Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    SS20 All Films Carli

    Uploaded by

    bulentbulut
    The document reports on the optical data measurement and data preparation of 27 glass samples with applied films. It details the test methods and procedures used to measure optical properties like transmittance, reflectance, and emissivity. The results are presented in a table listing the optical properties of each glass and film sample.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SS20 All Films Carli

    Uploaded by

    bulentbulut
    35 views4 pages
    The document reports on the optical data measurement and data preparation of 27 glass samples with applied films. It details the test methods and procedures used to measure optical properties like transmittance, reflectance, and emissivity. The results are presented in a table listing the optical properties of each glass and film sample.

    Original Description:

    bb

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document reports on the optical data measurement and data preparation of 27 glass samples with applied films. It details the test methods and procedures used to measure optical properties like transmittance, reflectance, and emissivity. The results are presented in a table listing the optical properties of each glass and film sample.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views4 pages

    SS20 All Films Carli

    Uploaded by

    bulentbulut
    The document reports on the optical data measurement and data preparation of 27 glass samples with applied films. It details the test methods and procedures used to measure optical properties like transmittance, reflectance, and emissivity. The results are presented in a table listing the optical properties of each glass and film sample.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    18 Tanglewood Rd. TEL: (413) 256-4647 home@fenestration.

    com
    Amherst, MA 01002 FAX: (413) 256-4823 http://www.fenestration.com
    Carli, Inc. is Your Building Energy Systems and Technology Choice




    Report:

    Optical Data measurement and data preparation of 27
    glass samples with applied films



    Report prepared for: J ohnson Laminating & Coating Inc.




    Report prepared by: Mahabir Bhandari, Ph.D.
    NFRC Certified Simulator



    This report contains the results based on specific test procedures, software and standards listed in the report. It
    does not constitute recommendation for or certification of the product tested. Carli, Inc does not imply or claim that
    the product simulated in this report will perform as stated in actual use conditions. This report is the property of
    Carli, Inc and the client, and shall not be reproduced, except in full, without the written approval from Carli, Inc and
    the client.





    October 16, 2008



    Page

    2
    2
    Carli, Inc. is Your Building Energy Systems and Technology Choice


    Johnson Laminating & Coating Inc. Contracted Carli Inc for the optical data measurement and
    data preparation of the following 31 glass samples with applied films. The films were mounted
    on the reference 3 mm glass sample (Starphire).


    IGDB
    ID ProductName
    4800 Daylight Natural 60% on 3mm Clear
    4801 Daylight Natural 50% on 3mm Clear
    4802 Daylight Natural 50% on 3mm Clear - Exterior
    4803 Daylight Natural 35% on 3mm Clear
    4804 Daylight Natural 35% on 3mm Clear - Exterior
    4805 Daylight Natural 25% on 3mm Clear
    4806 Daylight Natural 20% on 3mm Clear
    4807 Daylight Natural 20% on 3mm Clear - Exterior
    4809 Sunset Bronze 50% on 3mm Clear
    4810 Sunset Bronze 30% on 3mm Clear
    4811 Sunset Bronze 20% on 3mm Clear
    4812 Solar Silver 35% on 3mm Clear
    4813 Solar Silver 20% on 3mm Clear
    4814 Solar Silver 20% on 3mm Clear - Exterior
    4815 Scenic View 40% on 3mm Clear
    4816 Scenic View 30% on 3mm Clear
    4817 Scenic View 10% on 3mm Clear
    4818 Night Scape 35% on 3mm Clear
    4819 Night Scape 25% on 3mm Clear
    4820 Night Scape 15% on 3mm Clear
    4821 Architectural Grey 20% on 3mm Clear
    4822 Architectural Grey 10% on 3mm Clear
    4823 Architectural Grey 05% on 3mm Clear
    4831 Palisade 55% on 3mm Clear
    4832 Palisade 45% on 3mm Clear
    4833 Palisade 25% on 3mm Clear
    NA WHTFST on clear
    NA UVCLR on clear
    NA BLKOUT on clear
    NA WHTOUT on clear
    NA Starphire
    Page

    3
    3
    Carli, Inc. is Your Building Energy Systems and Technology Choice

    Test Methods and Procedures

    Optical data Measurements

    UV-Vis-NIR Measurements:
    Total transmittance and total reflectance factor measurements were performed with ODAs
    Varian
    TM
    Cary 500E
    TM
    UV-Vis-NIR Double Beam Spectrophometer equipped with a 150 mm
    diameter Labsphere
    TM
    Spectralon
    TM
    reference standard. Baselines are measured before and after
    the sample measurements, a zeroline is measured after the sample measurements and a didymia
    transmittance standard is measured during each set of measurements to verify the wavelength
    scale. For transmittance and reflectance factor, the angle of incidence is 0
    o
    and 7
    o
    , respectively.
    The typical wavelength interval is 5nm.

    IR Measurements:

    Specular transmittance and specular reflectance factor measurements are performed with ODAs
    Perking-Elmer
    TM
    9836 G IR Double-Beam IR Spectrophotometer equipped with Perking-
    Elmer
    TM
    Specular Reflectance Accessory. The wavelength range is 2 to 56 mm. In reflectance,
    measurements are made with respect to a protected aluminum specular reflectance reference
    standard from National Physical Laboratory
    TM
    [NPL}in the United Kingdom. Baselines are
    measured before and after the sample measurements, a zeroline is measured after the sample
    measurements, and a polystyrene transmittance standard is measured during each set of
    measurements to verify the wavelength scale. For transmittance and reflectance factor, the angle
    of incidence is 0
    o
    and 7
    o
    , respectively. The wavelength interval is 10cm
    -1
    . This is the method
    adopted by the Lawrence Berkeley National Laboratory [LBNL}.

