing accessory is now available for alternate location for fresh water flushing of the engines
Evinrude E-TEC G2 outboards. Use this kit to provide an cooling system with standard garden hose.
Designed specifically for Evinrude E-TEC G2 outboards, the kit installs conveniently into the Dual Axis rigging center and can be neatly tucked away
and hidden when not IN USE.
Quick connect couplings snap together with ease and eliminate threaded connections that can seize. Integrated check valves assure proper operation.
All parts are included for a complete installation using normal hand tools.
Your customers will appreciate the ease of fresh-water flushing for their Evinrude E-TEC G2 outboard engines.
Features & Benefits:

Easy access, front mounted flushing.
Hides away when not needed.
Port or starboard installation.
Quick connect couplings.
Uses standard garden hose connection.
Easy to install with normal hand tools.
Designed for Evinrude E-TEC G2 outboards.
Convenient engine flushing for Evinrude E-TEC G2
outboards.
5010004

5010004 Evinrude E-TEC G2 Flush Kit 1
Fuel Demand Valve

This valve provides the correct amount of fuel when demanded
by the outboard during start up or operation.
EPA approved portable fuel tanks are required to remain sealed
up to a minimum pressure of 5 psi (34.5 kPa). Use this valve to
ensure that pressurized fuel will not reach the engine or spill out
from the fuel system when the outboard is not in use. 768304
Refer to Service Bulletin 2015-01(P) for complete details.
768304 Fuel Demand Valve 1
Note: DO NOT use this fuel demand valve kit on 90 H.O. - 300 HP Evinrude outboards.
Table of Contents
Oil Tank Kit - Pontoon Series

This kit is designed to fit 40, 50, 60, 60 H.O., 75 and 90 HP
outboards 2010 F suffix and newer models (20 and 25 shaft
length) with a remote oil tank.
Model Year P/N
40, 50, 60 2010 F Suffix -thru 768407
60 H.O., 75, 90 2010 F Suffix -thru 767511
FEATURES:
Automatic refill of outboard-mounted oil tanks
Electrically operated by the low-oil signal in the engine oil tank
1.8 (6.81L) gallons of additional oil capacity
Removing the engine cover is no longer required to refill the
tank
Simple installation
The Evinrude E-TEC pontoon series remote oil tank kit

includes:
1.8 gal (6.81L) oil tank and pump assembly
20 ft. SystemCheck interface wire harness 767511
Battery power harness
All outboard oil tank conversion parts
767511 Remote Oil Tank Kit 1

Evinrude E-TEC G2
E-RIG Rigging Configurator

The recommended rigging selection tool. Evinrude
E-TEC G2
BRP is excited to announce Evinrude E-RIG, Evinrude's newest outboard rigging component selection tool.
E-RIG is a user-friendly web-based tool designed to make selection of Evinrude rigging components efficient and
easy. You can match selection of rigging components specifically to your customers boat application and design.
Digital Shift
E-RIG key features are: & Throttle
No setup, special software or extra cost required
Simple point and click selection based on the engine model and horsepower
Streamlines the building of a line-by-line customized rigging order
Assembles Evinrude rigging packages for single and multiple engines Digital
Gauges &
Pictures of all components MWS
Capability to print an order for review or save into a file for future use
Options to display pricing at cost, suggested retail or no pricing at all
Order placement with a P.O. is point and click direct through E-RIG
Your pricing shown is the same as invoice SystemCheck
Gauges
& MWS
Portable
4-Stroke
For one boat or 20, the new Evinrude E-RIG tool will simplify the process of quickly selecting and ordering the right i-Dock
rigging parts the first time. E-RIG is available now on BOSSWeb. Go to BOSSWeb and navigate to the PARTS section. Joystick
Just click on the E-RIG Rigging Configurator link to launch the application to get started on your first order. System
If you have questions or need assistance with any of the information, please call your BRP Sales Representative.
Evinrude E-TEC G2 Rigging Selection Rigging

Accessories
If using a manual process select rigging for Evinrude E-TEC G2 outboards in the following steps:
1. Select the Evinrude E-TEC G2 ICON TM II shift and throttle rigging kit per application.
2. Select battery cables and propeller hub.
3. Select instruments: ICON TM CTS display, I-Command TM digital, ICON TM Basic, ICON TM Pro or digital to Fuel & Oil
Systems
analog converter.
4. Select accessories.
5. Select steering for multiple engines.
6. Select fuel components.
7. Select propeller. Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index
Enter rigging orders through Evinrude E-RIG on BOSSWeb 3

Evinrude E-TEC G2 Rigging Essentials Evinrude E-TEC G2
Evinrude E-TEC G2 Rigging Essentials

Evinrude
E-TEC G2 Starting with the introduction of the Evinrude E-TEC G2 outboard, Evinrude engineers pushed the
throttle forward with new enhancements for this next generation of digitally controlled outboards.
TOP MOUNT BINNACLES
First is the new styling of the top-mount binnacles, with excellent ergonomics designed to reduce fatigue
Digital Shift and provide smooth, predictable control. Key features of RPM Tune TM and PowerSyncTM enable drivers to
& Throttle
maximize performance and enhance their overall experience.
CONCEALED SIDE MOUNT CONTROL
Second is the concealed side mount control with unrivaled functionality and an accessory foot throttle.
Digital
Gauges & Using the Evinrude ICON TM color display panels, drivers can easily toggle between hand and foot throttle
MWS control. The user benefits of this system are numerous from an automotive-like driving experience, to
the reduced fatigue of keeping both hands on the steering wheel to the smooth and predictable throttle
inputs you would expect from your car or truck.
SystemCheck i-DOCK
Gauges
& MWS All-new for incorporation with the Evinrude E-TEC G2 Rigging Essentials is the Evinrude i-Dock
for multiple engine boats. i-Dock takes advantage of the E-TEC G2s digital throttle and shift control
plus power steering to allow a small joystick to be used for docking or other tight maneuvering. This
easy-to-operate joystick takes the intimidation factor out of performing tight maneuvers and thus can
Portable be a welcome addition for all boaters.
4-Stroke
ICON TM COLOR DISPLAYS
3 sizes of Evinrude ICON TM Touch color instruments offer even more choice and customization enhancing
the on-water experience. These ICON TM displays feature rugged and refined casings, cool, contemporary
i-Dock
Joystick design, easy access, easy-to-read indications and screens with information organized for the customer
System in the way THEY want, without clutter.
INTEGRATED SYSTEMS
Together, the combination of the ICON TM II controls, color instrumentation, foot throttle options and joystick
Rigging control are exceptionally flexible and functional user interfaces that offer the benefits of confidence, control
Accessories and premium feel your customers would expect when operating the most advanced outboard in the world.
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Refer to the following pages for the complete listing of ICON TM II rigging kits, and recommended components for Evinrude E-TEC G2 outboards.
Alphabetical
Index
4 Enter rigging orders through Evinrude E-RIG on BOSSWeb

Evinrude E-TEC G2 Evinrude E-TEC G2 Rigging Selection
Evinrude E-TEC G2 Rigging Selection

Evinrude
Evinrude recommends selection of rigging components based on the number of engines to be installed E-TEC G2
and the type of controls required for that boat.
Find the Evinrude E-TEC G2 rigging selection chart that matches the application. Then follow the
step-by-step process to select the rigging and required accessories.
Digital Shift
& Throttle
Evinrude E-TEC G2 Single Engine Concealed Side Mount Control
Step 1: Select the rigging kit. Main station rigging includes: remote control, key switch plus all required
wires and harnesses for the main station. Digital
Gauges &
Step 2: Select an ignition switch and stop switch configuration to match application requirement. MWS
Step 3: Select battery cable by required length.

Step 4: Select G2 TBX hub kit to install Evinrude stainless steel propellers. SystemCheck
Gauges
Step 5: Select instrumentation. Select color display or DAC for analog gauges. & MWS
Step 6: Select CSM rigging accessories.

Step 7: Select Evinrude propeller. Portable
4-Stroke
Rigging Kit, ICON TM II Premium Concealed Side Mount

768750 - Concealed Side Mount Control Rigging Kit Includes: 766565 Control and 587224 harness, 587174, 20 foot EST backbone
harness, 766592, 15 foot power to battery cable, 764163, 25 foot NMEA backbone harness, 764161, 6 foot extension harness, 767433 i-Dock
power node, 2-764151 tee and 764155 terminator. Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Refer to ICON TM G2 Connection Diagram for recommended layout and connections. Steering
Step 1
768750 Premium Concealed Side Mount Rigging Kit 1 Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Kit, ICONTM II Concealed Side Mount Evinrude E-TEC G2
Rigging Kit, ICON TM II Concealed Side Mount

Evinrude Select STM ICON TM II rigging kit for engine, boat and instrumentation applications targeting basic shift and throttle capability.
E-TEC G2 769011 - Concealed Side Mount Control Rigging Kit Includes: 5009752 control and 587344 harness, 5009792, control handle,
359257, handle cover, 764605, remote control cover, 764606, mounting base kit, 764610, mount hardware kit, 587174, 20 foot EST
backbone harness, 587184, 15 foot power cable to battery, 764163, 25 foot NMEA backbone harness, 764161, 6 foot extension harness,
767433, power node & tee, 2-764151 tee and 764155 terminator.
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable Refer to ICON TM G2 Connection Diagram for recommended layout and connections.
4-Stroke
Step 1
i-Dock 769011 Concealed Side Mount Rigging Kit 1
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
768746 768844
768841
Step 2
Steering P/N Description Pack qty

768746 Switch kit, horizontal, single engine, key off/on/start and EMS 1
768844 Switch kit, square, Single engine, key off/on/start and EMS 1
Propellers
Battery Cables, Evinrude E-TEC G2

Oil & Includes dedicated connection for control head battery power. Crimped and soldered terminals ensure reliability against corrosion.
Engine Step 3
Care
587205 Battery Cable, 10', 4 gauge - Quantity per number of installed engines 1
Reference 587301 Battery Cable, 15', 2 gauge - Quantity per number of installed engines 1
Drawings
& Info 587302 Battery Cable, 20', 2 gauge - Quantity per number of installed engines 1
766596 Adapter "Y" Harness - use with non-factory battery cables for control head battery power 1
Part
Number Propeller Hub System - TBX TM
Index
Step 4
767683 G2 TBXTM bushing kit (POP) - Evinrude E-TEC G2 2015 thru 1
Alphabetical
Index

Evinrude E-TEC G2 CSM Accessory-Foot Throttle, ICONTM G2 Bulkhead Mount
CSM Accessory-Foot Throttle, ICON TM G2 Bulkhead Mount

Fits concealed side mount rigging only Evinrude
Automotive-like ergonomics E-TEC G2
Installs to bulkhead at helm console area
Fore and aft adjustments for different drivers
Foot Pedal to Hand Throttle operation can be switched via
ICON TM Touch Color Gauge displays
Fit to ICON TM II Premium and ICON TM II CSM controls ONLY. Digital Shift
& Throttle
767747
Digital
P/N Description Pack qty Gauges &
MWS
767747 Foot Throttle Bulkhead Mount 1
CSM Accessory-Foot Throttle, ICON TM G2 Floor Mount SystemCheck

Fits concealed side mount rigging only Gauges
Automotive-like ergonomics - Includes foot rest & MWS
Installs to floor at helm console area
Fore and aft adjustments for different drivers
Installs with TH Marine floor mount base - included
Foot Pedal to Hand Throttle operation can be switched via Portable
ICON TM Touch Color Gauge displays 4-Stroke
Fit to ICON TM II Premium and ICON TM II CSM controls ONLY.
766567 i-Dock
Joystick
P/N Description Pack qty System
766567 Foot Throttle Floor Mount 1
CSM Accessory-RPM Tune TM Switch Kit, ICON TM G2 Rigging

Accessories
RPM TuneTM switch allows finger tip adjustment of RPM to fine
tune boat performance. Throttle changes in 1% increments.
Fuel & Oil

Systems
766282
Steering
766282 RPM Tune - Accessory 1
Adapter Kit-Ranger Ignition Module Propellers

Evinrude E-TEC Ranger Touch Pad Adapter Module.
For Ranger boats equipped with the push button key pad.
This kit is required to adapt the Ranger boats touch pad power and ignition system to be compatible with the Evinrude E-TEC
G2 ignition system.
Kit installs inside the drive console area. Oil &
Engine
P/N Description Pack qty Care
5009520 Ignition Module Adapter Kit 1
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Single Engine Binnacle Evinrude E-TEC G2
Evinrude E-TEC G2 Single Engine Binnacle

Evinrude
E-TEC G2 Step 1: Select the main station rigging kit. Main station rigging includes: remote control, key switch plus
all required wires and harnesses for the main station.
Step 2: Select an ignition switch and stop switch configuration to match application requirement.
Digital Shift Step 3: Select battery cable by required length.
& Throttle
Step 4: Select G2 TBX hub kit to install Evinrude stainless steel propellers.
Step 5: Select instrumentation. Select color display or DAC for analog gauges.
Digital Step 6: Select Evinrude propeller.
Gauges &
MWS
Rigging Kit, ICON TM II Premium Single Engine Binnacle Control
768752 - Single Top Mount Binnacle Control Rigging Kit Includes: 766563 Control and 587168 harness, 587175, 25 foot EST
SystemCheck backbone harness, 766592, 15 foot power cable to battery, 587185, 5 foot extension battery power, 764163, 25 foot NMEA backbone
Gauges harness, 764161, 6 foot extension harness, 765132, 2 foot extension harness, 767433 power node & tee, 2-764151 tee and 764155
& MWS terminator.
767983 - Single Top Mount Binnacle Control Rigging Kit Second Station Includes: 766563 Control and 587168 harness, 587180,
15 foot EST backbone harness, 587172, 6 port hub, 766952, 15 foot power to battery cable, 766596 battery power Y cable, 766555
Ignition switch, 764162, 15 foot NMEA extension harness's and 764151 tee.
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Step 1
Fuel & Oil
Systems P/N Description Pack qty
768752 Main Station, Premium Binnacle Control Rigging Kit 1
767983 Second Station, Binnacle Control Rigging Kit 1
Steering
Rigging Kit, ICON TM II Single Engine Binnacle Control
769010 - Single Top Mount Binnacle Control Rigging Kit Includes: 5009776 control and 587345 harness, 5009792, control handle,
587175 25 foot EST backbone harness, 587184, 15 foot power cable to battery, 764163, 25 foot NMEA backbone harness, 764161, 6
foot extension harness, 767433, power node & tee, 2-764151 tee and 764155 terminator.
Propellers Note: Requires additional selection of accessory ignition switch kit. Refer to ignition switch section.
Oil &
Engine
Care
Reference
Drawings
& Info
Part Step 1
Number
Index P/N Description Pack qty
769010 Single Engine, Top Mount Rigging Kit 1
Alphabetical
Index

Evinrude E-TEC G2 Evinrude E-TEC G2 Ignition Switches-Single Engine

Evinrude
E-TEC G2
Digital Shift
& Throttle
768746 768844
768841
Digital
Step 2 Gauges &
MWS
768746 Switch kit, horizontal, single engine, key off/on/start and EMS 1 SystemCheck
Gauges
768844 Switch kit, square, Single engine, key off/on/start and EMS 1 & MWS
Battery Cables, Evinrude E-TEC G2 Portable

Includes dedicated connection for control head battery power. Crimped and soldered terminals ensure reliability against corrosion. 4-Stroke
Step 3
587205 Battery Cable, 10', 4 gauge - Quantity per number of installed engines 1 i-Dock
Joystick
587301 Battery Cable, 15', 2 gauge - Quantity per number of installed engines 1 System
Rigging
Accessories
Propeller Hub System - TBX TM
Step 4
Fuel & Oil
767683 G2 TBXTM bushing kit (POP) - Evinrude E-TEC G2 2015 thru 1 Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Dual Engine Binnacle Evinrude E-TEC G2
Evinrude E-TEC G2 Dual Engine Binnacle

Evinrude
Digital Shift Step 3: Select battery cable by required length and number of engines.
& Throttle
Step 5: Select instrumentation. Select color display or DAC for analog gauges.
Digital Step 6: Select steering tie bars based on engine center line dimensions.
Gauges &
MWS
Step 7: Select Evinrude propeller.
Rigging Kits, ICON TM G2 Dual Engine Binnacle Control

SystemCheck
Gauges 768754 - Dual Engine Top Mount Binnacle Control Rigging Kit, Single Station Includes: 766564 Control and 587225 harness,
& MWS 587180, 15 foot EST backbone harness, 587175, 25 foot EST backbone harness, 587172, 6 port hub, 766592, 15 foot power cable to
battery, 587185, 5 foot extension battery power, 764163, 25 foot NMEA backbone harness, 2 of 764162, 15 foot extension harness,
765132, 2 foot extension harness, 767433 power node & tee, 3-764151 tee, and 764155 terminator.
767985 - Dual Engine Top Mount Binnacle Control Rigging Kit, Second Station Includes: Control and harness, 587170, 15 foot
Portable EST backbone harness, 766592, 15 foot battery power cable, 766558 engine start stop panel, 764162, 15 foot NMEA backbone harness,
4-Stroke
587172, 6-port hub, 764151 Tee and 766596 battery adapter harness.
i-Dock
Joystick
System
Rigging
Accessories

Fuel & Oil
Systems
Step 1
768754 Dual Engine, Binnacle Control Rigging Kit, single station 1
Steering 767985 Dual Engine, Binnacle Control Rigging Kit, second station 1
Evinrude E-TEC G2 Ignition Switches-Dual Engine

Propellers
Oil &
Engine
Care
768748
768846
Reference 768866
Drawings
& Info Step 2
768846 Switch kit, vertical, 2 eng., Key off/on, EMS and Rocker panel 1
Part
Number 768748 Switch kit, horizontal, 2 eng, Key off/on, EMS and rocker panel 1
Index
768866 Switch kit, square, 2 eng., Key off/on, EMS and Rocker panel 1
Alphabetical
Index

Evinrude E-TEC G2 Battery Cables, Evinrude E-TEC G2

Includes dedicated connection for control head battery power. Crimped and soldered terminals ensure reliability against corrosion. Evinrude
Step 3 E-TEC G2

587301 Battery Cable, 15', 2 gauge - Quantity per number of installed engines 1 Digital Shift
& Throttle
Digital
Propeller Hub System - TBX TM Gauges &
MWS
Step 4
767683 G2 TBXTM bushing kit (POP) - Evinrude E-TEC G2 2015 thru 1 SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Triple Engine Binnacle Evinrude E-TEC G2
Evinrude E-TEC G2 Triple Engine Binnacle

Evinrude
& Throttle
Step 5: Select instrumentation.
Digital Step 6: Select steering tie bars.
Gauges &
MWS
Rigging Kits, ICON TM G2 Triple Engine Binnacle Control

SystemCheck
Gauges 768756 - Triple Engine Top Mount Binnacle Control Rigging Kit, Single Station Includes: 766564 Control and 587227 harness,
& MWS 587175, 25 foot EST backbone harness, 766592, 15 foot power cable to battery, 587185, 5 foot battery power extension , 766559
triple engine start panel, 766583 triple engine trim panel, 2-587187 ignition & trim module extension, 587172, 6 port hub, 3-587180
engine cables, 764163, 25 foot NMEA backbone harness, 3-764162, 15 foot extension harness, 765132, 2 foot extension harness,
767433 power node & tee, 4-764151 Tee, and 764155 terminator.
Portable 767987 - Triple Engine Top Mount Binnacle Control Rigging Kit, Second Station Includes: Control and harness, 587181, 20 foot
4-Stroke
EST backbone harness, 766592, 15 foot battery power cable, 766596 battery power adapter, 766559 Engine start panel, 766583 engine
trim panel, 766560 second station stop lanyard and switch, 764162, NMEA 2000 backbone harness, 587172, 6-port hub and 765151 tee.
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil Refer to ICON TM G2 Connection Diagram for recommended layout and connections.
Systems
Step 1
768756 Triple Engine, Binnacle Control Rigging Kit, single station 1
Steering
767987 Triple Engine, Binnacle Control Rigging Kit, dual station 1

Propellers
Oil &
Engine
Care
768747 768845
768842
Reference
Drawings Step 2
& Info
Part 768747 Switch kit, horizontal, 3-4 eng., Key off/on and EMS 1
Number
Index 768845 Switch kit, square, 3-4 eng., key off/on and EMS lanyard 1
Alphabetical
Index


Step 3 E-TEC G2

& Throttle
Digital
MWS
Step 4
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Four Engine Binnacle Evinrude E-TEC G2
Evinrude E-TEC G2 Four Engine Binnacle

Evinrude
& Throttle
Step 5: Select instrumentation.
Digital Step 6: Select steering tie bars.
Gauges &
MWS
Rigging Kits, ICON TM G2 Four Engine Binnacle Control

SystemCheck
Gauges 768758 - Four Engine Top Mount Binnacle Control Rigging Kit, Single Station Includes: 766564 Control and 766588 harness,
& MWS 587175, 25 foot EST backbone harness, 766592, 15 foot power cable to battery, 587185, 5 foot battery power extension , 766561 quad
engine start panel, 2-587187 ignition & trim module extension , 766584 quad engine trim panel, 587172, 6 port hub, 4-587180 engine
cables, 765132, 2 foot NMEA extension, 764163, 25 foot NMEA backbone harness, 4-764162, 15 foot extension harness, 767433 power
node & tee, 5-764151 Tee and 764155 terminator.
Portable 767989 - Four Engine Top Mount Binnacle Control Rigging Kit, Second Station Includes: Control and harness, 587181, 20 foot
4-Stroke
EST backbone harness 766592, 15 foot battery power cable, 766596 battery power adapter, 766561 engine start panel, 766584
engine trim panel, 766560 second station stop lanyard and switch, 764162, 15 foot NMEA 2000 backbone harness, 587172, 6-port
hub and 764151 tee.
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems Refer to ICON TM G2 Connection Diagram for recommended layout and connections.
Step 1
Steering
768758 Four Engine, Binnacle Control Rigging Kit, single station 1
767989 Four Engine, Binnacle Control Rigging Kit, second station 1
Propellers
Oil &
Engine
Care
768747 768845
Reference 768842
Drawings
& Info Step 2
Part
Number 768747 Switch kit, horizontal, 3-4 eng., Key off/on and EMS 1
Index
768845 Switch kit, square, 3-4 eng., key off/on and EMS lanyard 1
Alphabetical
Index


Step 3 E-TEC G2

& Throttle
Digital
MWS
Step 4
Gauges
& MWS
Trim Plates, ICON TM
Used to cover cutout hole of BRP mechanical shift binnacle
controls.
Portable
4-Stroke
i-Dock
Joystick
System
P/N Description Pack qty Rigging

Accessories
765075 Trim Plate, single binnacle to ICONTM single, white 1
765076 Trim Plate, single binnacle to ICONTM single, off white 1

Fuel & Oil
765078 Trim Plate, single binnacle to ICONTM single, off white 1 Systems
765079 Trim Plate, dual binnacle to ICONTM dual, white 1
765080 Trim Plate, dual binnacle to ICONTM dual, off white 1
Steering
Accessory - Power Y Harness
Recommended stocking essential.
Use to daisy chain key switch power and ground connection
to accessory devices.
Typical use supports trim tab auto retract and additional power
Propellers
for gauges.
587230
Oil &
P/N Description Pack qty Engine
Care
587230 Accessory Power Y Harness 1
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Universal Repower Rigging System, ICON TM Evinrude E-TEC G2
Universal Repower Rigging System, ICON TM

Evinrude The Universal Repower Rigging System is a boat mounted
E-TEC G2 device used to convert push/pull mechanical control cable
movement into digital shift and throttle operation.
Product features and benefits are:
Use for lowest cost repower.
Allows use of existing SystemCheck mechanical controls,
Digital Shift Snap-In control cables and SystemCheck wiring.
& Throttle
Compatible with Evinrude Surface Side Mount control,
Concealed Side Mount control, Single Binnacle control and
Single Binnacle control with key.
Digital Also compatible with aftermarket controls and SAE type

Gauges & control cables and adapters.
MWS
Does not allow networking of multiple engines and
instruments.
Integrated support for analog gauges or digital gauges.
Recommended for single engines only (150-300 hp).
SystemCheck
Gauges Kit includes converter box and electronic module, wire
& MWS harness (766596), 15 feet power supply cable (766592), 15
feet network backbones (587173, 764161, 764162), tees
(764151), power node (767433), terminator kit (764155) and
installation hardware.
Portable Mechanical controls, control cables, SystemCheck wires,
4-Stroke
key switch and instruments are purchased separately if
required
i-Dock
767682 Universal Repower Rigging System 1
Joystick
System
Note: Does not provide capability for mode control of trim assist, power steering and hand to foot throttle transfer.
Evinrude E-TEC G2 Analog Repower

Rigging
Accessories Rigging Compatibility - Existing Engine(s) 200+HP: Reference only: please use Evinrude E-Rig to place
orders.
Evinrude/Johnson
RIGGING COMPONENT Evinrude/Johnson Yamaha 2 or Mercury 2 or Suzuki Honda
1996-Newer: 2
COMPATIBILITY 1995 Older 4-Stroke 4-Stroke 4-Stroke 4-Stroke
or 4-Stroke
Fuel & Oil
Systems Mechanical to Digital
Converter(MCM)
1-767682 1-767682 1-767682 1-767682 1-767682 1-767682
Required for Analog
Rigging
Use Existing Control

Yes Yes Yes Yes Yes Yes
Steering Box
Requires
Requires Requires Requires
Use Existing Control SAE/Universal
Yes Yes cable adapter cable adapter cable adapter
cables Cables
1-778563 1-778563 1-778563
2-776824
Propellers Requires Requires Requires Requires Requires

Use Existing Wire SystemCheck SystemCheck SystemCheck SystemCheck SystemCheck
Yes
Harness wire harness wire harness wire harness wire harness wire harness
1-176341 1-176341 1-176341 1-176341 1-176341
Requires Requires Requires Requires Requires

Oil & Use Existing Ignition SystemCheck SystemCheck SystemCheck SystemCheck SystemCheck
Yes
Engine Switch key switch key switch key switch key switch key switch
Care 1-176408 1-176408 1-176408 1-176408 1-176408
GAUGE COMPATIBILITY
2-Stroke: Analog Reuse boat Reuse boat

Reference Reuse boat
Instruments - gaugesexcept gaugesexcept
Drawings gauges;Requires Reuseboatgauges N/A N/A
(Yamaha,Mercury, tach;andtrim tach;andtrim
& Info SystemCheckgauge
Evinrude/Johnson) gauge gauge
4-Stroke: Analog Reuse boat

Reuse boat Reuse boat Reuse boat
instruments - Reuseboatgauges gauges
gaugesexcept gaugesexcept gaugesexcept
(Yamaha,Mercury, N/A excepttach;and excepttach;
Part tach;andtrim tach;andtrim tach;andtrim
Honda,Suzukior trimgauge andtrim
Number gauge gauge gauge
Evinrude/Johnson) gauge
Index
Command Link
Yamaha Command
N/A N/A not applicable; N/A N/A N/A
link Gauges
and trim gauge
Alphabetical Note: Single and Twin applications only.

Index

Evinrude E-TEC G2 ICONTM Touch 7.0 Color Touch Screen (CTS)

ICON TM Touch 7.0 CTS features , f u l l - c o l o r 7 - i n c h t o u c h s c r e e n . Evinrude
D e s i g n e d f o r E v i n r u d e E - T E C G2. E-TEC G2

1, 2, 3 or 4 engine support.
Mode control for adjustments to power steering, trim assist and for Digital Shift
concealed side mount, switching between hand and foot throttle & Throttle
operation.
Water tank levels up to 3 tanks / 3 water types.
temperatures of sea water, live well and bait well. Digital
Multi-language English, French, Italian, German, Spanish. Gauges &
Descriptive text for fault codes and procedures. MWS
Predefined, six screen groupings:

RPM, trim level, engine water temperature, fuel economy MPG, fuel SystemCheck
consumption GPH with and boat speed. Gauges
Engine page - in-depth monitoring of one or up to 4 engines. & MWS
fuel economy.
Trip Logs page - regarding trip distance, fuel economy, average speed
and more. Portable
Eco View page - allows the user to optimize engine throttle and trim 4-Stroke
A status bar is always visible with gear position, GPS clock, active throttle,
and fault notifications.
Surface mount dimensions - 10 / 25.4cm wide x 6 / 15.24cm tall. i-Dock
Includes drill template, mounting hardware and GPS antenna. Joystick
System
766284 ICON TM Touch 7.0 CTS - single, twin, triple or quad engines 1
768459 Replacement Bezel, ICONTM Touch 7.0 CTS 1 Rigging

Accessories

Fuel & Oil
ICON TM Touch 4.3 CTS features, f u l l - c o l o r 4 . 3 - i n c h t o u c h s c r e e n . Systems

1 or 2 engine support.
Mode control for adjustments to power steering, trim assist and for Steering
operation.
Water tank levels up to 1 tank / 1 water type.
temperatures of sea water, live well and bait well. Propellers
Predefined, 6 screen groupings:

RPM, trim level, engine water pressure, fuel economy MPG, fuel Oil &
consumption GPH and boat speed. Engine
Engine page - in-depth monitoring of one or up to 2 engines. Care
fuel economy. Reference
Trip Logs page - trip distance, fuel economy, average speed and more. Drawings
Eco View page - allows the user to optimize engine throttle and trim & Info
The status bar is always visible with gear position, GPS clock, active
throttle, and fault notifications.
Surface mount dimensions - 7.5/ 19.05cm wide x4/ 10.16cm tall. Part
Includes drill template, mounting hardware and GPS antenna. Number
Index
766285 ICON TM Touch 4.5 CTS - single or twin engines 1
768458 Replacement Bezel, ICONTM Touch 4.3 CTS 1 Alphabetical

Index

ICONTM 3.5 Color Screen-Single Engine Evinrude E-TEC G2
ICON TM 3.5 Color Screen-Single Engine

Evinrude ICON TM 3.5 CS features a full-color 3.5-inch screen. Designed
E-TEC G2 for Evinrude E-TEC G2.
Color Screen - Easy to access information.
1 engine support.
Digital Shift concealed side mount, switching between hand and foot throttle
& Throttle operation.
Accessory display of engine water pressure.
Digital Notification of faults and recovery actions.
Gauges &
MWS Predefined, intuitive and uncluttered design arranges engine and boat
systems information via 5 screen groupings:
Home page - with two modes: one for general cruising information and
another for just basic information such as RPM, trim level, engine water
pressure and boat speed.
SystemCheck Engine page - in-depth monitoring of one Evinrude E-TEC G2
Gauges outboard.
& MWS Fuel/Fluids page - precise readouts of fuel levels up to 2 tanks and
engine oil levels.
Vessel page - accurate readouts on battery voltage, boat speed, and
fuel economy.
Trip Logs page - offers detailed information regarding trip distance, fuel
economy, average speed and more.
Portable
Eco View page - fuel management information allows the user to optimize
4-Stroke
engine throttle and trim adjustment for instant changes and the most
efficient operation.
Surface mount dimensions - 4/ 10.16cm wide x 4/ 10.16cm tall.
i-Dock Fits standard 3 3/8 round hole.
Joystick
System

767750 ICONTM Touch 3.5 C Single Engine 1
Rigging
Accessories 768151 ICONTM Touch 3.5 C Single Engine with GPS antenna 1
768401 Sun Cover, ICONTM Touch 3.5 Color 1
Fuel & Oil

Gauge Converter Kit, ICON TM G2
Systems Used to convert Evinrude E-TEC G2 digital engine data to
analog SystemCheck data.
Allows use of standard analog or SystemCheck Tachometers
or SystemCheck gauge with Evinrude E-TEC G2.
Converts digital engine data RPM, trim, low oil, no oil,
overheat and check engine warnings into analog signals.
Steering
Suggested use is repower applications to reduce cost by reuse
of existing analog gauge installations.
Propellers
766287
Oil & P/N Description Pack qty
Engine
Care 766287 Converter single engine 1
766611 Wire harness - dual engines 1
Note: Does not provide capability for mode control of trim assist, power steering and hand to foot throttle transfer.
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 ICONTM Gauges, Pro Series
ICON TM Gauges, Pro Series

ICON TM PRO offers digital performance wrapped in an analog Evinrude
look with increased functionality in an LCD window. E-TEC G2
Specialized functions include GPS speed, fuel management,
fuel economy, trip logs and many more.
Its plug and play. Connects directly into the existing Evinrude
NMEA 2000 network.
Works on Evinrude E-TEC 40-hp through 300-hp. Digital Shift
Supports up to 4 engines. & Throttle
Supports up to 4 fuel tanks.
Accessory gauges provide dedicated display of water pressure,
fuel level, battery volts, engine trim, engine temperature and
oil tank level.
Multi-language support. Digital
Gauges &
Engine fault warning lights. MWS
Fog resistant lens.
Fault code support for Evinrude E-TEC G2.
Support for Evinrude E-TEC G2 mode control of DPS and
i-Trim. Chrome Bezel, White Dial Face or Black Dial Face SystemCheck
Does not support Evinrude E-TEC G2 foot throttle transfer. Gauges
& MWS
ICON TM Gauges, Pro 3.5 Diameter
ICON TM PRO offers digital performance wrapped in an analog
look with increased functionality in an LCD window.
Portable
Black P/N White P/N Description Pack qty 4-Stroke
768007 768008 3" (89mm), ICON Pro LCD 7000 RPM Tachometer Kit, Chrome 1
768053 768054 3" (89mm), ICON Pro LCD 50 MPH Speedometer Kit, Chrome 1
i-Dock
Joystick
System
ICON TM Gauges, Basic 3-n-1, 5 Diameter

ICON TM Multi-function 3-n-1 gauges offer high visibility and
compact installation. Two gauges offer 7 major functions - single
engine applications. Rigging
Accessories
Single engine application
Single fuel tank support
Tachometer support of RPM, Engine Temperature and Engine
Trim
Speedometer support of MPH, Fuel Level and Voltage
Fuel & Oil
Engine fault warning lights - low oil, no oil, overheat and check
Systems
engine
Steering
Black P/N White P/N Description Pack qty

766160 766183 5" (127mm), 3-in-1, ICON Basic Tachometer, Engine Temperature & Trim Kit 1
766166 766189 5" (127mm), 3-in-1, ICON Basic Speedometer Kit, 80 Mph with Fuel & Volt 1
Propellers
ICON TM Gauges, Basic Series

ICON TM Basic offers digital performance with an analog look.
Basic functions in a high value, lower cost package Oil &
User Friendly - no push buttons to push, no setup required. Engine
Just straight accurate engine information. Care
NMEA 2000 network
Easy plug and play daisy chain connections between the
tachometer and accessory gauges simplify wiring. Reference
Works on Evinrude E-TEC 40-hp through 300-hp. Drawings
& Info
Supports up to 2 engines
Supports up to 2 fuel tanks
oil tank level. Part
Engine fault warning lights low oil, no oil, overheat, check Chrome Bezel, White Dial Face or Black Dial Face Number
Index
engine
Fog resistant lens
Alphabetical
Index

ICONTM Gauges, Basic 3.5 Diameter Evinrude E-TEC G2
ICON TM Gauges, Basic 3.5 Diameter

Evinrude ICON TM Basic offers digital performance with an analog look.
E-TEC G2
766159 766182 3" (89mm), ICON Basic Tachometer with System Check Kit 1
766163 766186 3" (89mm), ICON Basic Speedometer Kit, 30 Mph 1

Digital Shift
& Throttle 766164 766187 3" (89mm), ICON Basic Speedometer Kit, 50 Mph 1
766165 766188 3" (89mm), ICON Basic Speedometer, 80 Mph 1
Digital ICON TM Gauges, Accessory, 2 Diameter

Gauges &
MWS ICON TM Accessory Gauges are the perfect complement to
the ICON TM Pro, ICON TM Basic 3-n-1 and ICON T M Basic Main
Gauges.
SystemCheck
Gauges
& MWS
Portable From adding a single fuel gauge to trying to simulate a fighter

4-Stroke jet cockpit, EvinrudeICON TM accessory gauges complete your
console. These 2.0 in. (51 mm) gauges are available with a black
or white dial face.
i-Dock
Joystick 766173 766196 ICON Basic Trim gauge kit, 2" (50.8mm) - includes 12" harness 1
System
766174 766197 ICON Basic Oil Level gauge kit, 2" (50.8mm) Single Engine - includes 12" harness 1
766905 766906 ICON Basic Oil Level gauge kit, 2" (50.8mm) Dual Engine 1
Rigging 766175 766198 ICON Basic Water Temperature gauge kit, 2" (50.8mm) - includes 12" harness 1
Accessories
766176 766199 ICON Basic Fuel Level gauge kit - Tank 1, 2" (50.8mm) - includes 12" harness 1
Fuel & Oil
Systems 766179 766202 ICON Basic Voltmeter gauge kit - Battery 1, 2" (50.8mm) - includes 12" harness 1
766180 766203 ICON Basic Voltmeter gauge kit - Battery 2, 2" (50.8mm) - includes 12" harness 1
766171 766194 ICON Basic 30 PSI Water Pressure gauge kit, 2" (50.8mm) - requires water ppressure sensor 1
Steering
ICON TM Gauge, Additional Accessories

Propellers P/N Description Pack qty
766114 ICON Basic backlight adjustment kit (optional with ICON Basic gauge to provide backlight dimming) 1
767488 GPS Antenna - SOG input (NMEA 200 compatible) 1

Oil & 1
764193 Paddle Wheel Kit - SOW input (NMEA 200 compatible)
Engine
Care 764671 Paddle Wheel Tri-Ducer, Transom Mount, Speed, Depth, Temperature (NMEA 200 compatible) 1
764673 Paddle Wheel Tri-Ducer, Thru Hull, Plastic, Speed, Depth, Temperature (NMEA 200 compatible) 1
764672 Transducer, Transom Mount - Depth/Temp Only (NMEA 200 compatible) 1

Reference
Drawings
765513 Jumper Harness, Gauge to Gauge, 16" - use for longer distances from main harness 1
& Info
Part
Number 766105 Studded Back Clamp for 2" Gauge - service replacement part 1
Index
766106 Studded Back Clamp for 3.5" Gauge - service replacement part 1
766107 Studded Back Clamp for 5" Gauge - service replacement part 1
Alphabetical
Index

Evinrude E-TEC G2 Harness, Extension Network BUSS Cable,
Harness, Extension Network BUSS Cable,

I-CommandTM and ICON TM Gauge . Evinrude
Used to extend the harness between the engine and the helm of E-TEC G2
the vessel, or as an extension to a NMEA 2000 device harness.
Required to extend gauge network cables from main station
to second station application.
Digital Shift
& Throttle
764163
P/N Length Description
765132 2' Network bus Cable, 2' Digital
Gauges &
764161 6' Network bus Cable, 6' MWS
764162 15' Network bus Cable, 15'

SystemCheck
Gauges
& MWS
GPS Module & Tee, I-Command TM and ICON TM Gauge
Required to view GPS speed over ground (SOG), longitude and
latitude, time, and to support fuel management functions.
Includes one network tree
Portable
4-Stroke
i-Dock
Joystick
767488 System

767488 16" GPS Antenna - SOG input (NMEA 200 compatible) Rigging
Accessories
Tri-Ducer Kit, Paddle Wheel - Transom Mount, I-Command TM & ICON TM Gauge
Measures SOW (speed over water), depth and, water
temperature.
Includes a 12 foot lead and one network tee. Fuel & Oil
Systems
764671 Steering

764671 Paddle Wheel Tri-Ducer, Transom Mount, Speed, Depth, Temperature (NMEA 200 compatible) 1

Propellers
Tri-Ducer Kit, Paddle Wheel - Thru Hull, I-Command TM & ICON TM Gauge
Plastic thru-hull tri-ducer measures SOW (speed over water),
depth and, water temperature. Oil &
Includes a 12 foot lead and one network tee. Engine
Care
Reference
764673 Drawings
& Info
Part
Number
Index
Alphabetical
Index

Speed Kit, Paddle Wheel I-Command TM & ICONTM Gauge Evinrude E-TEC G2
Speed Kit, Paddle Wheel I-Command TM & ICON TM Gauge

Evinrude Measures speed over water only.
E-TEC G2
Digital Shift
& Throttle
765150
Digital
Gauges & P/N Description Pack qty
MWS
765150 Transducer, Speed Only, Transom Mount 1
SystemCheck
Temperature Kit, I-Command TM & ICON TM Gauge
Gauges Measures fluid, air or mechanical temperatures.
& MWS Includes a 12' lead and one network tee.
Portable
4-Stroke
i-Dock 764183
Joystick
System P/N Description Pack qty
764183 Temperature Kit 1
Rigging Tees, Network - Single I-Command TM & ICON TM Gauge

Accessories
Used for adding NMEA 2000 devices to the network.
Single network tees are included with all kits
Order individual tees for adding devices not sold in kits or for
service replacement of an existing network tee 764151
Fuel & Oil
Systems P/N Description Application
764151 Tee - Single Tee - Single
766027 Tee - Bulk pack 10 pcs Tee - Bulk pack 10 pcs
Steering
Water Pressure Sensor Kit, Evinrude E-TEC G2
Required to view water pressure on ICON TM Touch gauges,
ICON TM gauges or I-Command TM gauges.
I-Command TM water pressure sensor works with all Evinrude
E-TEC outboards supporting I-Command TM and ICON TM
Propellers gauges.
Includes engine mounted sensor and wire harness.
Water pressure information transmitted via engine EMM. 5008640

Engine
Care 5008640 Block Mounted Water Pressure Sensor Kit, one per engine (0-60 PSI maximum pressure range) - 115-300 HP 2012 thru 1
Battery Charging Kit - Evinrude E-TEC G2

Reference 200-300 HP - Allows charging of one additional battery per
Drawings
engine. Provides isolated charging of auxiliary battery.
& Info
16 foot / 4.8 m long.
Connect between the engine and the auxiliary battery.
5009079
Part
Number
Index P/N Engine Year
5009079 Auxiliary Battery Charging Kit (16')
Note: Evinrude E-TEC G2 only

Alphabetical
Index

Evinrude E-TEC G2 Connectors - Trim Y
Connectors - Trim Y
To provide electrical connections to tap into the trim harness Evinrude
wit h asecond trim switch (i.e. bow mounted trim). E-TEC G2
176588
P/N Description Pack qty Digital Shift

& Throttle
176534 "Y" Connector Only - 6" 1
176588 "Y" Connector with 13' Cable no Switch 1
Digital
Oil Tank Kit - Remote, Evinrude E-TEC G2 150-300 hp Gauges &
MWS
Use to add extra oil capacity and extend engine cruising range
between oil fills.
Automatic operation by engine with trigger of low oil warning. Oil
tank includes custom oil pump to auto-replenish engine oil tank.
Standard size 1.8 gallon includes 15 length hose and mounting SystemCheck
Gauges
hardware. & MWS
Standard size 3.0 gallon oil tank includes 30 length hose and
mounting hardware.
Select accessory oil level sender to monitor remote tank oil level
Portable
4-Stroke
5008571
i-Dock
5008571 Remote Oil Tank, 1.8 Gallon 1 Joystick
System
5008572 Remote Oil Tank, 3.0 Gallon 1
Oil Level Converter Kits with Sender

