Ciscocm - Vmware Disk Size Reallocation v1.0

Cisco Unified Communications Manager
VM Dynamic Disk Size Reallocation COP File

Release Notes Version 1
October 28, 2013
Introduction:
These release notes contain important information about installation procedures for the VM Dynamic Disk Size
Reallocation Cop file for Cisco Unified Communications Manager.
Note:
Before you install this update, Cisco recommends that you review the Important Notes section for information
about issues that may affect your system.
Increasing the disk size of a virtual disk:

Purpose
This section guides you through the process of increasing the size of a virtual disk. The procedure is necessary to
accommodate data requirements that have changed since the creation of the virtual disk.
Resolution
You must follow step below to increase the size of the disk partition(s).
Caution: VMware recommends that you back up your virtual machine before increasing the size of virtual disks.
The procedure for increasing the size of a virtual disk differs between VMware products. Follow the section below
that matches your product.
In all cases, confirm the following before increasing the size of the virtual disk:
All snapshots have been removed. For additional information, see Working with snapshots (1009402).
The virtual machine is powered off.
CUCM 9.1 and earlier requires cop file (see below)
Note: In ESX 4.1, you can extend and add virtual disks to a virtual machine when it is powered on (after installing VMware
Tools). However, CUCM requires a reboot to recognize the changes.
Instructional Notes
If you have ESX 4.0 or newer:
1.
2.
3.
4.
5.
6.
7.
8.
(UCM 9.1 and earlier only) Install the ciscocm.vmware-disk-size-reallocation-1.0.cop.sgn COP file.
Shutdown guest VM
Open VMware Infrastructure (VI) Client and connect to VirtualCenter or the ESX host.
Right-click the virtual machine.
Click Edit Settings.
Select Virtual Disk.
Increase the size of the disk.
Power on guest VM.
Note: If this option is greyed out then the disk may be running on snapshots or the disk may be at the maximum allowed size
depending on the block size of the datastore
For further details on Virtual Disk Configuration, you can reference the vSphere Virtual Machine Administration Guide.
Updates in This Release

Updates are cumulative, so installing this patch will provide all of the fixes in the New Updates section plus all of the fixes
in the Previous Updates section if applicable.
New Updates
CSCuc58936
VM Dynamic Disk Size Reallocation
Previous Updates
N/A
Related Documentation:
To view documentation that supports your version Cisco Unified Communications Manager release, go to:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_documentation_roadmaps_list.html
Determining the Software Versions:

Unified Communications Manager
You can determine the System Version of your Cisco Unified Communications Manager software that is running on your
server by accessing Cisco Unified Operating System Administration.
The following information displays:
- System version: xxxxx
- VMware Installation: xxxxx
Important Notes:
When upgrading to a new release of Cisco Unified Communications Manager, make sure that the updates in this release
are included in the version you are upgrading to. If an ES or SU is installed after this update that does not also contain the
fixes referenced in Updates in This Release then this update will need to be reapplied after the ES or SU is installed.
However when the disk size is increased, it will remain in effect for the life of the VM.
Installation Instructions:
As with any installation or upgrade, it is recommended that you apply this Update during off peak hours.
Applying this update will require a reboot.
This package will install on the following System Versions:
- 8.5.1.10000-xx or any higher version starting with 8.5.1.xxxxx
You can install a patch or upgrade version from a DVD (local source) or from a computer (remote source) that the server
being upgraded can access.
Note: Be sure to back up your system data before starting the software upgrade process. For more information, see the
Disaster Recovery System Administration Guide
From Remote Source:

Step 1: Download ciscocm.vmware-disk-size-reallocation-1.0.cop.sgn
Step 2: Copy the upgrade to an ftp or sftp server.

Step 3: Open Cisco Unified Communications Operating System Administration directly by entering the following URL:
http://server-name/cmplatform
where server-name is the host name or IP address of the admin server.
Step 4: Enter your OS Administrator username and password.
Step 5: Choose Software Upgrades > Install/Upgrade.
Step 6: For the software location source, choose Remote File System.
Step 7: Enter the directory name for the software upgrade, if required.
If the upgrade file is located on a Linux or Unix server, you must enter a forward slash at the beginning of the
directory path. For example, if the upgrade file is in the patches directory, you must enter /patches.
If the upgrade file is located on a Windows server, check with your system administrator for the correct directory
path.
Step 8: Enter the required upgrade information as described in the following table:
Remote Server: Host name or IP address of the remote server from which software will be downloaded.
Remote User: Name of a user who is configured on the remote server.
Remote Password:
Download Protocol:
Password that is configured for this user on the remote server.

Choose sftp or ftp.
Step 9: To continue the upgrade process, click Next.

Step 10: Choose " ciscocm.vmware-disk-size-reallocation-1.0.cop.sgn " and click Next.
Step 11: In the next window, monitor the progress of the download, which includes the filename and the number of
megabytes that are getting transferred.
When the download completes, the Checksum window displays.
Step 12: Verify the checksum value:
5f:cf:ab:87:fb:37:c8:ef:a1:cc:c0:3a:f8:3e:89:22
Step 13: After determining that the checksums match, click Next to proceed with the software upgrade.
A Warning window displays the selected option.
Step 14: Click Install.
The Install Status window displays and displays the install log.
Step 15: When the installation completes, click Finish
Step 16: Verify the COP file version using this command from the CLI:
admin:show version active
Active Master Version: 9.1.1.xxxxx-xx <-- Note: 9.1.1 is shown for example only; your version may vary
Active Version Installed Software Options:
ciscocm.vmware-disk-size-reallocation-1.0.cop

Ciscocm - Vmware Disk Size Reallocation v1.0

Uploaded by

Copyright:

Available Formats

Ciscocm - Vmware Disk Size Reallocation v1.0

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ciscocm - Vmware Disk Size Reallocation v1.0

Uploaded by

Copyright:

Available Formats

Cisco Unified Communications Manager

VM Dynamic Disk Size Reallocation COP File

Increasing the disk size of a virtual disk:

Updates in This Release

VM Dynamic Disk Size Reallocation

Determining the Software Versions:

From Remote Source:

Step 2: Copy the upgrade to an ftp or sftp server.

Password that is configured for this user on the remote server.

Step 9: To continue the upgrade process, click Next.

You might also like