Kingspan Xdek PDF
Kingspan Xdek PDF
Kingspan Xdek PDF
02 2010
Kingspan X-dek
KS1000 XD Longspan Roofpanel
Insurer Approved Systems
XdekTM Frame-to-Frame Long Spanning Insulated Roof Deck
XdekTM is an insulated roof deck combining a structural deck, FIREsafe insulation and a metal top sheet into one product. Designed to
support a choice of site applied standing seam or membrane finishes, XdekTM provides a clear span capability of up to 6 metres, and
is faster to install than alternative built-up roof deck systems. The internal face of the deck is pre-finished with a fresh white inner finish,
providing a smooth clean interior appearance. XdekTM is suitable for flat roof applications and is available with a Kingspan Warranty
guaranteeing the thermal and structural performance of the panel for up to 25 years.
Key Features
X-dekTM is a frame-to-frame insulated structural roof deck
Key features include:
Fast Installation
Ability to use pack-to-roof mechanical handling removes need for manual handling.
Reduced time on roof due to ease of installation.
Reduction in quantity of components traditionally used on site eg. vapour control layer, fasteners etc.
Facilitates earlier slab, services and fit-out trades - providing faster project completion and handover.
Accelerates roof construction time.
Internal
Clean, white internal appearance
Suitable for suspension of internal lighting, secondary sprinkler pipe runs, heating/cooling ducting, roof ventilation & others,
please consult the Kingspan Technical Service.
System Benefits
Pre-engineered, frame-to-frame structural insulated roof deck.
Fully complies with national safety requirements.
Suitable for frame-to-frame spanning of up to 6 metres.
Rapid, single component, single-fix installation up to 1,200m2 per day.
End-of-life solutions are available.
U-Value 0.19 W/m2K.
X-dekTM can contribute significantly an air thightness off roof solution due to lack of cavities between steel deck and insulation
Firesafe insulated panel system.
Design Versatility
Products compatible with X-dekTM include:
Range of single ply membranes including PVC/TPO/TPE etc.
Standing seam options.
Mechanically fixed systems.
Adhered systems.
Range of bitumen waterproof systems including Asphalt and Torch-on solutions.
A
B
335 mm 333 mm 332 mm
A=100/80
1000 mm B=108
KS1000 XD / Steel
Steel
A
B
335 mm 333 mm 332 mm
A=100/80
1000 mm B=108
KS1000 XD / PVC
PVC
A
B
Water-tight works
Each KS1000 XD panel-roof must be finished with waterproof membrane. KS1000 XD can be used with conventional site applied
membrane finished flat roof applications, which provides the specifier with a wide range of finish possibilities. Due to the type of the
top finish (steel, TR20 or TR27) different types of membrane can be used and different technique of fastening can be used. Please see
the table below which indicates the possible top solutions
The installation of particular roofing membrane must be carried out according to the Supplier instructions in relation to the membrane
fixing method. The water-tightness and durability of the roof is very much depending on the way how the top membrane has been fitted.
Product Data
Application
X-dekTM panels are insulated membrane covered roof panels suitable
for flat roofs for all building applications except where there are low
temperature internal conditions. The KS1000 XD panel secures the
base for final waterproof
covering of the roof installed by others.
X-dek panels are insulated roof panels suitable for flat roofs roof
slope > 1%
X-dek is the long-span composite roofing panel, which provides
the necessary structural strength and stiffness and the required
level of thermal insulation. An outer membrane is applied on site
as a waterproof barrier.
The KS1000 XD panels are suitable for Green Roof solutions
The XD panels can be used as standard panel and as a part of
steel structure structural panel (restraining for the rafters)
Available lengths
Standard lengths 2.5 to 13.5 meters. 13.5 15metres maximum can
be supplied but are subject to a transport surcharge. All the Panels
are manufactured with CUT-BACK (on bottom trapezoidal steel) the
standard cut-back is 50mm, the maximum available is 630mm.
50630mm
Build speed
Multipart Built-up Systems
The rigid closed cell insulation core is available in the follow- Parameters according to Type of
panel EN ISO 717-1:1999
ing specification: Type of panel
Isophenic rigid foam IPN (HCFC Free), nominal density of RA1 [dB] RA2 [dB] RW [dB]
40 kg/m3. Available nominal thickness of the core 80mm and
100mm.
KS1000 XD 80/100 26 23 27
Performance Panel
thickness
Internal
Steel
Steel-Steel
[kg/m2]
TR 20 /
TR27
PVC
[kg/m2]
Thickness [kg/m2]
Thermal Insulation
0,9 21,4 15,9 16,9
=0,022 W/mK: XD 80
1,1 23,7 18,2 19,2
0,9 22,2 19,1 17,8
R value U Value XD 100
Panel Thickkness (mm) 1,1 24,6 19,1 20,1
[(m2K)/W] [W/m2K]
Unique engineered solution of composite panel Possibile application on roof slope starting from 1.5%.
dedicated especially for FLAT ROOFS Low risk of human factor in installation. Single part
system safe and easy to install.
Big load bearing capacity of panel secured by bottom Possibility of installation directly to the steel rafters.
deep trapezoidal deck gauge at least 0.9mm Purlin sub-structure not required. Reduction of steel
consumption.
Bottom deep trapezoidal deck can provide the lateral
restraint for the rafters.
Product solution allows to carry out installation of At built-up systems the installation must be carried
panels regardless of the weather conditions. out at dry conditions to avoid capture of water and
humidity at insulation core and between the layers of
roof. Increase of moisture by 1% of volume at insulation
layer of MMMF decreases the thermal insulation
roughly by 15%.
IPN insulation core fully fills the whole section of XD Excellent thermal performance of roof, which reduces
panel providing maximum thermal performance. the heating costs and emission of CO2 of whole building.
U-value range:
80 mm thick core 0,23 W/m2K
100 mm thick core 0,19 W/m2K
Continuous IPN core eliminates the cold bridges and the
risk of interstitial condensation
Due to very low humidity absorption factor for the IPN
foam, the risk of physical degradation of insulation core
(increase of lambda value) is very small
Rigid IPN core allows to walk safely over the panels very
low risk of mechanical compression of insulation core
no visible traffic paths after installation and less stress
on the laps / joints of the membrane over the lifetime of
the building.
Very low unit weight of XD panels, depending on Lower dead load of roof covering which results in savings
option amounts from 14 up to 25 kg/m2 at steel section design.
Rapid installation process one panel + waterproof Fast track construction enables to start internal works
membrane, instead of few layers one by one. earlier and finally can reduce the overall installation time,
offering the owner the earlier operation of the building.
The top finish of XD panel can be prepared for Waterproof membrane delivery can be in scope wof
application of various waterproof membranes. This Kingspan or Roofing Contractor
gives the designer/contractor the chance to choose any The Contractors can use their experience at installation
type of waterproof membrane. The panels are offered of various waterproof membranes.
with required accessories for final finish. All roofing elements available at one supplier. Technical
support from one company
Reliability of experienced solutions and materials which
guarantee long durability of whole roofing
The installation of various smoke-vents, roof-lights, fans
and other technical equipment is possible on the XD
panels.
KS1000 XD panels are manufactured from the highest Factory controlled high quality
quality materials, using state of the art production Guaranteed long term reliability, service life and
equipment to rigorous quality control standards, technical performance of panels.
complying with ISO9001:2000 standards.