    The optical properties of glasses with films are summarized in Table 1 .
    Page

    4
    4
    Carli, Inc. is Your Building Energy Systems and Technology Choice
    Table 1: Optical properties of the glasses with applied films

    IGDB
    ID ProductName
    Thickness
    (in) Tsol Rsol1 Rsol2 Tvis Rvis1 Rvis2 emis1 emis2
    4800 Daylight Natural 60% on 3mm Clear 0.13 0.61 0.10 0.08 0.63 0.11 0.09 0.84 0.96
    4801 Daylight Natural 50% on 3mm Clear 0.13 0.48 0.13 0.11 0.49 0.14 0.11 0.84 0.95
    4802 Daylight Natural 50% on 3mm Clear - Exterior 0.13 0.48 0.11 0.13 0.49 0.11 0.14 0.95 0.84
    4803 Daylight Natural 35% on 3mm Clear 0.13 0.41 0.16 0.15 0.37 0.18 0.16 0.84 0.95
    4804 Daylight Natural 35% on 3mm Clear - Exterior 0.13 0.41 0.15 0.16 0.37 0.16 0.18 0.95 0.84
    4805 Daylight Natural 25% on 3mm Clear 0.13 0.27 0.15 0.12 0.27 0.15 0.12 0.84 0.94
    4806 Daylight Natural 20% on 3mm Clear 0.13 0.23 0.24 0.25 0.22 0.26 0.26 0.84 0.92
    4807 Daylight Natural 20% on 3mm Clear - Exterior 0.13 0.23 0.25 0.24 0.22 0.26 0.26 0.92 0.84
    4809 Sunset Bronze 50% on 3mm Clear 0.13 0.44 0.26 0.25 0.54 0.16 0.14 0.84 0.76
    4810 Sunset Bronze 30% on 3mm Clear 0.13 0.24 0.40 0.40 0.33 0.27 0.24 0.84 0.72
    4811 Sunset Bronze 20% on 3mm Clear 0.13 0.13 0.52 0.52 0.20 0.37 0.33 0.84 0.70
    4812 Solar Silver 35% on 3mm Clear 0.13 0.32 0.36 0.36 0.40 0.34 0.32 0.84 0.76
    4813 Solar Silver 20% on 3mm Clear 0.13 0.17 0.52 0.54 0.22 0.51 0.50 0.84 0.73
    4814 Solar Silver 20% on 3mm Clear - Exterior 0.13 0.17 0.54 0.52 0.22 0.50 0.51 0.73 0.84
    4815 Scenic View 40% on 3mm Clear 0.13 0.44 0.17 0.13 0.50 0.16 0.12 0.84 0.90
    4816 Scenic View 30% on 3mm Clear 0.13 0.28 0.33 0.24 0.33 0.31 0.21 0.84 0.83
    4817 Scenic View 10% on 3mm Clear 0.13 0.08 0.54 0.24 0.09 0.54 0.24 0.84 0.88
    4818 Night Scape 35% on 3mm Clear 0.13 0.37 0.20 0.19 0.36 0.17 0.11 0.84 0.81
    4819 Night Scape 25% on 3mm Clear 0.13 0.34 0.18 0.17 0.28 0.16 0.08 0.84 0.84
    4820 Night Scape 15% on 3mm Clear 0.13 0.31 0.15 0.13 0.17 0.14 0.06 0.84 0.85
    4821 Architectural Grey 20% on 3mm Clear 0.13 0.25 0.27 0.35 0.24 0.14 0.31 0.84 0.77
    4822 Architectural Grey 10% on 3mm Clear 0.13 0.10 0.37 0.56 0.08 0.13 0.53 0.84 0.72
    4823 Architectural Grey 05% on 3mm Clear 0.13 0.17 0.25 0.25 0.06 0.10 0.09 0.84 0.80
    4831 Palisade 55% on 3mm Clear 0.13 0.48 0.13 0.12 0.59 0.11 0.09 0.84 0.93
    4832 Palisade 45% on 3mm Clear 0.13 0.38 0.18 0.17 0.50 0.13 0.11 0.84 0.91
    4833 Palisade 25% on 3mm Clear 0.13 0.24 0.25 0.23 0.25 0.27 0.24 0.84 0.90
    NA WHTFST on clear 0.13 0.73 0.16 0.17 0.75 0.18 0.19 0.84 0.96
    NA UVCLR on clear 0.13 0.86 0.08 0.08 0.91 0.08 0.08 0.84 0.95
    NA BLKOUT on clear 0.13 0.00 0.07 0.06 0.00 0.06 0.06 0.84 0.96
    NA WHTOUT on clear 0.13 0.21 0.52 0.70 0.14 0.60 0.79 0.84 0.95
    NA Starphire 0.13 0.90 0.08 0.08 0.92 0.08 0.08 0.84 0.84


    Note: Subscript 1 and 2 represent front and back respectively and emis denotes the emissivity.
    Films are applied at the back side. T and R denote transmittance and reflectance respectively.

    You might also like