Content

Content .......................................................................................................................................
Power Electronics / Electrical Machines / Drive Technology ......................................................
EEM Electrical machines 300W .................................................................................................
EEM 4-3 Asynchronous machines 300W ...................................................................................
EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque 300W

Lucas-Nlle GmbH

Page 1/20

1
2
2
3
3

www.lucas-nuelle.com

Power Electronics / Electrical Machines / Drive

Technology
Equipment and systems for vocational qualifications and engineering education on the following topics:
Electrical machines, power electronics, drive technology
Complete machine labs, electrical machine labs and drive technology

EEM Electrical machines 300W

EEM Electrical machines 300W

Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinction
can be drawn between DC, AC and three-phase machines.
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives
found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the
servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.

Lucas-Nlle GmbH

Page 2/20

www.lucas-nuelle.com

EEM 4-3 Asynchronous machines 300W

EEM 4-3 Asynchronous machines 300W

Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simple
design asynchronous squirrel-cage machines are particularly widespread.
The training objectives are:
Motor connection
Reversing rotation direction
Manual switching
Machine-specific values and characteristics
Measurement evaluation

Lucas-Nlle GmbH

Page 3/20

www.lucas-nuelle.com

EEM 4.1-3 Three-phase induction motor with squirrel

cage and distinct pull-out torque 300W

EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque
300W

Additional training objectives:

Star-delta connection
Steinmetz circuit
Reactance power compensation with capacitors of various capacitance

Lucas-Nlle GmbH

Page 4/20

www.lucas-nuelle.com

Equipment set, consisting of:

Equipment set, consisting of:
Pos.

Product name

Bestell-Nr.

1 Three-phase asynchronous motor, squirrel-cage, 0.3kW

Anz.

SE2672-3G

CO3212-2D

Three-phase asynchronous motor with pronounced pull-out torque.

Nominal voltage: 690/400V, 50 Hz
Nominal current: 0.6A/1A
Nominal speed: 2800rpm
Nominal power: 0.37kW
Power factor (cos phi): 0.83
Dimensions: 340 x 210 x 210mm (WxHxD)
Weight: 9kg

2 Star-Delta switch
Switch positions: O - star - delta (rotary switch)
Contact rating: 690V, 12A, max.
Inputs/outputs: 4mm safety sockets
Dimensions: 297 x 114 x125mm (HxWxD)
Weight: 0.8kg

Lucas-Nlle GmbH

Page 5/20

www.lucas-nuelle.com

3 Cut-out switch, 4 pole

CO3212-1W

CO3212-6X

Switch position: 0 - 1 (rotary switch)

Contact rating: 660V, 12A max.
Inputs/outputs: 4mm safety sockets
Dimensions: 297 x 114 x 125mm (HxWxD)
Weight: 0.8kg

4 Capacitive load, three-phase, 14-stage,

The capacitive load is for step-by-step loading or compensation of
reactive power in conjunction with asynchronous 3-phase machinery.
Capacitors: 3x 1F / 2F / 4F / 8F
Electrical strength 450V
Dimensions: 297 x 228 x 140mm (HxBxT)
Weight: 2.0kg

Lucas-Nlle GmbH

Page 6/20

www.lucas-nuelle.com

Media:

Pos.

Product name

Bestell-Nr.

5 Interactive Lab Assistant: Asynchronous machines 0.3/1kW

SO2800-1C

Anz.
1

Multimedia experiment software with virtual instruments, instructions

and documentation of results on squirrel-cage rotor machines,
polarity-switching Dahlander three-phase motors and three-phase
motors featuring two separate windings with power ratings of 0.3
and 1 kW.
Interactive experiment set-ups
Measurements and graphics can be copied to the experiment
pages by means of drag and drop
Measurement and testing software can be started directly
from the experiment instruction pages
Questions with feedback and evaluation logic for testing
knowledge
Document print-out for simple printing of experiment
instructions with solutions
CD-ROM with Labsoft browser, course software and software
for braking systems and measuring equipment

Lucas-Nlle GmbH

Page 7/20

www.lucas-nuelle.com

Additionally required - Machine test bench equipment set for servo-drive/braking system:

Lucas-Nlle GmbH

Page 8/20

www.lucas-nuelle.com

Pos.