Used to add oil level sender capability to 1.8 and 3.0 gallon oil Rigging
tank. Accessories

Allows display of remote oil tank level into ICON TM Touch color
displays.
Oil level converter kits include the converter cable, an oil level
sensor and network tees. Fuel & Oil
Requires installation to the oil tank. Systems
764271
764271 Oil Level Converter Kit - Single Engine (1.8 gallons) 1 Steering
764273 Oil Level Converter Kit - Dual Engine (1.8 gallons) 1
764272 Oil Level Converter Kit - Single Engine (3.0 gallons) 1

Propellers
Oil Pump Assembly-Remote, Evinrude E-TEC G2 150-300 hp

Installed into a boat mounted oil tank to provide extra oil capacity
and extend the boat cruising range between oil fills.
Automatically replenishes engine oil tank from a boat mounted oil Oil &
tank with activation of the low oil warning - no user input required. Engine
Care
Two sizes of oil pump kits are available based on oil tank depth.
767686 maximum tank depth of: 7.0 inches (17.78 cm)
768241 maximum tank depth of: 9.0 inches (22.86 cm)
Recommended for 10 gallon oil tank P/N 776580 - or other Reference
custom made oil tanks with maximum depth of 9. Drawings
& Info
Can also be added to 5008572, 3.0 gallon remote oil tank to
support dual engines with only one boat mounted tank.
Select quantity one per engine.
Part
767686 Number
Index
767686 1.8 Gallon Remote Oil Tank Pump Assembly with 15' hose 1
768241 3.0 Gallon Remote Oil Tank Pump Assembly with 30'hose (for 10 gallon oil tank) 1
Alphabetical
Index

Oil Tank Assembly - 10 Gallon Evinrude E-TEC G2
Oil Tank Assembly - 10 Gallon

Evinrude For twin and triple engine installations, direct injection or carbureted. Uses Evinrude/Johnson oil pick up assembly p/n 5008614 - one pickup assembly
E-TEC G2 per engine. Installer will be required to drill a third hole for third engine oil pickup.
11.25Hx30.75Lx9W
Two holes drilled for twin pickups
Oil level sender
Digital Shift Molded fitting for fill and vent hose
& Throttle Select additional oil level converter kit, I-Command TM
oil level signal converter kit, single tank.
776580
Warranty to be provided by Rabud TM .
Digital
Gauges &
MWS P/N Description Pack qty
776580 10 Gallon Tank Assembly 1
SystemCheck Oil Level Converter Kits

Gauges
& MWS Allows display of remote oil tank level into ICON TM Touch color
displays.
Converts analog sending unit to digital signal.
Portable
4-Stroke
i-Dock
Joystick
System

763737 Oil Level Converter Kit - 10 Gallon Tank 1
Rigging
Accessories
Oil Fill Kit, Remote
Mounts on deck for remote filling of oil injection tank.
Fuel & Oil
Includes tank cap and vented deck fitting
Systems
Steering
176461

Propellers
176461 Remote Oil Fill Kit 1
766907 25' Oil Fill Hose to Connect Kit and Tank (not for gasoline) - 11/2" I.D. 1
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Steering Tie Bars, Installation
Steering Tie Bars, Installation

Number of Outboards Kits Required Evinrude
E-TEC G2
2 (1 of 766568) or (1 of 766569)
3 (1 of 766568) + (1 of 766608)
or
(1 of 766569) + (1 of 766609)
Digital Shift
4 & Throttle
(1 of 766568) + (2 of 766608)
or
(1 of 766569) + (2 of 766609)
When installing three or four engines, the center outboard(s) should be mounted no more than one mounting hole location lower or higher to prevent
the tie bars from binding at all tilt or turn angles. For Center engines that require an offset greater than one mounting hole, refer to the custom Digital
tie bar kits from Latham Marine. Gauges &
MWS
1. Center engine mounted using 2nd hole.
2. Port & starboard engines mounted using 3rd hole.
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
IMPORTANT: After the outboards have been installed, verify clearance at all tilt and steering angles.
Propellers
Tie Bars, Steering-Twin Engines, Evinrude E-TEC150-300 hp Engines
Steering tie bar, Dual engine
Includes all mounting hardware
Refer to application table 766568 Oil &
Engine
766568 Steering Tie Bars 27"-29" centerline length (dual engine) 1
766569 Steering Tie Bars 28.7"-35.9" centerline length (dual engine) 1

Reference
Drawings
Tie Bars, Steering-Triple or Quad Engines & Info
Steering tie bar, triple or quad engine

Requires additional purchase of 766568 dual engine tie bar
Includes all mounting hardware 766608
Part
Refer to application table Number
Index
766608 Steering Tie Bars 24.2"-29.1" centerline length (triple or quad engine) 1
766609 Steering Tie Bars 28.7"-35.9" centerline length (triple or quad engine) 1
Alphabetical
Index

Tie Bars, Steering-Triple or Quad - Off-Set Engine Height Evinrude E-TEC G2
Tie Bars, Steering-Triple or Quad - Off-Set Engine Height

Evinrude Custom high performance tie bar kits from Latham Marine.
E-TEC G2 Support triple or quad applications.
Ship with all brackets, installation hardware, custom tie bar and
Latham Marine installation instructions.
All parts are Latham Marine design and supplied. 768918
Warranty is provided by Latham Marine.
Digital Shift
& Throttle P/N Description Pack qty
Digital 768920 Tie Bar Kit, triple engine, 1.5"-3" offset, 27.5"-29" centerline length 1
Gauges &
MWS 768921 Tie Bar Kit, triple engine, 1.5"-3" offset, 26"-27.5" centerline length 1
SystemCheck
Gauges 768924 Tie Bar Kit, quad engine, 1.5"-3" offset, 29"-30.5" centerline length 1
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Tie Bars, Hydraulic, Evinrude E-TEC G2 Engine
Tie Bars, Hydraulic, Evinrude E-TEC G2 Engine

Use this kit on dual outboard Evinrude E-TEC G2 74 V6 (3.4L) applications exceeding 36 center line. Evinrude
Select the hydraulic tie bar kit. E-TEC G2
Select hydraulic hose by length between the engine and the alignment valve. Use only BRP hose with 3000 PSI rating.
Select hydraulic hose by length between the alignment valve and the helm. Use only SeaStar or equivalent hose with 1000 PSI rating.
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Ref P/N Name of Part Qty
5009622 Hydraulic Tie Bar Kit 1
1 356520 Rigging Coupler 1
2 357542 Screw Plug 1 Steering
3 358283 O-Ring 1
4 357893 Steering Hose Anti-Kink Retainer 2
5 358193 Elbow 4
Propellers
6 5009621 Alignment Valve 1
7 358192 T-Fitting 2
WARNING Oil &

Engine
When installing this system one outboard MUST have Dynamic Power Steering (DPS), and the second outboard MUST be a non-DPS Care
(manual hydraulic steering).
Use of two DPS outboards in this system will result in loss of steering synchronization and unexpected loss of boat control.
Reference
P/N Description Pack qty Drawings
& Info
5009622 Hydraulic Tie Bar kit 1
Part
Number
Index
Alphabetical
Index

Hose Kits, Hydraulic, Evinrude E-TEC G2 Engine Evinrude E-TEC G2
Hose Kits, Hydraulic, Evinrude E-TEC G2 Engine

Evinrude Hoses labeled 1 are rated 3000 PSI minimum and must be s u p p l i e d b y B R P . U s e t h e t a b l e b e l o w t o s e l e c t t h e r e q u i r e d h o s e k i t s .
E-TEC G2 H o s e s l a b e l e d 2 c a n b e a n y h o s e a p p r o v e d b y t h e h e l m m a n u f a c t u r e r .
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Important
Steering Use the BRP hydraulic hose kits listed below. Two hose kits are required per installation. These hoses have a pressure rating
of 3000 psi. DO NOT use any other hoses.
768204 Hydraulic Hose Kit - 4'(1.22 M) 1
Propellers 768206 Hydraulic Hose Kit - 6'(1.82 M) 1
768208 Hydraulic Hose Kit - 8' (2.44 M) 1
Oil & 768212 Hydraulic Hose Kit - 12' (3.66 M) 1

Engine
Care 768214 Hydraulic Hose Kit - 14' (4.26 M) 1
768216 Hydraulic Hose Kit - 16'(4.88 M) 1

Reference
Drawings 768220 Hydraulic Hose Kit - 20' (6.10 M) 1
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Tie Bars, Steering-Kicker/Auxiliary Outboard Steering Kit
Tie Bars, Steering-Kicker/Auxiliary Outboard Steering Kit

Install this kit on Evinrude E-TEC G2 200-300 HP 74 V6 Evinrude
(3.4 L) Dynamic Power Stering (DPS) models only. DO NOT E-TEC G2
install on any other models.
Allows steering of the auxiliary outboard by the main engine.
Designed to fit Evinrude 15H.O. or other portable outboards
with through-tilt tube steering.
Refer to installation instructions for application limitations. Digital Shift
& Throttle
Go to BOSSWeb for details.
Digital
Gauges &
5009573 MWS

5009573 Kicker engine steering tie bar kit, Main engine attached to transom no Jack plate 1
SystemCheck
5009862 Kicker engine steering tie bar kit, Main engine attached to a vertical lifting jack plate 1 Gauges
& MWS
Network Cables, ICON TM G2

ICON TM G2 accessory harnesses
Recommended stocking essential Portable
Standard and accessory extension cables. 4-Stroke
i-Dock
Joystick
System
Extension Cable Shown
587176 Extension Cable, 1' 1 Rigging
Accessories
587177 Extension Cable, 2' 1

Fuel & Oil
587180 Extension Cable, 15' (standard in multiple engine rigging kits) 1 Systems
Steering
Backbone Cables, ICON TM G2
Included in Rigging Kit
Standard and accessory backbone cables.
Propellers
Backbone Cable Shown

P/N Description Pack qty Oil &
Engine
587173 Backbone cable 15', with yellow connector, male to male connector on each end 1 Care
587174 Backbone cable 20', with yellow connector, male to male connector on each end - included in rigging kits 1
587175 Backbone cable 25', with yellow connector, male to male connector on each end - included in rigging kits 1
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Battery Power Cable, ICON TM G2 Evinrude E-TEC G2
Battery Power Cable, ICON TM G2

Evinrude Recommended stocking essential
E-TEC G2 Standard and accessory battery power cables.
Digital Shift
& Throttle Battery Power Cable Shown
766592 Network Battery Power cable, 15' (included in rigging kits) 1
Digital
Gauges & 587183 Network Battery Power cable, 25' 1
MWS
587185 Extension Cable, 5' (included in single engine binnacle kit) 1
SystemCheck 766596 Adapter "Y" Harness - use with non-factory battery cables for control head battery power 1
Gauges
& MWS
Hub, ICON TM
Service replacement part.
Portable
4-Stroke
587172
i-Dock 587172 6 Port Connector Hub - replacement 1
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Hose - Fuel Line-EPA Guidelines
Hose - Fuel Line-EPA Guidelines

The EPA and CARB have mandated reduced fuel permeation from specific fuel system components. The legislation applies to all marine
manufacturers and component suppliers of fuel hoses, primer bulbs and portable fuel tanks. Evinrude
BRP achieved the EPA mandate and CARB compliance for low permeation fuel hoses in 2009. The EPA and CARB requirement for low E-TEC G2
permeation primer bulbs and portable fuel tanks went into effect on January 1, 2011 and BRP has now met that requirement.
As a user of Evinrude/Johnson Genuine Parts you can install and sell our components with complete confidence of compliance to the
regulations and achieving the same level of durability, reliability and quality.
The fuel components listed are all EPA and CARB compliant.
Digital Shift
& Throttle
Hose - Fuel Line Bulk, EPA Compliant
Bulk fuel line may be shipped in a non-continuous roll.
Priced by the foot in multiples of dealer pack quantity
SAE J30R9 rated hose (EPA compliant)
Meets USCG B1-15 spec Digital
Gauges &
772576 also meets USCG A-1 spec MWS
772564
SystemCheck
P/N Description Pack qty Length Dia. Gauges
& MWS
772564 Fuel Line 25 25' 5/16" ID
772565 Fuel Line 50 50' 3/8" ID
772572 Multi-Purpose Hose 25 25' 1/4" ID Portable

4-Stroke
772576 USCG A-1 Hose 50 50' 3/8" ID
Filter - Fuel & Water Separator Kit - 25 Micron

Filters out dirt, lint and water. For all outboards and stern drives. i-Dock
Includes replacement spin-on filter Joystick
System
Use 1/4 male pipe thread fittings (not included)
Rigging
Accessories
174176
174176 Fuel Filter Kit (POP) - 25 Micron 1
Fuel & Oil
502905 Replacement Fuel Filter - 25 Micron, 1" thread size 1 Systems
Fitting - Fuel, for Filter/Water Separator

Steering
778775
P/N Description Pack qty Propellers
778775 Fuel Fitting 1/4" x 5/16" 90 1
Fitting - Fuel, for Filter/Water Separator Oil &

Engine
Care
Reference
778776 Drawings
Description Pack qty & Info
P/N
778776 Fuel Fitting 1/4" x 3/8" 90 (POP) 1
Part
Fitting - Fuel, for Filter/Water Separator Number
May be used with p/n 174179 or p/n 174180 Index
Can be used with Fuel Filter Kit p/n 174176
173311
P/N Description Pack qty Alphabetical
Index
173311 Nipple 1/4" Male Pipe Thread to 1/4" I.D. Vinyl Hose or 5/16" I.D. 1

Fitting - Fuel, for Filter/Water Separator Evinrude E-TEC G2

Evinrude May be used with p/n 174179 or p/n 174180
E-TEC G2 Can be used with Fuel Filter Kit p/n 174176
173312
Digital Shift 173312 Nipple 1/4" Male Pipe Thread to 3/8" I.D. Hose 1
& Throttle
Fitting - Fuel
Can be used with p/n 173311 or p/n 173312
Digital
Gauges &
MWS
174179
SystemCheck
Gauges 174179 90 Elbow 3/8" Male Pipe Thread to 1/4" Female Pipe Thread 1
& MWS
Valve, Anti-Siphon
Portable
4-Stroke
173274
i-Dock 173273 1/4" Male Pipe Thread to 5/16" I.D. 1
Joystick
System 173274 1/4" Male Pipe Thread to 3/8" Hose 1
173275 1/4" Male Pipe Thread to 3/8" Copper Tube 1
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 Propeller Quick Reference Guide
Propeller Quick Reference Guide

Evinrude
150 - 300 HPEvinrude E-TEC, 25 Models - 90, 115, 130 E-TEC E-TEC G2
Right Left
Hand Hand
Type Blades- Diameter- Pitch Notes
Standard Counter
Rotation Rotation
Digital Shift
767620 Aluminum 3 151/2 11 & Throttle
763453 Aluminum 3 151/2 13
765186 Aluminum 3 15 15
General Purpose
765187 Aluminum 3 14 7/8 17
and Economy
765188 Aluminum 3 141/2 19 Digital
Gauges &
765189 Aluminum 3 14.3 21 MWS
763470 Aluminum 3 141/4 23
763959 SSP TBXTM 3 15 5/8 11
Durability and
763960 763961 SSP TBXTM 3 15 5/8 13
General Purpose SystemCheck
763962 763963 SSP TBXTM 3 15 15 Gauges
& MWS
763910 763911 ViperTM TBXTM 3 15 14
763912 763913 ViperTM TBXTM 3 14 3/4 16
763914 763915 ViperTM TBXTM 3 14 3/4 17
763916 763917 ViperTM TBXTM 3 14 3/4 18 All-around General
Portable
Purpose, Bow 4-Stroke
763918 763919 ViperTM TBXTM 3 14 3/4 19 Lifter
763920 763921 ViperTM TBXTM 3 14 3/4 20
763922 763923 ViperTM TBXTM 3 14 1/2 21
763924 763925 ViperTM TBXTM 3 14 1/4 22 i-Dock
763936 763937 CycloneTM TBXTM 4 14 1/2 15 Joystick
System
763938 763939 CycloneTM TBXTM 4 14 1/4 17
763940 763941 CycloneTM TBXTM 4 14 1/8 18
Cruising and
763942 763943 CycloneTM TBXTM 4 14 1/8 19
Transom Lift
763944 763945 CycloneTM TBXTM 4 14 20 Rigging
763946 763947 CycloneTM TBXTM 4 14 21 Accessories
763948 763949 CycloneTM TBXTM 4 14 23
763984 763985 Rebel TBXTM 3 15 3/4 15
763986 763987 Rebel TBXTM 3 15 1/2 17
Fuel & Oil
763988 763989 Rebel TBXTM 3 15 3/8 18 Systems
763990 763991 Rebel TBXTM 3 15 1/4 19 Faster Cruising
Speeds and
763992 763993 Rebel TBXTM 3 15 1/8 20
Improved Fuel
763994 763995 Rebel TBXTM 3 15 21 Economy
763996 763997 Rebel TBXTM 3 14 7/8 22
Steering
763998 763999 Rebel TBXTM 3 14 3/4 23
764000 764001 Rebel TBXTM 3 14 1/2 25
177304 Raker H.O. with Variable Vent Ports (no TBXTM Hub) 3 14 1/2 22
177305 Raker H.O. with Variable Vent Ports (no TBXTM Hub) 3 14 1/2 24 Maximize speed
177308 Raker H.O. with Variable Vent Ports (no TBXTM Hub) 3 14 1/2 25 and optimize Propellers
177306 Raker H.O. with Variable Vent Ports (no TBXTM Hub) 3 14 1/2 26 acceleration
177340 177341 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 16
177320 177321 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 18 For optimal Oil &
mid-range fuel Engine
177322 177323 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 20 economy, rough Care
177324 177325 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 22 water bite and
177326 177327 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 24 bow lift - offshore,
inshore, pontoon,
177328 Rx4TM with Variable Vent Ports no
( TBXTM Hub ) 4 15 25 runabouts Reference
177330 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 26 Drawings
& Info
Note: All Evinrude/Johnson Propellers have a 3-Year Limited Warranty!
Part
Number
Index
Alphabetical
Index

ICONTM G2 System Single Binnacle Evinrude E-TEC G2
ICON TM G2 System Single Binnacle

Evinrude Connection Diagram
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 ICONTM G2 System Single Binnacle
ICON TM G2 System Single Binnacle

Connection Diagram Parts List Evinrude
Ref Description P/N Notes E-TEC G2
1 Key Switch (OFF ON START) 768746
2 Single Binnacle Mount Remote Control 766563

Digital Shift
3 Remote Control Harness 587168 & Throttle
4 Key Switch Connection
5 Remote Control to NMEA 2000 Network Connection
6 Accessory Power Out (12 VDC) Digital

Gauges &
7 Remote Control Network Connection MWS
8 Network Power In (12 VDC)
9 Oil Level 1 & 2

SystemCheck
10 Fuel Level 1 & 2 Gauges
& MWS
11 Trim Switch Connection
12 Terminator Kit 764155
13 Power Node and Tee Kit 767433 3 Amp fuse Portable

4-Stroke
14 Connection to NMEA 2000 Digital Display
15 Connection to NMEA 2000 Network
16 NMEA 2000 Buss Cables

i-Dock
Joystick
2 ft. (0.6 m) 765132
System
6 ft. (1.8 m) 764161
15 ft. (4.5 m) 764162
25 ft. (7.6 m) 764163 Rigging

Accessories
17 Backbone Buss Cables
15 ft. (4.5 m) 587173
20 ft. (6.0 m) 587174

Fuel & Oil
25 ft. (7.6m) 587175 Systems
NS Backbone Buss Cable Extensions
1 ft. (0.3 m) 587176
2 ft. (0.6 m) 587177 Steering

4 ft. (1.5 m) 587178
10 ft. (3.0 m) 587179
15 ft. (4.5 m) 587180

Propellers
20 ft. (6.0 m) 587181
25 ft. (7.6 m) 587182
18 Network Power Cable, 15 ft. (4.5 m) 587184 10 Amp fuse

Oil &
18 Network Power Cable, 25 ft. (7.6 m) 587183 10 Amp fuse Engine
Care
NS Network Power Cable Extension, 5 ft. (1.5 m) 587185
19 Fuel Tank Sender Reference

Drawings
20 Connection to NMEA 2000 Accessories GPS, Triducer, etc. & Info
21 Battery Cable, 10 ft. (3.0 m) 587205

Part
21 Battery Cable, 20 ft. (6.0 m) 587302 Number
Index
* "Y" Harness (Optional accessory) 587230 Use to power digital displays & accessories to be powered when the
key switch is ON.
Alphabetical
Index

ICONTM G2 System Dual Binnacle Evinrude E-TEC G2
ICON TM G2 System Dual Binnacle

Evinrude Connection Diagram
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude E-TEC G2 ICONTM G2 System Dual Binnacle
ICON TM G2 System Dual Binnacle

Connection Diagram Parts List
Evinrude
Ref Description P/N Notes E-TEC G2
1 START STOP Switch 5010021
2 Key Switch/ STOP Switch 5010020
3 Dual Binnacle Mount Remote Control 766564 Digital Shift

& Throttle
4 Remote Control Harness 587225
5 Key Switch Connection
6 START STOP Switch Connection

Digital
Gauges &
7 Remote Control to NMEA 2000 Network Connection MWS
8 Accessory Power Out (12 VDC)
9 Remote Control Network Connection
SystemCheck
10 Network Power In (12 VDC) Gauges
& MWS
11 Oil Level 1 & 2
12 Fuel Level 1 & 2
13 Trim Switch Connection

Portable
14 Terminator Kit 764155 4-Stroke
15 Power Node and Tee Kit 767433 3 Amp fuse
16 Connection to NMEA 2000 Digital Display

i-Dock
17 Connection to NMEA 2000 Network Joystick
System
18 NMEA 2000 Buss Cables
2 ft. (0.6 m) 765132
6 ft. (1.8 m) 764161

Rigging
764162 Accessories
15 ft. (4.5 m)
25 ft. (7.6 m) 764163
19 Backbone Buss Cables

Fuel & Oil
15 ft. (4.5 m) 587173 Systems
20 ft. (6.0 m) 587174
25 ft. (7.6m) 587175
NS Backbone Buss Cable Extensions

Steering
1 ft. (0.3 m) 587176
2 ft. (0.6 m) 587177
4 ft. (1.5 m) 587178
10 ft. (3.0 m) 587179 Propellers
15 ft. (4.5 m) 587180
20 ft. (6.0 m) 587181
25 ft. (7.6 m) 587182 Oil &

Engine
20 Network Power Cable, 15 ft. (4.5 m) 587184 10 Amp fuse Care
20 Network Power Cable, 25 ft. (7.6 m) 587183 10 Amp fuse

Reference
Drawings
& Info
21 Fuel Tank Sender
22 6Port Hub 587172

Part
23 Connection to NMEA 2000 Accessories GPS, Triducer, etc. Number
Index

Alphabetical
* "Y" Harness (Optional accessory) 587230 Use to power digital displays & accessories to be powered when the Index
key switch is ON.

Evinrude E-TEC G2
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Shift & Throttle

E-TEC G2
Digital Shift
Gauges &
Gauges
& MWS
Portable
4-Stroke
ICON TM Digital Shift & Throttle Rigging Selection Rigging

Accessories
If using a manual process select ICON TM rigging in the following steps:
1. Select ICON TM Digital Shift and Throttle rigging kit per application.
2. Select ICON TM actuator kit.
3. Select instrument style and type: ICON TM or I-CommandTM digital. Fuel & Oil
Systems
4. Select oil tanks.
6. Select propeller.
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

ICONTM System Digital Shift & Throttle
ICON TM System
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Shift & Throttle Rigging Kit, ICONTM Selection Chart
Rigging Kit, ICON TM Selection Chart

Evinrude
Step 1: Select number of engines 1 2 3 4
E-TEC G2
Step 2: Select appropriate remote Concealed Side Single Lever

Dual Lever Binnacle Mount
control Mount Binnacle Mount
Step 3: Order P/N for main or Rigging Kit P/N Rigging Kit P/N Rigging Kit P/N Rigging Kit P/N Rigging Kit P/N Digital Shift
single station rigging kit 767052 767042 767044 767046 767048 & Throttle
Main Station Rigging Kits include:

ICON Remote control 765412 765381 765382 765383 765384
Master Power/Key Switch 765371 765373 765374 765371 765371
Digital
Start/Stop Switch Panel 765378 765375 765376 Gauges &
Trim Switch Panel 765388 765389 MWS
Network Power Cable 764921
ICON Gateway Module Kit 764922
ICON Accessory Power Relay 765296 SystemCheck
ICON Hubs (2) 764943 Gauges
& MWS
Bus Cable Extension 15(4.57m) (kit includes 1 buss
764948
cable per engine)
Bus Cable Backbone 20(6. 1m) 764950
Bus Cable Backbone 25(7.4m) 764951 Portable
Engine Identity Plug ID#1 764916 4-Stroke
Engine Identity Plug ID#2 764917
Engine Identity Plug ID#3 764918
ICON Remote Control Users Guide 765410 764954
i-Dock
Installation Instructions Included: Joystick
ICON Remote Controls 355248 355084 System
ICON Switch Panels 355085 355085
ICON Gateway Module & Cable Kit 355086 355086
ICON Accessory Power Relay Kit 355087 355087
ICON Quick Connect Guide 765409 764953 Rigging
Accessories
Step 4 (optional): Order P/N for Concealed
Rigging Kit P/N Rigging Kit P/N Rigging Kit P/N Rigging Kit P/N
SideMount
secondstationriggingkit 767043 767045 767047 767049
RiggingKit
Second Station Rigging Kits Include:
ICON Remote control 765381 765382 765383 765384 Fuel & Oil
Systems
Emergency stop Switch Panel 765379 765380 765372 765372
Start/Stop Switch Panel 765375 765376
Trim Switch Panel 765388 765389
Bus Cable Extension 15(4.57m) Not Available 764948
Bus Cable Backbone 20(6. 1m) 764949 Steering
Installation Instructions Included:
ICON Remote Controls 355084
ICON Switch Panels 355085
ICON Quick Connect Guide 764953
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Kit, ICONTM Single Engine Concealed Side Mount Digital Shift & Throttle
Rigging Kit, ICON TM Single Engine Concealed Side Mount

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
Refer to ICON TM Rigging Kit Selection Chart for listing of included components.
SystemCheck Refer to ICON TM Connection Diagram for recommended layout and connections.
Gauges
& MWS
767052 Main station, Concealed Side Mount, 20 ft. backbone, 15 ft. engine cable 1
Portable
4-Stroke Rigging Kit, ICON TM Single Engine Binnacle Control
i-Dock
Joystick
System
Rigging
Accessories
Refer to ICON TM Connection Diagram for recommended layout and connections.
Fuel & Oil
Systems
767042 Main station, Binnacle control, 20 ft. backbone, 15 ft. engine cable 1
767043 Second station, Binnacle control, 15 ft. second station extension cable 1
Steering
Rigging Kits, ICON TM Multiple Engine Binnacle Control Main Station
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Refer to ICON TM Connection Diagram for recommended layout and connections.
Part P/N Description Pack qty

Number
767044 Dual engine, Binnacle control, 25 ft. backbone, 15 ft. engine cable 1
Index
767046 Triple engine, Binnacle control, 25 ft. backbone, 15 ft. engine cable 1
767048 Four engine, Binnacle control, 25 ft. backbone, 15 ft. engine cable 1
Alphabetical
Index

Digital Shift & Throttle Rigging Kits, ICONTM Multiple Engine Second Station
Rigging Kits, ICON TM Multiple Engine Second Station

Binnacle Control Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
Refer to ICON TM Rigging Kit Selection Chart for listing of included components. SystemCheck
Refer to ICON TM Connection Diagram for recommended layout and connections. Gauges
& MWS
767045 Dual engine, Binnacle control, 15 ft. second station extension cable 1
767047 Triple engine, Binnacle control, 20 ft. second station extension cable 1 Portable
4-Stroke
767049 Four engine, Binnacle control, 20 ft. second station extension cable 1
Engine Add-On Kit, ICON TM i-Dock

Used to add ICON TM actuators for electronic shift & throttle Joystick
to Evinrude E-TEC 150-300 HP, 2008-thru (NOT DE System
models).
Rigging
Accessories
Fuel & Oil

Systems
P/N Description Application

587279 ICONTM engine add-on kit, 2008 & newer, 200 H.O. - 300 HP ICONTM engine add-on kit, 2008 &
newer, 200 H.O. - 300 HP
Steering
587280 ICONTM engine add-on kit, 2008 & newer, 135 - 200 HP ICONTM engine add-on kit, 2008 &
newer, 135 - 200 HP
Trim Plates, ICON TM

Propellers
controls.
Oil &
Engine
Care
Reference
Drawings
& Info

Part
765076 Trim Plate, single binnacle to ICONTM single, off white 1 Number
Index
765079 Trim Plate, dual binnacle to ICONTM dual, white 1 Alphabetical

Index

Network Cables, ICONTM Digital Shift & Throttle
Network Cables, ICON TM

Evinrude ICON TM accessory harnesses
E-TEC G2
Digital Shift
& Throttle
Extension Cable Shown

Digital
Gauges & 764944 Extension cable, 1' 1
MWS
764945 Extension cable, 2' 1

SystemCheck 764947 Extension cable, 10' 1
Gauges
& MWS 764948 Extension cable, 15' (included in main station rigging kits) 1

Portable
4-Stroke
Backbone Cables, ICON TM
Included in Rigging Kit
Standard and accessory backbone cables
i-Dock
Joystick
System
Rigging
Accessories Backbone Cable Shown
764950 Backbone cable 20', with yellow connector, male to connector on each end 1
Fuel & Oil 764951 Backbone cable 25', with yellow connector, male to connector on each end 1
Systems
Battery Power Cable, ICON TM

Standard and accessory power cable
Steering
Propellers
Battery Power Cable Shown

Engine
764921 Network Battery Power cable, 10' (included in rigging kit) 1
Care
764967 Network Battery Power cable, 25' 1
Reference Hub, ICON TM

Drawings
& Info Service replacement part
Part
Number
Index
764943
Alphabetical 764943 6 Port Connector Hub - replacement (2-included in rigging kit) 1

Index

Digital Shift & Throttle Evinrude ICONTM Electric Shift & Throttle Network System
Evinrude ICON TM Electric Shift & Throttle Network System

With I-CommandTM or ICON TM Gauges Evinrude
Evinrude ICON TM is designed to use I-Command TM or ICON TM gauges. The ICON TM Gateway provides the connection to the E-TEC G2
I-CommandTM network. The Gateway includes additional functionality as the analog to digital converter for fuel tank level supporting
input from one to four fuel tanks.
Use the table below to identify recommended I-Command TM components. Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Item P/N Description
1 767991 I-Command Gauge and Tee, 3.5 in.

Fuel & Oil
2 764155 Terminator Kit (1 per boat) Systems
3 767488 GPS Module and Tee
4 764181 Memory Module and Tee
5 764151 Tee Connector, Individual (Included with gauge)

Steering
6 764922 Gateway Module Kit (Includes 5, 6, 7 & 9)
7 764945 Bus Extension Cable, ICON 2 ft.
8 764943 Hub, ICON
9 764161 Bus Extension Cable, I-Command 6 ft. Propellers
10 N/A Fuel Tank Sending Unit Inputs (4 Total)
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

ICONTM Gauges, Basic Series Digital Shift & Throttle

E-TEC G2 Basic functions in a high value, lower cost package
User Friendly - no push buttons to push, no setup required.
Just straight accurate engine information.
NMEA 2000 network
Digital Shift Easy plug and play daisy chain connections between the
& Throttle tachometer and accessory gauges simplify wiring.
Works on Evinrude E-TEC 40-hp through 300-hp.
Digital
Gauges & fuel level, battery volts, engine trim, engine temperature and
MWS oil tank level.
Engine fault warning lights low oil, no oil, overheat, check Chrome Bezel, White Dial Face or Black Dial Face
engine
Fog resistant lens
SystemCheck
Gauges
& MWS
Portable 766159 766182 3" (89mm), ICON Basic Tachometer with System Check Kit 1
4-Stroke

i-Dock
Joystick
System
engine applications.
Rigging Single engine application
Accessories
Trim
Fuel & Oil
engine
Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Shift & Throttle ICONTM Gauges, Pro Series

Specialized functions include GPS speed, fuel management,
fuel economy, trip logs and many more.
NMEA 2000 network.
Works on Evinrude E-TEC 40-hp through 300-hp. Digital Shift
Supports up to 4 engines. & Throttle
Supports up to 4 fuel tanks.
oil tank level.
Multi-language support. Digital
Gauges &
Engine fault warning lights. MWS
Fog resistant lens.
Fault code support for Evinrude E-TEC G2.
Support for Evinrude E-TEC G2 mode control of DPS and
i-Trim. Chrome Bezel, White Dial Face or Black Dial Face SystemCheck
Does not support Evinrude E-TEC G2 foot throttle transfer. Gauges
& MWS
Portable
Black P/N White P/N Description Pack qty 4-Stroke
i-Dock
Joystick
System
ICON TM Gauges, Accessory, 2 Diameter

ICON TM Accessory Gauges are the perfect complement to
the ICON TM Pro, ICON TM Basic 3-n-1 and ICONTM Basic Main
Gauges. Rigging
Accessories
Fuel & Oil

Systems
From adding a single fuel gauge to trying to simulate a fighter

jet cockpit, EvinrudeICON TM accessory gauges complete your
console. These 2.0 in. (51 mm) gauges are available with a black
or white dial face. Steering

766173 766196 ICON Basic Trim gauge kit, 2" (50.8mm) - includes 12" harness 1
766174 766197 ICON Basic Oil Level gauge kit, 2" (50.8mm) Single Engine - includes 12" harness 1
Propellers
766175 766198 ICON Basic Water Temperature gauge kit, 2" (50.8mm) - includes 12" harness 1
Oil &
766177 766200 ICON Basic Fuel Level gauge kit - Tank 2, 2" (50.8mm) - includes 12" harness 1 Engine
Care
1 Reference
766180 766203 ICON Basic Voltmeter gauge kit - Battery 2, 2" (50.8mm) - includes 12" harness
Drawings
766181 766204 ICON Basic Voltmeter gauge kit - Battery 3, 2" (50.8mm) - includes 12" harness 1 & Info
766172 766195 ICON Basic 60 PSI Water Pressure gauge kit, 2" (50.8mm) - requires water ppressure sensor 1 Part
Number
Index
Alphabetical
Index

ICONTM Gauge, Additional Accessories Digital Shift & Throttle

Evinrude P/N Description Pack qty
E-TEC G2
764193 Paddle Wheel Kit - SOW input (NMEA 200 compatible) 1

Digital Shift
& Throttle

Digital
Gauges & 765513 Jumper Harness, Gauge to Gauge, 16" - use for longer distances from main harness 1
MWS
SystemCheck 766105 Studded Back Clamp for 2" Gauge - service replacement part 1
Gauges
& MWS 766106 Studded Back Clamp for 3.5" Gauge - service replacement part 1
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Shift & Throttle Gauges, Digital - 3.5 I-Command TM
Gauges, Digital - 3.5 I-Command TM

Includes network tee & horn. Evinrude
Fault code support for Evinrude E-TEC G2. E-TEC G2
Does not support Evinrude E-TEC G2 mode control of DPS,
i-Trim and Foot throttle transfer.
Digital Shift
& Throttle
767991
Digital
MWS
767991 3.5" I-CommandTM Multi-Function Gauge (includes hardware & horn) 1
764593 I-CommandTM Digital Mounting Bracket & Hardware Kit, includes Horn for 3.5" Gauge 1
SystemCheck
Gauges
Gauges, Digital - 2 I-Command TM & MWS
Includes network tee & horn.
Portable
4-Stroke
764177
i-Dock
Joystick
766025 2" I-CommandTM Multi-Function Gauge (includes hardware & horn) 1
Gauges - I-Command TM Accessory & Replacement Bezels Rigging

Accessories
Change the look of I-CommandTM instruments with Chrome,
Gold or White bezels. Simply remove the standard black bezel
and snap on the accessory colored bezel.
Fuel & Oil

Systems
Steering
P/N Description Color

764012 I-CommandTM Digital Bezel 2", plastic White Propellers
764013 I-CommandTM Digital Bezel 3.5", plastic White
764641 I-CommandTM Digital Bezel 2", plastic Chrome
764640 I-CommandTM Digital Bezel 3.5", plastic Chrome Oil &

Engine
764594 I-CommandTM Digital Bezel 2", plastic Black Care
764595 I-CommandTM Digital Bezel 3.5", plastic Black
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Gauges - I-CommandTM and ICONTM Gauge Accessory Rims Digital Shift & Throttle
Gauges - I-Command TM and ICON TM Gauge Accessory Rims

Evinrude Add a custom touch to the Evinrude instruments with these
E-TEC G2 great looking gauge rims. The color selection is sure to make
your dashboard stand out and be noticed.
Powder coated for durability and superior high gloss finish
Available in 7 colors
3 3/8 and 2 1/8 gauge hole sizes
Digital Shift Can also be used with analog gauges
& Throttle
Digital
Gauges &
MWS P/N Description Color
766352 2" Angled Gauge Rim, aluminum Blue
764256 2 1/8" Gauge Rim, aluminum Blue

SystemCheck
Gauges 764257 3 3/8" Gauge Rim, aluminum Blue
& MWS
766354 31/2" Angled Gauge Rim, aluminum Blue
766350 5" Gauge Rim, aluminum Blue
Portable 766356 5" Angled Gauge Rim, aluminum Blue

4-Stroke
766353 2" Angled Gauge Rim, aluminum Red
764258 2 1/8" Gauge Rim, aluminum Red

i-Dock
Joystick 766355 31/2" Angled Gauge Rim, aluminum Red
System
766351 5" Gauge Rim, aluminum Red
Rigging 764260 2 1/8" Gauge Rim, aluminum Black

Accessories
764261 3 3/8" Gauge Rim, aluminum Black
764262 2 1/8" Gauge Rim, aluminum White

Fuel & Oil
Systems 764264 2 1/8" Gauge Rim, aluminum Gold
764265 3 3/8" Gauge Rim, aluminum Gold
764266 2 1/8" Gauge Rim, aluminum Chrome
Steering 764267 3 3/8" Gauge Rim, aluminum Chrome
764268 2 1/8" Gauge Rim, aluminum Platinum
Propellers Terminator Kit, I-Command TM and ICON TM Gauge

Includes one female and one male terminator
One terminator kit required per vessel
Oil &
Engine
Care
764155
Reference
Drawings 764155 Terminator Kit 1
& Info
Part
Number
Index
Alphabetical
Index

Digital Shift & Throttle Harness, Extension Network BUSS Cable,

I-CommandTM and ICON TM Gauge . Evinrude
Used to extend the harness between the engine and the helm of E-TEC G2
Required to extend gauge network cables from main station
Digital Shift
& Throttle
764163
765132 2' Network bus Cable, 2' Digital
Gauges &
764161 6' Network bus Cable, 6' MWS

SystemCheck
Gauges
& MWS
GPS Module & Tee, I-Command TM and ICON TM Gauge
Required to view GPS speed over ground (SOG), longitude and
latitude, time, and to support fuel management functions.
Portable
4-Stroke
i-Dock
Joystick
767488 System

767488 16" GPS Antenna - SOG input (NMEA 200 compatible) Rigging
Accessories
Memory Module Kit, I-Command TM and ICON TM Gauge

Used to support fuel management functionality to the
I-Command TM gauges. Works with up to 5 engine applications.
Fuel & Oil
One per vessel for 1 to 3 engines. Systems
Two per vessel for 4 to 5 engines
Not Required with ICON TM Pro gauge.
764181
Length Description Steering
P/N
764181 18" Memory Module Kit
Speed/Fuel Economy Kit, I-Command TM and ICON TM Gauge

Propellers
Used to provide complete fuel management functionality to
the I-CommandTM gauges. Works with single, dual or triple
applications.
Includes two network tees, GPS and memory module.
One kit per vessel.
Oil &
Not required with ICON TM Pro Gauge. Engine
Care
764315
Reference
Drawings
& Info
764315 Speed/Fuel Economy Kit 1
Part
Number
Index
Alphabetical
Index

Water Pressure Sensor Kits, I-Command TM Digital Shift & Throttle
Water Pressure Sensor Kits, I-Command TM

Evinrude Required to view water pressure on I-Command TM, ICON TM and
E-TEC G2 ICON TM Touch gauges.
gauges and ICON TM Touch displays.
Includes network tees as required
Digital Shift .
& Throttle Order quantity one per engine.
5008640 & 765038
Digital
Gauges & Application Chart
MWS
P/N HP Range Model Year Pressure Range PSI Sensor Mounting Location
5008300 115-200HP 2008 thru 0-30 Engine
SystemCheck 5008640 200HO-300HP 2012 thru 0-60 Engine

Gauges
& MWS 765038 40-90HP and 115-300HP 2008 thru 0-100 I-Command TM

5008300 Block Mounted Water Pressure Sensor Kit, one per engine (0-30 PSI maximum pressure range) - 115-300 HP 2008 1
Portable thru 2011
4-Stroke
5008640 Block Mounted Water Pressure Sensor Kit, one per engine (0-60 PSI maximum pressure range) - 115-300 HP 2012 thru 1
765038 NMEA Network Based Water Pressure Sensor Kit (0-100 PSI pressure range) - 40-90 HP 2008 thru 1
i-Dock
Joystick Tri-Ducer Kit, Paddle Wheel - Transom Mount, I-Command TM & ICON TM Gauge
System
temperature.
Includes a 12 foot lead and one network tee.
Rigging
Accessories
764671
Fuel & Oil P/N Description Pack qty

Systems
Steering Tri-Ducer Kit, Paddle Wheel - Thru Hull, I-Command TM & ICON TM Gauge
depth and, water temperature.
Propellers
764673
Engine
Care 764673 Paddle Wheel Tri-Ducer, Thru Hull, Plastic, Speed, Depth, Temperature (NMEA 200 compatible) 1

Reference Measures speed over water only.
Drawings
& Info
Part
Number
Index
765150
Alphabetical P/N Description Pack qty
Index

Digital Shift & Throttle Temperature Kit, I-Command TM & ICONTM Gauge

Measures fluid, air or mechanical temperatures. Evinrude
Includes a 12' lead and one network tee. E-TEC G2
Digital Shift
& Throttle
764183
Digital
MWS
Tees, Network - Single I-Command TM & ICON TM Gauge SystemCheck

Gauges
Used for adding NMEA 2000 devices to the network. & MWS
P/N Description Application Portable
4-Stroke
i-Dock
Oil Tank Kits without Oil Level Sender Joystick
System
Oil tank kits come complete with mounting hardware, oil supply
hose and primer assembly.
1.8 gallon (10.2Lx7.8Wx9H)
3 gallon (11.8Lx8Wx11H)
5008617 Oil supply hose is 1/4", 15 ft. long Rigging
5008613 Oil supply hose is 1/4", 25 ft. long Accessories
5008617
P/N Description Pack qty Fuel & Oil
Systems
5008617 1.8 Gallon Tank without Oil Level Sender (15' hose) 1
5008613 3.0 Gallon Tank Kit without Oil Level Sender (25' hose) 1
Oil Level Converter Kits with Sender, I-Command TM Steering
Used to add oil level sender capability to 1.8 gallon, 3.0 gallon or
10 gallon oil tank.
sensor and network tees
Propellers
764271
Oil &
Care
764273 Oil Level Converter Kit - Dual Engine (1.8 gallons) 1 Reference
Drawings
764274 Oil Level Converter Kit - Dual Engine (3.0 gallons) 1 & Info
764275 Oil Level Converter Kit - Triple Engine (3.0 gallons) 1

Part
Number
Index
Alphabetical
Index

Oil Tank Kits with Oil Level Sender Digital Shift & Throttle
Oil Tank Kits with Oil Level Sender

Evinrude Oil tank kits come complete with mounting hardware, oil supply
E-TEC G2 hose, primer assembly, and installed oil level sender.

