Scribd Logo
Upload

Welcome to Scribd!

  • 239 views

    Conventional and CAD of Electrical Machines EEE023

    Uploaded by

    Dheeraj Kumar
    This document is a past exam paper for a B. Tech course on conventional and CAD design of electrical machines. It contains 4 questions with multiple parts each. Question 1 has parts on electrical conductor properties, effects of specific magnetic loading on machine design, calculating cooling air requirements, and ratings of electrical machines. Question 2 has parts on deriving transformer output equations, designing a step-core transformer, and winding arrangements. Question 3 has parts on designing a salient pole alternator stator and explaining leakage reactance and ventilation. Question 4 has parts on gap expansion factor, designing an induction motor, and programming main dimensions of a generator.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Conventional and CAD of Electrical Machines EEE023

    Uploaded by

    Dheeraj Kumar
    239 views3 pages
    This document is a past exam paper for a B. Tech course on conventional and CAD design of electrical machines. It contains 4 questions with multiple parts each. Question 1 has parts on electrical conductor properties, effects of specific magnetic loading on machine design, calculating cooling air requirements, and ratings of electrical machines. Question 2 has parts on deriving transformer output equations, designing a step-core transformer, and winding arrangements. Question 3 has parts on designing a salient pole alternator stator and explaining leakage reactance and ventilation. Question 4 has parts on gap expansion factor, designing an induction motor, and programming main dimensions of a generator.

    Original Description:

    cad

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a past exam paper for a B. Tech course on conventional and CAD design of electrical machines. It contains 4 questions with multiple parts each. Question 1 has parts on electrical conductor properties, effects of specific magnetic loading on machine design, calculating cooling air requirements, and ratings of electrical machines. Question 2 has parts on deriving transformer output equations, designing a step-core transformer, and winding arrangements. Question 3 has parts on designing a salient pole alternator stator and explaining leakage reactance and ventilation. Question 4 has parts on gap expansion factor, designing an induction motor, and programming main dimensions of a generator.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    239 views3 pages

    Conventional and CAD of Electrical Machines EEE023

    Uploaded by

    Dheeraj Kumar
    This document is a past exam paper for a B. Tech course on conventional and CAD design of electrical machines. It contains 4 questions with multiple parts each. Question 1 has parts on electrical conductor properties, effects of specific magnetic loading on machine design, calculating cooling air requirements, and ratings of electrical machines. Question 2 has parts on deriving transformer output equations, designing a step-core transformer, and winding arrangements. Question 3 has parts on designing a salient pole alternator stator and explaining leakage reactance and ventilation. Question 4 has parts on gap expansion factor, designing an induction motor, and programming main dimensions of a generator.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    EEEO23

    Printed Pages-3

    Foltowing Paper ID and Roll No. to be filled in yourAnswer Book

    B. Tech.

    (sEM. VD THEORY EXAMINATION 2011-12

    CONVENTIONALAND CAD OF ELECTRICAL


    MACHINES
    Tbtal Marlu : 50

    Time :2 Hours

    Note

    I.

    :- (t)
    (2)

    AttemPt all questions.


    Each question carries equal marks.

    Answer any three parts of the following

    (a)

    :-

    (3%x4=14)

    What are the different properties of conducting materials

    which decides whether the material is suitable or not

    for a particular aPPlication

    (b)

    How the specific magnetic loading effects the design

    of electrical machines

    (c)

    Calculate the volume of cooling air in cubic meter per


    sec requried to dissipate the losses of a 12

    MW generator

    whose efficiency is96%. The inlet temperature is 14oC

    and that

    (d)

    of outlet temperature of air is 34oC.

    Explain continuous rating, short time rating

    and

    intermittant rating with reference to electrical machines.

    (e)

    Explain the use of Simpson's rule to find out the ampere/

    turn/m in teeth of the electrical machine.

    EEE023/PUR-40508

    [Turn Over

    2.

    :-

    Answer any two parts of the following

    (6x2=12)

    (a)

    Derive the output equation for a 3-phase shell type


    transformer. State the assumptions made. Explain why
    stepped core is used in transformers.

    (b)

    A 300 kVA; 3-phase, 50 H466001400 volts, delta/star,


    core type transformer intended for lighting load is to
    be designed with approximately 9 volts per turn and a
    flux density of l'4 Tesla. Take a three-stepped core
    and yoke area l1Yo more than core area. Calculate :-

    (i)
    (ii)
    (c)

    Core section and yoke's section.


    Primary and secondary turn per phase.

    Discuss an arrangement of low voltage and high voltage

    winding on core of 3-phase core type and 3-phase shell


    type transforners.
    3.

    :-

    Answer any two parts of the following

    (a)

    (6x2=12\

    Design the stator frame for a 500 kVA, 6600 V, 50 Hz,


    I 2-pole, star-connected, 3-phase salient pole alternatoq

    giving the following informations

    (i)
    (ii)

    Number of stator conductors.

    (iii)

    Number of stator slots.

    lnternal diameter and gross length of stator frame.

    Specific magnetic loading : 0'6 Tesla


    Specific electric loading : 26000 Ampereconductor per meter.
    Assume other data needed

    (b)

    Explain

    (i)

    if

    any.

    Leakage reactance in an alternator having double

    layer winding.

    (ii)

    Ventilation of electrical machirres.

    EEEO23/PUR.4O5OE

    (c)

    Explain the method of determination of full-load mmf

    for a salient pole synchronous generator.

    4.

    Answer any two parts of the following

    :-

    (6x2=12)

    (a) What is gap expansion factor ? How does it affect the


    calculation of ampere-turn of air-gap of induction motor?

    What changes would you suggest in the design of a 3phase squirrel cage Induction motor to achieve increased

    starting torque

    (b)

    Determine main dimensions, turns per phase, number

    of slots, conductor section and slot area of 200

    H.P.,

    3-phase, 50 Hz, 400 volts, 1475 rpm slip ring induction

    motor. Assume B,"

    = 0.5 wb/m2, ac :

    efficiency : 0.9 and power factor :


    density : 3.5 amperes/mm2.

    (c)

    30,000 Ac/m,

    0'9 ,

    current

    Write a program with flowchart to estimate the main


    dimensions of 1800 kVA, 50 Hz, 3 phase, 175 rpm
    water cooled wheel generator. The specific magnetic
    loading is 0'8 wb/m2 and the specit-rc electric loading
    is 26,000 ampere-conductor/m. Pole arc to pole pitch

    ratio is 0'7.

    EEEO23/PUR4O5O8

    1925

    You might also like