Product name

Bestell-Nr.

6 Servo machine test stand for 0.3kW machines incl. software

ActiveServo (D,GB,F,E)

CO3636-6V

Anz.
1

The servo-machine test bench is a complete testing system for

examining electrical machines and drives. It consists of a digital
controller, a brake and the AktiveServo software. The system
combines state-of-the-art technology with ease of operation.
The system also allows manual and automated synchronisation to
be carried out.
The controller has the following features:
Dynamic and static four-quadrant operation
10 selectable operating modes/machine models (torque
control, speed control, flywheel, lifting drive, roller/calander,
fan, compressor, winding gear, arbitrarily defined timedependent load, manual and automated network
synchronisation)
Integrated galvanically isolated amplifier for voltage and
current measurement
Speed and torque displays
Four-quadrant monitor
USB interface
Thermal monitoring of the machine under test
Testing for the presence of a shaft cover.
Connection voltage: 400V, 45...65Hz
Maximum power output: 4kVA
Dimensions: 297 x 460 x 420mm (HxWxD)
Weight: 13.3kg

The brake is self-cooled asynchronous servo-brake with resolver.

The motor and sensor leads are connected via polarity-safe plugs.
The machine has thermal monitoring and, in conjunction with the
controller, it constitutes a driving and braking system that is free of
drift and requires no calibration.
Maximum speed: 4000rpm
Maximum torque 10Nm
Temperature monitoring: continuous temperature sensor
(KTY)
Resolver resolution: 65536 pulses/revolution
Dimensions: 275 x 210 x 210mm (WxHxD)
Weight: 6kg

ActiveServo is a program for recording characteristics of machines

and for determining dynamic and static operating points. It emulates

Lucas-Nlle GmbH

Page 9/20

www.lucas-nuelle.com

seven different loads (flywheel, pump, calander, lifting drive,

compressor, winding gear, arbitrarily configurable time-dependent
load) for which the parameters can be individually configured.
Features:
Measurement, calculation and display of mechanical and
electrical variables
(Speed, torque, mechanical power output, current, voltage,
active, apparent and reactive power, efficiency, power factor)
Simultaneous display of measured and calculated values
(e.g. instant display of efficiency)
Measurement of voltage and current (including RMS values
even for non-sinusoidal waveforms)
Speed or torque-controlled operation
Recording of variables over time
Programming of limiting values of speed or torque to prevent
inappropriate loading of the machine under test.
Operation in all four quadrants (display of generated torque)
Arbitrarily defined ramp functions for PC-controlled load
experiments
Display of characteristics from several experiments to better
illustrate the effect of parameter changes
Export of graphics and measurements
32-bit version for Windows

7 Rubber coupling sleeve, 0.3kW

SE2662-2A

Rubber coupling sleeve used for the coupling of two machines

Permits rapid and safe assembly
Designed with internal ring gear
Material: rubber (neoprene)
Dimensions: 40 x 45mm (length x diameter)
Weight: 0.1kg

Lucas-Nlle GmbH

Page 10/20

www.lucas-nuelle.com

8 Coupling guard, 0.1/0.3kW, transparent

SE2662-7B

SO6200-7D

Plug-in plastic panel to prevent people touching the revolving

coupling between two machines
Material: clear makrolon with plug
Dimensions: 115 x 90 x 60mm (HxBxT)
Weight: 0.1kg

9 QuickChart, Servo-machine test stand safety and operating

instructions (GB)
Short documentation covering the putting into operation of complex
equipment and experiment set-ups.
Terminal assignment, safety instructions, help
Circuit and assembly diagrams
Color print in DIN A3 format
Laminated: 2 x 250 m

Lucas-Nlle GmbH

Page 11/20

www.lucas-nuelle.com

Power supply:
Pos.

Product name

Bestell-Nr.