5008619 Oil supply hose is 1/4", 15 ft. long
Digital Shift
& Throttle Requires additional oil level converter
5008619
Digital 5008619 1.8 Gallon Tank with Sender (15' hose) 1
Gauges &
MWS 5008615 3 Gallon Tank Kit with Sender (25' hose) 1
Oil Level Converter Kits, I-Command TM

SystemCheck
Used to convert oil level sender signal to NMEA 2000 oil level
Gauges signal. Available for 1.8 gallon, 3.0 gallon or 10 gallon oil tanks
& MWS
as well as for single, dual or triple engine applications.
Oil level converter kits include the converter cable and network
tees
Portable
4-Stroke 765311
765311 Oil Level Signal Converter Kit, single tank - includes 1 signal converter for 1 oil tank 1
i-Dock
Joystick 765312 Oil Level Signal Converter Kit, twin tanks - includes 2 signal converters for 2 oil tanks 1
System
765313 Oil Level Signal Converter Kit, triple tanks - includes 3 signal converters for 3 oil tanks 1

Rigging
Accessories For twin and triple engine installations, direct injection or carbureted. Uses Evinrude/Johnson oil pick up assembly p/n 5008614 - one pickup assembly
per engine. Installer will be required to drill a third hole for third engine oil pickup.
11.25Hx30.75Lx9W
Oil level sender
Fuel & Oil
Molded fitting for fill and vent hose
Systems
Select additional oil level converter kit, I-Command TM
776580
Steering
Propellers Oil Pick-Up Kits

May be added to the 3.0 gallon tank to operate two oil injection
equipped engines from one oil tank.
Select 3 gallon tank pick-up for installation to 10 gallon oil tank.
One per engine required.
Oil &
Engine
Care
5008614
Reference
Drawings
& Info 5008614 3 Gallon Tank and 10 Gallon Tank, Oil Pick-up (25' hose) 1
5008618 1.8 Gallon Tank, Oil Pick-up 1
Part
Number
Index
Alphabetical
Index

Digital Shift & Throttle Oil Fill Kit, Remote

Evinrude
Mounts on deck for remote filling of oil injection tank. E-TEC G2
Digital Shift
& Throttle
176461 Digital
Gauges &
MWS
766907 25' Oil Fill Hose to Connect Kit and Tank (not for gasoline) - 11/2" I.D. 1 SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Hose - Fuel Line-EPA Guidelines Digital Shift & Throttle

Evinrude The EPA and CARB have mandated reduced fuel permeation from specific fuel system components. The legislation applies to all marine
E-TEC G2 manufacturers and component suppliers of fuel hoses, primer bulbs and portable fuel tanks.
BRP achieved the EPA mandate and CARB compliance for low permeation fuel hoses in 2009. The EPA and CARB requirement for low
Digital Shift
& Throttle
Hose & Primer Bulb Assembly EPA Compliant
3/8 I. D. hose 10' long
SAE J30R9 rated hose
Digital Meets USCG B115 spec
Gauges &
MWS
SystemCheck
Gauges
& MWS P/N Description Pack qty Length Dia.
5008585 No Quick Disconnects (POP) - EPA Compliant 1 10' 3/8"
Portable Fuel Primer Bulb Assembly, EPA Compliant

4-Stroke
Primer bulb assemblies for 5/16 or 3/8 hose.
Meets EPA and Carb requirements for MY12
Point of Purchase Packaged
i-Dock
Joystick
System
5008605
5008605 Primer Bulb Assembly for 5/16" I.D. hose (POP) - EPA Compliant 1
Rigging
Accessories 5008586 Primer Bulb Assembly for 3/8" I. D. hose (POP) - EPA Compliant 1

Fuel & Oil Bulk fuel line may be shipped in a non-continuous roll.
Systems Priced by the foot in multiples of dealer pack quantity
Meets USCG B1-15 spec
772576 also meets USCG A-1 spec
Steering
772564
P/N Description Pack qty Length Dia.
772564 Fuel Line 25 25' 5/16" ID
Propellers
772565 Fuel Line 50 50' 3/8" ID
772572 Multi-Purpose Hose 25 25' 1/4" ID
772576 USCG A-1 Hose 50 50' 3/8" ID

Oil &
Engine
Care Filter - Fuel & Water Separator Kit - 25 Micron
Filters out dirt, lint and water. For all outboards and stern drives.
Includes replacement spin-on filter
Reference Use 1/4 male pipe thread fittings (not included)
Drawings
& Info
Part 174176
Number
502905 Replacement Fuel Filter - 25 Micron, 1" thread size 1

Alphabetical
Index

Digital Shift & Throttle Fitting - Fuel, for Filter/Water Separator

Evinrude
E-TEC G2
778775 Digital Shift

& Throttle
778775 Fuel Fitting 1/4" x 5/16" 90 1
Digital
Fitting - Fuel, for Filter/Water Separator Gauges &
MWS
SystemCheck
Gauges
778776 & MWS

Portable
4-Stroke
May be used with p/n 174179 or p/n 174180
i-Dock
173311 Joystick
System
Rigging
Fitting - Fuel, for Filter/Water Separator Accessories
173312
Fuel & Oil
P/N Description Pack qty Systems
173312 Nipple 1/4" Male Pipe Thread to 3/8" I.D. Hose 1
Fitting - Fuel Steering

174179
Propellers
174179 90 Elbow 3/8" Male Pipe Thread to 1/4" Female Pipe Thread 1
Valve, Anti-Siphon Oil &

Engine
Care
173274
Reference
& Info
173273 1/4" Male Pipe Thread to 5/16" I.D. 1
173274 1/4" Male Pipe Thread to 3/8" Hose 1
173275 1/4" Male Pipe Thread to 3/8" Copper Tube 1 Part

Number
Index
Alphabetical
Index

Propeller Quick Reference Guide Digital Shift & Throttle

Evinrude
E-TEC G2
150 - 300 HPEvinrude E-TEC, 25 Models - 90, 115, 130 E-TEC
Right Left
Hand Hand
Standard Counter
Rotation Rotation
Digital Shift
& Throttle 767620 Aluminum 3 151/2 11
763453 Aluminum 3 151/2 13
765186 Aluminum 3 15 15
General Purpose
765187 Aluminum 3 14 7/8 17
and Economy
Digital 765188 Aluminum 3 141/2 19
Gauges &
MWS 765189 Aluminum 3 14.3 21
763470 Aluminum 3 141/4 23
763959 SSP TBXTM 3 15 5/8 11
Durability and
763960 763961 SSP TBXTM 3 15 5/8 13
SystemCheck General Purpose
Gauges 763962 763963 SSP TBXTM 3 15 15
& MWS
763910 763911 ViperTM TBXTM 3 15 14
763912 763913 ViperTM TBXTM 3 14 3/4 16
763914 763915 ViperTM TBXTM 3 14 3/4 17
Portable
4-Stroke Purpose, Bow
763920 763921 ViperTM TBXTM 3 14 3/4 20
763922 763923 ViperTM TBXTM 3 14 1/2 21
i-Dock 763924 763925 ViperTM TBXTM 3 14 1/4 22
Joystick 763936 763937 CycloneTM TBXTM 4 14 1/2 15
System
763938 763939 CycloneTM TBXTM 4 14 1/4 17
763940 763941 CycloneTM TBXTM 4 14 1/8 18
Cruising and
763942 763943 CycloneTM TBXTM 4 14 1/8 19
Transom Lift
Rigging 763944 763945 CycloneTM TBXTM 4 14 20
Accessories 763946 763947 CycloneTM TBXTM 4 14 21
763948 763949 CycloneTM TBXTM 4 14 23
763984 763985 Rebel TBXTM 3 15 3/4 15
763986 763987 Rebel TBXTM 3 15 1/2 17
Fuel & Oil
Systems 763988 763989 Rebel TBXTM 3 15 3/8 18
Speeds and
763992 763993 Rebel TBXTM 3 15 1/8 20
Improved Fuel
763996 763997 Rebel TBXTM 3 14 7/8 22
Steering
763998 763999 Rebel TBXTM 3 14 3/4 23
764000 764001 Rebel TBXTM 3 14 1/2 25
Propellers 177308 Raker H.O. with Variable Vent Ports (no TBXTM Hub) 3 14 1/2 25 and optimize
Oil & 177320 177321 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 18 For optimal
Engine mid-range fuel
Care 177322 177323 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 20 economy, rough
inshore, pontoon,
( TBXTM Hub ) 4 15 25 runabouts
Reference
Drawings 177330 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 26
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS
Notes
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Notes Digital Gauges & MWS
Notes
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS E-RIG Rigging Configurator

E-TEC G2
Digital Shift
Gauges &
Gauges
& MWS
Portable
4-Stroke
Digital Gauges & Displays Rigging Selection Rigging

Accessories
If using a manual process select rigging for Digital Gauges and Displays in the following steps:
1. Select shift and throttle controls in rigging kits or by individual assemblies.

2. Select ignition/TNT wire harness and key switch.
3. Select instrument style and type: I-Command TM digital, ICON TM Basic or ICON TM Pro. Fuel & Oil
Systems
4. Select Snap-In HE or Snap-In Classic control cables.
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

I-CommandTM Digital Gauge and Network Components Digital Gauges & MWS
I-Command TM Digital Gauge and Network Components

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS ICONTM Gauge and Network Components
ICON TM Gauge and Network Components

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

ICON TM Gauge Network Components Systems
Item Description Item Description
1 Tachometer 7 Trim Sender
2 Speedometer 8 Network power supply

Steering
3 Accessory gauge 9 T-Connectors
4 Remote control 10 EMM Cable
5 Switched battery power 11 Fuel level sender
6 Ground 12 MWS Harness Propellers
ICON TM gauges are available in different styles, diameters and black or white dial faces.
ICON TM PRO gauges display of over 47 types of engine and vessel information, including fuel management.* ICON TM PRO gauges
come in standard 3.5 inch (89 mm) and 5 inch (127 mm) diameter Oil &
ICON TM 3n1 gauges offer 3 gauges in one giant size, 5 inch (127 mm) diameter gauge Engine
Care
Select a Tachometer (RPM, engine temperature, volts, SystemCheck lights) and Speedometer (Speed, engine trim, fuel level)
ICON TM Basic gauges are available as Speedometer and Tachometer with SystemCheck lights
Select accessory 2 inch (51 mm) gauge to compliment ICON TM PRO, ICON TM 3N1 and ICON TM Basic main gauges Reference
Drawings
Accessory sensors are required to enable certain functions. & Info
Select the GPS sensor for accurate speed and fuel economy display
Select water pressure sensors to display engine water pressure
Select accessory oil level converters to add display of oil tank level
Additional ICON TM and I-Command TM network components are listed in the ICON TM gauge section Part
Number
Choose oil tanks, control cables, fuel system components, steering components and propellers to complete boat rigging. Index
For Multi-station rigging use the ICON TM EST system.
Alphabetical
Index

Rigging Kits, I-Command TM Single Engine Digital Gauges & MWS
Rigging Kits, I-CommandTM Single Engine

Evinrude I-Command TM Digital rigging kits provide the ultimate in rigging convenience. Choose your rigging kit and the appropriate Ignition/TNT harness and
E-TEC G2 you've got everything you need to install a basic I-Command TM Digital system. From there you can add more gauges or optional accessories to activate
advanced features of the I-Command TM Digital gauges. These new kits feature the easy to assemble and install DeviceNet TM Micro-CTM connector. With
these rigging kits it makes I-CommandTM Digital component selection easy.
KIT P/N 764309 Shown

Digital Shift
& Throttle
Digital
Gauges &
MWS
5006186 5008617 764155 764157
SystemCheck
Gauges
& MWS
Portable
4-Stroke
766026 767991 768451 764163
i-Dock Rigging Kit, I-Command TM Single Engine 764309

Joystick
System I-Command TM Digital Single Binnacle (for single binnacles WITH KEY ).
Rigging kit includes:

5006186 - Single lever binnacle control with key
764163 - Network buss cable, 25'
Rigging 5008617 - 1.8 Gallon oil tank
Accessories 766026 - EMM Harness kit, 15'
764155 - Terminator kit
764157 - Power supply kit (single engine)
767991 - 3.5 Multi-function I-Command TM digital gauge
768451 - Fuel level converter kit, single fuel tank
Requires additional Ignition/TNT Harness (order to length)
Fuel & Oil
Systems
5006186
Refer to I-Command TM Sample Network Diagram for recommended layout and connections.
Steering
764309 I-Command Digital Single Binnacle Rigging Kit (for single lever binnacle control with key) 1
5006186 Single Level Binnacle Control with Key Switch 1
Propellers
Rigging Kit, I-Command TM Single Engine 764310
I-Command TM Digital Single Binnacle (for single binnacles WITHOUT KEY).

Oil &
5006182 - Single lever binnacle control without key
Engine 764163 - Network buss cable, 25'
Care 176408 - Single engine key/stop switch
5008617 - 1.8 Gallon oil tank
766026 - EMM Harness kit, 15'
Reference 764157 - Power supply kit (single engine)
Drawings 767991 - 3.5 Multi-function I-Command TM digital gauge
& Info 768451 - Fuel level converter kit, single fuel tank
5006182
Part
Number Refer to I-Command TM Sample Network Diagram for recommended layout and connections.
Index
764310 I-CommandTM Digital Single Binnacle Rigging Kit (for single lever binnacle control without key) 1
Alphabetical 5006182 Single Level Binnacle Control without Key Switch 1
Index

Digital Gauges & MWS Rigging Kit, I-CommandTM Single Engine 764311
Rigging Kit, I-CommandTM Single Engine 764311

I-Command TM Digital Surface Mount (for surface side mount WITH KEY). Evinrude
E-TEC G2
5006180 - Surface side mount control with key
5008617 - 1.8 Gallon oil tank
Digital Shift
& Throttle
Digital
Gauges &
MWS
5006180
P/N Description Pack qty SystemCheck

Gauges
764311 I-CommandTM Digital Surface Side Mount Rigging Kit, with key 1 & MWS
5006180 Surface mount control with ignition, trim switch, switch 1
Rigging Kit, I-CommandTM Single Engine 764312 Portable

4-Stroke
I-Command TM Digital Concealed Side Mount (for concealed side mount).

5006561 - Concealed side mount control
764163 - Network buss cable, 25' i-Dock
176408 - Single engine key/stop switch Joystick
5008617 - 1.8 Gallon oil tank System
768452 - Fuel level converter kit, single fuel tank Rigging
Requires additional Ignition/TNT Harness (order to length) Accessories
5006561
Refer to I-Command TM Sample Network Diagram for recommended layout and connections. Fuel & Oil
Systems
764312 I-CommandTM Digital Concealed Side Mount Rigging Kit with key 1
5006561 Concealed Side Mount Control 1

Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Kits, I-Command TM Dual Engine Digital Gauges & MWS
Rigging Kits, I-CommandTM Dual Engine

Evinrude I-Command TM Digital rigging kits provide the ultimate in rigging convenience. Choose your rigging kit and the appropriate Ignition/TNT harness and
E-TEC G2 you've got everything you need to install a basic I-Command TM Digital system. From there you can add more gauges or optional accessories to activate
advanced features of the I-Command TM Digital gauges. These new kits feature the easy to assemble and install DeviceNet TM Micro-CTM connector. With
these rigging kits it makes I-CommandTM Digital component selection easy.
Kit P/N 764313 Shown

Digital Shift
& Throttle
Digital
Gauges &
MWS
176410
5006184 5008613 764155
SystemCheck
Gauges
& MWS
Portable
4-Stroke
764163 766026 767991 768452 764159
i-Dock Rigging Kit, I-Command TM Dual Engine 764313

Joystick
System I-Command TM Digital Dual Lever Binnacle

5006184 - Dual lever binnacle control
Rigging 176410 - Dual engine key/stop switch
Accessories (2) 5008613 - 3.0 Gallon oil tank
(2) 766026 - EMM Harness kit, 15'
764159 - Power supply kit (multi-engine)
(2) 767991 - 3.5 Multi-function I-Command TM digital gauge
Fuel & Oil Requires additional Ignition/TNT Harness (order to length)
Systems
5006184
Steering
764313 I-CommandTM Digital Dual Lever Binnacle Rigging Kit 1
5006184 Dual Lever/ Dual Engine Binnacle Control 1
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS Wire Harness, Ignition/TNT I-Command TM - Single Engine
Wire Harness, Ignition/TNT I-Command TM - Single Engine

Ignition/TNT - Single Engine. Required for vessels equipped Evinrude
with I-CommandTM in order to view engine trim. E-TEC G2
Runs directly from the helm to the outboard
One harness required per outboard
Includes accessory power leads
Includes built in resistor to support trim display 115-300 HP
Digital Shift
& Throttle
763543
P/N Length Description Digital
Gauges &
763543 15' Ignition/TNT Harness 15' MWS
763544 20' Ignition/TNT Harness 20'
763545 25' Ignition/TNT Harness 25'

SystemCheck
763546 28' Ignition/TNT Harness 28' Gauges
& MWS
Wire Harness, Ignition/TNT I-Command TM - Multi Engine

Ignition/TNT - Multi Engine. Required for multi-engine vessels
equipped with I-CommandTM in order to view engine trim. Portable
Runs directly from the helm to the transom 4-Stroke
Includes appropriate number of accessory power leads
One harness required per vessel
Requires one 6' or 10' multi-engine adapter harness per
outboard to complete connection from transom to outboard i-Dock
Joystick
System
763548
Rigging
763548 20' Ignition/TNT Harness, 2 Engines 20'
Accessories
763549 25' Ignition/TNT Harness, 2 Engines 25'
Wire Harness, Multi-Engine Adapter I-Command TM Fuel & Oil

Required for use with dual or triple engine installations. Systems
Installs at the outboard ends of the harness only
Available in 6 or 10 foot lengths
Order one per engine
Includes built in resistor to support trim display 115-300 HP
Steering
763552
P/N Length Description Propellers
763552 6' Multi-Engine Adapter Harness 6'
763553 10' Multi-Engine Adapter Harness 10'

Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Key Switch Kit - Single Engine Digital Gauges & MWS
Key Switch Kit - Single Engine

Evinrude Connect to main electrical cable when using a control that is not
E-TEC G2 pre-wired. Includes horn and emergency stop switch.
Requires one SystemCheck MWS wiring harness
Digital Shift
& Throttle
176408
Digital
Gauges & 176408 Key Switch Kit 1
MWS
174653 Bezel Kit (bezel and 2 screws) 1
SystemCheck Key Switch Kit - Dual Engine

Gauges
& MWS Connect to main electrical cable when using a control that is not
pre-wired. Includes two horns and emergency stop switch.
Requires two SystemCheck MWS wiring harnesses
Portable
4-Stroke 176410
176410 Dual Key Switch Kit 1
i-Dock 174693 Bezel Kit (bezel and 4 screws) 1
Joystick
System
Ignition Switch with Lanyard
1996 and Newer Models
Rigging
Accessories
Fuel & Oil

Systems
5005801
Steering 5005801 Ignition Switch with Lanyard 1
Keys - 96 Series Key Set

Propellers
176287 96 Series Key Set (includes keys 75, 76, 77, 79) 1
Note: 4 total keys

Oil &
Engine
Care Keys - 96 Series Individual
127591 Ignition Key 75 1
Reference
Drawings 127592 Ignition Key 76 1
& Info

Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS Gauges, Digital - 3.5 I-Command TM
Gauges, Digital - 3.5 I-Command TM

Includes network tee & horn. Evinrude
Fault code support for Evinrude E-TEC G2. E-TEC G2
Does not support Evinrude E-TEC G2 mode control of DPS,
i-Trim and Foot throttle transfer.
Digital Shift
& Throttle
767991
Digital
MWS
767991 3.5" I-CommandTM Multi-Function Gauge (includes hardware & horn) 1
764593 I-CommandTM Digital Mounting Bracket & Hardware Kit, includes Horn for 3.5" Gauge 1
SystemCheck
Gauges
Gauges, Digital - 2 I-Command TM & MWS
Includes network tee & horn.
Portable
4-Stroke
764177
i-Dock
Joystick
766025 2" I-CommandTM Multi-Function Gauge (includes hardware & horn) 1
Gauges - I-Command TM Accessory & Replacement Bezels Rigging

Accessories
Change the look of I-CommandTM instruments with Chrome,
Gold or White bezels. Simply remove the standard black bezel
and snap on the accessory colored bezel.
Fuel & Oil

Systems
Steering

764012 I-CommandTM Digital Bezel 2", plastic White Propellers
764013 I-CommandTM Digital Bezel 3.5", plastic White
764641 I-CommandTM Digital Bezel 2", plastic Chrome
764640 I-CommandTM Digital Bezel 3.5", plastic Chrome Oil &

Engine
764594 I-CommandTM Digital Bezel 2", plastic Black Care
764595 I-CommandTM Digital Bezel 3.5", plastic Black
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

ICONTM Gauges, Basic Series Digital Gauges & MWS

E-TEC G2 Basic functions in a high value, lower cost package
User Friendly - no push buttons to push, no setup required.
Just straight accurate engine information.
NMEA 2000 network
Digital Shift Easy plug and play daisy chain connections between the
& Throttle tachometer and accessory gauges simplify wiring.
Digital
Gauges & fuel level, battery volts, engine trim, engine temperature and
MWS oil tank level.
Engine fault warning lights low oil, no oil, overheat, check Chrome Bezel, White Dial Face or Black Dial Face
engine
Fog resistant lens
SystemCheck
Gauges
& MWS
Portable 766159 766182 3" (89mm), ICON Basic Tachometer with System Check Kit 1
4-Stroke

i-Dock
Joystick
System
engine applications.
Rigging Single engine application
Accessories
Trim
Fuel & Oil
engine
Systems
Steering
Propellers

Oil & Specialized functions include GPS speed, fuel management,
Engine fuel economy, trip logs and many more.
Care Its plug and play. Connects directly into the existing Evinrude
NMEA 2000 network.
Supports up to 4 engines.
Reference Supports up to 4 fuel tanks.
Drawings Accessory gauges provide dedicated display of water pressure,
& Info fuel level, battery volts, engine trim, engine temperature and
oil tank level.
Multi-language support.
Engine fault warning lights.
Part Fog resistant lens.
Number Fault code support for Evinrude E-TEC G2.
Index Support for Evinrude E-TEC G2 mode control of DPS and
i-Trim. Chrome Bezel, White Dial Face or Black Dial Face
Does not support Evinrude E-TEC G2 foot throttle transfer.
Alphabetical
Index

Digital Gauges & MWS ICONTM Gauges, Pro 3.5 Diameter

768053 768054 3" (89mm), ICON Pro LCD 50 MPH Speedometer Kit, Chrome 1 Digital Shift
& Throttle
ICON TM Gauges, Accessory, 2 Diameter

Digital
ICON TM Accessory Gauges are the perfect complement to Gauges &
the ICON TM Pro, ICON TM Basic 3-n-1 and ICON T M Basic Main MWS
Gauges.
SystemCheck
Gauges
& MWS
From adding a single fuel gauge to trying to simulate a fighter

jet cockpit, EvinrudeICON TM accessory gauges complete your Portable
console. These 2.0 in. (51 mm) gauges are available with a black 4-Stroke
or white dial face.
766173 766196 ICON Basic Trim gauge kit, 2" (50.8mm) - includes 12" harness 1 i-Dock
Joystick
766174 766197 ICON Basic Oil Level gauge kit, 2" (50.8mm) Single Engine - includes 12" harness 1 System
766175 766198 ICON Basic Water Temperature gauge kit, 2" (50.8mm) - includes 12" harness 1
Rigging
766176 766199 ICON Basic Fuel Level gauge kit - Tank 1, 2" (50.8mm) - includes 12" harness 1 Accessories
766179 766202 ICON Basic Voltmeter gauge kit - Battery 1, 2" (50.8mm) - includes 12" harness 1 Fuel & Oil
Systems
Steering

Propellers
764193 Paddle Wheel Kit - SOW input (NMEA 200 compatible) 1

Oil &
764671 Paddle Wheel Tri-Ducer, Transom Mount, Speed, Depth, Temperature (NMEA 200 compatible) 1 Engine
Care

Reference
Drawings
& Info
766105 Studded Back Clamp for 2" Gauge - service replacement part 1 Part
Number
766106 Studded Back Clamp for 3.5" Gauge - service replacement part 1 Index
Alphabetical
Index

Gauges - I-CommandTM and ICONTM Gauge Accessory Rims Digital Gauges & MWS

Evinrude Add a custom touch to the Evinrude instruments with these
E-TEC G2 great looking gauge rims. The color selection is sure to make
Digital Shift Can also be used with analog gauges
& Throttle
Digital
Gauges &
MWS P/N Description Color

SystemCheck
Gauges 764257 3 3/8" Gauge Rim, aluminum Blue
& MWS
Portable 766356 5" Angled Gauge Rim, aluminum Blue

4-Stroke

i-Dock
Joystick 766355 31/2" Angled Gauge Rim, aluminum Red
System
Rigging 764260 2 1/8" Gauge Rim, aluminum Black

Accessories

Fuel & Oil
Systems 764264 2 1/8" Gauge Rim, aluminum Gold
Steering 764267 3 3/8" Gauge Rim, aluminum Chrome
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS Connectors - Trim Y
Connectors - Trim Y
To provide electrical connections to tap into the trim harness Evinrude
wit h asecond trim switch (i.e. bow mounted trim). E-TEC G2
176588
P/N Description Pack qty Digital Shift

& Throttle
Digital
Power Supply Kit, I-Command TM and ICON TM Gauge Gauges &
MWS
For Single & Multi-Engines. Provides 12 volt switched power
to the I-Command TM network.
One power supply kit required per vessel
Select appropriate single or multi-engine power supply kit
Not used with ICON TM controls. SystemCheck
Gauges
& MWS
764159 Portable
4-Stroke
764157 Power Supply Kit - Single Engine (not recommended for multiple engine applications) 1
764159 Power Supply Kit - Multi-Engine 1 i-Dock

Joystick
System
Terminator Kit, I-Command TM and ICON TM Gauge
Includes one female and one male terminator
One terminator kit required per vessel
Rigging
Accessories
764155
Systems
764155 Terminator Kit 1
EMM Harness, I-Command TM and ICON TM Gauges

Includes a harness and a tee to link the Evinrude E-TEC Steering
EMM to the NMEA 2000 network.
One EMM harness required per engine on the network.
Use on 135-300 HP
Not used with ICON TM controls.
Propellers
766026
Oil &
766026 15' EMM Harness Kit, 15'
Engine
Care
Fuel Level Converter Kit, I-Command TM and ICON TM Gauge

Converts analog fuel level sender signal to a NMEA 2000 fuel
level signal. Reference
Select for single or multiple tank configuration. Drawings
Unconfigured converter can be programmed to the desired tank & Info
instance and fluid type.
All fuel level converter kits include one network tee.
Not used with ICON TM controls. or gauges.
Part
Number
Index
768452
P/N Description Application

Alphabetical
768452 Fuel Level Converter Kit - I0 Fuel Level Converter Kit - I0 Index

Fluid Level Converter Kit - Unconfigured and ICON TM Gauge Digital Gauges & MWS
Fluid Level Converter Kit - Unconfigured and ICON TM Gauge

Evinrude Converts analog fluid level sender signal to NMEA 2000 fluid
E-TEC G2 level signal. Can be programmed to the desired tank location
and fluid type. System is capable of maximum 3 fluid types per
configuration.
Fluid tank must have a standard 33240 OHM sending unit

Digital Shift installed.
& Throttle Available fluid configurations are: fuel, oil, freshwater,
wastewater, blackwater and livewell.
764166
Digital
Gauges & P/N Description Application
MWS
768452 Fuel Level Converter Kit - I0 Fuel Level Converter Kit - I0
SystemCheck Water Pressure Sensor Kits, I-Command TM

Gauges
& MWS Required to view water pressure on I-Command TM, ICON TM and
ICON TM Touch gauges.
gauges and ICON TM Touch displays.
Portable Includes network tees as required
4-Stroke .
Order quantity one per engine.
5008640 & 765038

i-Dock
Joystick
System Application Chart
P/N HP Range Model Year Pressure Range PSI Sensor Mounting Location
5008300 115-200HP 2008 thru 0-30 Engine

Rigging
Accessories 5008640 200HO-300HP 2012 thru 0-60 Engine
765038 40-90HP and 115-300HP 2008 thru 0-100 I-Command TM

Fuel & Oil 5008300 Block Mounted Water Pressure Sensor Kit, one per engine (0-30 PSI maximum pressure range) - 115-300 HP 2008 1
Systems thru 2011
5008640 Block Mounted Water Pressure Sensor Kit, one per engine (0-60 PSI maximum pressure range) - 115-300 HP 2012 thru 1
765038 NMEA Network Based Water Pressure Sensor Kit (0-100 PSI pressure range) - 40-90 HP 2008 thru 1
Steering
I-Command TM and ICON TM Gauge .
Used to extend the harness between the engine and the helm of
Propellers Required to extend gauge network cables from main station
Oil & 764163

Engine
Care P/N Length Description

Reference
Drawings 764162 15' Network bus Cable, 15'
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS GPS Module & Tee, I-CommandTM and ICONTM Gauge
GPS Module & Tee, I-CommandTM and ICON TM Gauge

Required to view GPS speed over ground (SOG), longitude and Evinrude
latitude, time, and to support fuel management functions. E-TEC G2
Digital Shift
& Throttle
767488
Digital
P/N Length Description Gauges &
MWS
767488 16" GPS Antenna - SOG input (NMEA 200 compatible)
Memory Module Kit, I-Command TM and ICON TM Gauge

Used to support fuel management functionality to the SystemCheck
Gauges
I-CommandTM gauges. Works with up to 5 engine applications. & MWS
One per vessel for 1 to 3 engines.
Two per vessel for 4 to 5 engines
Not Required with ICON TM Pro gauge.
Portable
764181 4-Stroke
764181 18" Memory Module Kit
i-Dock
Joystick
Speed/Fuel Economy Kit, I-Command TM and ICON TM Gauge System
Used to provide complete fuel management functionality to
the I-CommandTM gauges. Works with single, dual or triple
applications.
Includes two network tees, GPS and memory module.
One kit per vessel. Rigging
Not required with ICON TM Pro Gauge. Accessories
764315 Fuel & Oil

Systems

764315 Speed/Fuel Economy Kit 1
Steering
Tri-Ducer Kit, Paddle Wheel - Transom Mount, I-Command TM & ICON TM Gauge
temperature.
Propellers
764671
Oil &
Care

Reference
Drawings
Tri-Ducer Kit, Paddle Wheel - Thru Hull, I-Command TM & ICON TM Gauge & Info
depth and, water temperature.
Part
Number
Index
764673
Index

Speed Kit, Paddle Wheel I-Command TM & ICONTM Gauge Digital Gauges & MWS

Evinrude Measures speed over water only.
E-TEC G2
Digital Shift
& Throttle
765150
Digital
MWS
SystemCheck
Gauges Measures fluid, air or mechanical temperatures.
& MWS Includes a 12' lead and one network tee.
Portable
4-Stroke
i-Dock 764183
Joystick
Rigging Tees, Network - Single I-Command TM & ICON TM Gauge

Accessories
Used for adding NMEA 2000 devices to the network.
Fuel & Oil
Systems P/N Description Application
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS Cables - Control (Shift & Throttle)
Cables - Control (Shift & Throttle)

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Cables - Snap-In HE (High Efficiency) Digital Gauges & MWS
Cables - Snap-In HE (High Efficiency)

Evinrude
E-TEC G2
Digital Shift
& Throttle

764115 15' Snap-In HE Cable Assembly 1
Digital
Gauges & 764116 16' Snap-In HE Cable Assembly 1
MWS
SystemCheck 764119 19' Snap-In HE Cable Assembly 1

Gauges
& MWS 764120 20' Snap-In HE Cable Assembly 1

Portable
4-Stroke 764123 23' Snap-In HE Cable Assembly 1

i-Dock 764126 26' Snap-In HE Cable Assembly 1
Joystick
System 764128 28' Snap-In HE Cable Assembly 1

Rigging
Accessories 764134 34' Snap-In HE Cable Assembly 1
Fuel & Oil 764140 40' Snap-In HE Cable Assembly 1

Systems

Steering
764215 15' Snap-In HE Cable Assembly, 10 pack 10
Propellers 764216 16' Snap-In HE Cable Assembly, 10 pack 10
Oil & 764219 19' Snap-In HE Cable Assembly, 10 pack 10

Engine
Care 764220 20' Snap-In HE Cable Assembly, 10 pack 10

Reference
Drawings 764223 23' Snap-In HE Cable Assembly, 10 pack 10
& Info
Part 764226 26' Snap-In HE Cable Assembly, 10 pack 10

Number
Index
Alphabetical
Index

Digital Gauges & MWS Cables - Snap-In Classic
Cables - Snap-In Classic

Evinrude
E-TEC G2
Digital Shift
& Throttle
173105 5' Snap-In Classic Cable Assembly 1

Digital
173107 7' Snap-In Classic Cable Assembly 1 Gauges &
MWS
173110 10' Snap-In Classic Cable Assembly, 2 pack 2 SystemCheck

Gauges
173111 11' Snap-In Classic Cable Assembly, 2 pack 2 & MWS
173112 12' Snap-In Classic Cable Assembly, 2 pack 2

Portable
173114 14' Snap-In Classic Cable Assembly, 2 pack 2 4-Stroke

i-Dock
Joystick
173118 1 System
18' Snap-In Classic Cable Assembly

Rigging
173011 11' Snap-In Classic Cable Assembly, 30 pack 30 Accessories
173014 14' Snap-In Classic Cable Assembly, 30 pack 30 Fuel & Oil
Systems

Steering
Propellers
Selection of Cable Length
Measure from the inside of the boat, Point A, (desired position of control box) to Point B. Be sure
to include any vertical distance the cable must travel to reach control mounting area. Measure Oil &
from Point B to center line of motor location C. As a guideline, it is recommended that the path Engine
with the least number of bends be selected. Care
Outboard
Add 1 m (40) to this measurement. Choose this cable length, or the next longer size, from the
chart. Two cables are required for single motor installations Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Oil Tank Kits without Oil Level Sender Digital Gauges & MWS
Oil Tank Kits without Oil Level Sender

E-TEC G2 hose and primer assembly.
Digital Shift
& Throttle
5008617
Digital 5008617 1.8 Gallon Tank without Oil Level Sender (15' hose) 1
Gauges &
MWS 5008613 3.0 Gallon Tank Kit without Oil Level Sender (25' hose) 1
Oil Level Converter Kits with Sender, I-Command TM

SystemCheck
Gauges
10 gallon oil tank.
& MWS
Portable
4-Stroke
764271
i-Dock 764271 Oil Level Converter Kit - Single Engine (1.8 gallons) 1
Joystick
System 764272 Oil Level Converter Kit - Single Engine (3.0 gallons) 1

Rigging
Accessories 764275 Oil Level Converter Kit - Triple Engine (3.0 gallons) 1
Fuel & Oil

Systems Oil tank kits come complete with mounting hardware, oil supply
hose, primer assembly, and installed oil level sender.

Steering 5008615 Oil supply hose is 1/4", 25 ft. long
Requires additional oil level converter
5008619
Propellers 5008619 1.8 Gallon Tank with Sender (15' hose) 1
5008615 3 Gallon Tank Kit with Sender (25' hose) 1
Oil & Oil Level Converter Kits, I-Command TM

Engine
Care Used to convert oil level sender signal to NMEA 2000 oil level
signal. Available for 1.8 gallon, 3.0 gallon or 10 gallon oil tanks
Reference tees
Drawings
& Info
765311
Part 765311 Oil Level Signal Converter Kit, single tank - includes 1 signal converter for 1 oil tank 1
Number
Index 765312 Oil Level Signal Converter Kit, twin tanks - includes 2 signal converters for 2 oil tanks 1
Alphabetical
Index

Digital Gauges & MWS Oil Tank Assembly - 10 Gallon

For twin and triple engine installations, direct injection or carbureted. Uses Evinrude/Johnson oil pick up assembly p/n 5008614 - one pickup assembly Evinrude
per engine. Installer will be required to drill a third hole for third engine oil pickup. E-TEC G2
11.25Hx30.75Lx9W
Oil level sender
Molded fitting for fill and vent hose Digital Shift
Select additional oil level converter kit, I-Command TM & Throttle
776580
Digital
Gauges &
P/N Description Pack qty MWS
Oil Pick-Up Kits SystemCheck

Gauges
May be added to the 3.0 gallon tank to operate two oil injection & MWS
Portable
4-Stroke
5008614
P/N Description Pack qty i-Dock
Joystick
5008614 3 Gallon Tank and 10 Gallon Tank, Oil Pick-up (25' hose) 1 System
Oil Fill Kit, Remote Rigging

Accessories

Fuel & Oil
Systems
176461 Steering

Propellers
766907 25' Oil Fill Hose to Connect Kit and Tank (not for gasoline) - 11/2" I.D. 1
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Hose - Fuel Line-EPA Guidelines Digital Gauges & MWS

Evinrude The EPA and CARB have mandated reduced fuel permeation from specific fuel system components. The legislation applies to all marine
E-TEC G2 manufacturers and component suppliers of fuel hoses, primer bulbs and portable fuel tanks.
Digital Shift
& Throttle
Digital Meets USCG B115 spec
Gauges &
MWS
SystemCheck
Gauges
& MWS P/N Description Pack qty Length Dia.
Portable Fuel Primer Bulb Assembly, EPA Compliant

4-Stroke
i-Dock
Joystick
System
5008605
Rigging
Accessories 5008586 Primer Bulb Assembly for 3/8" I. D. hose (POP) - EPA Compliant 1

Fuel & Oil Bulk fuel line may be shipped in a non-continuous roll.
Systems Priced by the foot in multiples of dealer pack quantity
Steering
772564
772564 Fuel Line 25 25' 5/16" ID
Propellers
772565 Fuel Line 50 50' 3/8" ID
772576 USCG A-1 Hose 50 50' 3/8" ID

Oil &
Engine
Care Filter - Fuel & Water Separator Kit - 25 Micron
Reference Use 1/4 male pipe thread fittings (not included)
Drawings
& Info
Part 174176
Number

Alphabetical
Index

Digital Gauges & MWS Fitting - Fuel, for Filter/Water Separator

Evinrude
E-TEC G2

& Throttle
778775 Fuel Fitting 1/4" x 5/16" 90 1
Digital
Fitting - Fuel, for Filter/Water Separator Gauges &
MWS
SystemCheck
Gauges
778776 & MWS

Portable
4-Stroke
i-Dock
173311 Joystick
System
Rigging
Fitting - Fuel, for Filter/Water Separator Accessories
173312
Fuel & Oil
Fitting - Fuel Steering

174179
Propellers
Valve, Anti-Siphon Oil &

Engine
Care
173274
Reference
& Info
173275 1/4" Male Pipe Thread to 3/8" Copper Tube 1 Part

Number
Index
Alphabetical
Index

Propeller Quick Reference Guide Digital Gauges & MWS

Evinrude
E-TEC G2
15H.O.-30 HP Evinrude E-TEC, 2-Stroke
P/N Type Blades Diameter Pitch Notes
5008225 Aluminum 4 11 7 15H.O. High Thrust
Digital Shift 765048 Aluminum 3 11 9
& Throttle
765049 Aluminum 3 101/2 11
765135 Aluminum 4 10.2 11
765050 Aluminum 3 10.3 12
Digital 765136 Aluminum 4 10.1 12 General Purpose and Economy
Gauges &
MWS 778863 Aluminum 3 10.3 13
765137 Aluminum 4 10 13
765138 Aluminum 4 10 14
763486 Aluminum 3 10 15
SystemCheck
Gauges 765139 Aluminum 4 10 15
& MWS 765176 SSP 3 10 11
765174 SSP 4 10 11
765177 SSP 3 10 12
Portable 765175 SSP 4 10 12
Durability and General Purpose
4-Stroke 765178 SSP 3 10 13
766153 SSP 4 10 13
765179 SSP 3 10 14
765180 SSP 3 10 15
i-Dock
Joystick
System 40-130 HP Evinrude E-TEC (Excludes 25 Models)

763300 AluminumTM 3 14 9
Rigging
Accessories 763301 AluminumTM 3 14 11
765181 AluminumTM 3 13 3/4 13
765182 AluminumTM 3 13 1/2 15 General Purpose and Economy
765183 AluminumTM 3 131/4 17
Fuel & Oil 765184 AluminumTM 3 13.2 19
Systems
765185 AluminumTM 3 13.2 21
177201 HydrusTM Aluminum 3 13 7/8 9
177202 HydrusTM Aluminum 3 13 7/8 11 Pontoon boats, High Reverse Thrust
Steering 763957 SSP 3 13 3/4 13
763950 SSP 3 131/2 15
763951 SSP 3 13 1/4 17
763952 SSP 3 13 19
Propellers 763929 ViperTM 3 13 7/8 15
763930 ViperTM 3 13 7/8 17 Swept blade design, General use,
763931 ViperTM 3 13 7/8 19 Bow Lifter
763932 ViperTM 3 13 7/8 21
Oil & 763953 Raker 3 13 1/2 18
Engine 763954 Raker 3 13 1/2 20 High Performance Bow Lifter
Care
763956 Raker 3 13 1/2 24
763964 RogueTM 4 131/2 13
763965 RogueTM 4 131/4 15
Reference
Drawings 763966 RogueTM 4 13 17 Flat Boats and Runabouts
& Info 763967 RogueTM 4 13 19
763968 RogueTM 4 13 21
Part
Number
Index
Alphabetical
Index

Digital Gauges & MWS Propeller Quick Reference Guide

Evinrude
150 - 300 HPEvinrude E-TEC, 25 Models - 90, 115, 130 E-TEC E-TEC G2
Right Left
Hand Hand
Standard Counter
Rotation Rotation
Digital Shift
767620 Aluminum 3 151/2 11 & Throttle
763453 Aluminum 3 151/2 13
765186 Aluminum 3 15 15
General Purpose
765187 Aluminum 3 14 7/8 17
and Economy
765188 Aluminum 3 141/2 19 Digital
Gauges &
765189 Aluminum 3 14.3 21 MWS
763470 Aluminum 3 141/4 23
763959 SSP TBXTM 3 15 5/8 11
Durability and
763960 763961 SSP TBXTM 3 15 5/8 13
General Purpose SystemCheck
763962 763963 SSP TBXTM 3 15 15 Gauges
& MWS
763910 763911 ViperTM TBXTM 3 15 14
763912 763913 ViperTM TBXTM 3 14 3/4 16
763914 763915 ViperTM TBXTM 3 14 3/4 17
Portable
Purpose, Bow 4-Stroke
763920 763921 ViperTM TBXTM 3 14 3/4 20
763922 763923 ViperTM TBXTM 3 14 1/2 21
763924 763925 ViperTM TBXTM 3 14 1/4 22 i-Dock
763936 763937 CycloneTM TBXTM 4 14 1/2 15 Joystick
System
763938 763939 CycloneTM TBXTM 4 14 1/4 17
763940 763941 CycloneTM TBXTM 4 14 1/8 18
Cruising and
763942 763943 CycloneTM TBXTM 4 14 1/8 19
Transom Lift
763944 763945 CycloneTM TBXTM 4 14 20 Rigging
763946 763947 CycloneTM TBXTM 4 14 21 Accessories
763948 763949 CycloneTM TBXTM 4 14 23
763984 763985 Rebel TBXTM 3 15 3/4 15
763986 763987 Rebel TBXTM 3 15 1/2 17
Fuel & Oil
763988 763989 Rebel TBXTM 3 15 3/8 18 Systems
Speeds and
763992 763993 Rebel TBXTM 3 15 1/8 20
Improved Fuel
763996 763997 Rebel TBXTM 3 14 7/8 22
Steering
763998 763999 Rebel TBXTM 3 14 3/4 23
764000 764001 Rebel TBXTM 3 14 1/2 25
177308 Raker H.O. with Variable Vent Ports (no TBXTM Hub) 3 14 1/2 25 and optimize Propellers
177320 177321 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 18 For optimal Oil &
mid-range fuel Engine
177322 177323 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 20 economy, rough Care
inshore, pontoon,
( TBXTM Hub ) 4 15 25 runabouts Reference
177330 Rx4TM with Variable Vent Ports (no TBXTM Hub) 4 15 26 Drawings
& Info
Part
Number
Index
Alphabetical
Index

Propeller Quick Reference Guide Digital Gauges & MWS
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS

E-TEC G2
Digital Shift
Gauges &
Gauges
& MWS
Portable
4-Stroke
SystemCheck Gauges & MWS Rigging Selection Rigging

Accessories
If using a manual process select rigging for Digital Gauges and Displays in the following steps:
1. Select shift and throttle controls in rigging kits or by individual assemblies.

