Textile Effects

Technical Data Sheet

SAPAMINE CWS textile softener

USES
Softening agent for pad and exhaust application Characteristics Soft handle with an excellent surface smoothness Very low yellowing Benefits Extremely soft, smooth hand

Allows production of fabrics and garments with a high whiteness and minimal shade change on colored fabrics Excellent product efficiency. Low waste water contamination. Product can be used even from long liquor ratios Reduces fabric processing problems especially in fabric cutting and sewing by allowing easier laying, separation and manipulation of the fabric plies. Reduces static cling during display and wearing of garments The use of soft water is not required

Very high degree of exhaustion

Extremely effective at preventing static build-up

Stable to hard water

Technical Data Sheet

SAPAMINE CWS textile softener

PROPERTIES
Chemical constitution Ionic character pH Bulk density (20 C) Physical form Storage stability Aliphatic condensation product Cationic 45 (1 % formulation) 0.61 g/cm3 Yellowish pastilles SAPAMINE CWS is stable for 1 year when properly stored in closed containers at 20 C. The product is sensitive to temperatures below -10 C and above 30 C. The usual hygiene and safety rules for handling chemicals should be observed in storage, handling and use. The product must not be swallowed. For further information on SAPAMINE CWS - especially particulars regarding safety when handling, toxicological and ecological data - please consult our product specific safety data sheet. Compatibility SAPAMINE CWS is compatible with common finishing auxiliaries if they are formulated either nonionic or cationic and if they do not contain any metallic salt catalysts.

Ecology/toxicology

6200225E

2/5

Technical Data Sheet

SAPAMINE CWS textile softener

APPLICATION
SAPAMINE CWS textile softener is normally applied by exhaustion. Dissolving/diluting SAPAMINE CWS textile softener is particularly suitable to produce by a simple dilution process very stable stock solutions. It is recommended to dilute SAPAMINE CWS textile softener to a 5% or 10% stock solution. The required amount of water should be set to a temperature of 2565 C. During continuous stirring the pastilles are added until complete dissolving (approximately 60 minutes). Dissolving at low temperature (25 C) is possible, but the higher the temperature (up to 6065 C), the quicker the dissolving process. The formulation should be cooled down during continuous stirring to prevent skin forming on the surface. Important advice At temperatures above 70 C, the emulsion can change into a viscous gel, which is difficult to stir and may lead to problems with further formulations. Before transferring the formulation into the storage tank it should be filtered. Required amount Exhaust method: Pad application: Application Exhaust method pH: Liquor ratio: Time: Temperature: 55.5 (adjusted with acetic acid 60 %) 5:120:1 20 min 3040 C extract water and dry at 110130 C without rinsing process Pad application Padding with a liquor pick-up of 6090 % Bath temperature approx. 20 C Drying at 110130 C A combination with cellulose crosslinking agents is not possible. 16 % o. w. f. SAPAMINE CWS (5 % formulation) 1060 g/l SAPAMINE CWS (5 % formulation)

6200225E

3/5

Technical Data Sheet

SAPAMINE CWS textile softener

NOTES
Due to the cationic formulation of SAPAMINE CWS textile softener it is advisable to check the bath stability, if combined with products of anionic character. Not to be used within resin finish (not stable with catalysts). Not compatible with anionic optical brighteners. In case of articles produced with disperse, reactive, vat and naphthol dyes we recommend checking the wash and crock fastness properties. Spray application (not product specific) Aerosols are generated through the spraying technique that potentially may be hazardous to health. For this reason spray application can only be safely conducted if sufficient ventilation equipment is installed at the product application site which will prevent spreading of the aerosols into the workplace. An alternative would be to carry out the spraying application in a closed system. ATTENTION Our technical data sheets provide directions for the application possibilities of our products. Any influence on dyes, prints and their fastness properties, degree of whiteness, fabric properties, handle, non-slip, seam resistance and material strength, ageing resistance, odor of finished fabric etc. are under the users own responsibility. Due to the many different textile variations we are not able to submit a general recommendation. Our recommendations are in line with our present state of knowledge and do not provide any guarantee. Therefore initial internal bulk trials are absolutely necessary. The manufacturer is not liable for damages due to improper application or application against our explicit recommendations. Statutory provisions and standard regulations must be observed when handling processing agents. For additional detailed information please refer to the product specific safety data sheet.

6200225E

4/5

Technical Data Sheet

SAPAMINE CWS textile softener

Region Europe
Huntsman Textile Effects (Germany) GmbH Rehlinger Str. 1 86462 Langweid a. Lech, Germany [email protected] Tel: Fax: +49 8230 41-0 +49 8230 41-370

Region Americas
Huntsman International LLC Textile Effects 4050 Premier Drive USA-High Point, North Carolina 27265 [email protected] Tel: Fax: +1 800 822 1736 +1 336 801 2808

Region Asia
Huntsman (Guangdong) Ltd. Textile Effects Flying Geese Mountain Industrial Park Shilou Town, Panyu District, Guangzhou 511447, PR China [email protected] Tel: Fax: +86 20 8484 5100 +86 20 8484 5222

Copyright 2007 Huntsman. All rights reserved. All trademarks mentioned are either property of or licensed to Huntsman Corporation or an affiliate thereof in one or more, but not all countries. IMPORTANT: The following supersedes Buyers documents. Sales of the product described herein (Product) are subject to the general terms and conditions of sale of either Huntsman Advanced Materials LLC, or its appropriate affiliate. Huntsman warrants that at the time and place of delivery all Products sold to Buyer shall conform to the specifications provided to Buyer by Huntsman. While the information and recommendations included in this publication are, to the best of Huntsmans knowledge, accurate as of the date of publication, NOTHING CONTAINED HEREIN (EXCEPT AS SET FORTH ABOVE REGARDING CONFORMANCE WITH SPECIFICATIONS PROVIDED TO BUYER BY HUNTSMAN) IS TO BE CONSTRUED AS A REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHTS, OR WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND THE BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER SUBSTANCES. No statements or recommendations made herein are to be construed as a representation about the suitability of any Product for the particular application of Buyer or user or as an inducement to infringe any patent or other intellectual property right. Buyer is responsible to determine the applicability of such information and recommendations and the suitability of any Product for its own particular purpose, and to ensure that its intended use of the Product does not infringe any intellectual property rights. The Product may be or become hazardous. The Buyer should obtain Material Safety Data Sheets and Technical Data Sheets from Huntsman containing detailed information on Product hazards and toxicity, together with proper shipping, handling and storage procedures for the Product, and should comply with all applicable governmental laws, regulations and standards relating to the handling, use, storage, distribution and disposal of, and exposure to the Product. Buyer shall also take all steps necessary to adequately inform, warn and familiarize its employees, agents, direct and indirect customers and contractors who may handle or be exposed to the Product of all hazards pertaining to and proper procedures for safe handling, use, storage, transportation and disposal of and exposure to the Product, and the containers or equipment in which the Product may be handled, shipped or stored. Please note that products may differ from country to country. If you have any queries, kindly contact your local Huntsman representative. 6200225EJuly-2007, Printed in Germany.

www.huntsman.com/textile_effects

6200225E

5/5