10 Universal power supply for DC and Three-Phase Current

CO3212-5U

Anz.
1

Mains power supply for DC, AC and three-phase current and for
excitation of synchronous machines. The mains supply is
specially designed for use with electrical machines.
Outputs:
Three phase: L1, L2, L3, N from 4 mm safety sockets
DC: 0...240VDC variable, controlled and electronically
protected against overload and short circuits.
Output current: 3...10A (adjustable current limiting)
Second DC supply ca. 210VDC, 6A fixed
Protective systems:
Motor protection switch adjustable from 6.3...16A
Undervoltage trip
Safety cut-out
Mains connection: 3x 230/400V, 50/60Hz via CEE plug
with 1.8m mains lead
Dimensions: 297 x 228 x 140mm (HxWxD)
Weight: 3kg

Lucas-Nlle GmbH

Page 12/20

www.lucas-nuelle.com

Measuring instruments:

Lucas-Nlle GmbH

Page 13/20

www.lucas-nuelle.com

Pos.

Product name

Bestell-Nr.

11 Analog/digital multimeter, wattmeter + power-factor meter incl.

Software

CO5127-1Z

Anz.
1

The areas of electrical machines, power electronics and drive

technology pose particular problems for measuring instruments. In
addition to high-performance overload protection, the acquisition of
measurement values must be performed accurately independently of
the curve's shape. The universal measuring device has been
designed particularly to satisfy these requirements. It can
simultaneously replace as many as four different measuring
instruments constituting a current/voltmeter, power and phaseangle meter all in one. The graphic display allows for both student as
well demonstration experiments. The VI Starter software included
allows for visualisation of measurements on a PC.

Simultaneous, measurement of voltage and current

independent of the curve shape (max. 600 V, 20 A)
(measurement of clocked voltages)
Calculation of active, apparent and reactive power as well as
the power factor
Measurement of the total rms (RMS-AC+DC) ; AC rms (RMSAC) and arithmetic mean (AV-AC+DC)
Impervious to electrical damage up to 20 A/600 V
Large-scale, high-contrast background-illuminated graphic
display (5,7")
Large-scale display or display of up to 4 measurement
values
Digital or pseudo-analog display
USB interface
Internal resistance: current path 10mOhm, voltage path
10MOhm
Voltage ranges: 30;300; 600V
Current ranges: 1; 10; 20A
Measurement accuracy: 2%
Automatic or manual measurement range selection
Demonstration test instrument for mains operation
Operating voltage: 230V, 50/60Hz
Dimensions: 297 x 228 x 140mm (HxBxT)
Weight: 2kg

The VI Starter software allows all the measurements to be displayed

on the PC. Up to 17 different displays can be opened.
Oscilloscope display of voltage, current and power
Consumption meter to display power consumed and output

Lucas-Nlle GmbH

Page 14/20

www.lucas-nuelle.com

Data logger for 14 different variables

Data export for data logger
Characteristic recorder
Labview driver and supplied examples
32-bit version for Windows

Accessories:
Pos.

Product name

Bestell-Nr.

12 Set of safety measurement cables, 4mm (23 leads)

Anz.

SO5148-1L

SO5126-9Y

15

Safety measurement cables with 4mm safety plugs, coloured, PVC

insulation, highly flexible
Each set includes the following:
4 x 25cm long, black
4 x 50cm long, black
2 x 100cm long, blue
2 x 100cm long, red
1 x 100cm long, green/yellow
1 x 150cm long, blue
1 x 150cm long, green/yellow
2 x 150cm long, green
2 x 150cm long, brown
2 x 150cm long, black
2 x 150cm long, grey
Wire cross section 2.5 mm
Capacity/category: 600V CAT II, 32A