2. Select MWS wire harness and key switch.
3. Select instrument style and type: Tech TM Series, Zephyr TM Series, ConceptTM Series or Retro Series. Fuel & Oil
Systems
4. Select Snap-In HE or Snap-In Classic control cables.
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Network SystemCheck Gauges & MWS
SystemCheck Network
Evinrude With mechanical remote control.
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Control - Concealed Side Mount (CSM)
Control - Concealed Side Mount (CSM)

Standard Features Evinrude
BRP styling and design E-TEC G2
Port or Starboard mounting
Improved throttle and shift control
Easy toggle trim switch
Simplified cable installation
Adjustable throttle friction Digital Shift
Push-Button neutral warm up & Throttle
Start-in-gear prevention
NOT for use with Stern Drive applications
5006561

Digital
5006561 Concealed Side Mount Control 1 Gauges &
MWS
Rigging Kits, SystemCheck Concealed Side Mount (CSM)

Evinrude E-TEC (15HO-300 HP) Kits. These kits provide convenience for ordering and easier inventory management. See description for detail of SystemCheck
kit components. Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
Rigging Kit, SystemCheck, CSM with Oil Tank,15' MWS System
Evinrude E-TEC (115-300 HP) Single Engine Kits.

763847 1 Rigging
Rigging Kit includes: 1.8 gal oil tank (5008617), Key Switch kit (176408), Concealed side mount control (5006561),
15' MWS (176340) Accessories
Rigging Kit, SystemCheck, CSM with Oil Tank, 20' MWS

Evinrude E-TEC (115-300 HP) Single Engine Kits. Fuel & Oil
Systems
763849 Rigging Kit includes: 1.8 gal oil tank (5008617), Key Switch kit (176408), Concealed side mount control (5006561), 1
20' MWS (17634 1)
Steering
Rigging Kit, SystemCheck, CSM with Oil Tank, 28' MWS
763853 Rigging Kit includes: 1.8 gal oil tank (5008617), Key Switch kit (176408), Concealed side mount control (5006561), 1
Propellers
28' MWS (176342)
Rigging Kit, SystemCheck, CSM without Oil Tank, 15' MWS

Evinrude E-TEC (15HO-90 HP) Single Engine Kits. Oil &
Engine
763858 Rigging Kit includes: Key Switch kit (176408), Concealed side mount control (5006561), 15' MWS (176340) 1
Rigging Kit, SystemCheck, CSM without Oil Tank, 20' MWS Reference
Drawings
Evinrude E-TEC (15HO-90 HP) Single Engine Kits. & Info
763860 Rigging Kit includes: Key Switch kit (176408), Concealed side mount control (5006561), 20' MWS (176341) 1
Part
Number
Rigging Kit, SystemCheck, CSM without Oil Tank, 28' MWS Index
Evinrude E-TEC (15HO-90 HP) Single Engine Kits.

Alphabetical
763864 Rigging Kit includes: Key Switch kit (176408), Concealed side mount control (5006561), 28' MWS (176342) 1 Index

Control - Surface Side Mount with Ignition Switch SystemCheck Gauges & MWS
Control - Surface Side Mount with Ignition Switch

Evinrude Single Engine Rigging Kits
E-TEC G2 Standard Features
BRP styling and design
Port or Starboard mounting
1996 and newer engines
Neutral lock
Digital Shift Start-in-gear prevention
& Throttle Adjustable throttle friction
Warning horn included
5006180
Digital P/N Description Pack qty
Gauges &
MWS 5006180 Surface mount control with ignition, trim switch, switch 1
Rigging Kits, SystemCheck Surface Side Mount

SystemCheck
Gauges Evinrude E-TEC (15HO-300 HP) Kits. These kits provide convenience for ordering and easier inventory management. See description for detail of
& MWS kit components.
Portable
4-Stroke
i-Dock
Joystick
System
Rigging Kit, SystemCheck, Surface Mount with Oil Tank, 15' MWS
Rigging
Accessories Evinrude E-TEC (115-300 HP) Single Engine Kits.
763848 Rigging Kit includes: 1.8 gal oil tank (5008617), Surface mount control (5006180), 15' MWS (176340) 1
Fuel & Oil

Systems Rigging Kit, SystemCheck, Surface Mount with Oil Tank, 20' MWS
Steering 763852 Rigging Kit includes: 1.8 gal oil tank (5008617), Surface mount control (5006180), 20' MWS (176341) 1
Rigging Kit, SystemCheck, Surface Mount without Oil Tank, 15' MWS
763859 Rigging Kit includes: Surface mount control (5006180), 15' MWS (176340) 1
Oil &
Rigging Kit, SystemCheck, Surface Mount without Oil Tank, 20' MWS
Engine Evinrude E-TEC (15HO-90 HP) Single Engine Kits.
Care
763863 Rigging Kit includes: Surface mount control (5006180), 20' MWS (176341) 1
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Control - Single Lever Binnacle with Key Switch
Control - Single Lever Binnacle with Key Switch

1996 and Newer engines
Integrated Key Switch and Lanyard
Simplified cable installation Digital Shift
Adjustable throttle friction & Throttle
Push button neutral warm up
Start-in-gear prevention switch
Digital
5006186 Gauges &
MWS
5006186 Single Level Binnacle Control with Key Switch 1
SystemCheck
Gauges
Rigging Kits, SystemCheck Single Binnacle with Key Switch & MWS
Evinrude E-TEC (15HO-300 HP) Kits. These kits provide convenience for ordering and easier inventory management. See description for detail of
kit components.
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Rigging Kit, SystemCheck, Binnacle with Key Switch and with Oil Tank, 20' MWS
Fuel & Oil
763850 Rigging Kit includes: 1.8 gal oil tank (5008617), Single lever binnacle control with key (5006186), 20' MWS (176341) 1 Systems
Rigging Kit, SystemCheck, Binnacle with Key Switch and with Oil Tank, 28' MWS
Steering
763854 Rigging Kit includes: 1.8 gal oil tank (5008617), Single lever binnacle control with key (5006186), 28' MWS (176342) 1
Rigging Kit, SystemCheck, Binnacle with Key Switch without Oil Tank, 20' MWS Propellers
763861 Rigging Kit includes: Single lever binnacle control with key (5006186), 20' MWS (176341) 1
Oil &
Engine
Rigging Kit, SystemCheck, Binnacle with Key Switch without Oil Tank, 28' MWS Care

Reference
763865 Rigging Kit includes: Single lever binnacle control with key (5006186), 28' MWS (176342) 1 Drawings
& Info
Part
Number
Index
Alphabetical
Index

Control - Single Lever Binnacle without Key Switch SystemCheck Gauges & MWS
Control - Single Lever Binnacle without Key Switch

Evinrude Standard Features
E-TEC G2 BRP styling and design
Simplified cable installation
Digital Shift Adjustable throttle friction
& Throttle Push-button neutral warm up
Start-in-gear prevention
Digital
Gauges & 5006182
MWS
5006182 Single Level Binnacle Control without Key Switch 1
SystemCheck
Gauges
& MWS Rigging Kits, SystemCheck Single Lever Binnacle without Key Switch
kit components.
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Rigging Kit, SystemCheck, Binnacle without Key Switch with Oil Tank, 20' MWS
Fuel & Oil
Systems 763851 Rigging Kit includes: 1.8 gal oil tank (5008617), Key Switch kit (176408),Single lever binnacle control without key 1
(5006182), 20' MWS (176341)
Rigging Kit, SystemCheck, Binnacle without Key Switch with Oil Tank, 28' MWS
Steering Evinrude E-TEC (115-300 HP) Single Engine Kits.
763855 Rigging Kit includes: 1.8 gal oil tank (5008617), Key Switch kit (176408),Single lever binnacle control without key 1
(5006182), 28' MWS (176342)
Propellers
Rigging Kit, SystemCheck, Binnacle without Key Switch without Oil Tank, 20' MWS
Oil &
Engine 763862 Rigging Kit includes: Key Switch kit (176408), Single lever binnacle control without key (5006182), 20' MWS (17634 1) 1
Care
Rigging Kit, SystemCheck, Binnacle without Key Switch without Oil Tank, 28' MWS
Reference
Drawings P/N Description Pack qty
& Info
763866 Rigging Kit includes: Key Switch kit (176408), Single lever binnacle control without key (5006182), 28' MWS (176342) 1
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Control - Dual Lever / Dual Engine Binnacle
Control - Dual Lever / Dual Engine Binnacle

Synchronized dual engine trim and individual trim switches
Simplified cable installation Digital Shift
Adjustable throttle friction & Throttle
Push button neutral warm up
Start-in-gear prevention switch
Digital
5006184 Gauges &
MWS
5006184 Dual Lever/ Dual Engine Binnacle Control 1
SystemCheck
Gauges
Rigging Kits, SystemCheck Dual Binnacle & MWS
kit components.
Portable
4-Stroke
i-Dock
Joystick
System
Rigging Kit, SystemCheck, Dual Binnacle with Oil Tank, 20' MWS
Evinrude E-TEC (115-300 HP) Dual Engine Kits. Rigging
Accessories
763856 Rigging Kit includes: 1.8 gal oil tank (5008617), Dual Key Switch kit (176410),Dual lever/Dual Engine binnacle control 1
(5006184), 20' MWS (176341)
Fuel & Oil
Systems
Rigging Kit, SystemCheck, Dual Binnacle with Oil Tank, 28' MWS
Evinrude E-TEC (115-300 HP) Dual Engine Kits.
763857 Rigging Kit includes: 1.8 gal oil tank (5008617), Dual Key Switch kit (176410),Dual lever/Dual Engine binnacle control 1 Steering
(5006184), 28' MWS (176342)
Rigging Kit, SystemCheck, Dual Binnacle without Oil Tank, 20' MWS
Evinrude E-TEC (15HO-90 HP) Dual Engine Kits.
Propellers
763867 Rigging Kit includes: Dual Key Switch kit (176410), Dual lever/Dual Engine binnacle control (5006184), 20' MWS 1
(176341)
Oil &
Engine
Rigging Kit, SystemCheck, Dual Binnacle without Oil Tank, 28' MWS Care
Evinrude E-TEC (15HO-90 HP) Dual Engine Kits.
763868 Rigging Kit includes: Dual Key Switch kit (176410), Dual lever/Dual Engine binnacle control (5006184), 28' MWS 1 Reference
(176342) Drawings
& Info
Part
Number
Index
Alphabetical
Index

Wiring Harness, SystemCheck MWS SystemCheck Gauges & MWS
Wiring Harness, SystemCheck MWS

Evinrude P/N Description Pack qty
E-TEC G2
176339 MWS Wiring Harness - 12' 1

Digital Shift
& Throttle
Extensions Between Harness & Engine - 1996 & Newer

Digital
MWS
176333 Extension between MWS harness and engine - 5' 1
176334 Extension between MWS harness and engine - 10' 1
SystemCheck 176335 Extension between MWS harness and engine - 20' 1

Gauges
& MWS
Extensions Between Harness and Dash - 1996 & Newer
Portable 176715 Key switch extension - 6 wire - 3' 1
4-Stroke
176716 Trim Switch extension - 3 wire - 3' 1
176717 System Check MWS extension - 8 wire - 3' 1
i-Dock 176718 Horn extension - 2 wire - 3' 1

Joystick
System Note: All extensions are 3' long.
Wiring Harness, 1973-1995 Models

Rigging Harness connects engine functions to remote control or key
Accessories
switch kit. Order trim harness separately.
Adapts the round red engine connector to SystemCheck
ignition switch.
18 feet long
Includes warning horn and trim switch adapter.
Fuel & Oil
Systems
Steering
768411 Wiring Kit for 1973-1995 Models - 20' 1
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Key Switch Kit - Single Engine

Connect to main electrical cable when using a control that is not Evinrude
pre-wired. Includes horn and emergency stop switch. E-TEC G2
Digital Shift
& Throttle
176408
Digital
176408 Key Switch Kit 1 Gauges &
MWS
Key Switch Kit - Dual Engine SystemCheck

Gauges
Connect to main electrical cable when using a control that is not & MWS
pre-wired. Includes two horns and emergency stop switch.
Requires two SystemCheck MWS wiring harnesses
Portable
176410 4-Stroke
176410 Dual Key Switch Kit 1
174693 Bezel Kit (bezel and 4 screws) 1 i-Dock

Joystick
System
Ignition Switch with Lanyard
1996 and Newer Models
Rigging
Accessories
Fuel & Oil

Systems
5005801
5005801 Ignition Switch with Lanyard 1 Steering
Keys - 96 Series Key Set

Propellers
176287 96 Series Key Set (includes keys 75, 76, 77, 79) 1
Note: 4 total keys

Oil &
Engine
Keys - 96 Series Individual Care

Reference
127592 Ignition Key 76 1 Drawings
& Info

Part
Number
Index
Alphabetical
Index

Connectors - Trim Y SystemCheck Gauges & MWS
Connectors - Trim Y
Evinrude To provide electrical connections to tap into the trim harness
E-TEC G2 with a second trim switch (i.e. bow mounted trim).
176588
Digital Shift P/N Description Pack qty

& Throttle
Digital
Gauges & Foot Throttle Control - Hot Foot TM
MWS
Marine Foot Throttle makes driving boats fun and safe.
Mounts directly to floor for outboard and inboard engine
applications
Adaptable to all high performance boats
SystemCheck Cast aluminum reduces weight and resists corrosion
Gauges Stainless steel hardware with Teflon and nylon bearing
& MWS
surfaces for trouble free operation
Stainless steel spring returns engine to idle position when
released
Toe clip for additional safety in extreme operating conditions 504281
Portable Provisions for additional return spring if required
4-Stroke Uses standard control cables for easy hook-up
Adjustable Slide Mount allows boaters to adjust the Hot Foot TM
for maximum comfort and adjust to different heights for drivers
(HFM-1)
i-Dock P/N Description Pack qty
Joystick
System 504281 Hot FootTM 1
773619 Adjustable Hot FootTM Slide Mount 1
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Cables - Control (Shift & Throttle)
Cables - Control (Shift & Throttle)

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Selection of Cable Length SystemCheck Gauges & MWS

Evinrude 3300 TFXtreme Portable
E-TEC G2 Evinrude / Johnson SnapIn SnapIn HE (High-Efficiency) Long Life
SAE Control 4Stroke
Shift Throttle Cables Control Cable Assembly Cables
Cable Assembly Cables *
Dealer Pack OEM Pack Dealer Pack OEM Pack Dealer Pack Dealer Pack Dealer Pack
Length
Digital Shift P/N Qty P/N Qty P/N Qty P/N Qty P/N Qty P/N Qty P/N Qty
& Throttle
5' 173105 1
6' 173106 1
Digital 7' 173107 1
Gauges &
MWS 8' 173108 1 176108 1 377368 1
9' 173109 1 176109 1 377369 1
10' 173110 2 176110 1 377370 1
SystemCheck 11' 173111 2 173011 30 176111 1 377371 1
Gauges
& MWS 12' 173112 2 173012 30 176112 1 377372 1
13' 173113 2 173013 30 176113 1 377373 1
14' 173114 2 173014 30 176114 1 377374 1
15' 173115 2 173015 30 764115 1 764215 10 176115 1 377375 1
Portable
4-Stroke 16' 173116 1 173016 30 764116 1 764216 10 176116 1 377376 1
17' 173117 1 173017 30 764117 1 764217 10 176117 1 377377 1
18' 173118 1 173018 30 764118 1 764218 10 176118 1 377378 1
i-Dock 19' 173119 1 173019 30 764119 1 764219 10 176119 1 377379 1
Joystick
System 20' 173120 1 173020 30 764120 1 764220 10 776830 1 176120 1
21' 764121 1 764221 10
22' 173122 1 173022 20 764122 1 764222 10 776831 1 176122 1
23' 764123 1 764223 10
Rigging
Accessories 24' 173124 1 173024 20 764124 1 764224 10 776832 1 176124 1
25' 764125 1 764225 10
26' 173126 1 764126 1 764226 10 776833 1 176126 1
28' 173128** 1 764128 1 776834 1
Fuel & Oil
Systems 30' 173130** 1 764130 1 776835 1
32' 173132** 1 764132 1 776836 1
34' 173134** 1 764134 1 776837 1
36' 173136** 1 764136 1 776838 1
Steering
38' 173138** 1 764138 1 776839 1
40' 173140** 1 764140 1 776840 1
42' 173142** 1 764142 1
44' 173144** 1 764144 1
Propellers
46' 173146** 1 764146 1
48' 173148** 1 764148 1
Oil & 50' 173150** 1 764150 1

Engine
Care
* These cables are designed specifically to fit Evinrude/Johnson remote controls on the input end and standard SAE fittings on the
output end for portable 4strokes.
** Limited availability
Reference
Drawings Selection of Cable Length
& Info
Measure from the inside of the boat, Point A, (desired position of control box) to Point B. Be sure
to include any vertical distance the cable must travel to reach control mounting area. Measure
from Point B to center line of motor location C. As a guideline, it is recommended that the path
with the least number of bends be selected.
Part
Number Outboard
Index
Add 1 m (40) to this measurement. Choose this cable length, or the next longer size, from the
chart. Two cables are required for single motor installations
Alphabetical
Index

SystemCheck Gauges & MWS Cables - Snap-In HE (High Efficiency)
Cables - Snap-In HE (High Efficiency)

Evinrude
E-TEC G2
Digital Shift
& Throttle

Digital
764116 16' Snap-In HE Cable Assembly 1 Gauges &
MWS
764119 19' Snap-In HE Cable Assembly 1 SystemCheck

Gauges
764120 20' Snap-In HE Cable Assembly 1 & MWS

Portable
764123 23' Snap-In HE Cable Assembly 1 4-Stroke
764126 26' Snap-In HE Cable Assembly 1 i-Dock

Joystick
764128 28' Snap-In HE Cable Assembly 1 System

Rigging
764134 34' Snap-In HE Cable Assembly 1 Accessories
764140 40' Snap-In HE Cable Assembly 1 Fuel & Oil

Systems

Steering
764216 16' Snap-In HE Cable Assembly, 10 pack 10 Propellers

764219 19' Snap-In HE Cable Assembly, 10 pack 10 Oil &

Engine
764220 20' Snap-In HE Cable Assembly, 10 pack 10 Care

Reference
764223 23' Snap-In HE Cable Assembly, 10 pack 10 Drawings
& Info
764226 26' Snap-In HE Cable Assembly, 10 pack 10 Part

Number
Index
Alphabetical
Index

Cables - Snap-In Classic SystemCheck Gauges & MWS
Cables - Snap-In Classic

Evinrude
E-TEC G2
Digital Shift
& Throttle

Digital
Gauges & 173107 7' Snap-In Classic Cable Assembly 1
MWS

SystemCheck 173110 10' Snap-In Classic Cable Assembly, 2 pack 2
Gauges
& MWS 173111 11' Snap-In Classic Cable Assembly, 2 pack 2

Portable
4-Stroke 173114 14' Snap-In Classic Cable Assembly, 2 pack 2

i-Dock
Joystick
System 173118 1
18' Snap-In Classic Cable Assembly

Rigging
Accessories 173011 11' Snap-In Classic Cable Assembly, 30 pack 30

Fuel & Oil 173014 14' Snap-In Classic Cable Assembly, 30 pack 30
Systems

Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Tiller Arm Kits, Evinrude E-TEC 15-130 HP
Tiller Arm Kits, Evinrude E-TEC15-130 HP

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
P/N Application Color Starting Touch Troll Pack qty

SystemCheck
5008470 15-30 HP Evinrude E-TEC 2011-thru Blue Push Button - Yes 1
Gauges
Included & MWS
5008471 15-30 HP Evinrude E-TEC 2011-thru White Push Button - Yes 1
Included
5009249 40-50-60 HP Evinrude E-TEC 2004-thru Blue Push No 1

Button/Key Portable
Switch - 4-Stroke
Included
5009251 40-50-60 HP Evinrude E-TEC 2004-thru White Push No 1

Button/Key
Switch - i-Dock
Included Joystick
System
5009234 40-50-60 HP Evinrude E-TEC AGA models-thru (with Blue Push Yes 1
Touch Troll) Button/Key
Switch -
Included
Rigging
5009236 40-50-60 HP Evinrude E-TEC AGA models-thru (with White Push Yes 1
Accessories
Touch Troll) Button/Key
Switch -
Included
5009544 40-50-60 HP Evinrude E-TEC AB models-thru (with Graphite Push Yes 1

Touch Troll) Button/Key Fuel & Oil
Switch - Systems
Included
5009250 75-90 HP Evinrude E-TEC 2004-thru (includes 5007322 Blue Push No 1

friction kit) Button/Key
Switch -
Included
Steering
5009252 75-90 HP Evinrude E-TEC 2004-thru (includes 5007322 White Push No 1
friction kit) Button/Key
Switch -
Included
5009235 65 H.O. and 75-90 HP Evinrude E-TECAFA models-thru Blue Push Yes 1 Propellers
(with Touch Troll) (includes 5007322 friction kit) Button/Key
Switch -
Included
5009237 65 H.O. and 75-90 HP Evinrude E-TECAFA models-thru White Push Yes 1
(with Touch Troll) (includes 5007322 friction kit) Button/Key Oil &
Switch - Engine
Included Care
5009545 60 Jet, 65 H.O. and 75-90 HP Evinrude E-TEC AFA Graphite Push Yes 1
models-thru (with Touch Troll) (includes 5007322 friction kit) Button/Key
Switch -
Included Reference
Drawings
5007557 115-130 HP Evinrude E-TEC 2007-thru Blue Push No 1 & Info
Button/Key
Switch -
Included
5007558 90HO-130 HP Evinrude E-TEC 2007-thru White Push No 1 Part

Button/Key Number
Switch - Index
Included
5009546 105 Jet, 90HO-130 HP Evinrude E-TECAB models-thru Graphite Push No 1

Button/Key
Switch - Alphabetical
Included Index

Gauges - Tech TM Series Instruments SystemCheck Gauges & MWS
Gauges - Tech TM Series Instruments

Evinrude Black dial face, white letters, orange pointer, full-size bezel, fiber optic back-lit with red tint
E-TEC G2 These instruments are built tough, to withstand the rigors of life on the water. Solid-state electronics temperature-resistant plastics
and scratch-resistant glass lenses are engineered into every instrument to ensure a long life of accurate reading. Plus, they feature
perimeter lighting for night reading.
Digital Shift
Gauges - Tech TM Series Tachometers
& Throttle
Digital
Gauges &
MWS
174985
SystemCheck
Gauges 177107 Tach with System Check 3" 1
& MWS
177088 Tach with System Check 3" 24
174985 5, 6, 10 Pulse O/B 3" 1
Portable 174629 2, 3, 4, 6 Pulse S/D 3" 1

4-Stroke
Gauges - Tech TM Series Speedometers

Speedometers - 30 - 90 MPH
i-Dock
Joystick
System
Rigging
Accessories 175310
175310 Speedometers - 30 MPH 3" 1
Fuel & Oil 174818 Speedometers - 50 MPH 3" 1
Systems

Steering
Gauges - Tech TM Series System Check

Propellers
Oil &
Engine
Care 177047
177047 System Check 2" 1
Reference
Drawings 177046 System Check 2" 24
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Gauges - Tech TM Series Fuel Level
Gauges - Tech TM Series Fuel Level

Evinrude
E-TEC G2
Digital Shift
& Throttle
767207
767207 Fuel Level 2" 1
Digital
767203 Fuel Level 2" 24 Gauges &
MWS
172114 Universal Fuel Gauge Sending Unit 1
Gauges - Tech TM Series Voltmeter SystemCheck

Gauges
& MWS
Portable
4-Stroke
767208
767208 Voltmeter 2" 1 i-Dock
Joystick
767204 Voltmeter 2" 24 System
Gauges - Tech TM Series Water Pressure

Rigging
Accessories
Fuel & Oil

Systems
175114
175114 Water Pressure - 30 PSI 2" 1
175149 Water Pressure - 30 PSI 2" 24 Steering
Gauges - Tech TM Series Trim

Propellers
Oil &
Engine
Care
767210
Reference
767210 Trim - Outboard 2" 1 Drawings
& Info
767206 Trim - Outboard 2" 24
Part
Number
Index
Alphabetical
Index

Gauges - Tech TM Series Hourmeter SystemCheck Gauges & MWS
Gauges - Tech TM Series Hourmeter

Evinrude
E-TEC G2
Digital Shift
& Throttle
765439
Digital 765439 Hourmeter - Not Lighted 2" 1

Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Gauges - ConceptTM Series Instruments
Gauges - ConceptTM Series Instruments

White dial face, black letters, perimeter lit, black pointer, short black bezel Evinrude
These instruments are built tough, to withstand the rigors of life on the water. Solid-state electronics temperature-resistant plastics E-TEC G2
Gauges - Concept TM Series Tachometers Digital Shift

& Throttle
Digital
Gauges &
MWS
764017
SystemCheck
764017 Tach with System Check 3" 1 Gauges
& MWS
Gauges - Concept TM Series Speedometers

Portable
Speedometers - 3070 MPH 4-Stroke
i-Dock
Joystick
System
764072
764071 Speedometer - 55 MPH 3" 1 Rigging
Accessories
764085 Speedometer - 55 MPH 3" 24

Fuel & Oil
Systems
Gauges - ConceptTM Series System Check

Steering
Propellers
764073
Oil &
764087 System Check 2" 24 Engine
Care
Gauges - Concept TM Series Fuel Level

Reference
Drawings
& Info
Part
Number
764075 Index
764089 Fuel Level 2" 24 Alphabetical

Index

Gauges - ConceptTM Series Voltmeter SystemCheck Gauges & MWS
Gauges - ConceptTM Series Voltmeter

Evinrude
E-TEC G2
Digital Shift
& Throttle
764074
Digital 764074 Voltmeter 2" 1
Gauges &
MWS 764088 Voltmeter 2" 24
Gauges - ConceptTM Series Water Pressure

SystemCheck
Gauges
& MWS
Portable
4-Stroke
764081
i-Dock 764081 Water Pressure - 30 PSI 2" 1

Joystick
System
Gauges - Concept TM Series Trim
Rigging
Accessories
Fuel & Oil

764076
Systems
Steering
Gauges - ConceptTM Series 2" Plug
764308 2" Plug 1
Propellers
Gauges - Concept TM Series 3" Plug

Oil &
Engine 175622 3" Plug 1
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Gauges - Zephyr TM Series Instruments
Gauges - ZephyrTM Series Instruments

Black dial face, white letters, white pointer, short black bezel Evinrude
These instruments are built tough, to withstand the rigors of life on the water. Solid-state electronics temperature-resistant plastics E-TEC G2
Gauges - ZephyrTM Series Tachometers Digital Shift

& Throttle
Digital
Gauges &
MWS
764018
P/N Description Pack qty SystemCheck
Gauges
764018 Tach with System Check 3" 1 & MWS
Gauges - ZephyrTM Series Speedometers Portable

4-Stroke
Speedometers - 30 - 90 MPH
i-Dock
Joystick
System
764041 Rigging
Accessories

Fuel & Oil
Systems
Gauges - ZephyrTM Series System Check
Steering
764043
Propellers

Oil &
Engine
Care
Gauges - ZephyrTM Series Fuel Level
Reference
Drawings
& Info
764045
Part
P/N Description Pack qty Number
Index
Alphabetical
Index

Gauges - Zephyr TM Series Voltmeter SystemCheck Gauges & MWS
Gauges - ZephyrTM Series Voltmeter

Evinrude
E-TEC G2
Digital Shift
& Throttle
764044
Digital 764044 Voltmeter 2" 1
Gauges &
MWS 764060 Voltmeter 2" 24
Gauges - ZephyrTM Series Water Pressure

SystemCheck
Gauges
& MWS
Portable
4-Stroke
764052
i-Dock
Joystick 764052 1
Water Pressure - 30 PSI 2"
System
Rigging
Gauges - ZephyrTM Series Trim
Accessories
Fuel & Oil

Systems
764046
Steering 764046 Trim - Outboard 2" 1
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Gauges - Retro Series Instruments
Gauges - Retro Series Instruments

Evinrude
Domed fog resistant lens E-TEC G2
Polished stainless steel bezel with white face
Perimeter lighted white dial with black and silver graphics
Black retro style pointer
Gauges - Retro Series Tachometers Digital Shift

& Throttle
Digital
Gauges &
MWS
775794
SystemCheck
P/N Description Dia. Gauges
& MWS
775795 7000 RPM Universal O/B Tachometer 3"
775794 7000 RPM System Check Tachometer 3"
776579 System Check Tachometer International 3"

Portable
4-Stroke
Gauges - Retro Series Speedometers
i-Dock
Joystick
System
Rigging
Accessories
775793
P/N Description Dia.
775791 35 MPH Mechanical Speedometer 3"
Fuel & Oil
775792 60 MPH Mechanical Speedometer 3" Systems
775793 80 MPH Mechanical Speedometer 3"
Gauges - Retro Series System Check

Steering
Propellers
775800
Oil &
P/N Description Dia. Engine
Care
775800 System Check Gauge 2"
Gauges - Retro Series Fuel Level Reference

Drawings
& Info
Part
Number
Index
775797
775797 Fuel Level Gauge 2" Alphabetical
Index
172114 Universal Fuel Gauge Sending Unit

Gauges - Retro Series Voltmeter SystemCheck Gauges & MWS
Gauges - Retro Series Voltmeter

Evinrude
E-TEC G2
Digital Shift
& Throttle
775796
Digital P/N Description Dia.

Gauges &
MWS 775796 10-16Vdc Voltmeter 2"
Gauges - Retro Series Water Pressure

SystemCheck
Gauges
& MWS
Portable
4-Stroke
775799
i-Dock
Joystick 775799 45# Mechanical Water Pressure Gauge 2"
System
Gauges - Retro Series Trim

Rigging
Accessories
Fuel & Oil

Systems
775798
775798 Outboard Trim Gauge 2"
Steering
Gauges - Retro Series Hourmeter
Propellers
Oil &
Engine
Care 776992
776992 Hourmeter 2"
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Gauges - I-CommandTM and ICONTM Gauge
Accessory Rims
Add a custom touch to the Evinrude instruments with these Evinrude
great looking gauge rims. The color selection is sure to make E-TEC G2
Can also be used with analog gauges Digital Shift
& Throttle
Digital
Gauges &
P/N Description Color MWS

SystemCheck
764257 3 3/8" Gauge Rim, aluminum Blue Gauges
& MWS
766356 5" Angled Gauge Rim, aluminum Blue Portable

4-Stroke

i-Dock
766355 31/2" Angled Gauge Rim, aluminum Red Joystick
System
764260 2 1/8" Gauge Rim, aluminum Black Rigging

Accessories

Fuel & Oil
764264 2 1/8" Gauge Rim, aluminum Gold Systems
764267 3 3/8" Gauge Rim, aluminum Chrome Steering

Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Oil Tank Kits without Oil Level Sender SystemCheck Gauges & MWS
Oil Tank Kits without Oil Level Sender

E-TEC G2 hose and primer assembly.
Digital Shift
& Throttle
5008617
Digital 5008617 1.8 Gallon Tank without Oil Level Sender (15' hose) 1
Gauges &
MWS 5008613 3.0 Gallon Tank Kit without Oil Level Sender (25' hose) 1

SystemCheck
Gauges For twin and triple engine installations, direct injection or carbureted. Uses Evinrude/Johnson oil pick up assembly p/n 5008614 - one pickup assembly
& MWS per engine. Installer will be required to drill a third hole for third engine oil pickup.
11.25Hx30.75Lx9W
Oil level sender
Portable Molded fitting for fill and vent hose
4-Stroke Select additional oil level converter kit, I-Command TM
776580
i-Dock
Joystick
Rigging Oil Pick-Up Kits

Accessories
Fuel & Oil
Systems
5008614
Steering
5008614 3 Gallon Tank and 10 Gallon Tank, Oil Pick-up (25' hose) 1
Propellers

Oil &
Engine
Care
Reference
Drawings 176461
& Info

Part 176461 Remote Oil Fill Kit 1
Number
Index 766907 25' Oil Fill Hose to Connect Kit and Tank (not for gasoline) - 11/2" I.D. 1
Alphabetical
Index

SystemCheck Gauges & MWS Hose - Fuel Line-EPA Guidelines

The EPA and CARB have mandated reduced fuel permeation from specific fuel system components. The legislation applies to all marine Evinrude
manufacturers and component suppliers of fuel hoses, primer bulbs and portable fuel tanks. E-TEC G2
The fuel components listed are all EPA and CARB compliant. Digital Shift
& Throttle
Meets USCG B115 spec Digital
Gauges &
MWS
SystemCheck
Gauges
P/N Description Pack qty Length Dia. & MWS
Fuel Primer Bulb Assembly, EPA Compliant Portable

4-Stroke
i-Dock
Joystick
System
5008605
Rigging
5008586 Primer Bulb Assembly for 3/8" I. D. hose (POP) - EPA Compliant 1 Accessories

Bulk fuel line may be shipped in a non-continuous roll. Fuel & Oil
Priced by the foot in multiples of dealer pack quantity Systems
Steering
772564
772564 Fuel Line 25 25' 5/16" ID
Propellers
772565 Fuel Line 50 50' 3/8" ID
772576 USCG A-1 Hose 50 50' 3/8" ID

Oil &
Engine
Filter - Fuel & Water Separator Kit - 25 Micron Care
Use 1/4 male pipe thread fittings (not included) Reference
Drawings
& Info
174176 Part
Number
P/N Description Pack qty Index

Alphabetical
Index

Fitting - Fuel, for Filter/Water Separator SystemCheck Gauges & MWS

Evinrude
E-TEC G2
Digital Shift 778775

& Throttle
778775 Fuel Fitting 1/4" x 5/16" 90 1
Digital
Gauges & Fitting - Fuel, for Filter/Water Separator
MWS
SystemCheck
Gauges
& MWS 778776
Portable
4-Stroke
i-Dock
Joystick 173311
System
Rigging
Accessories Fitting - Fuel, for Filter/Water Separator
173312
Fuel & Oil
Systems P/N Description Pack qty
Steering
Fitting - Fuel
174179
Propellers
Oil & Valve, Anti-Siphon

Engine
Care
173274
Reference
& Info
Part 173275 1/4" Male Pipe Thread to 3/8" Copper Tube 1

Number
Index
Alphabetical
Index

SystemCheck Gauges & MWS Propeller Quick Reference Guide

Evinrude
15H.O.-30 HP Evinrude E-TEC, 2-Stroke E-TEC G2

765048 Aluminum 3 11 9 Digital Shift
& Throttle
765049 Aluminum 3 101/2 11
765135 Aluminum 4 10.2 11
765050 Aluminum 3 10.3 12
765136 Aluminum 4 10.1 12 General Purpose and Economy
Digital
Gauges &
778863 Aluminum 3 10.3 13 MWS
765137 Aluminum 4 10 13
765138 Aluminum 4 10 14
763486 Aluminum 3 10 15
SystemCheck
765139 Aluminum 4 10 15 Gauges
765176 SSP 3 10 11 & MWS
765174 SSP 4 10 11
765177 SSP 3 10 12
765175 SSP 4 10 12 Portable
765178 SSP 3 10 13 4-Stroke
766153 SSP 4 10 13
765179 SSP 3 10 14
765180 SSP 3 10 15
i-Dock
Joystick
40-130 HP Evinrude E-TEC (Excludes 25 Models) System

Rigging
763301 AluminumTM 3 14 11 Accessories
765181 AluminumTM 3 13 3/4 13
765183 AluminumTM 3 131/4 17
765184 AluminumTM 3 13.2 19 Fuel & Oil
Systems
765185 AluminumTM 3 13.2 21
763957 SSP 3 13 3/4 13 Steering
763950 SSP 3 131/2 15

763951 SSP 3 13 1/4 17
763952 SSP 3 13 19
763929 ViperTM 3 13 7/8 15 Propellers
763932 ViperTM 3 13 7/8 21
763953 Raker 3 13 1/2 18 Oil &
763954 Raker 3 13 1/2 20 High Performance Bow Lifter Engine
Care
763956 Raker 3 13 1/2 24
763964 RogueTM 4 131/2 13
763965 RogueTM 4 131/4 15
Reference
763966 RogueTM 4 13 17 Flat Boats and Runabouts Drawings
763967 RogueTM 4 13 19 & Info
763968 RogueTM 4 13 21
Part
Number
Index
Alphabetical
Index

Propeller Quick Reference Guide SystemCheck Gauges & MWS

Evinrude
E-TEC G2
Right Left
Hand Hand
Standard Counter
Rotation Rotation
Digital Shift
763453 Aluminum 3 151/2 13
765186 Aluminum 3 15 15
General Purpose
765187 Aluminum 3 14 7/8 17
and Economy
Gauges &
MWS 765189 Aluminum 3 14.3 21
763470 Aluminum 3 141/4 23
763959 SSP TBXTM 3 15 5/8 11
Durability and
763960 763961 SSP TBXTM 3 15 5/8 13
Gauges 763962 763963 SSP TBXTM 3 15 15
& MWS
763910 763911 ViperTM TBXTM 3 15 14
763912 763913 ViperTM TBXTM 3 14 3/4 16
763914 763915 ViperTM TBXTM 3 14 3/4 17
Portable
763920 763921 ViperTM TBXTM 3 14 3/4 20
763922 763923 ViperTM TBXTM 3 14 1/2 21
System
763938 763939 CycloneTM TBXTM 4 14 1/4 17
763940 763941 CycloneTM TBXTM 4 14 1/8 18
Cruising and
763942 763943 CycloneTM TBXTM 4 14 1/8 19
Transom Lift
763948 763949 CycloneTM TBXTM 4 14 23
763984 763985 Rebel TBXTM 3 15 3/4 15
763986 763987 Rebel TBXTM 3 15 1/2 17
Fuel & Oil
Speeds and
763992 763993 Rebel TBXTM 3 15 1/8 20
Improved Fuel
763996 763997 Rebel TBXTM 3 14 7/8 22
Steering
763998 763999 Rebel TBXTM 3 14 3/4 23
764000 764001 Rebel TBXTM 3 14 1/2 25
inshore, pontoon,
Reference
& Info
Part
Number
Index
Alphabetical
Index

Portable 4-Stroke

E-TEC G2
Digital Shift
Gauges &
Gauges
& MWS
Portable
4-Stroke
Portable 4-Stroke Rigging Selection Rigging

Accessories
If using a manual process, select rigging for Evinrude Portable 4-Stroke outboards in the following steps:
1. Select shift and throttle controls.

