Dow Corning: 200 Fluid

Product Information
Dow Corning
! !! !
200
Fluid
FEATURES
Additives, mainly foam control agents, for gas and oil
processing
APPLICATIONS
Dow Corning
200 Fluid 1000cSt, 12,500cSt, 60,000cSt, 100,000cSt,

600,000cSt, 1,000,000cSt are widely used during petroleum production and
refinery operations for foam control. Extremely small addition levels of fluid
effectively control foam in many non-aqueous processing operations. Due to
their unique combination of chemical and physical properties, these
polydimethyilsiloxanes are the most effective antifoams for petroleum
applications.
Main Petroleum applications are in:
- Gas-oil separation
- Delayed Coking
- Vacuum distillation
- Lubricating oil
- Asphalt extraction and processing
Other Petroleum applications:
- Anti-corrosion through water repellency
- Coke inhibition in furnace tubes
- Lubrication
- Low temperature mechanical fluid
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications
on this product.
Parameter Unit Value
Dow Corning
200 Fluid 1000cSt

0176 Appearance Colorless, odorless fluid
0004/0577 Viscosity 25C (77F) cSt 1,000
0001A Specific gravity 0.971
0006 Flash point - open cup C >315
F >599
0133 Pour point C -50
F -58
0461 Surface tension mN/m 21.2
Dow Corning
200 Fluid 12,500cSt

0004/0577 Viscosity 25C (77F) cSt 12,500
F >609.8
F -50.8
Water-clear silicone fluid available
in viscosities up to 1,000,000cSt
Little change in physical properties
over a wide temperature range
Good heat stability, good oxidation
resistance, very low vapor
pressures, and high flash point
Very low pour point
Low toxicity
Essentially inert
Low surface tension - readily wets
petroleum surfaces
Excellent water repellent, release,
dielectric and antifoam properties
Soluble in a wide range of solvents
Depending on viscosity, insoluble
in most crude oil
TYPICAL PROPERTIES (continued)
Parameter Unit Value
Dow Corning
200 Fluid 60,000cSt

0004/0577 Viscosity 25C (77F) cSt 60,000
F >609.8
F -41.8
Dow Corning
200 Fluid 100,000cSt

0004/0577 Viscosity 25C (77F) cSt 100,000
F >609.8
F -27.4
Dow Corning
200 Fluid 600,000cSt

0004/0577 Viscosity 25C (77F) cSt 600,000
F >609.8
F -13
Dow Corning
200 Fluid 1,000,000cSt

0004/0577 Viscosity 25C (77F) cSt 1,000,000
F >609.8
F -13
DESCRIPTION
Dow Corning
200 are 100%

polydimethylsiloxane fluids,
available in different viscosities.
BENEFITS
Effective antifoam in petroleum
foaming materials due to its unique
combination of low surface tension,
inertness, and crude oil insolubility.
HOW TO USE
The main application is in non-
aqueous foam control. The starting
level of active material
recommended in these applications
is 10ppm. In many cases, the
optimal usage level can end up to
be around 1ppm. The fluid is
usually pre-diluted in a
hydrocarbon solvent, and added
continuously by metering pump.
The solvents most often used for
this dilution are white spirits,
toluene, xylene, diesel, or naphtha,
as well as other low molecular
weight petroleum fractions.
The viscosity of the Dow Corning
200 Fluid will be selected to suit

the application. The primary
selection criteria are the insolubility
in the foaming system, the working
temperature, and the ease of
handling.
Higher viscosities are used when
gas-oil ratio increases, or when
increased thermal resistance is
required.
Dow Corning
200 Fluid 100,000

cSt, 600,000cSt and 1,000,000 cSt
for instance, are recommended for
use in gas-oil separation of crude
oil with a high Gas Oil Ratio, or for
use in delayed coking.
Some of the high viscosity
materials are also available pre-
diluted from Dow Corning (e.g.
Dow Corning
2-1165).
HANDLING
PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED
FOR SAFE USE IS NOT
INCLUDED. BEFORE
HANDLING, READ PRODUCT
AND SAFETY DATA SHEETS
AND CONTAINER LABELS FOR
SAFE USE, PHYSICAL AND
HEALTH HAZARD
INFORMATION. THE SAFETY
DATA SHEET IS AVAILABLE
FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 60C
(140F) in the original unopened
containers, this product has a usable
life of 36 months from the date of
production.
PACKAGING
Dow Corning
200 Fluid 1000cSt

is available in 1kg samples, 25kg
pails, 200kg drums and 1000kg
IBC's.
Dow Corning
200 Fluid 12500cSt

is available in 1kg samples, 20kg
pails, 190kg drums and 980kg
IBC's.
Dow Corning
200 Fluid
60,000cSt is available in 1kg
samples, 20kg pails, 190kg drums
and 960kg IBC's.
Dow Corning
200 Fluid
100,000cSt is available in 454g
samples, 18.1kg pails, 192.7kg
drums and 952.5kg IBC's.
Dow Corning
200 Fluid
600,000cSt is available in 1kg
samples and 170kg drums.
Dow Corning
200 Fluid
1,000,000 cSt is available in 1kg
samples and 170kg drums.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical
or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their
product safety needs, Dow Corning
has an extensive Product
Stewardship organization and a
team of Health, Environment and
Regulatory Affairs specialists
available in each area.
For further information, please
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION
PLEASE
READ CAREFULLY
The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Dow Corning's sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect at the time of shipment. Your
exclusive remedy for breach of such
warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted. Dow Corning specifically
disclaims any other express or
implied warranty of fitness for a
particular purpose or merchantability.
Unless Dow Corning provides you
with a specific, duly signed
endorsement of fitness for use,
Dow Corning disclaims liability for
any incidental or consequential
damages. Suggestions of use shall not
be taken as inducements to infringe
any patent.
06/04/01 Dow Corning is a registered trademark of Dow Corning Corporation.
Ref. No. 10-1280-01 FPH25467 2001 Dow Corning Corporation. All rights reserved.

Dow Corning: 200 Fluid

Uploaded by

Copyright:

Available Formats

Dow Corning: 200 Fluid

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dow Corning: 200 Fluid

Uploaded by

Copyright:

Available Formats

Product Information

200 Fluid 1000cSt, 12,500cSt, 60,000cSt, 100,000cSt,

200 Fluid 1000cSt

200 Fluid 12,500cSt

200 Fluid 60,000cSt

200 Fluid 100,000cSt

200 Fluid 600,000cSt

200 Fluid 1,000,000cSt

200 are 100%

200 Fluid will be selected to suit

200 Fluid 100,000

200 Fluid 1000cSt

200 Fluid 12500cSt

You might also like