13 Safety connection plug 19mm/4mm, black

Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II/600V

Lucas-Nlle GmbH

Page 15/20

www.lucas-nuelle.com

14 Safety connection plug 19mm/4mm, black, with tapping

SO5126-9R

SO5126-9V

SO5126-9W

Max. sustained current: 24A

Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II / 600V

15 Safety connection plug 19mm/4mm, blue

Max. sustained current: 24A

Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II / 600V

16 Safety connection plug 19mm/4mm, green/yellow

Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II/600V

Lucas-Nlle GmbH

Page 16/20

www.lucas-nuelle.com

17 Mobile aluminium experiment stand, 3 levels, 6x earthed sockets,

1250x700x1955mm

ST7200-3A

High-quality, mobile experiments stand from the SybaPro range for

demonstrations and experiments. Features aluminium profile legs
compatible with all add-ons and extensions for the SybaPro system.
The mobile experiment stand is supplied in kit form and needs to be
assembled by customers themselves.
Table top:
30-mm table top made of highly compressed, multi-layer fine
chipboard conforming to DIN EN 438-1
Colour grey, RAL 7035, with 0.8-mm slightly textured laminate
coating (Resopal) on both sides, conforming to DIN 16926
Resistant to many chemicals and reagents including dilute
acids and alkalis
Resistant to heat, e.g. molten solder or heating at specific
points such as by soldering tips or cigarette ends
Table top with solid impact-resistant protective edging made
of 3mm thick RAL 7047 coloured plastic
Coating and adhesive are PVC free
Power supply with 6-outlet socket strip mounted underneath
the table top, 2-m lead and earthed plugs
Frame:
2 extruded aluminium profiles with multiple grooves 1800 x
120 x 40 mm (WxHxD)
8 equally sized grooves in extruded aluminium profiles (3 on
each side and 1 each on the front and back)
Grooves accommodate standard industrial mountings
4 H-shaped aluminium profiles, 1150 mm, for 3-layer
organisation of DIN A4 panels
Space for extension of power supply duct
Base made of rectangular tubing with 4 swivelling double
casters, 2 of which have brakes
Table frame made of tough combination of rectangular tubing
around the full perimeter
Acid-resistant epoxy-resin coating, 80 m thick (approx.),
colour RAL 7047
Dimensions:
Height of table top 760 mm
1250 x 1955 x 700 mm (WxHxD)

Lucas-Nlle GmbH

Page 17/20

www.lucas-nuelle.com

18 Power supply for mobile working stations

ST8008-8M

ST8003-8E

ST7200-5A

400-V CEE distribution panel with automatic circuit breakers for

attachment to profiles on experiment trolleys or direct to table-top.
2 CEE sockets (400 V, 16 A, 5-pole) with safety flap
1 Mains socket with earth (230 V) plus safety flap
Circuit breaker: 1 x 3-pole line circuit breaker, type B, 16 A
Mains connection: 3 x 230/400 V, 50/60 Hz via CEE plug, 4-m
mains lead
Dimensions: 530 x 130 x 110 mm (HxWxD)
Weight: 3 kg

19 Wall or aluminium-profile mounting cable storage for 48 cables

Accommodates about 48 safety measuring leads Suitable for
mounting on walls or aluminium profiles

20 PC holder for Syba experiment trolleys, height and width

adjustable
Shelf for desktop PC made of 1.5mm sheet steel punched with
holes, suitable for all furniture in the SybaPro aluminium profile
range
Adjustable assembly height
Adjustable width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assembly (4 bolts and 4
tenon blocks)
Acid-resistant epoxy-resin powder coating, 80m thick
approx., colour RAL7047

Lucas-Nlle GmbH

Page 18/20

www.lucas-nuelle.com

21 Monitor holder for flat screen monitor of weight up to 10kg, VESA

75/100

ST8010-4L

Pivoting monitor holder for attachment to aluminium profiles of

furniture in the SybaPro range. Allows a monitor to be placed in
the optimum position so that work and experiments are less
tiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extruded
aluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and
480mm
Additionally included:
Cable management set for installing cables along the profiles of the
aluminium lab system furniture in the SybaPro range
The set consists of the following:
3 Cross cable binders for front and rear grooves of
aluminium profile
3 Cross cable binders for side grooves of aluminium profile
12 Cable binders
4 Aluminium cover profiles for covering and enabling wires to
be run along the grooves of an aluminium profile

Lucas-Nlle GmbH

Page 19/20

www.lucas-nuelle.com

22 Protection cover for three-level experiment trolleys

ST8010-9Y

Dust cover for three-level experiment trolleys

For protecting equipment from dust and damp
For keeping equipment out of sight
Colour: matt dark grey with printed LN logo in orange)
Material: nylon fabric with polyurethane coating
High resistant to tearing, impregnated to be washable and
waterproof

Lucas-Nlle GmbH

Page 20/20

www.lucas-nuelle.com