2. Select MWS to portable outboard adapter harness.
3. Select key switch. Fuel & Oil
Systems
4. Select MWS harness.
5. Select control cable.
Note: Reference Outboard Parts and Accessories Bulletin 201302P for additional rigging information.
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude Portable Engines-Binnacle Control Portable 4-Stroke
Evinrude Portable Engines-Binnacle Control

Evinrude Follow these steps to rig a Single top mount Binnacle control:
E-TEC G2 Step One: Select binnacle control and adapter wire harness
Step Two: Select key switch kit
Step Three: Select length of MWS SystemCheck harness
Step Four: Select Portable 4-stroke control cable and length
Digital Shift Refer to Parts and Accessories Bulletin 2013-02(P) for more information.
& Throttle
Control - Portable Engine Binnacle
These components are used to rig 2012 and newer 9.8 and 15 hp with binnacle style remote controls
Requires Portable 4-Stroke SAE Control Cables
Digital Select length
Gauges &
MWS
SystemCheck
Gauges
& MWS
766579
Portable
4-Stroke
766578
i-Dock 766578 Single Lever Binnacle Control without Key Switch 1

Joystick
766579 MWS to Portable Outboard adapter harness (required) 1
System

Connect to main electrical cable when using a control that is not
Rigging pre-wired. Includes horn and emergency stop switch.
Accessories
Fuel & Oil

Systems
176408
Steering 176408 Key Switch Kit 1


Oil & 176341 MWS Wiring Harness - 20' 1
Engine
Care 176342 MWS Wiring Harness - 28' 1
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Portable 4-Stroke Cables - Portable 4-Stroke / SAE
Cables - Portable 4-Stroke / SAE

These cables are designed specifically to fit Evinrude and Johnson remote controls on the input end and standard SAE fittings on the out output end Evinrude
for portable 4-strokes. E-TEC G2
Digital Shift
& Throttle

Digital
176108 8' Portable 4-Stroke/SAE Cable Assembly 1 Gauges &
MWS
176109 9' Portable 4-Stroke/SAE Cable Assembly 1
176111 11' Portable 4-Stroke/SAE Cable Assembly 1 SystemCheck

Gauges
176112 12' Portable 4-Stroke/SAE Cable Assembly 1 & MWS

Portable
176115 15' Portable 4-Stroke/SAE Cable Assembly 1 4-Stroke

i-Dock
176118 18' Portable 4-Stroke/SAE Cable Assembly 1 Joystick
System

Rigging
176124 24' Portable 4-Stroke/SAE Cable Assembly 1 Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude Portable Engines-Concealed Side Mount Portable 4-Stroke
Evinrude Portable Engines-Concealed Side Mount

Evinrude Follow these steps to rig a Concealed Side mount control:
E-TEC G2 Step One: Select concealed side mount control and adapter wire harness
Step Two: Select key switch kit
Step Three: Select length of MWS SystemCheck harness
Step Four: Select 3300C SAE style control cable and length
Digital Shift Refer to Parts and Accessories Bulletin 2013-02(P) for more information.
& Throttle
Control - Portable Engine Concealed Side Mount
These components are used to rig 2012 and newer 9.8 and 15 hp with a concealed side mount control.
Requires 3300 Type Control Cables
Digital Select length
Gauges &
MWS
SystemCheck
Gauges
& MWS
766579
Portable
4-Stroke
766926

i-Dock 766926 Concealed Side Mount Control 1
Joystick
System 766579 MWS to Portable Outboard adapter harness (required) 1

Rigging Connect to main electrical cable when using a control that is not
Accessories pre-wired. Includes horn and emergency stop switch.
Fuel & Oil

Systems
176408
Steering 176408 Key Switch Kit 1

Propellers

Oil &
Engine 176341 MWS Wiring Harness - 20' 1
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Portable 4-Stroke Cable Assembly, 3300 Type Control
Cable Assembly, 3300 Type Control

Universal (or 3300/33) type throttle/shift control cables are direct replacements for many boats using aftermarket controls or the following engine makers' Evinrude
controls: Mariner, MerCruiser, Mercury, BMW, Chrysler, Honda, Nissan, Suzuki, Tohatsu, Volvo, Yamaha and others. For twin E-TEC G2
stations and other demanding applications, we recommend TFXtreme.
Digital Shift
& Throttle
777040
P/N Teleflex P/N Description Length

777040 CC17208 3300 Control Cable Assembly 8'
Digital
Gauges &
MWS
SystemCheck
776818 CC17212 3300 Control Cable Assembly 12' Gauges
& MWS

Portable
776822 4-Stroke
CC17216 3300 Control Cable Assembly 16'
i-Dock
776825 CC17219 3300 Control Cable Assembly 19' Joystick
System
776829 CC17224 3300 Control Cable Assembly 24' Rigging

Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Portable 4-Stroke
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

i-Dock Joystick

E-TEC G2
Digital Shift
Gauges &
Gauges
& MWS
Portable
4-Stroke
Evinrude i-Dock Joystick System Rigging

Accessories
NOW, OWNERS OF OFFSHORE CENTER CONSOLES, POWER HIGH PERFORMANCE CRUISERS
AND MULTI-ENGINE PONTOON APPLICATIONS CAN ENJOY THEIR TIME ON THE WATER
WITHOUT THE STRESSES OF PULLING IN FOR FUEL, SQUEEZING INTO A NARROW SLIP OR
LAUNCHING/RETRIEVING AT A BUSY LAUNCH RAMP. Fuel & Oil
Systems
SPEED SENSITIVE POWER ASSIST STEERING With customizable steering effort and response along
with speed-sensitive helm turn ratios, the i-Dock power steering system provides virtually effortless steering
control at all RPM speeds from idle to wide-open throttle. Users can set the lock-to-lock steering ratio
according to boat speed in order to fit their unique needs. Engine alignment, also known as toe-in and toe
out, can be fine tuned to deliver maximum hydrodynamic efficiency. i-Dock supports 3rd party auto-pilot Steering
controls without the expense of additional steering components.
360-DEGREE MANEUVERING AGILITY With fingertip control the operator easily moves the 3 axis joystick
docking control to easily negotiate crowded areas, dock the vessel for tie up and even to load and unload
the boat from a trailer. Rudder position sensors allow twin Evinrude E-TEC engines to be controlled Propellers
independently or in tandem to maneuver the boat sideways, diagonally, forward and backwards, rotate on
its axis or even crab-over sideways to accomplish tricky docking maneuvers. The unique BOOST mode
provides increased docking power in wind and water current. It is so easy.
Oil &
PERFORMANCE FEATURES: Engine
User adjustable speed sensitive helm turn ratios. Care
User adjustable steering resistance and steering response.
Three axis joystick with guided feel and boost mode.
Independently steered engines. Reference
Smart Cylinders with rudder position sensors. Drawings
& Info
Compatible with 3rd party autopilot systems.
On demand hydraulic steering pumps for lower power consumption.
Service valves maintain engine alignment without tie bars.
Part
SAFETY AND RELIABILITY FEATURES: Number
Sealed, waterproof locking cable connections. Index
Designed for harsh marine environments.
Safety-first redundant electronics, hydraulics and fault tolerant networks give peace of mind for reliability
and superior quality.
Alphabetical
Index

Evinrude i-Dock Selection Chart - Evinrude E-TEC G2 i-Dock Joystick
Evinrude i-Dock Selection Chart - Evinrude E-TEC G2

Evinrude Core Pack - Reference Chart ONLY use E-RIG to order parts.
E-TEC G2 SELECT i-Dock CORE PACK
Quantity Part Number Description
1 768506 i-Dock Joystick docking system
Evinrude E-TEC G2 i-Dock core pack includes:
Digital Shift
& Throttle 1 768602 Color Cantrak Display
1 768604 Pump Control Module
Step 2 768603 Hydraulic Steering Pump
1 Document Pack
Digital
1 4 768404 SeaStar EPS Fluid (1) US quart
Gauges & 1 768605 Can Bus Harness, H3, PCM AUX
MWS
2 Device Net CAN Tee, T1 or use 764151 Tee
1 Harness, EPS, H7, 6, Micro-C EXT or use 764161, 6 harness
1 767306 Harness, EPS, H4, 6
SystemCheck
Gauges 1 587314 Network Interface Cable
& MWS
SELECT JOYSTICK ASSEMBLY BASED ON NUMBER OF ENGINES
Part Number Description
Step Quantity
1 767638 Joystick assembly, dual engine
Portable
4-Stroke
2
1 768495 Joystick assembly, triple engine
SELECT CIRCUIT BREAKER KIT

i-Dock
Joystick
Step Quantity Part Number Description
System
3 1 768155
Circuit Breaker kit - 2 of 50 amp circuit breaker and 2 of 7
battery cable. Required per ABYC standards
SELECT STEERING POSITION SENSOR - Select 2 per Boat

Rigging
Accessories Step
4 2 5009215 Steering Position sensor (includes 18 wire harness)
Fuel & Oil

Systems SELECT ONE STEERING HELM STYLE - Single Station
Step 767292 i-Dock Helm, Front Mount
i-Dock Helm, Rear Mount
5 767295
767293 i-Dock Tilt Helm, Sport Plus
Steering
767294 i-Dock Tilt Helm, Classic
SELECT ONE OF EPS H4 HARNESS based on distance between helm and PCM
Propellers 767306 Harness, Helm to PCM, 6, 6 pin, FCI, CM20406

Step 767312 Harness, Helm to PCM, 12, 6 pin, FCI, CM20412
Harness, Helm to PCM, 18, 6 pin, FCI, CM20418
6 767318
767324 Harness, Helm to PCM, 24, 6 pin, FCI, CM20424
767330 Harness, Helm to PCM, 30, 6 pin, FCI, CM20430
Oil &
Engine 767336 Harness, Helm to PCM, 36, 6 pin, FCI, CM20436
Care
Sensor kit 5009215 includes 18 standard length harness. Select 2 extensions if additional length required.
Reference
Step 767289 Extension harness, Steering Position Sensors, 6, CM20906
Drawings 7 767290 Extension harness, Steering Position Sensors, 12, CM20912
& Info
767291 Extension harness, Steering Position Sensors, 18, CM20918
Part
Number
Index
Alphabetical
Index

i-Dock Joystick
SELECT SeaStar Pro Hydraulic steering hoses by required length for each engine. Select 2 of required lengths.
Quantity Part Number Description Evinrude
767408 HO5784 SeaStar Pro Hose kit, (2 hoses per kit), 8 E-TEC G2
767410 HO5710 SeaStar Pro Hose kit, (2 hoses per kit), 10
Step 773184 HO5714 SeaStar Pro Hose kit, (2 hoses per kit), 14
8 773185 HO5716 SeaStar Pro Hose kit, (2 hoses per kit), 16 Digital Shift
& Throttle
767524 HO5724 SeaStar Pro Hose kit, (2 hoses per kit), 24 Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude i-Dock Selection Chart - Evinrude E-TEC i-Dock Joystick
Evinrude i-Dock Selection Chart - Evinrude E-TEC

Evinrude Circuit Breaker and Sensor Pack - Reference Chart ONLY
E-TEC G2
use E-RIG to order parts.
SELECT i-Dock CORE PACK, Circuit Breaker and Sensor Pack

1 767287 i-Dock Joystick docking system
Digital Shift Evinrude E-TEC i-Dock core pack includes:
& Throttle
1 Color Cantrak Display
1 Pump Control Module
Step 2 Hydraulic Steering Pump
1 i-Dock Joystick
Digital
Gauges &
1 1 Document Pack
MWS 4 SeaStar EPS Fluid (1) US quart
1 Can Bus Harness, H3, PCM AUX
2 Device Net CAN Tee, T1
SystemCheck 1 Harness, EPS, H7, 6, Micro-C EXT
Gauges 1 Harness, EPS, H4, 6
& MWS
1 Custom key switch
SELECT JOYSTICK ASSEMBLY BASED ON NUMBER OF ENGINES
Portable Step Quantity Part Number Description
4-Stroke 1 767638 Joystick assembly, dual engine

2
1 768495 Joystick assembly, triple engine
SELECT CIRCUIT BREAKER KIT

i-Dock
Joystick
System Step Quantity Part Number Description
3 1 768155
Circuit Breaker kit - 2 of 60 amp circuit breaker and 2 of 7
battery cable. Required per ABYC standards
Rigging SELECT STEERING POSITION SENSOR - Select 2 per Boat

Accessories
Step Quantity Part Number Description
4 2 767288
SmartCylinder EC5310, Front Mount, with rudder position
sensor, with 18 harness
Fuel & Oil

Systems SELECT ONE STEERING HELM STYLE - Single Station
Step 767292 i-Dock Helm, Front Mount
5 767295
767293
i-Dock Helm, Rear Mount
i-Dock Tilt Helm, Sport Plus
Steering
767294 i-Dock Tilt Helm, Classic
SELECT ONE OF EPS H4 HARNESS based on distance between helm and PCM
Propellers 767306 Harness, Helm to PCM, 6, 6 pin, FCI, CM20406
Step 767312 Harness, Helm to PCM, 12, 6 pin, FCI, CM20412
767318
6 767324
Oil & 767330 Harness, Helm to PCM, 30, 6 pin, FCI, CM20430
Engine 767336 Harness, Helm to PCM, 36, 6 pin, FCI, CM20436
Care
Sensor kit 5009215 includes 18 standard length harness. Select 2 extensions if additional length required.
Reference
Step 767289 Extension harness, Steering Position Sensors, 6, CM20906
Drawings
& Info
7 767290 Extension harness, Steering Position Sensors, 12, CM20912
767291 Extension harness, Steering Position Sensors, 18, CM20918
Part
Number
Index
Alphabetical
Index

i-Dock Joystick Evinrude i-Dock Selection Chart - Evinrude E-TEC
SELECT SeaStar Pro Hydraulic steering hoses by required length for each engine. Select 2 of required lengths.
Quantity Part Number Description Evinrude
767512 SeaStar Pro Bulkhead hose kit, (2 hoses per kit), 12 E-TEC G2
767514 SeaStar Pro Bulkhead hose kit, (2 hoses per kit), 14
Step 767518 SeaStar Pro Bulkhead hose kit, (2 hoses per kit), 18
Digital Shift
8 767520
767522
SeaStar Pro Bulkhead hose kit, (2 hoses per kit), 20
SeaStar Pro Bulkhead hose kit, (2 hoses per kit), 22
& Throttle

Digital
767530 SeaStar Pro Bulkhead hose kit, (2 hoses per kit), 30 Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Evinrude i-Dock Selection Chart - Evinrude E-TEC i-Dock Joystick
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories
Battery Charging Kit - Evinrude E-TEC

115-300 HP - Allows charging of one additional battery per Evinrude
engine. Provides isolated charging of auxiliary battery. E-TEC G2

& Throttle
P/N Engine Year

5006253 115-300 HP Auxiliary Battery Charging Kit (16' long) 2005-thru
Digital
Note: E-TEC only Gauges &
MWS
Hardware - Engine Mounting, 35-300 HP

SystemCheck
318573 31/2" Bolt (see Service Bulletin 2009-01-P) 1 Gauges
& MWS
336676 4 3/4" Bolt (see Service Bulletin 2009-01-P) 1
331578 5" Bolt (see Service Bulletin 2009-01-P) 1
354101 6" Bolt (see Service Bulletin 2009-01-P) 1 Portable

4-Stroke
354104 9" Bolt (see Service Bulletin 2009-01-P) 1 i-Dock

Joystick
320248 Washer - small stainless steel (min hole dia..5232 / max OD 1.133) 5 System
307238 Washer - large aluminum (min hole dia..5232 / max OD 1.758) 5
313623 Nut 4
318272 Square plate 4 Rigging

Accessories
318572 Protective cap 4
318273 Retainer 1
Fuel & Oil

Pro Trim from Teleflex Systems
Pro Trim offers trim or jack plate control at your fingertips with
a column mounted switch that looks great in any cockpit. Best
of all, you can keep your hands on the wheel and concentrate
on your driving. Will fit: SeaStar hydraulic steering, Teleflex
cable steering and most other brands of cable steering.
Order the Y connector for plug & play connections. Steering
Propellers

772022 ProTrim Single 1 Oil &
Engine
772023 ProTrim Dual 1 Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Trim Control - Steering Rigging Accessories
Trim Control - Steering

Evinrude Steering Trim Control unit provides trim control without removing
E-TEC G2 hands from steering wheel.
Place engine trim control at your fingertips for maximum safety
and ease of operation
Enhances control of any high performance boat
Weather proof switch mounts easily to steering wheel
Digital Shift Molded of black plastic with raised white letters
& Throttle T.H. Marine p/n ST-1
Digital
Gauges &
MWS P/N Description Pack qty
504278 Steering Trim Control 1

SystemCheck
Gauges
& MWS Trim Control - Floor Mount
Floor mounted trim control for high performance bass boats.
Mounts in floor of boat under the console
Allows operator to trim engine with foot
Portable Comes pre-wired with wiring instructions to connect it to
4-Stroke existing trim wiring
T.H. Marine p/n HT-1
504280
Joystick
System 504280 Floor Mount Trim Control 1
Rigging Connectors - Trim Y

Accessories
To provide electrical connections to tap into the trim harness
wit h asecond trim switch (i.e. bow mounted trim).
176588
Fuel & Oil
Systems

Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories Trim Plates & Spacers - Remote Control
Trim Plates & Spacers - Remote Control

Cover plates and spacers are available for the current style Evinrude controls. Although the controls are designed to fit a wide variety of Evinrude
boat consoles and applications, you may encounter situations in a repower or service replacement when the new control does not fit the E-TEC G2
old cutout exactly right. These control box cover plates provide a convenient way to cover the screw holes and cutout left from the old
control. They eliminate the need for fiberglass repairs plus are weather and waterproof. These attractively priced spacers are custom
designs for an exact fit from the old control to the new controls and are available in 3 colors.
Digital Shift
Trim Plates - Dual Binnacle & Throttle
Used to cover older dual lever binnacle control cutout hole and fit
to current style dual binnacle control.
Digital
Gauges &
MWS
764232
SystemCheck
764231 Trim plate, dual binnacle, white 1 Gauges
& MWS
764232 Trim plate, dual binnacle, off white 1
764233 Trim plate, dual binnacle, black 1
765073 Wedge Plate, White, 1", dual lever control 1

Portable
765074 Wedge Plate, Off-White, 1", dual lever control 1 4-Stroke
Trim Plates - Single Binnacle with Key

Used to cover cutout hole for older single lever binnacle with key i-Dock
and fit to current style single binnacle with key. Joystick
System
764235 Rigging
Accessories
764234 Trim plate, single binnacle with key, white 1
764235 Trim plate, single binnacle with key, off white 1

Fuel & Oil
764236 Trim plate, single binnacle with key, black 1 Systems
765112 Wedge Plate, White, 1", OMC single lever control 1
765113 Wedge Plate, Off-White, 1 ", OMC single lever control 1
Steering
Trim Plates - Single Binnacle No Key
Used to cover cutout hole for older single lever binnacle, no key
and fit to current style single binnacle no key.
Propellers
764238
764237 Trim plate, single binnacle without key, white 1 Oil &
Engine
764238 Trim plate, single binnacle without key, off white 1 Care
764239 Trim plate, single binnacle without key, black 1
765110 Wedge Plate, White, 1 ", new single lever control 1

Reference
765111 Wedge Plate, Off-White, 1 ", new single lever control 1 Drawings
& Info
Part
Number
Index
Alphabetical
Index

Trim Plates - Concealed Side Mount Rigging Accessories
Trim Plates - Concealed Side Mount

Evinrude Used to cover cutout hole for older concealed side mount and
E-TEC G2
fit to current style concealed side mount.

& Throttle
764240 Trim plate concealed side mount, white 1
764241 Trim plate concealed side mount, off white 1

Digital
Gauges &
764242 Trim plate concealed side mount, black 1
MWS
Spacers - Concealed Side-Mount

SystemCheck Used to increase clearance between bulkhead and control
Gauges handle grip of current style concealed side mount.
& MWS
Portable 764243
4-Stroke
764243 Spacer, 1/2" thick, black 1
i-Dock Note: 5/8 Maximum bulkhead thickness allowed before spacer installation.
Joystick
System Trim Plates, ICON TM
controls.
Rigging
Accessories
Fuel & Oil

Systems

Steering
Propellers 765078 Trim Plate, single binnacle to ICONTM single, off white 1
765079 Trim Plate, dual binnacle to ICONTM dual, white 1
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories Spiral Wrap, Black Polyethylene
Spiral Wrap, Black Polyethylene

Evinrude
UV resistant E-TEC G2
Bundle wires, cables, hoses and tubing firmly
Permits breakouts at any point and is easy to route or reroute
Resists abrasion
Wraps on like tape and can be reused quickly and simply
Digital Shift
& Throttle
504042
P/N Description Pack qty Size
504042 Spiral Wrap 1 1/4" x 100' Digital
Gauges &
504043 Spiral Wrap 1 3/8" x 100' MWS
504044 Spiral Wrap 1 1/2" x 100'
504045 Spiral Wrap 1 3/4" x 100'

SystemCheck
504046 Spiral Wrap 1 1" x 100' Gauges
& MWS
Flex Hose / Braided Sleeve

Light weight, flexible jacketing for bundling and protecting wire, Portable
cable and hoses 4-Stroke
Creates clean, neat appearance and keeps wire, cable and
hoses out of the way
Resistant to most chemicals; will not rot or deteriorate in sun
or salt water i-Dock
Used on current production engines Joystick
Sold by spool only System
P/N Description Spool size Applications

336545 Braided Sleeve 1 1/2" x 72" Oil Lines Rigging
Accessories
508366 Braided Sleeve 1 1/2" x 50' Battery Cables & Control Cables
508365 Braided Sleeve 1" x 50' Fuel Lines
508364 Braided Sleeve 5/8" x 75' Electrical Boat Wiring & Trailer Harness
Fuel & Oil
508363 Braided Sleeve 3/16" x 100' Systems
343912 Braided Sleeve 1 3/4" x 96" for DI
775400 Braided Sleeve 1 3/4" x 50' for DI
Steering
Hose & Flange, Rigging
Propellers
Oil &
Engine
Care
Rigging Hose & Flange

Reference
P/N Description Color Drawings
& Info
770390 Rigging Flange Black
770391 Rigging Flange White
770392 2" Rigging - Hose (50' roll) Black Part

Number
770393 2" Rigging - Hose (50' roll) White Index
Alphabetical
Index

Cable Boot, Motorwell Rigging Accessories
Cable Boot, Motorwell

Evinrude Motorwell boot effectively meets the ABYC standards.
E-TEC G2 Made of vinyl Plastisol, resists oil, gas and salt water
Easily installed, covers holes to 10 cm (4) diameter
Digital Shift
& Throttle 771970
771970 Cable Boot 1
Digital
Gauges &
MWS Cable Boot, Open Motorwell
The first truly functional cable boot. Eliminates the need to split
or cut your motor well boot to pass cables through. Provides a
fully open area to pass wiring and cables through, when rigging
SystemCheck is complete simply pull cable tie snug around wires and cable
Gauges to complete installation.
& MWS Easy to install
Constructed of rugged black vinyl that resists ultraviolet rays,
gasoline and oil
Available in two sizes to cover all installation requirements
504300
Portable
4-Stroke
504300 3" Motor Well Cable Boot 1
i-Dock 504301 4 1/2" Motor Well Cable Boot 1

Joystick
System
Hose, Split Conduit
Flame retardant cable/wire harness cover
Split for easy access to route wires
Rigging Polyethylene
Accessories
Fuel & Oil

Systems 503956
503956 1/2" ID X 50' Roll 1
Steering 503955 3/4" ID X 50' Roll 1
503957 1 1/2" ID X 50' Roll 1
Cables - Battery with Terminals

Propellers The Evinrude/Johnson battery cable product line has
been developed using a thermoplastic elastomer (TPE) jacket
compound versus the standard PVC insulation.
Thermal range - 55 C to 105 C
Enhanced flexibility
Oil & Higher resistance to fuels, oils and abrasion
Engine
Care
585076
Reference
Drawings P/N Description Horsepower Gauge Length
& Info
585076 Cable Assembly 9.9-15 10 100"
585069 Cable Assembly 10 SEL 10 144"
Part 584381 Cable Assembly 20-70 6 100"

Number
Index 584349 20" Models, Cable Assembly 115-300 4 91"
584348 25" Models, Cable Assembly 115-300 4 124"
Alphabetical
Index

Rigging Accessories Cable Connector - PowerPost High Amperage
Cable Connector - PowerPost High Amperage

PowerPost high amperage cable connectors. Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
770389 PowerPost 3/8" Red 1
770388 PowerPost 5/16" Black 1 SystemCheck

Gauges
& MWS
Battery Terminals - Evinrude/Johnson (Marine Grade)
No-lead, tin-plated copper alloy, positive and negative battery
terminals with stainless steel battery cable attachment bolts. (1
pair) Portable
4-Stroke
i-Dock
Joystick
System
385407

385407 Evinrude/Johnson Battery Terminals (Marine Grade) (POP) 1 Rigging
Accessories
Battery Cable, Evinrude/Johnson TPE Bulk Single Lead

Priced by the foot Fuel & Oil
Systems
Steering
763647
763647 2GA Battery Cable 50' Spool - red 50 Propellers
763648 2GA Battery Cable 50' Spool - black 50
763645 4GA Battery Cable 50' Spool - red 50
763646 4GA Battery Cable 50' Spool - black 50 Oil &

Engine
763649 6GA Battery Cable 50' Spool - red 50 Care
763650 6GA Battery Cable 50' Spool - black 50
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Cable Lugs, Tin Plated Battery Rigging Accessories
Cable Lugs, Tin Plated Battery

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS 502346
502346 2GA Battery Cable Lugs 25 2 (3/8" hole)
SystemCheck
Gauges 502347 4GA Battery Cable Lugs 25 4 (3/8" hole)
& MWS
502349 6GA Battery Cable Lugs (25 pack) 25 6 (3/8" hole)
502348 6GA Battery Cable Lugs 25 6 (1/4" hole)
502350 8GA Battery Cable Lugs 25 8

Portable
4-Stroke
Crimper, HD Battery Terminal
Crimping tool is specifically designed to crimp large, heavy duty
cable terminals.
i-Dock
Joystick Extra clearance for flanged or odd configuration terminals
System Deep throat for easy insertion of the terminal on the cable end
Wide base for added stability
Easily read crimp-depth scales on both sides of the punch
Rigging
Accessories 502224
P/N
Description
Pack qty
Fuel & Oil
Systems Shears, Copper Cable
Power-grip, heavy duty wire and cable cutting shears are
designed to cut virtua l l y all copper battery cable. Power
engineered design transfers maximum cutting action with
minimum cutting effort allowing an easy cut of 2/0 gauge cable.
Steering Blades are knife-edged for smooth, effortless cutting and heat
treated for long, dependable operation
502226
Propellers 502226 Copper Cable Shears 1
Heat Gun
The easy-to-use heat gun offers variable temperature control
that allows the user to dial in any temperature from ambient to
Oil & 1050 F (565 C).
Engine
Care
Airflow rating is 15 CFM at 3650 FPM
Thermostatic control maintains the pre-selected temperature
and prevents heat back-up or overheating when airflow is
restricted
Reference
Drawings
Supervisor temperature lock-in feature allows pre-setting
& Info of temperature and sealing of access opening to assure
compliance with pre-set temperature 502929
Part 502929 Heat Gun 1
Number
Index 502928 Shrink Attachment for Use with Connectors and Terminals 1
Heat Shrink Tubing

Multiple wall polyolefin tubing with meltable inner wall. Tubing durable moisture-proof seal, resistant to salt and other corrosive
Alphabetical comes in a variety of sizes to fit from 22 gauge to 2/0 gauge compounds.
Index wire. By heating the tubing it adheres to the wire giving a tight,
All tubing comes in 6 lengths

Rigging Accessories Black Neoprene Dip
1. Choose the proper size tubing to fit the wire size

2. Slide the tubing over area desired to seal
3. Apply heat with heat gun or some other heating device until Evinrude
E-TEC G2
tubing recovers and the adhesive flows
Digital Shift
& Throttle
502518
P/N Min Exp Max Exp Wire Range Color Pack qty
Digital
ID ID
Gauges &
MWS
502523 3/16" (.188) 0.045 22-18 Red 10
502522 1/4" (.250) 0.07 16-14 Blue 10
502521 5/16" (.313) 0.1 12-10 Yellow 10 SystemCheck

Gauges
502519 3/8" (.375) 0.135 8-6 Black 5 & MWS
502518 1/2" (.500) 0.195 6-4 Black 5
502520 3/4" (.750) 0.313 2-2/O Black 5

Portable
4-Stroke
Black Neoprene Dip
A 5 ounce can of liquid neoprene. When applied to electrical
terminals it will provide superior protection from corrosion.
i-Dock
Used in production on terminal board and remote control Joystick
electrical terminals System
Useful for protecting other electrical terminals where corrosion
has been a problem
Rigging
909570 Accessories

909570 Black Neoprene Dip 5 ounces 1
Fuel & Oil
Systems
Hole Saws
Hole saws for instruments.
Steering
Propellers
Hole saws
172877 2 1/8" Hole for all 2" Instruments 1 Oil &
Engine
172878 3 3/8" Hole for all 3" Flush-Mount Instruments 1 Care
173550 2 1/2" Hole for Concealed Side-Mount Controls 1
172879 Drive Arbor 1

Reference
Drawings
Lifting Eye & Info
Part
342672 Number
Index
354717 15-30 HP 1
396748 40-300 HP (except 60) - see Service Bulletin 2222 1 Alphabetical

Index
342672 60 V4 V6 1

Drill Fixture, Engine Mounting Rigging Accessories
Drill Fixture, Engine Mounting

Evinrude For 35-300 hp outboards. Cast fixture with case hardened drill
E-TEC G2 guides.
Digital Shift
& Throttle
434367
434367 Drill Fixture 1
Digital
Gauges &
MWS
Evinrude E-TEC G2 Engine Lift Ring
Use to lift and install the outboard, refer to the Evinrude
E-TEC G2 Installation & Predelivery Guide .
SystemCheck Also use to remove and install powerhead, refer to the correct
Gauges service manual.
& MWS
357667
Portable
4-Stroke P/N Description Pack qty
357667 Engine Lift Ring - G2 1
i-Dock Evinrude E-TEC G2 Steering Lock Tool

Joystick
System Use to assist bleeding of hydraulic steering and power steering
system.
Rigging
Accessories
Fuel & Oil 357717

Systems
357717 Steering Lock Tool - G2 1
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories 2-Stroke Diagnostics
2-Stroke Diagnostics
Evinrude
Computer requirements for diagnostic software: E-TEC G2
IBM compatible type: battery powered laptop / portable
computer
Windows operating system: 95, 98, 2000, XP, 05, 07 or 08.
Processor: Pentium 133 Mhz or higher
RAM memory: 64 MB or higher (128 MB preferred) Digital Shift
Hard drive capacity: 20 MG free space for installation & Throttle
Display resolution: 800 x 600 minimum
CD-ROM drive or 3.5 inch floppy drive (add-on external floppy
drives available)
RS-232 / 9 pin serial port connectors (add-on USB to serial 5008689
adapters available) Digital
Gauges &
5008689 Evinrude Diagnostic Software 5.0 (Windows based) 1
437955 Evinrude Diagnostic Interface Cable (2-Stroke) - computer serial port to O/B communications connector (12' - 9 pin) 1
SystemCheck
5005388 Diagnostic Software 1.42 (DOS) 3.5 inch floppy diskette (DI and Ficht) 1 Gauges
& MWS
5000901 Bootstrap tool - use during program upgrades (see Service Bulletin 2359) 1
4-Stroke Diagnostics Portable

Computer requirements for diagnostic software: 4-Stroke
IBM compatible type: battery powered laptop / portable
computer
Windows operating system: 95, 98, 2000 or XP
RAM memory: 64 MB or higher (128 MB preferred) i-Dock
Joystick
Hard drive capacity: 20 MG free space for installation System
CD-ROM drive
RS-232 / 9 pin serial port connectors (add-on USB to serial
adapters available)
5033251
Rigging
P/N Description Pack qty Accessories
5033251 Diagnostic Software (Windows based) 1
787053 Interface Cable (4-Stroke) 1

Fuel & Oil
Systems
Evinrude E-TEC G2 Diagnostics
Use the Evinrude diagnostics to communicate with the EMM
of Evinrude E-TEC G2 outboards and ICON TM II remote
controls.
Computer requirements for diagnostic software:
IBM compatible type: battery powered laptop / portable Steering
computer
Windows operating system: 95, 98, 2000 or XP
RAM memory: 64 MB or higher (128 MB preferred)
Hard drive capacity: 20 MG free space for installation
Propellers
CD-ROM drive
RS-232 / 9 pin serial port connectors (add-on USB to serial
adapters available) 5009631
P/N Description Pack qty Oil &

Engine
5009631 Diagnostics Software (G2 version 6.1) 1 Care
USB to Serial Adapter

Use with interface cable P/N 437955, and computer that does Reference
not have serial port connection. Drawings
& Info
Part
Number
Index
587214
Index
587214 USB to Serial Adapter 1

ICON Data Link Kit Rigging Accessories
ICON Data Link Kit

Evinrude Used with Evinrude E-TEC G2 diagnostics to communicate
E-TEC G2 with the engine.
Digital Shift
& Throttle
766690
Gauges &
MWS 766690 ICON Data Link Kit 1
ICON TM Diagnostic Cable

SystemCheck
Use theICON TM DataLink tool, p/n 766690, to connect to a NMEA
Gauges
2000 network and communicate with the EMM of Evinrude
& MWS E-TEC G2 outboards and ICON TM II remote controls.
Portable
4-Stroke
i-Dock
Joystick 767431
System
767431 Diagnostic Cable - G2 1
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories Tie Strap, Fuel Hose
Tie Strap, Fuel Hose

P/N 320107 is ramped and can be used on hoses Evinrude
E-TEC G2
320107
320107 Tie Strap - Ramped 100 Digital Shift
& Throttle
Tie Strap, Standard
Digital
500080 Gauges &
MWS
P/N Min. Max Approx. Approx. Pack qty Color
Tensile Bundle Length Width
Unlocking Diameter
Strength SystemCheck
Gauges
500080 18lbs 7/8" 4" .10" 100 Natural & MWS
317893 18lbs 7/8" 4" .10" 100 Black
318322 30lbs 11/4" 51/2" .14" 100 Natural
500060 30lbs 11/4" 6" .14" 100 Black Portable

4-Stroke
500101 50lbs 13/4" 71/4" .18" 100 Natural
500055 50lbs 3" 113/4" .18" 100 Natural
500081 50lbs 3" 113/4" .18" 100 Black i-Dock

Joystick
500082 50lbs 4" 151/2" .18" 100 Natural System
500083 50lbs 4" 151/2" .18" 100 Black
Tie Strap, Heavy Duty Lashing Rigging

Accessories
500056
Systems
500056 Tie Strap 50
500084 Tie Strap 50
Tie Strap, Mounting (without screw) Steering
One-piece, all plastic ties for quick, simple cable mounting.
Bundling and mounting are done with one unit

500085
Propellers
P/N Mounting Min. Max Approx. Pack qty Color
Tensile Bundle Length
Unlocking Diameter
Strength
500085 50lbs 13/4" 81/2" 100 Natural Oil &
Engine
500086 50lbs 13/4" 81/2" 100 Black Care
500087 50lbs 4" 16" 100 Natural
500088 50lbs 4" 16" 100 Black

Reference
500090 120lbs 4" 161/4" 50 Black Drawings
& Info
Part
Number
Index
Alphabetical
Index

Tie Strap, Mounting (with screw) Rigging Accessories
Tie Strap, Mounting (with screw)

Evinrude Pre-assembled with stainless steel screws.
E-TEC G2
Easier to install, screw will not fall out
Plastic washer helps seal out moisture
Reduced scrap from fewer lost screws
Saves money
Digital Shift #10 stainless steel Phillips pan head screw and retaining
& Throttle washer
Unlocking tensile strength
776708
P/N Mounting Min. Max Approx. Pack qty Color
Digital
Gauges &
Tensile Bundle Length
MWS Unlocking Diameter
Strength
776708 50lbs 8" 100 Black
SystemCheck 776709 50lbs 151/2" 100 Black

Gauges
& MWS
Tie Strap Installation Tools
Use these tools anywhere a plastic tie strap is required. Ratchet
pulls strap to specified tightness and cuts off excess.
Portable
4-Stroke
i-Dock
Joystick
System 509786
323716 Tie Strap Gun - Good 1
Rigging
Accessories 509785 Tie Strap Gun - Better 1
509786 Tie Strap Gun - Best 1
Fuel & Oil

Cable Tie Mounting Base (4-Way)
Systems The rubber-based adhesive backing on these mounts has a
tensile strength of six pounds per square inch. This rating applies
in temperatures from -50 F (-45 C) to 180 F (82 C).
For all standard tie straps

For best performance, mounts should be applied to a smooth,
Steering clean, dry, and oil-free surface 500091
U.L. recognized
500058 Mounting Base 25 1" x 1"
Propellers 500059 Mounting Base 25 1" x 1"
Deutsch Electrical Connector Repair Kit

This handy kit contains everything you need to service the new
Oil & connectors on outboards and SystemCheck accessories. The
Engine durable metal case has a reference chart to make restocking
Care easy.
Reference
Drawings
& Info
Part
Number
Index
507197
Alphabetical 507197 Deutsch Electrical Connector Repair Kit 1
Index
507198 Box Only 1

Rigging Accessories Deutsch Connector Components, Plugs
Deutsch Connector Components, Plugs

Original equipment connector for Evinrude/Johnson wire Evinrude
harness 1 9 9 6 thru. E-TEC G2
Digital Shift
Plug & Throttle

176295 Plug (male), 2 wire 1
Digital
514685 Plug (male), 3 wire 1 Gauges &
MWS
176296 Plug (male), 8 wire 1 SystemCheck

Gauges
127287 Plug Lock Wedge, 2 wire 1 & MWS
514681 Plug Lock Wedge, 3 wire 1

Portable
514683 Plug Lock Wedge, 6 wire 1 4-Stroke
Deutsch Connector Components, Receptacles i-Dock

Joystick
Original equipment connector for Evinrude/Johnson wire System
harness 1 9 9 6 thru.
Rigging
Accessories
Receptacle
514696 Receptacle (female), 2 wire 1
Fuel & Oil
514686 Receptacle (female), 3 wire 1 Systems

Steering
514697 Receptacle Lock Wedge, 2 wire 1
514684 Receptacle Lock Wedge, 6 wire 1 Propellers
Deutsch Connector Components, Accessories Oil &

Engine
Original equipment connector for Evinrude/Johnson wire Care
harness 1 9 9 6 thru.
514679 Pin, 10 pack 10 Reference
Drawings
514680 Socket, 10 pack 10 & Info
Part
Number
Index
Alphabetical
Index

Wiring Harness Connector Dielectric Grease Rigging Accessories
Wiring Harness Connector Dielectric Grease

Evinrude Proven for marine, automotive and truck applications. Superior
E-TEC G2 connector lubricant/sealant based upon synthetic hydrocarbon
base oils.
Oxidation resistant 503243
Proven salt water soak/spray resistance
Prevents corrosion of terminals
Digital Shift Reduces insertion forces
& Throttle Packaged in easy-to-use syringe dispensers or 4 oz. squeeze
tube
Digital 503243 Wire Harness Connector Dielectric Grease, 30cc Syringe 1

Gauges &
MWS 504824 Wire Harness Connector Dielectric Grease, 4 oz Tube (POP) 1
Insulated Crimp Connectors Kit

SystemCheck
Gauges (1) 21- compartment metal kit
& MWS (1) crimp tool P/N 500906
1,000 insulated terminals
20 different kinds of terminals
Portable
4-Stroke
i-Dock
Joystick
System
502552
Rigging 502552 Insulated Crimp Connectors Kit 1
Accessories
Terminal Kit
(1) crimp tool P/N 500906
Fuel & Oil
Systems 120 insulated terminals
12 different kinds of terminals
Steering
Propellers
502551
502551 Terminal Kit 1
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories Wire - Primary, Tinned
Wire - Primary, Tinned

Recommended by the American Boating and Yacht Council and Evinrude
the U.S. Coast Guard for marine applications where exposure E-TEC G2
to salt water spray is inherent, tinned copper wire offers the
optimum protection against corrosion.
105 C thermoplastic wire and conforms to SAE standard

J-1128 and federal regulations 33 CFR 183 subpart 1. Digital Shift
& Throttle
P/N Description Color Digital

Gauges &
770699 8 Gauge 100' Spool Black MWS
770701 8 Gauge 100' Spool Red
770708 10 Gauge 100' Spool Black

SystemCheck
770710 10 Gauge 100' Spool Red Gauges
& MWS
770733 14 Gauge 100' Spool White Portable

4-Stroke
770748 16 Gauge 100' Spool White

i-Dock
770749 16 Gauge 100' Spool Black Joystick
System
770752 16 Gauge 100' Spool Blue
770753 16 Gauge 100' Spool Yellow Rigging

Accessories
770754 16 Gauge 100' Spool Brown
770755 16 Gauge 100' Spool Grey
770757 16 Gauge 100' Spool Purple

Fuel & Oil
770758 16 Gauge 100' Spool Pink Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Wire - Primary, Untinned Rigging Accessories
Wire - Primary, Untinned

Evinrude 105 C general purpose thermoplastic wire conforms to SAE
E-TEC G2 standard J-1128 and federal regulations 33 CFR 183 subpart 1,
the mandatory regulations for wiring used on inboard and stern
drive low voltage ( less than 50 volts) electrical systems for fresh
water.
Also meets all low voltage requirements for outboards

Digital Shift
& Throttle
Digital P/N Description Color

Gauges &
MWS 502271 8 Gauge 100' Spool Black

SystemCheck
Gauges 502288 10 Gauge 100' Spool Red
& MWS
502289 10 Gauge 100' Spool Yellow
Portable 502301 12 Gauge 100' Spool Red

4-Stroke

i-Dock
Joystick 502315 14 Gauge 100' Spool Red
System
502312 14 Gauge 100' Spool Blue
Rigging 502313 14 Gauge 100' Spool Brown

Accessories
502318 14 Gauge 100' Spool Orange

Fuel & Oil
Systems 502325 16 Gauge 100' Spool Black
502324 16 Gauge 100' Spool Green
Steering 502326 16 Gauge 100' Spool Blue
502327 16 Gauge 100' Spool Brown

Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories Hose, Water Pressure & Speedometer
Hose, Water Pressure & Speedometer

Evinrude
E-TEC G2
Digital Shift
& Throttle
121829
Digital
Gauges &
121829 Water Pressure and Speedometer Hose, 23' 1
SystemCheck
Connecting Kit, Water Pressure Gauge Gauges
Used to connect water pressure gauge to outboards. & MWS
Portable
4-Stroke
175740
175740 Water Pressure Gauge Connecting Kit (2-Stroke applications) 1 i-Dock
Joystick
5033833 Water Pressure Gauge Connecting Kit (4-Stroke 25-140HP) 1 System
Bezel, Gauge
Square aircraft styling for 2 and 3 instruments and rectangular Rigging
styling for 2 instruments. Accessories
Fuel & Oil

Systems
174656
Steering
174658 Rectangular Aircraft Style Bezel for 2" Gauges 1
174656 Square Aircraft Style Bezel for 2" Gauges 1
Bezel - Hot Horn Dash Propellers
Oil &
Engine
Care
174970
174970 Hot Horn Dash Bezel 1
Reference
Drawings
& Info
Bezel - Key Switch, Dual Engine
Ignition switch bezel only. Does not include key switches or an
emergency stop switch/lanyard.
Part
Number
Index
174646
Description Alphabetical
P/N Pack qty Index
174646 Dual Switch, Bezel 1

Bezel - Key Switch, Dual Engine with Common Cut-off Rigging Accessories
Bezel - Key Switch, Dual Engine with Common Cut-off

Evinrude Provides ignition switches and emergency ignition cut-off switch
E-TEC G2 bezel only. (For dual outboards). Does not include key switch or
an emergency stop switch/lanyard.
Digital Shift
& Throttle 174693
Digital
Gauges &
MWS
Transom Guard, Speedometer Hose
For speedometer pick-up hose.
SystemCheck
Gauges
& MWS
121828
Portable P/N Description Pack qty
4-Stroke
121828 Transom Guard 1
i-Dock Pitot Tube - Replacement Kit

Joystick Includes 3 screws and transom mounted pick-up assembly.
System Does not include hose.
Use with hose 121829 or 126398.
Rigging
Accessories 173623
173623 Replacement Pitot Tube Kit - single pack 1
Fuel & Oil
Systems 175238 Replacement Pitot Tube Kit - 24 pack 24
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Rigging Accessories Trim and Tilt Motor Bracket Model 55, Panther TM Marine
Trim and Tilt Motor Bracket Model 55, Panther TM Marine

The compact Trim and Tilt Model 55 conveniently matches Evinrude
outboards from 15 to 55 HP, weighing up to 250 pounds. E-TEC G2
Perfectly designed for pontoons, fishing or pleasure boats.

