Ihm Exor PDF

UniPlus - Industrial PLC Workstation
UniOP - Universal Operator Panel Family

16 Line x 40 Character LCD or ELD
Full-Graphic 320x240 Pixel Resolution
35 Programmable Keys
Keyboard Macro Editor
Recipe Capabilities
UniNET Networking Capabilities
Links Directly to PLC Programming Port
Touchscreen Option (LCD Only)
NEMA 4/12 Compliant Enclosure
The MKDL-16 and MKDR-16 models fulfill the need for a powerful yet cost effective operator interface system.
Displays are available with sixteen lines and your choice of a pixel based LCD or EL display. Each line can contain up to
40 characters. Each page can contain up to 32 lines (with the exception of the touchscreen panel, which contains 16
lines). These lines can be accessed by scrolling with the arrow keys. Brightness control is provided to adjust the display
for easy viewing under nearly any condition.
Display Variables
PLC internal variables can be shown on any of the many display pages. The number of variables that can be viewed at
one time is limited only by the display size. UniOP also provides scaling (linear conversion) of the displayed data. The
final value can then be shown in several useful formats including bargraph, date, time, decimal, bit, hexadecimal, floating
point, and string. Data entry with valid range verification is also available for each data type.
Data Entry
The integral keypad offers 35 programmable keys (16 with user LEDs). There are also 8 additional user programmable
LEDs. Slide-in legends make it easy to customize and document the operation of each key which has an LED. The
optional analog touchscreen adds the ability to create touchcells as small as a single character or as large as the entire
screen. UniOP also features an internal battery-backed real time clock. Time and date information from the clock are
periodically updated in the PLC to enable processing based on time-of-day, day-of-week or any other period.
Security
An eight-level password protection scheme protects critical system features from undesired access.
Alarms
UniOP can monitor and display up to 1024 alarms. Attributes and unique messages for each alarm can be defined.
Operator acknowledgment can also be required. The last 256 alarm events detected by the UniOP are retained in an
internal event list. This list can be viewed on screen or printed on a serial printer to obtain a permanent record.
Adaptability
Custom display screens are developed using the UniOP Designer for Windows programming software. Your
completed project file can be downloaded to the display through the serial port and permanently stored in a Flash
EPROM.
Graphic Capabilities
The MKDL-16 and MKDR-16 allow you to display bitmap graphics. These bitmap can be created with any Windows
based software package capable of BMP format.

A feature that allows you to configure your UniOP keys to do a variety of functions locally in the UniOP. For example:
turning pages, setting attributes, setting LEDs, writing to the PLC, going to the alarm list, uploading or downloading a
recipe set and many more. This can save many hours of ladder logic programming.
Recipes
This feature allows you to create a recipe with up to 255 parameter sets for each page of the project file. UniOP has a
total of 16K reserved for recipe storage. You can upload or download a parameter set from or to the PLC. Once a
parameter set has been downloaded to the PLC, the data contained within the parameter set can be modified.
UniNET
The UniNET network allows the user to design a network in many different ways for use of several UniOP panels with
several PLCs. This way data can be written to or retrieved from the PLCs in many different locations at one time. The
UniNET network creates a bridge between UniOP panels which allows data to be shared by all PLCs in the network,
regardless of their type or manufacturer.
Important Features
NEMA 4/12 compliant enclosure
CE approved
UniNET network capabilities
Recipe configuration
One RS-232 / RS-422 / RS-485 / 20mA
current loop serial port, speeds up to
38,400 baud for direct PLC connection
One RS-232 port for PC or printer
communications
Real time clock with battery back-up
One auxiliary port for high speed bus
network communications
512 KB internal memory standard Flash

EPROM
Optional 512 KB memory upgrade (1 MB
total memory)
Unlimited number of variables per page
Optional analog touchscreen
1024 prioritized alarms
Historical event list (last 256 events)
Eight-level password protection
Prints reports, alarm list, and event list to
serial printer
Displays ASCII standard character set
Specifications
Physical Dimensions
See drawing below
Cutout Width and Height
80 mm (3.15")
Cutout Depth
9 mm (0.35")
Front Panel Thickness (max.)
220 mm (8.66")
311 mm (12.24")
Faceplate height
Faceplate Width
2.5 kg (5.5 lb)
Weight
Environment
0 to 50 C (32 to 122 F)
Operating Temperature
0 to 95% RH (non-condensing)
Humidity
800 mA maximum, 24 VDC

500 mA maximum, 24 VDC
Power Requirements (MKDL-16)

Power Requirements (MKDR-16)
Display
Liquid Crystal
Type
16 lines x 40 characters/line
Size
5.6 in
Diagonal Size
5.15 mm (13/64 inch)

Electroluminescent
Character Height
Type
16 lines x 40 characters/line
Size
5.6 in
Diagonal Size
4.4 mm (23/128 inch)
Character Height
Touchscreen/Keypad
Keypad Technology
Touchscreen Technology
Tactile Feedback (tested 5M times)

Resistive (tested 3M times)
Touchscreen Matrix Size
16x40
Warranty
All products are warranted for one year against defects in material and workmanship.
Ordering Information
Description
EL, 16 x 40
LCD, 16 x 40
LCD with Analog Touchscreen, 16 x 40
Part No.
MKDL-16
MKDR-16
MKDR-16T
Panel Cutout Dimensions
Specifications subject to change without notice

Ihm Exor PDF

Uploaded by

Copyright:

Available Formats

Ihm Exor PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ihm Exor PDF

Uploaded by

Copyright:

Available Formats

UniPlus - Industrial PLC Workstation

UniOP - Universal Operator Panel Family

Keyboard Macro Editor

512 KB internal memory standard Flash

Cutout Width and Height

Front Panel Thickness (max.)

2.5 kg (5.5 lb)

800 mA maximum, 24 VDC

Power Requirements (MKDL-16)

5.15 mm (13/64 inch)

4.4 mm (23/128 inch)

Tactile Feedback (tested 5M times)

Touchscreen Matrix Size

Panel Cutout Dimensions

Specifications subject to change without notice

You might also like