& Throttle
P/N
Description
Pack qty
Digital
Trim and Tilt Motor Bracket Model 135, Panther TM Marine Gauges &
The model 135 is the perfect option for older outboard motors MWS
with bad h y d r a u l i c t r i m a n d t i l t s . T h e h e a v y d u t y b r a c k e t i s
d e s i g n e d f o r outboards up to 135 HP or 350 pounds.
Adapts to clamp on or bolt-through outboards
SystemCheck
Gauges
& MWS
778745
P/N
Description
Pack qty Portable
4-Stroke
Pro Strap Kicker Tie Down Motor Bracket, Panther TM Marine
The Panther TM Pro-Strap provides hands-free, heavy duty
retention for the Model 35.
Adjustable buckles and stainless clevis are included i-Dock
For TNT model 55-0035 and 55-0350 only Joystick
System
778763
P/N
Description
Pack qty Rigging
Accessories
Static Motor Mount Plate Model 405, Panther TM Marine

If trolling motors are your thing - then the 405 static plate is a
must. the Panther TM static motor mount plate provides a flat
secure mounting surface for clamp on or bolt on kicker motors Fuel & Oil
up to 40 HP or 150 pounds. Systems
778765
Steering
778765 Static Motor Mount Plate Model 405 1
Transom Wedges Propellers
Construction allows for full, positive contact between engine

bracket and transom
Fit newer model Evinrude/Johnson and Mercury engines,
bolt-on engines with factory installed tilt and trim Oil &
504311 Engine
Cast aluminum Care
T.H. Marine p/n TW-2

504311 Transom Wedges 1 Reference
Drawings
& Info
Motor Lift, Auxiliary, PantherTM Marine
The heavy duty bracket easily handles auxiliary outboards up to
40 HP or 150 pounds. Ideal for inboards, I/Os, jet-drives and Part
outboards when over the transom mounting is unavailable.
Number
Use of Pro Strap Kicker Tie Down is recommended Index
778742 fits Triton boats and others (Mfg PN 55-0035)
778743 fits Ranger boats and Lund Pro V boats (Mfg PN
55-0350)
778742
P/N Alphabetical
Index
Description
Pack qty

Static Plate, Bobs Machine Rigging Accessories
Static Plate, Bobs Machine

Evinrude Auxiliary engine mount plate
E-TEC G2
Use to install auxiliary kicker engine to transom of multi-species
type fishing boats.
Recommended for 15H.O., 25 and 30 HP Evinrude E-TEC
Up to 183 lbs.
Digital Shift Includes engine mounting hardware to secure engine to the
& Throttle plate.
DOES NOT include hardware to secure plate to the boat.
765459
Digital
MWS
765459 Bobs Machine Static Plate 1
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Fuel & Oil Systems
Oil Tank Kit - Pontoon Series

This kit is designed to fit 40, 50, 60, 60 H.O., 75 and 90 HP Evinrude
outboards 2010 F suffix and newer models (20 and 25 shaft E-TEC G2
length) with a remote oil tank.
Model Year P/N
40, 50, 60 2010 F Suffix -thru 768407
Digital Shift
60 H.O., 75, 90 2010 F Suffix -thru 767511 & Throttle
FEATURES:
Automatic refill of outboard-mounted oil tanks
Electrically operated by the low-oil signal in the engine oil tank Digital
1.8 (6.81L) gallons of additional oil capacity Gauges &
MWS
Removing the engine cover is no longer required to refill the
tank
Simple installation
The Evinrude E-TEC pontoon series remote oil tank kit SystemCheck
Gauges
includes: & MWS
1.8 gal (6.81L) oil tank and pump assembly
20 ft. SystemCheck interface wire harness 767511
Battery power harness
All outboard oil tank conversion parts
Portable
P/N Description Pack qty 4-Stroke

i-Dock
Joystick
Oil Tank Kits without Oil Level Sender System
Oil tank kits come complete with mounting hardware, oil supply
hose and primer assembly.
Rigging
Accessories
5008617
Fuel & Oil
5008617 1.8 Gallon Tank without Oil Level Sender (15' hose) 1
5008613 3.0 Gallon Tank Kit without Oil Level Sender (25' hose) 1
Steering
Oil Level Converter Kits with Sender, I-Command TM
10 gallon oil tank.
Propellers
764271
Oil &
Description Pack qty Engine
P/N
Care

Reference
764273 Oil Level Converter Kit - Dual Engine (1.8 gallons) 1 Drawings
& Info
764275 Oil Level Converter Kit - Triple Engine (3.0 gallons) 1
763737 Oil Level Converter Kit - 10 Gallon Tank 1 Part

Number
Index
Alphabetical
Index

Oil Tank Kits with Oil Level Sender Fuel & Oil Systems

E-TEC G2 hose, primer assembly, and installed oil level sender.

Digital Shift
& Throttle Requires additional oil level converter
5008619
Digital 5008619 1.8 Gallon Tank with Sender (15' hose) 1
Gauges &
MWS 5008615 3 Gallon Tank Kit with Sender (25' hose) 1
Oil Level Converter Kits, I-Command TM

SystemCheck
Used to convert oil level sender signal to NMEA 2000 oil level
Gauges signal. Available for 1.8 gallon, 3.0 gallon or 10 gallon oil tanks
& MWS
tees
Portable
4-Stroke 765311
765311 Oil Level Signal Converter Kit, single tank - includes 1 signal converter for 1 oil tank 1
i-Dock
Joystick 765312 Oil Level Signal Converter Kit, twin tanks - includes 2 signal converters for 2 oil tanks 1
System
Mounting Hardware - 1.8 Gallon Tank Replacement

Rigging
Accessories For 1.8 gallon tank.
862 Replacement Mounting Hardware 1
Fuel & Oil

Systems Oil Pick-Up Kits
Steering
5008614
5008614 3 Gallon Tank and 10 Gallon Tank, Oil Pick-up (25' hose) 1

Oil &
Engine
Care Oil Tank Assembly - 10 Gallon
For twin and triple engine installations, direct injection or carbureted. Uses Evinrude/Johnson oil pick up assembly p/n 5008614 - one pickup assembly
per engine. Installer will be required to drill a third hole for third engine oil pickup.
Reference 11.25Hx30.75Lx9W
Drawings Two holes drilled for twin pickups
& Info Oil level sender
Molded fitting for fill and vent hose
Select additional oil level converter kit, I-Command TM
Part 776580
Number
Index Warranty to be provided by Rabud TM .

Alphabetical
Index

Fuel & Oil Systems Oil Fill Kit, Remote

Evinrude
Mounts on deck for remote filling of oil injection tank. E-TEC G2
Digital Shift
& Throttle
176461 Digital
Gauges &
MWS
766907 25' Oil Fill Hose to Connect Kit and Tank (not for gasoline) - 11/2" I.D. 1 SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Filter - Fuel & Water Separator Kit - 25 Micron Fuel & Oil Systems
Filter - Fuel & Water Separator Kit - 25 Micron

Evinrude Filters out dirt, lint and water. For all outboards and stern drives.
E-TEC G2 Includes replacement spin-on filter
Use 1/4 male pipe thread fittings (not included)
Digital Shift
& Throttle
174176
Digital 174176 Fuel Filter Kit (POP) - 25 Micron 1
Gauges &
MWS 502905 Replacement Fuel Filter - 25 Micron, 1" thread size 1
Filter, Racor Fuel & Water Separating Kit, See-Thru Bowl

SystemCheck
Gauges External mount applications only.
& MWS
771866 & 771896 with 11/16 thread 771864 & 771839 with 1 thread
771866 Kit includes see-thru bowl 771864 Kit includes see-thru bowl
Fits: Yamaha, Suzuki, SMI, Sierra, Volvo Fits BRP applications
Portable Penta and AquaPower heads.
4-Stroke
i-Dock 771866
Joystick
System
771866 Replaces Mercruiser Quicksilver #35-60494-1 (11/16" thread) 1
771896 Replacement Element S3213 without Bowl (11/16" thread) 1

Rigging
Accessories 771864 Kit with See-Thru Bowl (1" thread) for BRP applications 1
771839 Replacement Element S3214 without Bowl (1" thread) for BRP applications 1
Fuel & Oil Filter, Racor Fuel & Water Separating Kit, Metal Bowl
Systems
Internal or external mount applications.
771840 & 771841 with 11/16 thread 771842 & 771843 with 1 thread
771840 Kit includes metal bowl 771842 Kit includes metal bowl
Steering Fits: Yamaha, Suzuki, SMI, Sierra, Volvo Fits BRP applications
Penta and AquaPower heads.
Propellers
771840

771840 Replaces Mercruiser Quicksilver #35-60494-1 (11/16" thread) 1
Oil &
Engine 771841 Replacement Element S322TUL without Bowl (11/16" thread) 1
Care
771842 Kit with Metal Bowl (1" thread) for BRP applications 1
771843 Replacement Element S3221TUL without Bowl (1" thread) for BRP applications 1
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Fuel & Oil Systems Fitting - Quick Disconnect
Fitting - Quick Disconnect

Point of Purchase Packaged Evinrude
E-TEC G2
Digital Shift
& Throttle
775641
334913 775640 Digital
Gauges &
MWS
775640 Quick Disconnect Fittings for 5/16" I.D. hose (POP) 1
SystemCheck
775641 Quick Disconnect Fittings for 3/8" I.D. hose (POP) 1 Gauges
& MWS
334913 O-Ring Single Line Connector (fits 775640 & 775641) 5

Portable
Bulk fuel line may be shipped in a non-continuous roll. 4-Stroke
Priced by the foot in multiples of dealer pack quantity
i-Dock
Joystick
System
772564
772564 Fuel Line 25 25' 5/16" ID Rigging
Accessories
772565 Fuel Line 50 50' 3/8" ID
772576 USCG A-1 Hose 50 50' 3/8" ID

Fuel & Oil
Systems

Steering
173311
Propellers
Oil &
767517 Engine
Care
767517 Nipple 1/4" Male Pipe Thread to 516" I.D. Hose 1
Reference
Drawings
Fitting - Fuel, for Filter/Water Separator & Info
173312 Part
Number
P/N Description Pack qty Index
Alphabetical
Index

Fitting - Fuel, for Filter/Water Separator Fuel & Oil Systems

Evinrude
E-TEC G2

& Throttle
778775 Fuel Fitting 1/4" x 5/16" 90 1
Digital
Gauges & Fitting - Fuel, for Filter/Water Separator
MWS
SystemCheck
Gauges
& MWS 778776
Portable
4-Stroke
Fitting - Fuel
i-Dock
Joystick
System 174179
Rigging
Accessories
Valve, Anti-Siphon
Fuel & Oil

Systems 173274

Steering
173275 1/4" Male Pipe Thread to 3/8" Copper Tube 1
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Fuel & Oil Systems Hose - Fuel Line-EPA Guidelines

The EPA and CARB have mandated reduced fuel permeation from specific fuel system components. The legislation applies to all marine Evinrude
manufacturers and component suppliers of fuel hoses, primer bulbs and portable fuel tanks. E-TEC G2
The fuel components listed are all EPA and CARB compliant. Digital Shift
& Throttle
Quick disconnect at motor and tank end.
5/16 I.D. hose 8' long Digital

SAE J30R9 rated hose Gauges &
Meets USCG B115 spec MWS
SystemCheck
Gauges
& MWS

5008609 Quick Disconnect at Motor and Tank End (POP) - EPA Compliant 1 8' 5/16"
Portable
4-Stroke
Quick disconnect at motor end only.
5/16 I.D. hose 8' long i-Dock

SAE J30R9 rated hose Joystick
Meets USCG B115 spec System
Rigging
Accessories

5008607 Quick Disconnect at Motor End Only (POP) - EPA Compliant 1 8' 5/16" Fuel & Oil
Systems

Disconnect at motor end only.
5/16 I.D. hose 3.5' long Steering

Meets USCG B115 spec
Propellers

Oil &
5008599 Disconnect at Motor End Only (POP) - EPA Compliant 1 3.5' 5/16" Engine
Care

3/8 I. D. hose 10' long Reference
SAE J30R9 rated hose Drawings
Meets USCG B115 spec & Info
Part
Number
Index
Alphabetical
Index

Hose & Primer Bulb Assembly EPA Compliant Fuel & Oil Systems

Evinrude Quick disconnect at motor and tank end.
E-TEC G2
Digital Shift
& Throttle

Digital
Gauges & Quick Disconnect at Motor and Tank End (POP) - EPA Compliant 1
5008589 10' 3/8"
MWS

SystemCheck Quick disconnect at motor end
Gauges only.
& MWS
3/8 I.D. hose 3' long
Portable
4-Stroke
i-Dock
Joystick
System Quick Disconnect at Motor End Only (POP), 25 pack - EPA Compliant
5008579 25 3' 3/8"
Hose and Primer Bulb Assembly EPA Compliant

Rigging
Accessories Quick disconnect at motor end only
3/8 I.D. hose 5 1/2' long

Fuel & Oil

Systems

Steering
5008582 Quick Disconnect at Motor End Only (POP) - EPA Compliant, 25 pack 25 5 1/2' 3/8"

Propellers Quick disconnect at motor end only

Oil &
Engine
Care

Reference
Drawings 5008580 Quick Disconnect at Motor End Only (POP) - EPA Compliant, 25 pack 25 7 1/2' 3/8"
& Info
Part
Number
Index
Alphabetical
Index

Fuel & Oil Systems Hose and Primer Bulb Assembly EPA Compliant

Quick disconnect at motor end only Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
P/N Description Pack qty Length Dia. Gauges &
MWS
5008581 Quick Disconnect at Motor End Only (POP) - EPA Compliant, 25 pack 25 9 1/2' 3/8"
Fuel Primer Bulb Assembly, EPA Compliant SystemCheck

Primer bulb assemblies for 5/16 or 3/8 hose. Gauges
Meets EPA and Carb requirements for MY12 & MWS
Portable
5008605 4-Stroke

i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Fuel Tank - Dura-TankTM 6 Gallon EPA Compliant Fuel & Oil Systems
Fuel Tank - Dura-TankTM 6 Gallon EPA Compliant

Evinrude EPA Compliant
E-TEC G2 Quick disconnect fuel fitting
Auto one-way venting
Built-in fuel gauge
Withstands alcohol extended fuels
Self-sealing fuel connector
Digital Shift Excess fuel line storage
& Throttle

Gauges &
MWS 5008623 6 Gallon (22.7 Liter) Fuel Tank - EPA Compliant 1
767525 Replacement Cap (POP) 1
SystemCheck
Gauges
Fuel Tank - Dura-Tank TM Universal EPA Compliant
& MWS Now all of your customers can have the Dura-Tank TM . The same
durable construction without the quick disconnect.
EPA Compliant
Equipped with 1/4 NPT thread
Portable
4-Stroke
i-Dock
Joystick
5008621 6 Gallon Universal Fuel Tank - EPA Compliant 1
767525 Replacement Cap (POP) 1

Rigging
Accessories
Fuel Tank - Dura-TankTM Anchor Kit
The Dura-TankTM anchor kit provides a perfectly matched tray to
securely hold a Dura-Tank TM or steel tank from shifting or sliding.
Tray can be installed in minutes with six stainless steel screws
Fuel & Oil Anchor tray strap has a quick disconnect buckle allowing the
Systems tank to be removed and replaced easily
Point of Purchased Packaged
175293
Steering
175293 Dura-TankTM Anchor Kit (POP) 1
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Fuel & Oil Systems Clamps - Oetiker Ear
Clamps - Oetiker Ear

Purchase individually or as a kit. Evinrude
Kit consists of 20 each of P/N 346150; 1 of P/N 352868 and 10 E-TEC G2
each of the remaining part numbers
A= clamp identification number
Digital Shift
& Throttle
Digital
Gauges &
MWS
P/N Description Size ID

SystemCheck
787133 Ear Clamp Kit (Pincer tool sold separately)
Gauges
346150 Clamp Ear 18.5mm 185 & MWS
346151 Clamp Ear 21 mm 210
346152 Clamp Ear 25.6mm 256

Portable
346153 Clamp Ear 30.1 mm 301 4-Stroke
346785 Clamp Ear 14.5mm 95
346786 Clamp Ear 15.7mm 157

i-Dock
346930 Clamp Ear 9.5mm 145 Joystick
System
346931 Clamp Ear 14mm 140
347107 Clamp Ear 13.3mm 133
347108 Clamp Ear 13.8mm 138

Rigging
348838 Clamp Ear 10.5mm 105 Accessories
348839 Clamp Ear 17.0mm 170
349516 Clamp Ear 11.3mm 113
349729 Clamp Ear 41.0mm 410 Fuel & Oil

Systems
352868 Clamp Ear 69.5 mm 695
Clamps - Oetiker Pincer

Jaw pincers are used to properly install stepless clamps. Steering
350860 Propellers

350860 Oetiker Clamp Pincer 1
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Clamps - Plastic Snap Fuel & Oil Systems
Clamps - Plastic Snap

Evinrude Chart dimensions shown: A snapper completely closed,
E-TEC G2 excluding rib. Average of the three angles. B same as A
except with two teeth engaged.
Digital Shift
& Throttle
Digital
Gauges &
MWS Unit of A, min. B, max.
P/N Description C D E F # of teeth
measure dia. dia.
500093 SNP-1 in. 0.228 0.256 0.148 0.040 0.451 0.320 12

SystemCheck
mm. 5.80 6.5 3.80 1.00 11.50 8.10
Gauges
& MWS 500094 SNP-1.5 in. 0.307 0.342 0.146 0.054 0.587 0.410 12
mm. 7.80 8.70 3.70 1.40 14.90 10.40
322653 SNP-2 in. 0.351 0.394 0.231 0.067 0.672 0.472 12
mm. 8.90 10.00 5.90 1.70 17.10 12.00
Portable
4-Stroke 124249 SNP-4 in. 0.404 0.452 0.233 0.066 0.749 0.524 12
mm. 10.30 11.50 5.90 1.70 19.00 13.30
322654 SNP-6 in. 0.449 0.511 0.233 0.069 0.838 0.572 14
mm. 11.40 13.00 5.90 1.80 21.30 14.50
i-Dock
Joystick 322652 SNP-8 in. 0.513 0.586 0.231 0.069 0.971 0.647 16
System mm. 13.00 14.90 5.90 1.80 24.70 16.40
911616 SNP-10 in. 0.569 0.650 0.233 0.068 1.028 0.675 16
mm. 14.50 16.50 5.90 1.70 26.10 17.20
329654 SNP-12 in. 0.616 0.707 0.234 0.070 1.062 0.689 18
Rigging
Accessories mm. 15.70 18.00 5.90 1.80 27.00 17.50
329653 SNP-14 in. 0.702 0.801 0.233 0.067 1.156 0.744 18
mm. 17.80 20.40 5.90 1.70 29.40 18.90
500095 SNP-18 in. 0.779 0.899 0.237 0.069 1.337 0.857 22
Fuel & Oil mm. 19.80 22.80 6.00 1.80 34.00 21.80
Systems
324825 SNP-19 in. 0.859 0.989 0.232 0.070 1.409 0.899 22
mm. 21.80 25.10 5.90 1.80 35.80 22.80
500096 SNP-22 in. 0.989 1.072 0.234 0.070 1.473 0.932 22
mm. 23.60 27.20 5.90 1.80 37.40 23.70
Steering 500097 SNP-24 in. 0.985 1.135 0.292 0.069 1.523 0.963 22
mm. 25.00 28.80 7.40 1.80 38.70 24.50
500098 SNP-28 in. 1.123 1.296 0.288 0.068 1.631 1.008 26
mm. 28.50 32.90 7.30 1.70 41.40 25.60
Propellers 500099 SNP-32 in. 1.218 1.405 0.287 0.068 1.724 1.064 26
mm. 30.90 35.70 7.30 1.70 43.80 27.00
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Fuel & Oil Systems Clamps - Plastic Snap
Clamps - Plastic Snap

Made from acetal material. Dimensions shown in application Evinrude
chart. E-TEC G2
Digital Shift
& Throttle
322652
500093 Snap Clamp-1 25 Digital
Gauges &
500094 Snap Clamp-1.5 25 MWS
322653 Snap Clamp-2 25

SystemCheck
322654 Snap Clamp-6 25 Gauges
& MWS
911616 Snap Clamp-10 25
329654 Snap Clamp-12 25 Portable

4-Stroke
329653 Snap Clamp-14 25
500095 Snap Clamp-18 25
324825 Snap Clamp-19 25 i-Dock

Joystick
500096 Snap Clamp-22 25 System
500098 Snap Clamp-28 25
500099 Snap Clamp-32 25

Rigging
Accessories
Clamps - Plastic Snap Kit
Kit consists of 5 each of the snap clamps from the application
chart.
Fuel & Oil

Systems
Steering
500100
Propellers
500100 Plastic Snap Clamp Kit 1
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Clamps - Plastic Snap Kit Fuel & Oil Systems
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Steering
Remote Control Adapter

Evinrude E-TEC 25-30 HP - Converts tiller controlled engines to remote shift and throttle control. Evinrude
E-TEC G2
1. If converting a DT model outboard (tiller with power trim and tilt), Trim
and Tilt Harness, P/N 587028 is required to control trim function from
remote control trim switch.
2. If installation of a trim gauge is desired, order sending unit and
mounting hardware separately. Digital Shift
3. Refer to appropriate parts catalog. For remote steering order Steering & Throttle
Connector Kit, P/N 5009753.
Digital
Gauges &
5007742 MWS
P/N Engine Year

5007742 Remote Control Adapter Evinrude E-TEC 25-30 HP 2009-thru SystemCheck
Gauges
& MWS
Steering Friction Kit
This kit adds external steering friction to engines that have a tiller
kit installed (included in 75115 HP tiller kits).
Portable
5007322 Steering Friction Kit (40-115 HP), 2004-AB 1
Kicker Cable Tie Bar, SeaStar i-Dock

Joystick
This SeaStar product allows a user to manually steer an auxiliary engine (kicker motor) using the System
existing SeaStar hydraulic steering system. Today this is accomplished with a variety of solid
mechanical linkages between the main engine and the auxiliary engine. Teleflex has developed
a patent pending design that incorporates a Teleflex Extreme cable as a linkage between the
Rigging
two engines. Accessories
Features: Simplified installation using universal ABYC steering connection (as per ABYC P17 & P21 standards)
Flexible cable allows for adjustable locations on kicker motor.
of kicker motor. Retrofit to SeaStar Front Mount Cylinders.
Allows independent trim/tilt of both engines. Incorporates unique Teleflex Extreme cable technology.
Allows full steering stroke of both engines. Fuel & Oil
Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info

Part
765518 HO6116 Sea Star Auxiliary Outboard Cable & Tie Bar - 16" cable 16" Number
Index
765524 HO6122 Sea Star Auxiliary Outboard Cable & Tie Bar - 22" cable 22"
765528 HO6128 Sea Star Auxiliary Outboard Cable & Tie Bar - 28" cable 28"
Alphabetical
Index

Steering Kits, Engine Mounted Steering
Steering Kits, Engine Mounted

Evinrude Engine Mounted Steering / Engine Mounted Steering/ Engine-Mounted Steering/
E-TEC G2
Single Engine Dual Engines Dual Engines
Single cable -parallel, starboard or port entry Dual cable-parallel, starboard or port entry Dual cable-opposite entry (starboard or port
engine)
Digital Shift *Shipped with engine Dual cable parallel entry steering kit Dual cable parallel entry steering kit
& Throttle
Use one of the tie bar kits. Use one of the tie bar kits.
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Tie Bars, Adjustable

Portable
4-Stroke Fits FasTrak stern bracket only.
Not for Evinrude E-TEC G2
175172
Joystick
System 175172 24"-30" Centerline 1
175173 30"-36" Centerline 1
Rigging Tie Bar Kit with Adapter Plates

Accessories
Fuel & Oil

Systems
770901
P/N
Steering Teleflex P/N
Description
Length
Steering Link Kit, FasTrak

Propellers 3 cylinder - V6, 1991 and newer except 88 and 112 HP, includes
V6 E-TEC
75-90 HP Evinrude E-TEC
115-130 HP
5009794
Oil &
Engine P/N Description Pack qty
Care
5009794 Steering Link Kit 1
Steering, Parallel Entry-Dual Cable, FasTrak

Reference
Drawings 3 cylinder - V6, 1991 and newer, except 88 and 112 hp, includes
& Info V6 E-TEC
Part 175322
Number
175322 Parallel Entry - Dual Cable 1
Alphabetical
Index

Steering Steering Packages, SeaStar HK 6400
Steering Packages, SeaStar HK 6400

Package includes helm, cylinder, oil, and bleeder kit. Evinrude
E-TEC G2
Applications: Features:
FasTrak midsection only Standard 3/4 tapered steering
300 HP (max) single engine wheel shaft
600 HP (max) twin engine 2 year limited warranty
counter rotating Suitable for all major outboard
1991 and newer brands Digital Shift
4.5 turns from lock-to-lock & Throttle
Digital
772457 Gauges &
MWS
Steering Packages, SeaStar HK6400

P/N Teleflex P/N Description Length SystemCheck
Gauges
772457 HK6400 Sea Star Steering Package & MWS
Hose Kits, SeaStar

Portable
P/N Teleflex P/N Description Length 4-Stroke
770906 HO5112 Hose kit 12'
773182 HO5114 Hose kit 14'
773183 HO5116 Hose kit 16' i-Dock

Joystick
770907 HO5118 Hose kit 18' System
770908 HO5120 Hose kit 20'
770909 HO5122 Hose kit 22'

Rigging
770910 HO5124 Hose kit 24' Accessories
Steering Packages, SeaStar PRO HK 7400

Package includes helm, cylinder, oil, and bleeder kit.
Fuel & Oil
Applications: Features: Systems
300 HP (max) single Standard 3/4 tapered steering
engine wheel shaft
Speeds 70+ mph 2 year limited warranty
Suitable for all major outboard
brands
4 turns from lock-to-lock Steering
772458 Propellers
Steering Packages, SeaStar PRO HK7400

Oil &
772458 HK7400 Engine
Sea Star Pro Steering Package
Care
Hose Kits, SeaStar PRO

P/N Teleflex P/N Description Length Reference
Drawings
772964 HO5710 Pro Hose kit 10' & Info
767412 HO5712 Pro Hose kit 12'

Part
773185 HO5716 Pro Hose kit 16' Number
Index
772968 HO5722 Pro Hose kit 22' Alphabetical

Index

Helm, Front Mount Steering
Helm, Front Mount

Evinrude
E-TEC G2
Digital Shift
& Throttle
770894
Digital 770894 HH5271 1.7 Cu. In. Displacement, Sea Star Helm
Gauges &
MWS 770895 HH5272 2.4 Cu. In. Displacement, Sea Star Helm
Helm, SeaStar PRO

SystemCheck
Gauges P/N Teleflex P/N Description Length
& MWS
772970 HH5770 Sea Star Pro Helm
Helm Mounting Backplate Kit

Portable
4-Stroke Backplate kit is used with a SeaStar front mount helm.
Retrofit a new SeaStar helm in the old 4.5 (115 mm) hole, or
Reduce helm protrusion from the dash by dash thickness, or
Retrofit new SeaStar standard helm into hole cutouts for
mechanical and hydraulic steering systems on chart.
i-Dock For SeaStar and SeaStar PRO
Joystick
System
Rigging
Accessories
770889
770889 HA5418 Helm Mounting Backplate Kit
Fuel & Oil
Systems Note: Maximum steering wheel diameter is 28 (711 mm)
Helm Mount Kit with 20 Wedge
Steering
Propellers
770890

Oil & 770890 HA5419 Helm Mount Kit with 20 Wedge
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Steering Steering Packages, BayStarTM Hydraulic
Steering Packages, BayStarTM Hydraulic

With mechanical steering you sacrifice a degree of comfort, and
traditional hydraulic systems may be more than is needed on Evinrude
lower horsepower engines. The solution is finally here - E-TEC G2
Built in the tradition of SeaStar, BayStar TM brings the same
safety and comfort now common on larger outboard powered
boats with 150 HP (Total). BayStar TM hydraulic steering is
brought to you by the manufacturers of SeaStar, the most
trusted name in pleasure boat steering. Digital Shift
& Throttle
Designed just for smaller outboards
Low friction hydraulic steering system
4.5 turns from lock to lock
Balanced cylinder, featuring a compact design that fits most
splashwells and provides full engine movement Digital
Compact helm has only a 5 footprint; needs only 3 dash hole Gauges &
(standard or tilt) MWS
Packaged complete with helm, cylinder, fittings, tubing, oil, fill
kit and detailed instructions
Standard 3/4 tapered steering shaft
Enough cut-to-fit tubing for either 20' run is supplied SystemCheck
Fast, easy installation Gauges
Meets NMMA certification requirements & MWS

776814 Bay Star Hydraulic Steering, 20' Hose - 150 HP & Below 1
Portable
4-Stroke
Steering Fluid, SeaStar
SeaStar hydraulic steering fluid is formulated to provide
the best performance for your SeaStar/BayStar steering
system. A perfect blend of viscosity stabilizers, anti-wear
i-Dock
agents and corrosion inhibitors will ensure maximum steering Joystick
life performance. System
SeaStar Electronic Power Steering Fluid, is used for
electro-hydraulic steering systems on boats.
Rigging
Accessories
Fuel & Oil

Systems
770891
770891 HA5430 Sea Star Hydraulic Steering Fluid (quart)
768404 HA5482 Sea Star EPS Fluid (quart) Steering
Cylinder, Pivot Mount

V4 & V6 E-TEC
Single or dual engine application
Propellers
772971
Oil &
P/N Teleflex P/N Description Length Engine
Care
772971 HC5345 Cylinder Pivot Mount
Tie Bar Kit, Front Mount

Reference
Drawings
& Info
Part
Number
772972 Index
772972 HO6001 Single Cylinder, Twin Engine, Non E-TEC 36"
772973 HO6002 Twin Cylinder, Twin Engine, All Models 36" Alphabetical
Index
772974 HO6003 V4 & V6 E-TEC & Direct Injection, Suzuki, Twin Engine, Single Cylinder 36"

Cylinder & Tie Bar Chart Steering
Cylinder & Tie Bar Chart

Evinrude
E-TEC G2
Tie bar kits
Engine Single Dual
Year Model Cylinder Notes
manufacturer cylinder cylinder
Digital Shift HO5030 and HO5064
Evinrude/Johnson 19771990 65300 HP HC5348 HO6003 HO6002
& Throttle come with tie bar
19881997 250300 HP V8 HC5342 HO5001A HO5030
1991 to date* 40250 HP HC5345 HO6003 HO6002
1996 to date 75250 HP Ficht HC5345 HO6003 HO6002
Digital
Gauges & 1998 to date 40140 HP 4Stroke HC5358 HO6003 HO6002 requires kit HO5090
MWS
2000 to date 115 HP Ficht HC5358 HO6003 HO6002
2002 to date 200225 HP 4Stroke HC5345 HO6003 HO6002 requires kit HO5090
2005 to date 115300 HP E-TEC HC5345 HO6003 HO6002
SystemCheck
Gauges * Single engine only
& MWS
Steering Module, Power

Portable
4-Stroke SeaStar Power Assist steering brings automotive-type steering comfort and control to powerboats.
The addition of a Power Assist unit will greatly reduce steering effort and enhance the boating experience for everyone.
i-Dock
The SeaStar Power Assist steering unit is designed for use with SeaStar manual hydraulic steering systems and is suited for all
Joystick heavy / high torque steering applications.
System
Features:
Dramatically reduces wheel torque
Easy to install
Simple add on to an existing SeaStar manual system
Rigging (optimal performance achieved when used with SeaStar 1.4
Accessories 2.0 pumps)
OEM or Retro fit
Compatible with power purge system
Reverts to manual mode in the case of power loss.
Suitable for use with autopilots
Fuel & Oil 12v operation
Systems Wall or floor mounted
Wiring harness, and mounting bracket included
Ignition protected (SAE J-1171)
ABYC, CE, NMMA, ISO 10592 Approved 763691
Steering P/N Teleflex P/N Description Length

763691 PA1200 Power Assist Module and Hose Kit
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Propellers

Evinrude
15H.O.-30 HP Evinrude E-TEC, 2-Stroke E-TEC G2

765048 Aluminum 3 11 9 Digital Shift
& Throttle
765049 Aluminum 3 101/2 11
765135 Aluminum 4 10.2 11
765050 Aluminum 3 10.3 12
765136 Aluminum 4 10.1 12 General Purpose and Economy
Digital
Gauges &
778863 Aluminum 3 10.3 13 MWS
765137 Aluminum 4 10 13
765138 Aluminum 4 10 14
763486 Aluminum 3 10 15
SystemCheck
765139 Aluminum 4 10 15 Gauges
765176 SSP 3 10 11 & MWS
765174 SSP 4 10 11
765177 SSP 3 10 12
765175 SSP 4 10 12 Portable
765178 SSP 3 10 13 4-Stroke
766153 SSP 4 10 13
765179 SSP 3 10 14
765180 SSP 3 10 15
i-Dock
Joystick
40-130 HP Evinrude E-TEC (Excludes 25 Models) System

Rigging
763301 AluminumTM 3 14 11 Accessories
765181 AluminumTM 3 13 3/4 13
765183 AluminumTM 3 131/4 17
765184 AluminumTM 3 13.2 19 Fuel & Oil
Systems
765185 AluminumTM 3 13.2 21
763957 SSP 3 13 3/4 13 Steering
763950 SSP 3 131/2 15

763951 SSP 3 13 1/4 17
763952 SSP 3 13 19
763929 ViperTM 3 13 7/8 15 Propellers
763932 ViperTM 3 13 7/8 21
763953 Raker 3 13 1/2 18 Oil &
763954 Raker 3 13 1/2 20 High Performance Bow Lifter Engine
Care
763956 Raker 3 13 1/2 24
763964 RogueTM 4 131/2 13
763965 RogueTM 4 131/4 15
Reference
763966 RogueTM 4 13 17 Flat Boats and Runabouts Drawings
763967 RogueTM 4 13 19 & Info
763968 RogueTM 4 13 21
Part
Number
Index
Alphabetical
Index

Propeller Quick Reference Guide Propellers

Evinrude
E-TEC G2
Right Left
Hand Hand
Standard Counter
Rotation Rotation
Digital Shift
763453 Aluminum 3 151/2 13
765186 Aluminum 3 15 15
General Purpose
765187 Aluminum 3 14 7/8 17
and Economy
Gauges &
MWS 765189 Aluminum 3 14.3 21
763470 Aluminum 3 141/4 23
763959 SSP TBXTM 3 15 5/8 11
Durability and
763960 763961 SSP TBXTM 3 15 5/8 13
Gauges 763962 763963 SSP TBXTM 3 15 15
& MWS
763910 763911 ViperTM TBXTM 3 15 14
763912 763913 ViperTM TBXTM 3 14 3/4 16
763914 763915 ViperTM TBXTM 3 14 3/4 17
Portable
763920 763921 ViperTM TBXTM 3 14 3/4 20
763922 763923 ViperTM TBXTM 3 14 1/2 21
System
763938 763939 CycloneTM TBXTM 4 14 1/4 17
763940 763941 CycloneTM TBXTM 4 14 1/8 18
Cruising and
763942 763943 CycloneTM TBXTM 4 14 1/8 19
Transom Lift
763948 763949 CycloneTM TBXTM 4 14 23
763984 763985 Rebel TBXTM 3 15 3/4 15
763986 763987 Rebel TBXTM 3 15 1/2 17
Fuel & Oil
Speeds and
763992 763993 Rebel TBXTM 3 15 1/8 20
Improved Fuel
763996 763997 Rebel TBXTM 3 14 7/8 22
Steering
763998 763999 Rebel TBXTM 3 14 3/4 23
764000 764001 Rebel TBXTM 3 14 1/2 25
inshore, pontoon,
Reference
& Info
Part
Number
Index
Alphabetical
Index

Propellers Raker H.O. with Variable Vent Port (VVP)
Raker H.O. with Variable Vent Port (VVP)

Fast, Fast, Fast. The Raker legend lives on with the Raker Evinrude
H.O. The Raker propeller line has always set the highest E-TEC G2
standard in top speed performance. The Raker H.O. is the
next evolution in the line maximizing the superior power and
torque of the Evinrude E-TEC G2 outboard and every V6
Evinrude/Johnson before it. Tight tolerances, precision
manufacturing, and hand finishing - move the Raker H.O. one
step closer to a high performance custom propeller. Digital Shift
& Throttle
Complimenting the legend are the new Variable Vent Ports
(VVP) for custom acceleration calibration. Set your boats hole
shot from mild to wild.
Available in right hand rotation sizes 22, 24, 25, 26 and 28 pitch.
Digital
Gauges &
MWS
Rx4TM with Variable Vent Port (VVP)
The Rx4 TM is a no compromises 4 blade propeller. Rx4 TM masters
the power curve of the new Evinrude E-TEC G2 engine. It is SystemCheck
optimized for traction and rough water performance with industry Gauges
leading speed, acceleration, and fuel economy. It delivers & MWS
superior bow lift on larger boats and does not slip in turns.
Variable Vent Ports - VVP let you custom tune acceleration
for blistering hole shots.
Every propeller is hand finished and precision gauged for
quality and consistency. Portable
Available in right hand rotation sizes 18, 20, 22, 24, 25 and 4-Stroke
26 pitch.
Available in left hand rotation sizes 18, 20, 22, 24 pitch.
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Raker & Raker II - Bass and High Performance Propellers
Raker & Raker II - Bass and High Performance

Evinrude Looking to plane fast - and run faster? The Raker II prop is
E-TEC G2 specially designed for building up engine RPMs and getting you
on plane faster. A great prop in surfacing conditions, especially
when the boat is running over 50 mph. Perfect for bass boats
and high performance boats. The Raker propeller utilizes
vent holes in the outer exhaust hub to allow exhaust gases to
ventilate the blade area. This allows the engine to build up RPMs
Digital Shift and get the boat on plane faster. At higher speeds, the water
& Throttle rushing past the hub blocks these vent holes, preventing them
from ventilating the blades. V6 Raker II 22, 24, 26, & 28 use
the TBXTM hub system.
Fast, Fast, Fast...
Custom cupped high rake blades provide superior bow lift and
Digital exceptional top end speed
Gauges & Special vent holes for powerful acceleration
MWS V4 & V6 engines
Rebel TM - Offshore and Cruising

SystemCheck
Gauges
The Rebel TM propeller is designed and engineered to deliver
& MWS
improved midrange cruising and top end performance on V6
Evinrude E-TEC. Large diameter and efficient blade contour
provide faster speeds at lower RPMs to deliver significant
improvement in fuel economy. Your customers will get more
miles to the gallon and a longer cruising range. Standard
rotation and counter rotation models are available from 15 to 25
Portable inch pitch. Use the Rebel TM propeller on offshore boats, large
4-Stroke runabouts, and even large pontoon boats to make them perform
to their maximum potential.
High polish stainless steel
Designed and engineered for efficient midrange cruising
Improved fuel economy with longer cruising range
i-Dock Use on offshore boats, large runabout, and pontoon boats.
Joystick
System
Cyclone TM - 4-Blade Offshore Cruising and Runabouts

When you need a prop that can hold course straight and true
Rigging in all water conditions, trust the Cyclone TM prop to maintain
Accessories compass headings and stay hooked up in big water. Designed for
heavier and twin-engine boats as well as runabouts. CycloneTM
uses the TBX TM hub system.
Ultimate performance 4-blade offshore and runabout propeller
Stays on plane with minimum RPM
Fuel & Oil Tracks true in all water conditions
Systems Less vibrations and improved fuel economy
V6 engines
Steering
ViperTM - Runabouts and General Recreation

If you want speed, you want the Viper TM prop. It's longer swept
blades and a larger diameter give this prop a better grip on the
water faster acceleration, and greater top end speed. Excellent
Propellers on any recreational boat, from runabouts and cruisers to deck
boats.
Versatile 3-blade performance
Custom high luster finish
Balance of speed and durability
Oil & V4 & V6 engines
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Propellers RogueTM
RogueTM
The new RogueTM propeller for the 20 shaft, 40 through 115 hp Evinrude
Evinrude E-TEC provides faster acceleration and faster top E-TEC G2
speeds in stern heavy boats. Flats boat operators will appreciate
this propellers ability to lift the transom and accelerate cleaner
in shallower water.
Stainless steel 4-blade design
Polished, high luster finish
Digital Shift
Available in 13, 15, 17, 19, and 21 inch pitch sizes
& Throttle
Digital
Gauges &
MWS
SSP Prop - General Purpose and Durability
Since stainless steel is five times stronger than aluminum, the
SSP can be designed and cast with thinner blades... blades that
are cupped to provide better performance. SystemCheck
This versatile prop is an ideal upgrade replacement for aluminum Gauges
propellers and provides greater performance for water skiing. If a & MWS
customer has an aluminum propeller, a direct pitch replacement
(same pitch and diameter) is recommended when upgrading
to an SSP.
Fast planing 3-blade versatile prop Portable
Ideal upgrade from aluminum 4-Stroke
Cupped blades provide superior performance
Hydrus - Pontoon and Work Boats

i-Dock
A high-thrust prop designed and manufactured to meet the Joystick
specific performance needs of pontoon boats and work boats. System
This three-blade propprovides an oversized blade area for
maximum thrust and stability (it will keep its grip even when most
of the weight is near the bow) and aggressive cupping for tight,
balanced turning. The result? A high-thrust prop that bites the
water and hangs on tight.
Aggressive cupping holds tight in turns Rigging
Big blade area for high reverse thrust Accessories
Special blade contour delivers maximum thrust in any water
condition
Fuel & Oil

Systems
Evinrude/Johnson Aluminum TM Props

- More Performance for the Money! Evinrude/Johnson
props are cast with a custom aluminum alloy to give them greater
strength and longer life than ordinary propellers. Many of the Steering
Evinrude/Johnson outboards are speed cupped for better top
end performance. Special baked-on corrosion-resistant paint
gives added protection against salt water and galvanic corrosion.
Precision casting provides greater strength and longer life
Baked-on corrosion-resistant paint gives added protection
Engineered to match the power curve of your outboard for
superior performance Propellers
Oil &
Propeller Note Engine
Care
This catalog is not intended to be an all inclusive listing of propellers for every Evinrude/Johnson outboard. Refer to the
specific engine parts catalog for engines not listed.
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

TBXTM Propeller Hub System Propellers
TBXTM Propeller Hub System

Evinrude For Evinrude/Johnson Introducing the TBX TM Multiple Piece Propeller Hub System from Evinrude/Johnson Genuine
E-TEC G2 Parts. The TBX TM prop hub system adds a new level of durability and reliability to the V6 stainless steel propellers. TBX TM is designed
to flex and cushion shock loads to help protect the lower unit drivetrain. The patented torsion sleeve and drive spline withstand
extreme temperatures especially in high performance applications.
A TBXTM prop hub kit is a multi-piece design and slips together keeping the installation simple. Replacement parts are available
in kits or separately.
Look for the TBXTM designation in the V6 prop chart to determine availability.
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories TBXTM Competitor Propeller Hub System
We DARE You to Try Our Props on Competitor Outboards! Our interchangeable TBXTM hub kit is designed to fit
Mercury, Yamaha, Honda, and Suzuki V6 outboard engines.
This kit lets you install a Raker II TBX TM , Renegade Bass TBXTM , and Cyclone TM TBXTM propellers on competitor outboards.
Fuel & Oil TBX TM Propeller Hub Kit P/N 177288 for competitor outboards available July 2009.
Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Propellers Aluminum Propeller Interchangeable V4 Hub System
Aluminum Propeller Interchangeable V4 Hub System

For Evinrude/Johnson each propeller incudes a hub kit of P/N 765195 for a V4, fitting an Evinrude/Johnson outboard. Each hub Evinrude
kit includes the rubber torsion bushing, thrust washer, spacer and instructions. Accessory hub kits are required to install the propeller on E-TEC G2
competitive brands of engines. Select the accessory hub kit for competitive engines from the listing in this section.
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Aluminum Propeller Interchangeable V6 Hub System

For Evinrude/Johnson each propeller incudes a hub kit of P/N 765190 for a V6, fitting an Evinrude/Johnson outboard. Each hub Rigging
kit includes the rubber torsion bushing, thrust washer, spacer and instructions. Accessory hub kits are required to install the propeller on Accessories
competitive brands of engines. Select the accessory hub kit for competitive engines from the listing in this section.
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Propeller Hub System - TBX TM Part

Number
Index
767683 G2 TBXTM bushing kit (POP) - Evinrude E-TEC G2 2015 thru 1
177283 TBXTM bushing kit (POP) - Evinrude/Johnson outboards V6 (1976 thru 2015) 1
Alphabetical
177288 TBXTM bushing kit (POP) - competitive outboards V6 1 Index

Propeller Hub System-Aluminum Interchangeable Chart Propellers
Propeller Hub System-Aluminum Interchangeable Chart

Evinrude
E-TEC G2 Application Spline Year P/N
Evinrude/Johnson V4 45-75 HP, large gearcase 41/4 13 1968-current 765195

Evinrude/Johnson V4 85-140 HP 13 1969-current 765195
Digital Shift Evinrude/Johnson 90-140 HP, large gearcase 15 1991-current 765190
& Throttle
Force 75-150 HP 15 1995-current 765192
Honda 75-150 HP 15 1995-1998 765192
Digital Honda BF 135 HP, 150 HP, 200 & 225 HP 15 2003-current 765192
Gauges &
MWS Mercury/Mariner/MerCruiser 60 HP Bigfoot 15 765192
Mercury/Mariner/MerCruiser 70-140 HP (except 135 HP), XR-4, XR-6 15 1961-current 765192
SystemCheck
Mercury/Mariner/MerCruiser 135 HP 15 1987-current 765192
Gauges
& MWS Mercury/Mariner/MerCruiser 150-300 HP 15 1978-current 765192
Yamaha 80-140 HP 15 1978-1983 765192
Yamaha 150-175 HP 15 1978-1983 765192
Portable
4-Stroke
Yamaha 115 HP, FS115 (4-stroke), 130 HP 15 1984-current 765193
Yamaha 150-130 HP 15 1984-current 765193
Yamaha Sterndrives 15 1989-1993 765193
i-Dock
OMC Cobra SX 19 1994-current 765194
Joystick
System
Volvo SX Sterndrives 19 1994-current 765194
Honda 75-90 HP 15 1999-current 765196
Honda 115-130 HP 15 1999-current 765196
Rigging
Accessories Nissan/Tohatsu 90-140 HP 15 1987-current 765197
Mercury/Mariner/MerCruiser 225 EFI (4-stroke) manufactured by Yamaha 15 765198
Evinrude/Johnson 90, 115 HP (4-stroke) 15 2003-current 765199
Fuel & Oil
Systems Suzuki DF90, DF115 (4-stroke) 15 2001-current 765199
Suzuki DF140 (4-stroke) 15 2001-current 765200
Propeller Hub System - Aluminum Interchangeable

Steering
765195 V4 Aluminum Interchangeable Prop hub kit (POP) - Evinrude/Johnson 1
765190 V6 Aluminum Interchangeable Prop hub kit (POP) - Evinrude/Johnson 1

Propellers 1
765192 Aluminum Interchangeable Prop hub kit (POP) - Mercury, Yamaha, Honda
765193 Aluminum Interchangeable Prop hub kit (POP) - Yamaha 1
765194 Aluminum Interchangeable Prop hub kit (POP) - Volvo SX Sterndrive, Cobra SX 1
Oil &
765196 Aluminum Interchangeable Prop hub kit (POP) - Honda 1
Engine
Care 1
765197 Aluminum Interchangeable Prop hub kit (POP) - Nissan, Tohotsu
765198 Aluminum Interchangeable Prop hub kit (POP) - Mercury 225 EFI (Yamaha) 1
Reference 765199 Aluminum Interchangeable Prop hub kit (POP) - Suzuki DF90, DF115 1
Drawings
& Info 765200 Aluminum Interchangeable Prop hub kit (POP) - Suzuki DF140 1
766325 Aluminum Interchangeable Prop hub kit (POP) - Suzuki 60 / 70 HP 1
Part
Number
Index
Alphabetical
Index

Propellers Stainless Steel 15H.O.-35 HP, 2-Stroke Thru-hub Exhaust
Stainless Steel 15H.O.-35 HP, 2-Stroke Thru-hub Exhaust

14 Spline Evinrude
15H.O. Evinrude E-TEC E-TEC G2
20 & 25 HP, 1984 thru
25 HP Commercial, 1993 - 2005
30 HP, 1984 thru
35 HP, 1984 - 2005
25 - 30 HP Evinrude E-TEC, 2009 thru Digital Shift
& Throttle
RH P/N LH P/N Description Blades Dia. Pitch
765176 Stainless Steel 3 10" 11"

Digital
765177 Stainless Steel 3 10" 12" Gauges &
MWS
4 SystemCheck
766153 Stainless Steel 10" 13"
Gauges
765179 Stainless Steel 3 10" 14" & MWS
Portable
Aluminum 15H.O.-35 HP, 2-Stroke Thru-hub Exhaust 4-Stroke
14 Spline
15H.O. Evinrude E-TEC

20 & 25 HP, 1984 thru i-Dock
25 HP Commercial, 1993 - 2005 Joystick
30 HP, 1984 thru System
35 HP, 1984 - 2005
25 - 30 HP Evinrude E-TEC, 2009 thru
RH P/N LH P/N Description Blades Dia. Pitch Rigging

Accessories
765048 Aluminum 3 11" 9"
765049 Aluminum 3 101/2" 11"
765050 Aluminum 3 101/2" 12"

Fuel & Oil
778863 Aluminum 3 10.3" 13" Systems
763486 Aluminum 3 10" 15"
5008225 Aluminum 15H.O. High thrust 4 11" 7"
765135 Aluminum 4 10.2" 11" Steering

765136 Aluminum 4 10.1" 12"
765137 Aluminum 4 10" 13"
765138 Aluminum 4 10" 14"

Propellers
765139 Aluminum 4 10" 15"
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Stainless Steel 40-140 HP, 2-Stroke 13 Spline Propellers
Stainless Steel 40-140 HP, 2-Stroke 13 Spline

Evinrude 40/ 50/ 60 HP, Evinrude E-TEC, 2004 thru 70 HP, 1974 - 2001 110 HP, 1986 - 1989
E-TEC G2 45 HP Commercial, 1986 thru 75/ 90/ 115 HP, Evinrude E-TEC, 2004 115& 115 H.O. HP, 1973 thru
50 HP & 50 HP Commercial, 1971 - 1974 thru 120 HP, 1986 - 1994
55 HP Commercial, 1980 thru 75 HP, 1975 - 1984 & 2004 thru 130 HP Evinrude E-TEC,
55 HP, 1968 - 1969 85 HP, 1969 - 1980 & 1991 - 1995 2009-2010
60 HP, 1970 - 1971 & 1986 - 1996 88 HP, 1981 thru 125 HP, 1971 - 1972
Digital Shift 65 HP & 65 HP Commercial, 1972 - 1973 90 HP, 1981 thru 135 HP, 1973 - 1976
& Throttle 100 HP, 1979 - 1980 & 1988 thru 140 HP, 1977 - 1984 & 1986
-1994 ViperTM
Digital 763957 Stainless Steel Polished with Rubber hub 3 13 3/4" 13"
Gauges &
MWS 763950 Stainless Steel Polished with Rubber hub 3 13 1/2" 15"
763951 Stainless Steel Polished with Rubber hub 3 13 1/4" 17"
763952 Stainless Steel Polished with Rubber hub 3 13" 19"

SystemCheck
Gauges 763929 ViperTM with Rubber hub 3 13 7/8" 15"
& MWS
763930 ViperTM with Rubber hub 3 13 7/8" 17"

Portable
4-Stroke 763964 RogueTM with Rubber hub 4 131/2" 13"
763965 RogueTM with Rubber hub 4 131/4" 15"
763966 RogueTM with Rubber hub 4 13" 17"

i-Dock
Joystick 763967 RogueTM with Rubber hub 4 13" 19"
System
763968 RogueTM with Rubber hub 4 13" 21"
763953 Raker with Rubber hub 3 13 1/2" 18"
763954 Raker with Rubber hub 3 13 1/2" 20"

Rigging
Accessories 24"
763956 Raker with Rubber hub 3 13 1/2"
Aluminum 40-140 HP, 2-Stroke 13 Spline

Fuel & Oil 40/ 50/ 60 HP, Evinrude E-TEC, 2004 70 HP, 1974 - 2001 110 HP, 1986-1989
Systems thru 75/ 90/ 115 HP, Evinrude E-TEC, 2004 115 & 115 H.O. HP, 1973 thru
45 HP Commercial, 1986 thru thru 120 HP, 1986 - 1994
50 HP & 50 HP Commercial, 1971 - 1974 75 HP, 1975 - 1984 & 2004 thru 125 HP, 1971-1972
55 HP Commercial, 1980 thru 85 HP, 1969 - 1980 & 1991 - 1995 130 HP Evinrude E-TEC,
55 HP, 1968 - 1969 88 HP, 1981 thru 2009-2010
60 HP, 1970 - 1971 & 1986 - 1996 90 HP, 1981 thru 135 HP, 1973 - 1976
Steering 65 HP & 65 HP Commercial, 1972 - 1973 100 HP, 1979 - 1980 & 1988 thru 140 HP, 1977 - 1984 & 1986
- 1994

177201 Hydrus with Rubber hub [see service bulletin 2013-07(P)] 3 13 7/8" 9"
Propellers
763300 Aluminum with Rubber hub 3 14" 9"

Oil &
Engine 763301 Aluminum with Rubber hub 3 14" 11"
Care
765181 Aluminum with Interchangeable hub 3 13 3/4" 13"
Reference 765183 Aluminum with Interchangeable hub 3 13 1/4" 17"

Drawings
& Info 765184 Aluminum with Interchangeable hub 3 13.2" 19"
765185 Aluminum with Interchangeable hub 3 13.2" 21"
Part
Number
Index
Alphabetical
Index

Propellers Stainless Steel V6135-300 HP & 90-130 HP, 25 Shaft, 2-Stroke
Stainless Steel V6 135-300 HP & 90-130 HP, 25 Shaft, 2-Stroke

15 Spline Evinrude
E-TEC G2
90 & 115 HP Evinrude E-TEC, 25 Shaft, 2004 140 HP (25), 1989 thru 225 HP, 1986 thru
thru 150 & 155 HP Commercial, 235 HP, 1978 - 1985
100 HP, 2004 thru 1978 thru 2.6 liter, 1984-1985
100 HP Commercial, 1984 thru 150-300 HP, Evinrude 250 HP, 1991 thru
120&140 HP, 1985 E-TEC, 2004 thru 275 HP, 1986 - 1988
130 HP, 1995 - 1996 175 HP, 1977 thru 300 HP, 1988 thru Digital Shift
130 HP Evinrude E-TEC, 2009 - 2010 185 HP, 1984 - 1985 3.6 liter, 1986-1987 & Throttle
135 HP, 200 thru 200 HP, 1976 thru Evinrude E-TEC G2, 2015 thru
Raker H.O.
Digital
Note: All V6 stainless steel propellers, fitted to Evinrude E-TEC G2 outboards require additonal purchase of custom Gauges &
MWS
fit G2 TBX TM hub kit P/N 767683.

SystemCheck
763959 Stainless Steel Polished with Interchangeable hub 3 15 5/8" 11" Gauges
& MWS
763960 763961 Stainless Steel Polished with Interchangeable hub 3 15 5/8" 13"
763962 763963 Stainless Steel Polished with Interchangeable hub 3 15" 15"
763910 763911 ViperTM TBXTM with Interchangeable hub 3 15" 14" Portable
4-Stroke
763912 763913 ViperTM TBXTM with Interchangeable hub 3 14 3/4" 16"
763916 763917 ViperTM TBXTM with Interchangeable hub 3 14 3/4" 18" i-Dock
Joystick
763918 763919 ViperTM TBXTM with Interchangeable hub 3 14 3/4" 19" System
763924 763925 ViperTM TBXTM with Interchangeable hub 3 14 1/4" 22" Rigging
Accessories
763936 763937 CycloneTM TBXTM with Interchangeable hub 4 14 1/2" 15"

Fuel & Oil
763942 763943 CycloneTM TBXTM with Interchangeable hub 4 14 1/8" 19" Systems
763944 763945 CycloneTM TBXTM with Interchangeable hub 4 14" 20"
763946 763947 CycloneTM TBXTM with Interchangeable hub 4 14" 21"
763948 763949 CycloneTM TBXTM with Interchangeable hub 4 14" 23" Steering
763984 763985 RebelTM TBXTM with Interchangeable hub 3 15 3/4" 15"

Propellers
763994 763995 RebelTM TBXTM with Interchangeable hub 3 15" 21"

Oil &
763996 763997 RebelTM TBXTM with Interchangeable hub 3 14 7/8" 22" Engine
Care
767683 G2 TBXTM bushing kit (POP) - Evinrude E-TEC G2 2015 thru Reference
Drawings
177283 TBXTM bushing kit (POP) - Evinrude/Johnson outboards V6 (1976 & Info
thru 2015)
177304 Raker H.O. with Variable Vent Port (VVP) (no TBXTM Hub kit) 3 14 1/2" 22"
177305 Raker H.O. with Variable Vent Port (VVP) (no TBXTM Hub kit) 3 14 1/2" 24" Part
Number
177308 Raker H.O. with Variable Vent Port (VVP) (no TBXTM Hub kit) 3 14 1/2" 25" Index
Alphabetical
Index

Aluminum V6150-300 HP & 90-130 HP, 25 Shaft, 2-Stroke Propellers

Evinrude 177340 177341 Rx4TM with Variable Vent Port (VVP) (no TBXTM Hub kit) 4 15" 16"
E-TEC G2
177320 177321 Rx4TM with Variable Vent Port (VVP) (no TBXTM Hub kit) 4 15" 18"
Digital Shift
& Throttle 177326 177327 Rx4TM with Variable Vent Port (VVP) (no TBXTM Hub kit) 4 15" 24"
177328 Rx4TM with Variable Vent Port (VVP) (no TBXTM Hub kit) 4 15" 25"
177330 Rx4TM with Variable Vent Port (VVP) (no TBXTM Hub kit) 4 15" 26"
Digital
Gauges & 767683 G2 TBXTM bushing kit (POP) - Evinrude E-TEC G2 2015 thru
MWS
177283 TBXTM bushing kit (POP) - Evinrude/Johnson outboards V6 (1976
thru 2015)
SystemCheck
Aluminum V6 150-300 HP & 90-130 HP, 25 Shaft, 2-Stroke
Gauges
& MWS 15 Spline
90 & 115 HP Evinrude E-TEC, 25 Shaft, 2004 175 HP, 1977 thru V6 Gearcase
thru 185 HP, 1984 - 1985 Magnum
100 HP, 2004 thru 200 HP, 1976 thru Lighting
Portable 100 HP Commercial, 1984 thru 225 HP, 1986 thru Offshore
4-Stroke 120&140 HP, 1985 235 HP, 1978 - 1985
130 HP, 1995 - 1996 2.6 liter, 1984-1985
130 HP Evinrude E-TEC, 2009 - 2010 250 HP, 1991 thru
135 HP, 200 thru 275 HP, 1986 - 1988
140 HP (25), 1989 thru 300 HP, 1988 thru
i-Dock 150 & 155 HP Commercial, 1978 thru 3.6 liter, 1986-1987
Joystick 150-300 HP, Evinrude E-TEC, 2004 thru
System
Rigging 763453 Aluminum with Rubber hub 3 15 1/2" 13"

Accessories
765186 Aluminum with Interchangeable hub 3 15" 15"
765187 Aluminum with Interchangeable hub 3 14.8" 17"

Fuel & Oil
Systems 765189 Aluminum with Interchangeable hub 3 14.3" 21"
763470 Aluminum with Rubber hub 3 14.2" 23"
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Propellers Hydrus Propeller Exhaust Ring
Hydrus Propeller Exhaust Ring

Improves midrangge engine opperation and performance on Evinrude
Evinrude E-TEC 40, 50, 60, 75, and 90 HP engines. The E-TEC G2
Hydrus propeller exhaust ring should be used on gearcases
fitted with Hydrus propellers, part numbers 177201, 177202,
and 177203. If there are any questions refer to parts and
accessories bulletin 2005-01 (P).
Digital Shift
& Throttle
5006512
5006512 Hydrus Propeller Exhaust Ring 1
Digital
Gauges &
MWS
Ventilation Ring (for V-6 Only)
126669 ring should also be installed when severe ventilation is
experiencedwithservice-replacementgearcasesoron1993
2 0 V6 gearcases. Fits L and O - t y p e g e a r c a s e s o n l y ( n o t f o r SystemCheck
M a g n u m G e a r c a s e s ) . S e e S e r v i c e B u l l e t i n 2262 and 2003-OI-P Gauges
& MWS
126669
Portable
126669 Ventilation ring (see Service Bulletin 2003-OI-P) 1
346462 Exhaust ring for 3-blade standard hub props (for use with Magnum or M Type Gearcase - and all propellers except 1
Renegade) i-Dock
Joystick
350626 Ring, for use on Renegade Bass props on Magnum gearcases 1 System
Propeller Wrench
Non-floating propeller wrench for Evinrude and Johnson 50 Rigging
HP V4 20 outboards. Not for V6 outboards. Accessories
770242
Fuel & Oil
770242 Propeller wrench 1 1/16" 1
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Propeller Hardware Propellers
Propeller Hardware
Evinrude TBX Hardware
E-TEC G2
Thrust Spacer & Cotter Torsion Drive Kit
Description Years Nut spline
bushing washer pin sleeve
V6 Evinrude/Johnson All 128740 128764 398042 306394 128572 177282 177283
V6 Competitive Outboards All 128767 128765 n/a n/a 128572 177289 177288
Digital Shift
& Throttle 2Stroke, All 3 Blade Props
Prop kit Complete
Thr u st C oer
tt
Description HP Years Spacer Nut w/o thrust kit w/ thrust
bushing pin
bushing bushing
Digital 2Stroke 2035 1990thru 335420 323943 319891 320785 175268 n/a
Gauges & 2Stroke (2 Cyl Loop) 4060 1975thru 320305 315810 314503 314502 175267 386866
MWS
2Stroke (3 Cyl & V4) 60140 1971thru 127084 315810 314503 314502 175267 384573
2Stroke (Loop V4) 130 1995thru 126870 320570 398042 306394 175266 434153
2Stroke V6, Gear Case V-6 1989thru 126870 320570 398042 306394 175266 434153
SystemCheck 2Stroke (V6 & V8) 150 1991thru 126870 320570 398042 306394 175266 434153
Gauges
& MWS
Thrust Bushing - Propeller
Portable
4-Stroke
126870
i-Dock
128775 TBXTM Thrust Bushing 1
Joystick
System 128777 TBXTM Thrust Bushing 1
126870 Thrust Bushing 1

Rigging
Accessories 127212 Thrust Bushing 1
Fuel & Oil 320305 Thrust Bushing 1

Systems

Steering
Propellers 5032104 Thrust Bushing 1
Oil & 5033567 Thrust Bushing 1

Engine
Care 5033954 Thrust Bushing 1
765393 V4 Thrust Bushing - Aluminum Interchangeable Hub Kit 1

Reference
Drawings 765391 V6 Thrust Bushing - Aluminum Interchangeable Hub Kit 1
& Info
357130 G2 Thrust Bushing - Aluminum Interchangeable Hub Kit 1
Part
Number
Index
Alphabetical
Index

Propellers Spacer - Propeller
Spacer - Propeller
Evinrude
E-TEC G2

& Throttle
5033198 Spacer 1
3852350 Spacer 1
Digital
128764 TBXTM Spacer 1 Gauges &
MWS
323942 Spacer 1
315810 Spacer 5
128765 TBXTM Spacer 1 SystemCheck

Gauges
320570 Spacer 1 & MWS
5031552 Spacer 1
5030925 Spacer 1
Portable
5034638 Spacer 1 4-Stroke
323943 Spacer 1
5035461 Spacer 1
i-Dock
5032105 Spacer 1 Joystick
System
765394 V4 Aluminum Interchangeable Spacer 1
765392 V6 Aluminum Interchangeable Spacer 1
Rigging
Nut - Propeller Accessories
Fuel & Oil

Systems

318971 Nut 1
Steering
324694 Nut 1
5008966 Nut 1
314503 Nut 1
319891 Nut 1 Propellers

5030288 Nut 1
5030422 Nut 1
5032950 Nut 1 Oil &

Engine
5031826 Nut 1 Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Cotter Pin - Propeller Nut Propellers
Cotter Pin - Propeller Nut

Evinrude
E-TEC G2
305296
Digital Shift
& Throttle 320785 Cotter pin 5
306394 Cotter pin 10

Digital
Gauges & 328522 Cotter pin 5
MWS
5032996 Cotter Pin 1
SystemCheck 5030087 Cotter Pin 10

Gauges
& MWS
Propeller Nut Kit without Thrust Bushing
Portable
4-Stroke
i-Dock
Joystick
System
175267
Rigging
Accessories P/N Description Pack qty
175268 Prop kit w/o thrust bushing (POP) 20/35 HP 1
175269 Prop kit w/o thrust bushing (POP) 9.9/15 HP 1

Fuel & Oil
Systems
Propeller Nut Kit with Thrust Bushing

Steering
434153 Prop kit w/thrust bushing V6 1
386866 Prop kit w/thrust bushing 40-75 HP Small Gearcase 1
Propellers 5005034 Prop kit w/thrust bushing V4 Carb/DI/E-TEC 1
Torsion Sleeve - TBXTM Hub

Engine
Care 128572 TBXTM torsion sleeve 1
Drive Spline - TBX TM Hub

Reference
& Info
177289 TBXTM drive slpine - competitive outboards 1
177282 TBXTM drive slpine - Evinrude/Johnson outboards 1
Part 5009112 TBXTM drive slpine - EvinrudeE-TEC G2 outboards 1

Number
Index
Alphabetical
Index

Oil and Engine Care
Oil, XD100 TM
XD100TM synthetic formula oil provides uncompromising Evinrude
lubrication and superior performance - even in extreme E-TEC G2
conditions.
XD100TMoil is a premium formulation with synthetic additives that
delivers ultimate performance while providing the opportunity to
reduce oil consumption. If an authorized dealer programs an
Evinrude E-TEC outboard EMM to use XD100 TM oil, you can Digital Shift
reduce normal oil consumption compared to using a conventional & Throttle
oil. Only an authorized Evinrude dealer can program your
engine for this benefit.
Uncompromised lubrication -XD100 TM is specifically formulated
for Evinrude E-TEC, Evinrudedirect injection and oil
injection outboards Digital
Ultimate lubricity for reduced friction and wear Gauges &
MWS
Maximum detergency for reduced combustion deposits
Smokeless, odorless, and ashless 764357
P/N Description Pack qty Case weight Qty full pallet
SystemCheck
765146 XD100TM , Quart 12 24 lbs. 864 Gauges
& MWS
764357 XD100TM , Gallon 3 45 lbs. 180
777119 XD100TM , 2.5 Gallon 2 40 lbs. 80
763716 XD100TM , 5 Gallon 1 40 lbs. 36

Portable
4-Stroke
764358 XD100TM , 16 Gallon 1 131 lbs. 5
777120 XD100TM , 55 Gallon 1 450 lbs. 4
764359 XD100TM , Empty Gallon 30

i-Dock
Joystick
System
Oil, XD50 TM Synthetic Blend
XD50 TM is a performance enhanced synthetic blend oil that
meets the specific demands of direct injection outboards and
2-Stroke outboards that specify TC-W3 certified oils.
Reduced smoke for cleaner operation Rigging
Protects against wear with superior lubricity Accessories
Contains combustion cleaner to keep carbon in suspension and
away from critical engine components
XD50 TM should be used in high load and performance
applications for greater dependability, reliability and reduced
maintenance Fuel & Oil
Formulated for extreme weather conditions, works down to 0F Systems
(-17C)
764354
Steering
P/N Description Pack qty Case weight Qty full pallet
764352 XD50TM, Pint 24 25 lbs. 1296
764353 XD50TM, Quart 12 25 lbs. 864
764354 XD50TM, Gallon 3 50 lbs. 180 Propellers
777226 XD50TM, 2.5 Gallon 2 40 lbs. 80
777227 XD50TM, 5 Gallon 1 40 lbs. 36
764355 XD50TM , 16 Gallon 1 131 lbs. 5 Oil &

Engine
777228 XD50TM, 55 Gallon 1 450 lbs. 4 Care
764356 XD50TM, Empty Gallon 30
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Triple-Guard Marine Grease Oil and Engine Care
Triple-Guard Marine Grease

Evinrude Triple-Guard is a tough grease that stays in place and is
E-TEC G2 unaffected by vibration, saltwater, or cold temperatures.
Reformulated - higher water resistance and improved adhesion
to metal
Ideal for owner engine maintenance
Won't swell seals, packing or O-rings
Digital Shift Compatible with other greases
& Throttle Totally waterproof to prevent water wash-off
Not for use in wheel bearings or universal joints
Digital
Gauges & 508298
MWS

508298 Triple-Guard, 8 oz Tube 12
SystemCheck
Gauges 775776 Triple-Guard, 14 oz Cartridge 12
& MWS
775777 Triple-Guard, 1 lb Container 6
Note: Order in multiples of dealer pack quantities.

Portable
4-Stroke Gearcase Lubricant, HPF PRO TM
HPF PRO TM is the high performance alternative to HPF XR TM
gear lubricant.
i-Dock Use HPF PRO TM gear case lubricant for high performance
Joystick outboards, commercial fleets, rental operations and stern drives.
System A high-viscosity blend of enhanced friction reducers, anti-foam
agents, and synthetic E-P additives systematically deliver
exceptional durability and reliability with ultimate film strength.
Marine-specific inhibitors and emulsifiers deliver unequaled
protection against corrosion and lubricant breakdowns caused
Rigging by water intrusion. HPF PRO TM .
Accessories
Follow the procedures specified in the owner's manual or service
778755
manual for gearcase lubricant service.
Promotes long gearcase life in marine use, especially in severe
duty applications
With optimized viscosity runs 24% to 29% cooler compared to
Fuel & Oil
Systems
Ultra-HPF TM , plus it emulsifies water and won't foam

778754 HPF PROTM Lube kit (POP) 6
778755 HPF PROTM , 32 oz 12

Steering
Anti-Corrosion Spray
Evinrude/Johnson Parts and Accessories anti- corrosion
spray is a heavy, waxy coating specifically designed to protect
Propellers your engine from rust and corrosion in the hostile marine
environment. Our Anti- Corrosion Spray treatment has benefitted
from extensive product testing which has resulted in superior
protection. It is highly effective against corrosion caused by salt
water and salt spray.
Oil &
Engine
Care
Reference 777193
Drawings
& Info P/N Description Pack qty
777193 Anti-Corrosion Spray, 11 oz Spray Can 12
Part
Number
Index
Alphabetical
Index

Oil and Engine Care 2 + 4 Fuel Conditioner
2 + 4 Fuel Conditioner
Protects the complete fuel system, conditions fuel, and extends Evinrude
useful shelf life when added to fresh fuels. E-TEC G2
All operator and service literature encourages the use of 2 +
4 fuel conditioner, for day-to-day operation, particularly during
periods of engine non-use. Gasoline, as purchased at the
pump, has a guaranteed shelf life of three months. 2 + 4 fuel
conditioner extends the useful life of fuel in a number of ways. Digital Shift
Metal deactivators - to render brass or copper alloy chemically & Throttle
inactive toward gasoline
Anti-oxidants - to slow the chemical breakdown of gasoline
Double strength - treats more fuel per ounce
Corrosion inhibitors - to help reduce long term corrosion of
metal fuel system components Digital
Dryers - to absorb and isolate moisture in the fuel system Gauges &
766209 MWS
Concentrated formula - 8 oz. treats 32 gallons, 16 oz. treats
64 gallons, 32 oz. treats 128 gallons
SystemCheck
766216 2 + 4 Fuel Conditioner, 8 oz Bottle 12 Gauges
& MWS
766209 2 + 4 Fuel Conditioner, 16 oz Bottle 12
766210 2 + 4 Fuel Conditioner, 32 oz Bottle 12
766211 2 + 4 Fuel Conditioner, 55 Gallon 1

Portable
4-Stroke
Note: Order in multiples of dealer pack quantities.
Paint
Factory Matched to Your Evinrude or Johnson Outboard i-Dock
or Drive System. Refer To Individual Engine Parts Book For Joystick
Specific Color Application. System
For best results, please review service bulletin 2275.

Adequate mixing is required agitate for one full minute. Let
can stand upside down for one to two minutes. Then agitate
for another minute. Rigging
Proper mixing and at least four coats are required to come Accessories
close to matching original paint.
Can only be shipped ground transportation.
Fuel & Oil

Systems
351907 Evinrude E-TEC 2005-thru Base coat Dark Blue
Spectracron
777171 Evinrude E-TEC 1981-thru Base coat White Steering

777177 Evinrude E-TEC 1998-AB Base coat Graphite/
Smoke
777175 1992-2005 Metallic Blue
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Paint Oil and Engine Care
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info
Credit
We will be pleased to extend credit privileges to those customers who qualify. To apply for open credit, please complete our credit Evinrude
application form which is included in this catalog or can be acquired by contacting us, and attach current financial statement E-TEC G2
and information as stipulated on the Credit Application. Orders will be shipped on a cash in advance basis until a credit line has
been established. Once credit is established, periodic updates of credit information will be required.
Prices Digital Shift

Prices subject to change without notice and orders will be billed at prices in effect at the time of shipment. & Throttle
Payment Terms
Open account terms are available on net 15th proximately (payment due on the fifteenth (15th) day of each month for shipments through Digital
the last billing day of the prior month). Continuing open account terms will be granted only to those customers who continue to be Gauges &
current in their regular open account. In addition, BRP US Inc. reserves the right at any time to require open account customers, as a MWS
condition of continuing to be dealt with on an open account basis, to execute necessary documents to secure BRP US Inc. financial
interests in customer's open account. All other customer accounts will be placed on a prepayment basis.
If any amount on the customer's regular open account or dating order becomes past due and owing, in the event of a bulk sale or transfer
of ownership, or in the event that any dealer agreement between BRP US Inc. and the dealer expires or is cancelled, BRP US Inc. shall SystemCheck
have the right, at its option and without prior notice to the customer, to declare all amounts and balances owed to BRP US Inc. under any Gauges
dating term account of the customer to be immediately due and payable, together with any amount past due and owing on the regular & MWS
open account, all of which amounts shall then be subject to the service fee stated herein.
In the event any amount becomes past due and owing on the customer's regular open credit account, BRP US Inc. shall have the right to
apply all credits, monies, balances or property of the customer held by BRP US Inc. and owed to the customer to the amount past
due and owing on the customer's regular open credit account. The past due amounts of all accounts not paid in accordance with the
terms set forth above shall be charged a service fee at the maximum rate permitted by law, not to exceed 1 1/2% per month (18% per Portable
4-Stroke
annum). There will be a $25.00 charge on returned checks.
Damaged Shipments
Please notify carrier (Motor Freight, UPS, Parcel Post) when you receive a damaged shipment, or suspected damaged shipment. i-Dock
Joystick
System
Shipment Shortages, Incorrect Parts and Non-receipt
Please phone in shortages and discrepancies to PAC customer service at (800) 888-4662 (option 1). Do not reorder parts in hopes that
the correct part will arrive as we aim to have all customers receive the correct parts they order.
Shipments are considered complete if shortage is not reported within 10 days of receipt. Rigging
Accessories
Propeller Exchange Program
The Propeller Exchange Program allows you to exchange new, current Evinrude/Johnson propellers on a dollar for dollar basis
for propellers of a different style or size. The program covers propellers purchased from Evinrude/Johnson within the last 12
months, as well as propellers received with new engines. Propeller exchanges under this program may be made at any time during
the year and as often as you require. Fuel & Oil
Systems
1. Return the propeller you want to exchange on an RCM form to BRP US Inc. Beloit, WI facility. In the box with the RCM form should
be an order for the new propeller. When received, BRP US Inc. will credit you for the propeller returned and we will generate an
order for the propeller requested. We will accept new, unused Evinrude/Johnson propellers with a stock activity code of 1, 2, 3 or
4 (see your current Master Parts Price Book for activity codes).
2. Returned propellers must be shipped to BRP US Inc. proper facility in new, unused and resaleable condition. Propeller must be in
the undamaged, original propeller carton. Propellers that are shipped with engines that do not have a box, must be carefully Steering
packaged so they will not be marred or damaged in shipment. Any props returned that are not packaged or the boxes damaged will
be charged a nominal reboxing fee. All propeller returns must be shipped freight prepaid to BRP US Inc.
3. If you have any questions regarding the propeller exchange program, please contact our dealer support group in Sturtevant, WI
(800) 888-4662 (option 1).
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Returns Reference Drawings & Info
Returns
Evinrude 1. All defective parts covered under warranty should be handled by a warranty claim submitted via BOSSWeb or using p/n 773629,
E-TEC G2 submitted to the Warranty Department at Box 597, Sturtevant, WI 53177. Parts returns should be submitted at 10101 Science
Drive, Sturtevant, WI 53177.
2. All returns unrelated to warranty must be freight prepaid to the Beloit distribution center.
BRP US Inc., Attn.: Returns, 3225 N. Prairie Avenue, Beloit, WI 53511
3. All returns must be in original parts packaging and in good resalable condition. Items needing to be re-boxed will be completed at a
Digital Shift small charge to the dealer.
& Throttle 4. The following items are not returnable:
a. Literature
b. Drop ship items (custom motor brackets, cloth motor covers, shrink wrap, etc.) Please contact customer service at (800)
888-4662 (option 1) if you have any problems with a drop ship items.
Digital
Gauges & c. Superseded, obsolete and discontinued parts (Activity code 7 in the Master Parts Price Book).
MWS
d. Electronic items that have been previously installed.
5. Handling Returns (except for Vintage Parts)
SystemCheck a. Parts can be returned freight prepaid to the Beloit distribution center if returned within 90 days of receipt. However, parts listed in
Gauges item #4 above are not returnable, even within this 90 day period. Vintage Parts are not covered by this 90 day return policy and
& MWS Allied Lines of marine accessories are returnable only according to the conditions below. Parts with activity codes of 1, 2 or 3
at the time of return (check latest Master Parts Price Book) can be sent back with no restocking charge. Parts with activity
codes of 4,5 and 6 may be returned with a restocking charge of 15% of the original invoice price. Any parts to be returned
after 90 days of receipt will require written approval (Return Authorization Form) from BRP US Inc. prior to the return of the
merchandise and will be subject to a 15% restocking fee. All other items should be returned on a standard RCM form P/N #11111
Portable
4-Stroke and shipped freight prepaid to the Beloit, WI distribution center.
i. Canadian returns must be shipped to: Bombardier Recreational Products, c/o Affiliated Global Logistics c/o Transplus
Toronto, 7385 Bren Road, Unit 3, Mississauga, Ontario L4T 1H3.
ii. All shipments to the customs broker must be freight prepaid by the dealer.
i-Dock
Joystick iii. Please note, due to Border/Customs issues, credit may take up to 90 days to appear on your statement.
System
b. Allied lines of marine accessories may be returned to BRP US Inc. within 90 days of receipt and without approval from BRP US
Inc. ONLY if the wrong item was shipped. In all other cases, the return must be in writing by BRP US Inc..
6. Vintage Parts Returns
Rigging a. Return of Vintage Parts is allowed under the following circumstances:
Accessories
i. Vintage Part was damaged when received
ii. Vintage Part was not new when received
iii. Wrong Vintage Part was shipped
Fuel & Oil
Systems iv. Returns must be made within 30 business days, in original packaging and must include a copy of the original packing slip.
b. U.S. dealer ship to: Vintage Parts, 6306 202nd Street SW, Lynwood, WA 98036
Stock Activity Code Explanation
1. Most active part: should be considered as regular stock item.
2. Fast-moving part: should be considered as regular stock item by most dealers.
Steering
3. Less active part: should be stocked according to demand.
4. Slow-moving part: order only as needed.
5. Very slow-moving part: order only as needed.
6. For special order.
7. Obsolete and not available, and not returnable.
Propellers
Ordering Information
Please specify quantity first then part number when ordering merchandise. This will enable us to give you prompt, efficient service.
All orders received are subject to acceptance and approval.
Vintage Parts shipped to Canada will incur duty and brokerage fees.
Oil & Cash-In-Advance Customer Freight Charge - 8% Shipping and Handling.
Engine
Care
BOSSWeb Ordering
A computerized dealer support system, BOSSWeb, is available to provide authorized dealers with part availability inquiry, backorder
status checking, and order entry capability. Contact your district sales manager, OEM regional sales director or customer service
Reference representative for details and a demonstration. Call customer service [(800) 888-4662 option 1] with any questions.
Drawings
& Info
BOSSWeb Emergency Orders
Use EM order type (Process Code/Order Type)
$15.00 priority handling fee (6 line maximum)
Part
Number
Index Emergency Orders
Call (800) 888-4662 (option 1)
$15.00 priority handling fee (6 line maximum)
Alphabetical Regular Order

Index
Orders placed on BOSSWeb website by 12:30 PM (time of our distribution facility) are shipped the same day.
BOSSWeb orders left on hold will automatically release to the warehouse overnight for processing 10 PM (CST).

Reference Drawings & Info Customer Service Hours
Customer Service Hours

Evinrude
Parts & Accessories Sales (option 1) E-TEC G2
8:00 AM-5:00 PM (Central Standard Time)
Parts & Accessories Technical Service & Warranty (option 2)

8:00 AM-4:30 PM (Central Standard Time)
Credit or Accounts Receivable Digital Shift

8:00 AM-Noon and 1:00-5:00 PM (Central Standard Time) & Throttle
Important Numbers
Engine & PAC Sales (800) 888-4662, option 1
Digital
Evinrude & Rotax Warranty & Technical Support (800) 888-4662, option 1 Gauges &
Credit (800) 888-4662, option 3 MWS
Online Technology Support - BOSSWeb (800) 8884662, option 4
Credit FAX (262) 884-5466
PAC FAX (800) 360-1100
Retail Customer Service (844) 345-4BRP (4277)
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

BRP US INC. LIMITED WARRANTY Reference Drawings & Info
BRP US INC. LIMITED WARRANTY

Evinrude Evinrude/Johnson GENUINE PARTS AND ACCESSORIES SOLD IN THE
E-TEC G2
UNITED STATES AND CANADA
BRP US Inc.* (BRP) warrants its Evinrude/Johnson Genuine Parts and accessories (Product) sold by authorized Evinrude
or Johnson dealers in the fifty United States and Canada from defects in material or workmanship for the period and under the
conditions described below. This limited warranty does not apply to Products not bearing the Evinrude or Johnson trademarks
Digital Shift that are made by other manufacturers. This limited warranty extends to the original retail purchaser only (Purchaser) and is not
& Throttle
transferable to any subsequent owner. This warranty is available only on Products purchased as new and unused from a dealer
authorized to distribute the Products in the country in which the sale occurred (Dealer).
Aluminum propellers, plastic propellers, stainless steel propellers, Snap-In control cables and Dura-Tank TM fuel tanks are warranted
Digital for THIRTY-SIX (36) CONSECUTIVE MONTHS from the date of purchase.
Gauges & ICON TM engine control systems and components are warranted for THIRTY-SIX (36) CONSECUTIVE MONTHS from the date
MWS of purchase.
Powerhead assemblies are warranted for a period of TWELVE (12) CONSECUTIVE MONTHS from the date of purchase.
All other Products are warranted for a period of TWELVE (12) CONSECUTIVE MONTHS from the date of purchase unless
purchased at the time of the engine sale and listed on the Bill of Sale (BOS).
SystemCheck Evinrude/Johnson Genuine Parts accessories sold and rigged by an authorized Evinrude or Johnsondealer in the fifty United
Gauges States and Canada and listed on the BOS at the time of the engine sale will carry the same THIRTY-SIX (36) CONSECUTIVE
& MWS MONTH warranty as the BRP US INC. LIMITED WARRANTY FOR Evinrude OUTBOARD ENGINES. Consumers must retain their
BOS and present it to the servicing authorized Evinrude or Johnsondealer in order for the accessory warranty to be valid.
All products purchased for COMMERCIAL USE, or used commercially at any time during the warranty period, are warranted for
TWELVE (12) CONSECUTIVE MONTHS from the date of purchase. Product is used commercially when it is used in connection
with any work or employment that generates income, during any part of the warranty period. Product is also used commercially
Portable when, at any point during the warranty period, it is installed on a boat that has commercial tags or is licensed for commercial use.
4-Stroke
Limited Warranty for Allied Lines of Marine Accessories (not branded by Evinrude or Johnson
Certain marine accessories in the Evinrude/Johnson Genuine Parts and Accessories Catalog are not sold under the Evinrude
i-Dock
or Johnsonbrand names. These allied lines of marine accessories are located in the rear of the catalog and are identified by
Joystick manufacturer or brand names (e.g. Teleflex, Perko, etc.). Warranty and product support for these marine accessories that are
System not branded byEvinrude or Johnson will be administered by the respective manufacturer. All inquires to BRP US Inc. regarding
these marine accessories will be directed to the proper manufacturer. To ensure faster and more direct response to warranty and
product issues for these marine accessories please refer to the enclosed list and contact information. DO NOT return defective
items or file a warranty claim with BRP US Inc. Warranty Department. Please contact the manufacturer directly. All of the marine
accessories sold through this catalog come with a warranty established by the manufacturer. Statements of those warranties can
Rigging be found on the packaging material packed with the product.
Accessories
Vintage Parts
Parts identified as Vintage Parts in the catalog and in the BRP US Inc. Master Parts Price Book are not covered by BRP US Inc.
Limited Warranty for Evinrude/Johnson Genuine Parts and Accessories. Vintage Parts are sold without warranty, but may be
Fuel & Oil returned in certain circumstances. See the section on returns for conditions on return of Vintage Parts.
Systems
The following are not warranted under any circumstances: (a) normal wear and tear; (b) routine maintenance items including, but not
limited to, adjustments, oil changes, water pumps, carburetor maintenance, spark plug replacements, etc.; (c) cosmetic damage or
paint changes due to exposure to the elements; or (d) damage caused by: improper or lack of installation, maintenance, winterization
and/or storage; failure to follow the procedures and recommendations in the Operators Guide; removal of parts, improper repairs,
service, maintenance, or modification; use of parts or accessories not manufactured or approved by BRP that are either incompatible
Steering with Product or adversely affect its operation, performance, or durability; repairs done by anyone, including Purchaser, other than
an authorized Dealer; abuse, misuse, abnormal use, neglect, racing, improper operation or operation of Product in a manner
inconsistent with the Operators Guide; external damage, accident, submersion, water ingestion, fire, theft, vandalism or act of
God; operation with fuels, oils or lubricants not suitable for use with Product (see Operators Guide); rust or corrosion; or cooling
system blockage by foreign material.
Propellers This warranty will be voided in its entirety and rendered null and void: (a) where Product has been altered or modified in such a way
so as to adversely affect its operation, performance or durability, or has been altered or modified to change its intended use; or (b)
where Product is or has been used for racing or any other competitive activity, at any point.
ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY
Oil & OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE LIFE OF THIS EXPRESS LIMITED
Engine WARRANTY. ALL INCIDENTAL, CONSEQUENTIAL, DIRECT, INDIRECT OR OTHER DAMAGES OF ANY KIND ARE EXCLUDED
Care FROM COVERAGE UNDER THIS WARRANTY INCLUDING, BUT NOT LIMITED TO: expense for gasoline, expense for transporting
Product to and from Dealer, removal of Product from a boat and reinstallation, mechanics travel time, in-and-out of water charges, slip
or dock fees, trailering or towing, storage, telephone, cell phone, fax or telegram charges, rental of a like or replacement Product
or boat during warranty services or down time, taxi, travel, lodging, loss of or damage to personal property, inconvenience, cost of
Reference insurance coverage, loan payments, loss of time, income, revenue, profits, enjoyment or use of Product.
Drawings
& Info SOME JURISDICTIONS DO NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR OTHER EXCLUSIONS IDENTIFIED ABOVE. AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT MAY VARY FROM JURISDICTION
TO JURISDICTION.
Part
Number Purchaser must bring the Product, including any defective part therein, and proof of purchase of the Product (original bill of sale) to
Index Dealer promptly after the appearance of the defect and, in any event, within the warranty period. Purchaser must sign the repair/work
order prior to repair to validate warranty coverage and must provide BRP/Dealer with a reasonable opportunity to repair/replace the
defective part. All replaced parts become the property of BRP.
Alphabetical
Index

Reference Drawings & Info
BRPs obligations under this warranty are limited to, at its sole discretion, repairing or replacing parts of Product found to be defective
in material or workmanship, in BRPs reasonable judgment. Repair or replacement of parts will be without charge for parts and
Evinrude
labor, at any authorized Dealer. No claim of breach of warranty shall be cause for cancellation or rescission of the sale of Product E-TEC G2
to Purchaser. BRP reserves the right to improve, modify or change Products without assuming any obligation to modify Products
previously manufactured. If warranty service is required outside of the fifty United States or Canada, Purchaser will bear responsibility
for any additional charges due to local practices and conditions including, but not limited to, freight, insurance, taxes, license fees,
import duties, and any financial charges levied by governments, states, territories and agencies.
No distributor, Dealer or any other person is authorized to make any affirmation, representation or warranty regarding Product other Digital Shift
& Throttle
than those contained in this limited warranty and, if made, shall not be enforceable against BRP. BRP reserves the right to modify this
warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Products sold
while this warranty is in effect. For assistance, please contact BRP US Inc. Consumer Support, P.O. Box 597, 10101 Science Drive,
Sturtevant, WI 53177, 1-844-345-4BRP (4277) or visit www.brp.com .
Digital
The Limited Warranty applies only to Products purchased as new and unused from a distributor or dealer authorized to distribute Gauges &
Products in the country in which the sale occurred. MWS
If warranty service is required outside of the country of original sale, Purchaser bears responsibility for any and all charges due to local
practices and conditions that exceed or are in addition to customary charges in the country of sale, such as, but not limited to, freight,
insurance, taxes, license fees, import duties, and any financial charges levied by governments, states, territories and agencies.
SystemCheck
Gauges
For assistance, please contact BRP US Inc. Consumer Support, P.O. Box 597, 10101 Science Drive, Sturtevant, WI 53177, & MWS
1-844-345-4BRP (4277), or the affiliate of BRP Inc. where the Product was sold to the retail Purchaser.
No other change to the Limited Warranty shall be made or implied.
Effective as of July 1, 2011.
Portable
4-Stroke
* In Canada, products are distributed and serviced by Bombardier Recreational Products Inc.
Registered trademark of Bombardier Recreational Products Inc. or its affiliates.
2016 BRP US Inc. All rights reserved. i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Connection Diagram - ICONTM One Engine, One Station Reference Drawings & Info
Connection Diagram - ICON TM One Engine, One Station

Evinrude Concealed Side Mount Remote Control
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info Connection Diagram - ICON TM One Engine, One Station
Connection Diagram - ICON TM One Engine, One Station

Single Lever Binnacle Mount Control Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Connection Diagram - ICONTM One Engine, Two Stations Reference Drawings & Info
Connection Diagram - ICON TM One Engine, Two Stations

Evinrude Single Lever Binnacle Mount Control
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info Connection Diagram - ICON TM Two Engines, One Station
Connection Diagram - ICON TM Two Engines, One Station

Dual Lever Binnacle Mount Control Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Connection Diagram - ICONTM Two Engines, Two Stations Reference Drawings & Info
Connection Diagram - ICON TM Two Engines, Two Stations

Evinrude Dual Lever Binnacle Mount Control
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info Connection Diagram - ICONTM Three Engines, One Station
Connection Diagram - ICON TM Three Engines, One Station

E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Connection Diagram - ICONTM Three Engines, Two Stations Reference Drawings & Info
Connection Diagram - ICON TM Three Engines, Two Stations

E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info Connection Diagram - ICON TM Four Engines, One Station
Connection Diagram - ICON TM Four Engines, One Station

E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Connection Diagram - ICONTM Four Engines, Two Stations Reference Drawings & Info
Connection Diagram - ICON TM Four Engines, Two Stations

E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info I-CommandTM Sample Network Diagram
I-CommandTM Sample Network Diagram

Single Outboard - Example Diagram Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

I-CommandTM Sample Network Diagram Reference Drawings & Info
I-CommandTM Sample Network Diagram

Evinrude Dual Outboard - Example Diagram
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info Profile Drawing - Concealed Side Mount
Profile Drawing - Concealed Side Mount

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Profile Drawing - Single Lever Binnacle with Key Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Profile Drawing - Single Lever Binnacle without Key Reference Drawings & Info
Profile Drawing - Single Lever Binnacle without Key

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Profile Drawing - Dual Lever/Dual Engine Binnacle

Fuel & Oil
Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Reference Drawings & Info Profile Drawing - Oil Tanks
Profile Drawing - Oil Tanks

Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Profile Drawing - Oil Tanks Reference Drawings & Info
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index

Part Number Index
862 152 175267 186 314502 186

76124 119 175268 186 314503 185
Evin rude
121828 148 175269 186 315810 185
E-TEC G2
121829 147 175293 160 316153 161
124249 163 175310 102 317893 141
126669 183 175322 166 318272 129
126870 184 175622 106 318273 129 I
127084 184 175719 103 318322 141
Digital Shift
127212 184 175740 147 318572 129
& Throttle
127287 143 175963 108 318573 129
127288 143 176108 119 318966 184
127292 143 176109 119 318971 185
127468 143 176110 119 319890 184
127484 143 176111 119 319891 185 Digital
127591 68,95 176112 119 320107 141 Gauges &
127592 68,95 176113 119 320248 129 MWS
127593 68,95 176114 119 320305 184
127595 68,95 176115 119 320570 185
128572 186 176116 119 320785 186
128764 185 176117 119 322652 163 SystemChecl
128765 185 176118 119 322653 163 Gauges
128775 184 176119 119 322654 163 & MWS
128777 184 176120 119 323716 142
172114 103,105,107,109 176122 119 323942 185 111
172877 137 176126 119 323943 185
172878 137 176287 68,95 324694 185 Portable
172879 137 176288 68,95 324825 163 4-Stroke
173011 79,100 176295 143 328522 186
173012 79,100 176296 143 329653 163
173013 79,100 176299 143 329654 163
173014 79,100 176333 94 331578 129
173015 79,100 176334 94 333592 184 i-Dock
Joystick
173016 79,100 176335 94 334590 184
System
173017 79,100 176339 94,118,120 334913 155
173018 79,100 176340 94,118,120 335420 184
173019 79,100 176341 94,118,120 336414 184
173020 79,100 176342 94,118,120 336545 133
173105 79,100 176408 68,95,118,120 336676 129 Rigging
173106 79,100 176410 68,95 342672 137 Accessories
173107 79,100 176461 24,55,81,112,153 343912 133
173108 79,100 176509 143 346150 161
173109 79,100 176529 143 346151 161
173110 79,100 176534 23,73,96,129-130 346152 161
173111 79,100 176588 23,73,96,130 346462 183 Fuel & Oil
173112 79,100 176711 94 346785 161 Systems
173113 79,100 176715 94 346786 161
173114 79,100 176716 94 346930 161
173115 79,100 176717 94 346931 161
173116 79,100 176718 94 347107 161
173117 79,100 177046 102 347108 161
Steering
173118 79,100 177047 102 348838 161
173119 79,100 177088 102 348839 161
173120 79,100 177107 102 349516 161
173273 32,57,83,114,156 177201 180 349729 161
173274 32,57,83,114,156 177202 180 350281 139
173275 32,57,83,114,156 177203 180 350626 183 Propellers
173311 31,57,83,114,155 177282 186 350860 161
173312 32,57,83,114,155 177283 177,181 351061 189
173550 137 177288 177 352868 161
173623 148 177289 186 354101 129
174176 31,56,82,113,154 177304 181 354102 129
Oil &
174179 32,57,83,114,156 177305 181 354103 129 Engine
174629 102 177306 181 354104 129 Care
174646 147 177307 181 354717 137
174653 68,95,118,120 177308 181 357130 184
174656 147 177320 181 357667 138
174658 147 177321 181 357717 138 Reference
174693 68,95,148 177322 181 385407 135 Drawings
174818 102 177323 181 386866 186 & Info
174819 102 177324 181 396748 137
174820 102 177325 181 434153 186
174970 147 177326 181 434367 138
174985 102 177327 181 437955 139 Part
175114 103 177328 181 500055 141 Number
175145 102 177330 181 500056 141 Index
175146 102 177340 181 500058 142
175149 103 177341 181 500059 142
175172 166 305296 186 500060 141
175173 166 306394 186 500080 141
175238 148 307238 129 500081 141 Alphabetical
Index
175266 186 313623 129 500082 141
Part Number Index
500083 141 509786 142 763868 93

500084 141 514679 143 763910 181
Evin rude
500085 141 514680 143 763911 181
E-TEC G2
500086 141 514681 143 763912 181
500087 141 514682 143 763913 181
500088 141 514683 143 763914 181
500090 141 514684 143 763915 181
500093 163 514685 143 763916 181
Digital Shift
500094 163 514686 143 763917 181
& Throttle
500095 163 514687 143 763918 181
500096 163 514688 143 763919 181
500098 163 514696 143 763920 181
500099 163 514697 143 763921 181
Digital 500100 163 584348 134 763922 181
Gauges & 500101 141 584349 134 763923 181
MW1111 502224 136 584381 134 763924 181
502226 136 585069 134 763925 181
502271 146 585076 134 763929 180
502272 146 587173 29 763930 180
SystemChecl 502287 146 587174 29 763931 180
Gauges 502288 146 587175 29 763932 180
& MWS 502289 146 587176 29 763936 181
502300 146 587177 29 763937 181
502301 146 587178 29 763938 181
502310 146 587179 29 763939 181
Portable 502311 146 587180 29 763940 181
4-Stroke 502312 146 587181 29 763941 181
502313 146 587182 29 763942 181
i-Dock
Joystick
1 502314
502315
502316
502317
146
146
146
146
587183
587185
587186
587205
30
30
30
6,9,11,13,15
763943
763944
763945
763946
181
181
181
181
502318 146 587214 139 763947 181
System
502324 146 587230 15 763948 181
502325 146 587279 43 763949 181
Rigging
Accessories
1 502326
502327
502328
502329
146
146
146
146
587280
587301
587302
763300
43
6,9,11,13,15
6,9,11,13,15
180
763950
763951
763952
763953
180
180
180
180
502330 146 763301 180 763954 180
I 502331 146 763453 182 763956 180
1 502346
502347
136
136
763470
763486
182
179
763957
763959
180
181
Fuel & Oil 502348 136 763543 67 763960 181
Systems 502349 136 763544 67 763961 181
4
502350 136 763545 67 763962 181
IIIII 502518 136 763546 67 763963 181
502519 136 763548 67 763964 180
502520 136 763549 67 763965 180
502521 136 763552 67 763966 180
Steeri
502522 136 763553 67 763967 180
502523 136 763645 135 763968 180
502551 144 763646 135 763984 181
502552 144 763647 135 763985 181
I 502905 31,56,82,113,154 763648 135 763986 181
Propellers 502928 136 763649 135 763987 181
502929 136 763650 135 763988 181
503243 144 763691 170 763989 181
503955 134 763716 187 763990 181
503956 134 763737 24,53,80,151 763991 181
503957 134 763847 89 763992 181
Oil &
Engine 504042 133 763848 90 763993 181
Care 504043 133 763849 89 763994 181
504044 133 763850 91 763995 181
504045 133 763851 92 763996 181
504046 133 763852 90 763997 181
Reference 504278 130 763853 89 763998 181
Drawings 504280 130 763854 91 763999 181
& Info 504281 96 763855 92 764000 181
504300 134 763856 93 764001 181
504301 134 763857 93 764012 49,69
504311 149 763858 89 764013 49,69
Part 504824 144 763859 90 764015 105
Number 507197 142 763860 89 764016 107
Index 507198 142 763861 91 764017 105
508298 188 763862 92 764018 107
508363 133 763863 90 764040 107
508364 133 763864 89 764041 107
508365 133 763865 91 764043 107
Alphabetical 508366 133 763866 92 764044 108
Index I
509785 142 763867 93 764045 107
Part Number Index
764046 108 764258 50,72, 111 765178 179

764052 108 764259 50,72, 111 765179 179
Evin rude
764059 107 764260 50,72, 111 765180 179
E-TEC G2
764060 108 764261 50,72, 111 765181 180
764071 105 764262 50,72, 111 765182 180
764072 105 764263 50,72, 111 765183 180
764073 105 764264 50,72, 111 765184 180
764074 106 764265 50,72, 111 765185 180
Digital Shift
764075 105 764266 50,72, 111 765186 182
& Throttle
764076 106 764267 50,72, 111 765187 182
764081 106 764268 50,72, 111 765188 182
I .
764085 105 764269 50,72, 111 765189 182
764086 105 764271 23, 53,80, 151 765190 178
764087 105 764272 23, 53,80, 151 765192 178 I Digital
764088 106 764273 23, 53,80, 151 765193 178 Gauges &
764089 105 764274 23, 53,80, 151 765194 178 !
MWS
764090 106 764275 53,80, 151 765195 178
764115 78,99 764308 106 765196 178
764116 78,99 764309 64 765197 178
764117 78,99 764310 64 765198 178 SystemChecl
764118 78,99 764311 65 765199 178 Gauges
764119 78,99 764312 65 765200 178 & MWS
764120 78,99 764313 66 765311 54,80, 152
764121 78,99 764315 51,75 765312 54,80, 152
764122 78,99 764352 187 765313 54,80, 152
764123 78,99 764353 187 765391 184 Portable
764124 78,99 764354 187 765392 185 4-Stroke
764125 78,99 764355 187 765393 184
764126 78,99 764356 187 765394 185
764128 78,99 764357 187 765439 104
764130 78,99 764358 187 765459 150
764132 78,99 764359 187 765513 20, 48, 71 i-Dock
Joystick
764134 78,99 764593 49,69 765514 20, 48, 71
System
764136 78,99 764594 49,69 765515 20, 48, 71
764138 78,99 764595 49,69 765518 165
764140 78,99 764640 49,69 765524 165
764142 78,99 764641 49,69 765528 165
764144 78,99 764671 20-21, 48, 52, 71, 75 766105 20, 48, 71 Rigging
764146 78,99 764672 20-21, 48, 52, 71, 75 766106 20, 48, 71 Accessories
764148 78,99 764673 20-21, 48, 52, 71, 75 766107 20, 48, 71
764150 78,99 764921 44 766144 20, 48, 71 I
764151 22, 53, 76 764943 30,44 766159 20, 46, 70
764155 50,73 764944 44 766160 19,46,70
764157 73 764945 44 766163 20, 46, 70 Fuel & Oil
764159 73 764946 44 766164 20, 46, 70 Systems
764161 21, 51, 74 764947 44 766165 20, 46, 70
764162 21, 51, 74 764948 44 766166 19,46,70
764163 21,51,74 764949 44 766171 20, 47, 71
764164 73 764950 44 766172 20, 47, 71
764166 74 764951 44 766173 20, 47, 71
Steering
764177 49,69 764967 44 766174 20, 47, 71
764181 51,75 765038 52,74 766175 20, 47, 71
764183 22, 53, 76 765048 179 766176 20, 47, 71
764193 20, 48, 71 765049 179 766177 20, 47, 71
764215 78,99 765050 179 766178 20, 47, 71
764216 78,99 765052 44 766179 20, 47, 71 Propellers
764217 78,99 765063 105 766180 20, 47, 71
764218 78,99 765073 131 766181 20, 47, 71
764219 78,99 765074 131 766182 20, 46, 70
764220 78,99 765075 15,43, 132 766183 19, 46, 70
764221 78,99 765076 15,43, 132 766186 20, 46, 70
Oil &
764222 78,99 765077 15,43, 132 766187 20, 46, 70 Engine
764223 78,99 765078 15,43, 132 766188 20, 46, 70 Care
764224 78,99 765079 15,43, 132 766189 19, 46, 70
764225 78,99 765080 15,43, 132 766195 20, 47, 71
764226 78,99 765110 131 766196 20, 47, 71
764231 131 765111 131 766197 20, 47, 71 Reference
764232 131 765112 131 766198 20, 47, 71 Drawings
764233 131 765113 131 766199 20, 47, 71 & Info
764234 131 765132 21, 51, 74 766200 20, 47, 71
764235 131 765135 179 766201 20, 47, 71
764236 131 765136 179 766202 20, 47, 71
764237 131 765137 179 766203 20, 47, 71 Part
764238 131 765138 179 766204 20, 47, 71 Number
764239 131 765139 179 766209 189 Index
764240 132 765146 187 766210 189
764241 132 765150 22, 52, 76 766211 189
764242 132 765174 179 766216 189
764243 132 765175 179 766282 7
764256 50,72, 111 765176 179 766284 17 Alphabetical
Index
764257 50,72, 111 765177 179 766285 17
Part Number Index
766287 18 768399 17 772966 167

766325 178 768400 17 772967 167
Evin rude
766350 50,72,111 768401 18 772968 167
E-TEC G2
766351 50,72,111 768404 169 772970 168
766352 50,72,111 768407 151 772971 169
766353 50,72,111 768452 73 772972 169
766354 50,72,111 768453 73 772973 169
766355 50,72,111 768458 17 772974 169
Digital Shift
766356 50,72,111 768459 17 773182 167
& Throttle
766357 50,72,111 768746 6,9 773183 167
766567 7 768747 12,14 773184 167
766568 25 768748 10 773185 167
766569 25 768750 5 773619 96
Digital 766578 118 768752 8 775400 133
Gauges & 766579 118,120 768754 10 775640 155
MW1111 766592 30 768756 12 775641 155
766596 6,9,11,13,15,30 768758 14 775776 188
766608 25 768841 6,9 775777 188
766609 25 768842 12,14 775791 109
SystemChecl 766611 18 768843 6,9 775792 109
Gauges 766690 140 768844 6,9 775793 109
& MWS 766905 20,47,71 768845 12,14 775794 109
766906 20,47,71 768846 10 775795 109
766907 24,55,81,112,153 768866 10 775796 110
766918 26 769010 8 775797 109
Portable 766919 26 769011 6 775798 110
4-Stroke 766920 26 770242 183 775799 110
766921 26 770388 135 775800 109
i-Dock
Joystick
1 766923
766924
766926
767042
26
26
120
42
770389
770390
770391
770392
135
133
133
133
776579
776580
776708
776709
109
24,54,81,112,152
142
142
767043 42 770393 133 776814 169
System
767044 42 770699 145 776816 121
767045 43 770701 145 776817 121
Rigging
Accessories
1 767046
767047
767048
767049
42
43
42
43
770708
770710
770721
770723
145
145
145
145
776818
776819
776820
776821
121
121
121
121
767052 42 770733 145 776822 121
I 767203 103 770734 145 776823 121
1 767204
767207
103
103
770736
770748
145
145
776824
776825
121
121
Fuel & Oil 767208 103 770749 145 776826 121
Systems 767210 103 770751 145 776828 121
4
767412 167 770752 145 776829 121
IIIII 767431 140 770753 145 776992 110
767488 20-21,48,51,71,75 770754 145 777040 121
767511 151 770755 145 777041 121
767517 155 770757 145 777119 187
Steeri
767525 160 770758 145 777120 187
767620 182 770889 168 777193 188
767682 16 770890 168 777226 187
767683 6,9,11,13,15,177,181 770891 169 777227 187
I 767686 23 770894 168 777228 187
Propellers 767747 7 770895 168 778742 149
767750 18 770901 166 778743 149
767983 8 770902 166 778744 149
767985 10 770906 167 778745 149
767987 12 770907 167 778754 188
767989 14 770908 167 778755 188
Oil &
Engine 767991 49,69 770909 167 778756 188
Care 768007 19,47,71 770910 167 778763 149
768008 19-20,47,71 771839 154 778765 149
768053 19,47,71 771840 154 778775 31,57,83,114,156
768054 19,47,71 771841 154 778776 31,57,83,114,156
Reference 768055 19,47,71 771842 154 778863 179
Drawings 768056 19,47,71 771843 154 778877 188
& Info 768151 18 771864 154 778878 188
768204 28 771866 154 778879 188
768206 28 771896 154 787053 139
768208 28 771970 134 787133 161
Part 768210 28 772022 129 909570 137
Number 768212 28 772023 129 911616 163
Index 768214 28 772457 167 3852350 185
768216 28 772458 167 5000901 139
768218 28 772564 31,56,82,113,155 5005034 186
768220 28 772565 31,56,82,113,155 5005388 139
768224 28 772572 31,56,82,113,155 5005801 68,95
Alphabetical 768241 23 772576 31,56,82,113,155 5006180 65,90
Index I
Index
768337 169 772964 167 5006182 64,92
Part Number Index
5006184 66,93
5006186 64,91
Evin rude
5006253 129
E-TEC G2
5006512 183
5006561 65,89
5007322 165
5007557 101
5007558 101
Digital Shift
5007742 165
& Throttle
5008225 179
5008300 52,74
5008470 101
5008471 101
5008571 23 Digital
5008572 23 Gauges &
5008579 158 MWS
5008580 158
5008581 159
5008582 158
5008585 56,82,113,157 SystemChecl
5008586 56,82,113,159 Gauges
5008589 158 & MWS
5008599 157
5008605 56,82,113,159
5008607 157
5008609 157 Portable
5008613 53,80,112,151 4-Stroke
5008614 54,81,112,152
5008615 54,80,152
5008617 53,80,112,151
5008618 54,81,112,152
5008619 54,80,152 i-Dock
Joystick
5008621 160
System
5008623 160
5008640 22,52,74
5008689 139
5008966 185
5009079 22 Rigging
5009112 186 Accessories
5009234 101
5009235 101 I
5009236 101
5009237 101
5009249 101 Fuel & Oil
5009250 101 Systems
5009251 101
5009252 101
5009520 7
5009544 101
5009545 101
Steering
5009546 101
5009573 29
5009622 27
5009631 139
5009794 166
5009862 29 Propellers
5030087 186
5030287 184
5030288 185
5030422 185
5030925 185
Oil &
5031551 184 Engine
5031552 185 Care
5031826 185
5032104 184
5032105 185
5032551 184 Reference
5032950 185 Drawings
5032996 186 & Info
5033197 184
5033198 185
5033251 139
5033567 184 Part
5033833 147 Number
5033954 184 Index
5034638 185
5035163 184
5035461 185
Alphabetical
Index
Part Number Index
Evinrude
E-TEC G2
Digital Shift
& Throttle
Digital
Gauges &
MWS
SystemCheck
Gauges
& MWS
Portable
4-Stroke
i-Dock
Joystick
System
Rigging
Accessories
Fuel & Oil

Systems
Steering
Propellers
Oil &
Engine
Care
Reference
Drawings
& Info
Part
Number
Index
Alphabetical
Index
Alphabetical Index
2 + 4 Fuel Conditioner 189 Dielectric Grease 144 Wiring Harness 144

2-Stroke Diagnostics 139 Digital Gauges 61,87 Hardware
Evin rude
4-Stroke 117 Drill Fixture 138 Engine Mounting 129
E-TEC G2
Diagnostics 139 Drive Spline 186 Harness 15
Fuel Fittings 155 E-RIG Configurator3, 39, 61, 87, 117, 123 I-Command 21, 51, 73-74
Accessory Electrical Heat Gun 136
Power Y Harness 15 Accessories 136 Heat Shrink Tubing 136 F
Adapter Kit Battery Cable 135-136 Helm 168
Digital Shift
Ignition Module 7 Terminals & Connectors. 137, 142, 144 Hole Saws 137 & Throttle
Ranger 7 Wire 145-146 Hose
Adjustable Tie Bars 166 Electrical Connectors 142, 144 Bulk 31, 56, 82, 113, 155
Aluminum Propellers 175, 179-180, 182 Engine Add-On Kit EPA Guidelines 31, 56, 82, 113, 157
Analog Repower 16 ICON 43 Split Conduit 134
Anchor Kit 160 Engine Care Products Water Pressure & Speedometer 147 Digital
Anti-Corrosion Spray 188 Lubricants & Corrosion 188 Hose & Flange 133 Gauges &
Auxiliary Engine Lift Ring 138 Hose & Primer Bulb Assemblies 56, MWS
Steering Tie Bars 29 Flex Hose 133 82, 113, 157-158
Battery Cable 135-136 Floor Mount Hose Kits 28, 167
Battery Cable Lugs 136 Trim Control 130 Hot Foot 96
Battery Cable Shears 136 Foot Throttle Hot Horn Dash Bezel 147 SystemChecl
Battery Cables ICON 7 Hourmeter 104, 110 Gauges
ICON 6,9, 11, 13, 15 Fuel Hours 193 & MWS
Battery Charging Kits 22, 129 Hose & Primer Bulbs 158-159 HPF Pro Lubricant 188
Battery Terminals 135 Tanks 160 Hub
Bezels 147-148 Parts 160 ICON 30,44
I-Command 49, 69 Fuel Additives Hydraulic Hose Kits 28 Portable
Black Neoprene Dip 137 2+4 189 Hydraulic Tie Bars 27 4-Stroke
Braided Sleeve 133 Fuel Connector Hydras 175
Cable Boot 134 4-Stroke 155 I-Command 62
Cable Connector 135 Fuel Filter 31, 56, 82, 113, 154 Bezels 49, 69
Cable Cover 133 Fuel Fitting. 31-32, 57, 83, 114,155-156 EMM Harness 73
Cables Fuel Fittings Fuel Level Converter Kit 73 i-Dock
Joystick
Battery 134 4-Stroke 155 GPS Module & Tee 21, 51, 75
System
Control, Shift & Throttle 77 79, Fuel Level Converter Kit Harness 21, 51, 74
97, 99-100, 119 I-Command 73 Memory Module Kit 51,75
ICON 29 30, 44 Fuel Level Converter Kit - Unconfigured74 Oil Level Converter Kits ... 53, 80, 151
Teleflex 121 Fuel Level Gauge 103, 105, 107, 109 Power Supply Kit 73
Chart G2 Rigging Kits 64-66 Rigging
Clamps 162 Backbone Cables 29 Rims 50,72, 111 Accessories
Cylinder & Tie Bar 170 Battery Cables 6,9, 11, 13, 15 Sample Network Diagram 205-206
Propeller Hub System 178 Battery Charging Kits 22 Speed Kit, Paddle Wheel .... 22, 52, 76
Propellers Quick Reference Guide .. 33, Battery Power Cables 30 Speed/Fuel Economy Kit 51, 75
58, 84-85, 115-116, 171-172 Diagnostics 139-140 Tees 22, 53, 76
Clamp Pincer 161 Engine Lift Ring 138 Temperature Kit 22, 53, 76 Fuel & Oil
Clamps-Oetiker 161 Foot Throttle 7 Terminator Kit 50, 73 Systems
Clamps-Plastic Snap 162-163 Gauge Converter Kit 18 Tri-Ducer Kit Paddle Wheel. 21, 52, 75
Configurator 3, 39, 61, 87, 117, 123 Gauges 17-18 Water Pressure Sensor Kits 52, 74
Connecting Kit Ignition Switches 6,9-10, 12, 14 Wire Harness 67
Water Pressure Gauge 147 Joystick System 124 i-Dock 123-124, 126
Connection Diagram Network Cables 29 ICON 3-5, 8, 10, Steering
ICON 196-204 Remote Oil Tank 23 12, 14, 34-37, 39-40, 45, 63
Connectors 23, 73, 96, 130 Rigging Kits 5-6,8, 10, 12, 14 Backbone Cables 29,44
Controls RPM Tune 7 Battery Cables 6, 9, 11, 13, 15
Foot 96 Steering Lock Tool 138 Battery Power Cables 30,44
ICON 4-5, 8, 10, 12, 14 Universal Repower Rigging System 16 Engine Add-On Kit 16,43
Portable Engine 118, 120 Water Pressure Sensor Kits 22 Foot Throttle 7 Propellers
Remote 89-93 Gauge Converter Kit Gauge Accessories 20,48, 71
Spacers 132 ICON 18 Gauge Converter Kit 18
Trim Plates 131-132 Gauges Gauges 17-20, 46-47, 70-71
Trim Plates & Spacers 131 Concept Series 105-106 Hub 30,44
Cotter Pin, Propeller Nut 186 Fuel Level Gauge... 103, 105, 107, 109 Ignition Module 7 Oil &
Credit 191 Hourmeter 104, 110 Network Cables 29,44 Engine
Crimper 136 I-Command 49-50, 69, 72, 111 Oil Level Converter Kits 23-24 Care
CSM Accessory ICON ... 17-20, 46-48, 50, 70-72, 111 Remote Oil Tank 23
r
ICON 7 Plug Gauge 106 Rigging Kits. 5-6, 8, 10, 12, 14,42-43 L
Cyclone 174 Retro Series 109-110 Rims 50,72, 111
Cylinder Speedometer 102, 105, 107, 109 RPM Tune 7 Re
ip r af ewr nen gcse
Pivot Mount 169 SystemCheck 102, 105, 107, 109 Shift Throttle 16
Damaged Goods 191 Tachometer 102, 105, 107, 109 Trim Plates 15,43, 132 & Info
Deutsch Connector Components Tech Series 102-104 ICON Data Link Kit 140
Accessories 143 Trim Gauge 103, 106, 108, 110 Ignition
Plugs 143 Voltmeter 103, 106, 108, 110 Switches 6,9-10, 12, 14
Receptacles 143 Water Pressure Gauge 103, Ignition Module 7 Part
Diagnostics 106, 108, 110 Ignition Switch 68, 95 Number
2-Stroke Diagnostics 139 Zephyr Series 107-108 Incorrect Parts 191 Index
4-Stroke 139 Gear Lube Installation
Evinnide E-TEC G2 139-140 HPF Pro Lubricant 188 Steering Tie Bars 25
ICON Data Link Kit 140 GPS Module & Tee Joystick System 124, 126
USB to Serial Adapter 139 I-Command 21, 51, 75 i-Dock 123
Diagram Grease Key Switch Kits 68, 95, 118, 120 Alphabetical
Index
I-Command Network 205-206 Triple-Guard 188 Keys 68, 95
Alphabetical Index
Lanyards 68,95 Rims Trim Gauge 103, 106, 108, 110

Lifting Eye 137 I-Command 50, 72, 111 Trim Plates 131-132
Evin rude
Liquid Tie Bars 27 ICON 50,72, 111 ICON 15, 43, 132
E-TEC G2
Lubricants & Corrosion 188 Rogue 175 Trim Plates & Spacers 131
Memory Module Kit RPM Tune Triple-Guard 188
II I-Command 51, 75 ICON 7 Universal Repower Rigging System
Motor Brackets 149 Rx4 173 ICON 16
Motor Mount Plate 149 SeaStar 165 USB to Serial Adapter 139
Digital Shift
& Throttle
Mount Kit Shears 136 Valve
Pro Trim 129 Shift Throttle Anti-Siphon 32, 57, 83, 114, 156
Mounting Hardware 152 ICON 16 Ventilation Ring 183
Nut Shop Tools 137 Viper 174
11
1 Propeller 185 Engine Lift Ring 138 Voltmeter 103, 106, 108, 110
Digital Oil Steering Lock Tool 138 Warranty 194
Gauges & Parts 24,54-55, 81, 112, 152-153 Shortages 191 Water Pressure Gauge. 103, 106, 108, 110
MWN Tanks 23,151 Snap-In Cables 78-79, 99-100 Water Pressure Sensor Kits 22
Oil - Engine Spacer I-Command 52, 74
XD Oil 187 Propeller 185 Wire 145-146
Oil Fill Kit 24,55, 81, 112,153 Spacers 132 Wire Cover 133
SystemChecli Oil Level Converter Kits Speed Kit, Paddle Wheel Wire Harness
Gauges I-Command 53-54, 80, 151-152 I-Command 22, 52, 76 I-Command 67
& MWS ICON 23-24 Speed/Fuel Economy Kit Wiring Harnesses 94
Oil Pick-Up Kit 54, 81, 112,152 I-Command 51, 75 Extensions 94
Oil Tank 24, 53-54,80-81, 112, 151-152 Speedometer 102, 105, 107, 109 SystemCheck 94, 118, 120
111 Pontoon Series
Oil Tank Assembly
151 Stainless Steel Propellers... 175, 179-181
Steering
Portable
4-Stroke ICON 23 Trim Control 130
Oil Tank Pick-Up Assembly Steering Fluid 169
i-Dock
Joystick
1 ICON
Ordering Information
Paint
Phone Numbers
23
192
189
193
Steering Friction Kit
Steering Kits
Engine Mounted
Parallel Entry
165
166
166
Pitot Tube 148 Steering Link Kit 166
System
Plug Gauge 106 Steering Lock Tool 138
Pontoon Series Steering Module 170
Oil Tank 151 Steering Packages 167, 169
Portable 4-Stroke 117 Parts & Accessories 168-170
Rigging Power Supply Kit Steering System 165
Accessories I-Command 73 Steering Tie Bars 25-26, 29
Power Y Harness 15 Switches
PowerPost 135 Ignition 6, 9-10, 12, 14
Primer Bulb Assembly ... 56, 82, 113, 159 System Check 88
11 Profile Drawing 207-208 SystemCheck
Fuel & Oil Oil Tanks 209 Gauge 102, 107, 109
Systems Propeller Exchange Program 191 Gauges 105
Propeller Exhaust Ring 183 Rigging Kits 89-93
IN Propeller Hardware 183-186 Wiring Harnesses 94, 118, 120
Hub System.. 6,9, 11, 13, 15, 176-178 SystemCheck Gauges 87
Propeller Hub System 6,9, Tachometer 102, 105, 107, 109
Steeririll
11, 13, 15, 176-178 TBX Propeller Hub System 6,9,
Propeller Nut Kit 186 11, 13, 15, 176-177
Propeller Wrench 183 Tees
Propellers I-Command 22, 53, 76
2-Stroke Teleflex
I Aluminum 179-180, 182 Control Cable Assembly 121
Propellers Stainless Steel 179-181 Kicker Cable
Aluminum 175 Sea Star 165
Cyclone 174 Mount Kit 129
Hydrus 175 Steering Packages 169-170
Quick Reference Guide 33, 58, Sea Star 167
Oil &
84-85 115-116, 171-172 Cylinder & Tie Bar Chart 170
Engine Raker 173-174 Parts & Accessories 168-169
Care Rebel 174 Temperature Kit
Rogue 175 I-Command 22, 53, 76
Rx4 173 Terminator Kit
SSP 175 I-Command 50, 73
Reference
Viper 174 Terms - Payment 191
Drawings Raker 173-174 Thrust Bushing 184
& Info Rebel 174 Tie Bar 165
Remote Control Adapter 165 Tie Bar Kit 166, 169
Remote Oil Tank Tie Bars 25-27,29, 166
ICON 23 Tie Straps 141-142
Part Repower 16 Tiller Arm Kit 101
Number Returns 192 Tiller Kits 165
Index Rigging Kits Torsion Sleeve 186
I-Command 64-66 Transom Guard 148
ICON .... 5-6, 8, 10, 12, 14, 16,41-43 Transom Plate 149-150
SystemCheck 89-93 Transom Wedge 149
Rigging Selection 3, 39, 61, 87, 117 Tri-Ducer Kit Paddle Wheel
Alphabetical Rigging Supplies 133-134 I-Command 21, 52, 75
Index
Rigging Tools/Accessories 148 Trim Control 130
idirami*
081141111
4:1i4iIririrliwri.IF.1.-bl. rEx. I,fl.h11P NNW

BRP 768847 - Riggingcatalog PDF

Uploaded by

Copyright:

Available Formats

BRP 768847 - Riggingcatalog PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BRP 768847 - Riggingcatalog PDF

Uploaded by

Copyright:

Available Formats

Table of Contents

Fuel & Oil

Evinrude E-TEC G2 ..................................................................................................................................3

Digital Gauges & MWS ...........................................................................................................................59

SystemCheck Gauges & MWS .................................................................................................................87 Digital Shift

Portable 4-Stroke................................................................................................................................... 117

i-Dock Joystick System.......................................................................................................................... 123 Digital

Fuel & Oil Systems ............................................................................................................................... 151

Oil & Engine Care ................................................................................................................................. 187 Portable

Part Number Index ................................................................................................................................ 211 i-Dock

Fuel & Oil

Evinrude E-TEC G2 Rigging Essentials

Rigging Kit, ICON TM II Concealed Side Mount

Refer to ICON TM G2 Connection Diagram for recommended layout and connections.

Rigging Kit, ICON TM II Single Engine Binnacle Control

Refer to ICON TM G2 Connection Diagram for recommended layout and connections.

Evinrude E-TEC G2 Ignition Switches-Single Engine

Evinrude E-TEC G2 Ignition Switches-Dual Engine

Evinrude E-TEC G2 Ignition Switches - 3 and 4 Engines

Lanyard - Replacement for Emergency Stop Switches

P/N Description Pack qty

176288 Replacement Lanyard - 1996 & newer (POP) 1

Evinrude E-TEC G2 Ignition Switches - Replacement Parts

5010162 Ignition switch panel assy Off/on 1

5010164 Key switch assy, no panel 1

5010165 Stop switch and lanyard - no panel 1

5010166 Panel, emergency stop switch assy and lanyard 1

5010167 Extension harness, 36" (915mm), ignition to ems 1

5010168 Extension harness, 36" (915mm), dual rocker to control 1

ICON TM Touch 7.0 Color Touch Screen (CTS)

Major functions and support include:

Predefined, six screen groupings:

P/N Description Pack qty

768459 Replacement Bezel, ICONTM Touch 7.0 CTS 1

768399 Sun Cover, ICONTM Touch 7.0 CTS 1

ICON TM Touch 4.3 Color Touch Screen (CTS)

Major functions and support include:

Predefined, 6 screen groupings:

P/N Description Pack qty

768458 Replacement Bezel, ICONTM Touch 4.3 CTS 1

768400 Sun Cover, ICONTM Touch 4.3 CTS 1

ICON TM 3.5 Color Screen-Single Engine

Predefined, intuitive and uncluttered design arranges engine and boat

P/N Description Pack qty

768151 ICONTM Touch 3.5 C Single Engine with GPS antenna 1

768401 Sun Cover, ICONTM Touch 3.5 Color 1

E-Link Virtual Dashboard

Purchase includes the Evinrude E-Link Wi-Fi module and a

P/N Description Pack qty

Tie Bars, Steering-Kicker/Auxiliary Outboard Steering Kit

Tie Bars, Steering-Triple or Quad - Off-Set Engine Height

Engine Covers Evinrude E-TEC G2

P/N Description Pack qty

768133 Evinrude E-TEC G2 cover 200 H.O. - 300 HP 1

Note: Engine covers are non-returnable for Canadian customers.

Steering Support Brace,Evinrude E-TEC G2

P/N Description Pack qty

Engine Flush Kit,Evinrude E-TEC G2

Features & Benefits: