www.annaunivedu.

org
ANNA UNIVERSITY, CHENNAI AFFILIATED INSTITUTIONS REGULATIONS 2013 I & II SEMESTER CURRICULUM B.E. Marine Engineering
SEMESTER I
THEORY Course Code HS6151 MA6152 PH6151 CY6152 GE6151 GE6152 MV6101 PRACTICAL Course Code Course Title GE6161 Computer Practices Laboratory GE6163 Physics and Chemistry Laboratory - I MV6111 Marine Engineering Practices Laboratory L 0 0 0 T 0 0 0 P 3 2 4 C 2 1 2 Course Title Technical English - I Mathematics for Marine Engineering - I Engineering Physics - I Chemistry for Marine Engineering Computer Programming Engineering Graphics Basics of Marine Engineering L 3 3 3 3 3 2 3 T 1 1 0 0 0 0 0 P 0 0 0 0 0 3 0 C 4 4 3 3 3 4 3

TOTAL
SEMESTER II
THEORY Course Code HS6252 MA6252 PH6251 GE6252 GE6253 MV6201 PRACTICAL Course Code GE6261 GE6262 GE6263 MV6211 Course Title Computer Aided Drafting and Modeling Laboratory Physics and Chemistry Laboratory - II Computer Programming Laboratory Workshop Fitting Course Title Technical English for Marine Engineering Mathematics for Marine Engineering - II Engineering Physics - II Basic Electrical and Electronics Engineering Engineering Mechanics Marine Engineering Thermodynamics

20

12 29

L 3 3 3 4 3 3

T 1 1 0 0 1 0

P 0 0 0 0 0 0

C 4 4 3 4 4 3

L 0 0 0 0

T 1 0 1 0

P 2 2 2 4

C 2 1 2 2

TOTAL

19

10 29

Page 1 of 23

www.annaunivedu.org
I SEMESTER SYLLABI HS6151 TECHNICAL ENGLISH I LT P C 3 1 0 4

OBJECTIVES: To enable learners of Engineering and Technology develop their basic communication skills in English. To emphasize specially the development of speaking skills amongst learners of Engineering and Technology. To ensure that learners use the electronic media such as internet and supplement the learning materials used in the classroom. To inculcate the habit of reading and writing leading to effective and efficient communication. OUTCOMES: Learners should be able to speak clearly, confidently, comprehensibly, and communicate with one or many listeners using appropriate communicative strategies. write cohesively and coherently and flawlessly avoiding grammatical errors, using a wide vocabulary range, organizing their ideas logically on a topic. read different genres of texts adopting various reading strategies. listen/view and comprehend different spoken discourses/excerpts in different accents. UNIT I 9+3 Listening - Introducing learners to GIE - Types of listening - Listening to audio (verbal & sounds); Speaking - Speaking about ones place, important festivals etc. Introducing oneself, ones family / friend; Reading - Skimming a reading passage Scanning for specific information - Note-making; Writing - Free writing on any given topic (My favourite place / Hobbies / School life, etc.) Sentence completion - Autobiographical writing (writing about ones leisure time activities, hometown, etc.); Grammar - Prepositions - Reference words - Wh-questions - Tenses (Simple); Vocabulary - Word formation - Word expansion (root words / etymology); E-materials - Interactive exercises for Grammar & Vocabulary - Reading comprehension exercises - Listening to audio files and answering questions. UNIT II 9+3 Listening - Listening and responding to video lectures / talks; Speaking - Describing a simple process (filling a form, etc.) - Asking and answering questions - Telephone skills Telephone etiquette; Reading Critical reading - Finding key information in a given text - Sifting facts from opinions; Writing - Biographical writing (place, people) - Process descriptions (general/specific) Definitions - Recommendations Instructions; Grammar - Use of imperatives - Subject-verb agreement; Vocabulary - Compound words - Word Association (connotation); E-materials Interactive exercises for Grammar and Vocabulary - Listening exercises with sample telephone conversations / lectures Picture-based activities. UNIT III 9+3 Listening - Listening to specific task - focused audio tracks; Speaking - Role-play Simulation Group interaction - Speaking in formal situations (teachers, officials, foreigners); Reading Reading and interpreting visual material; Writing - Jumbled sentences - Coherence and cohesion in writing - Channel conversion (flowchart into process) - Types of paragraph (cause and effect / compare and contrast / narrative / analytical) Informal writing (letter/e-mail/blogs) Paraphrasing; Grammar - Tenses (Past) - Use of sequence words - Adjectives; Vocabulary Different forms and uses of words, Cause and effect words; E-materials - Interactive exercises for Grammar and Vocabulary - Excerpts from films related to the theme and follow up exercises Pictures of flow charts and tables for interpretations.

Page 2 of 23

www.annaunivedu.org
UNIT IV 9+3 Listening - Watching videos / documentaries and responding to questions based on them; Speaking - Responding to questions - Different forms of interviews - Speaking at different types of interviews; Reading - Making inference from the reading passage - Predicting the content of a reading passage; Writing - Interpreting visual materials (line graphs, pie charts etc.) - Essay writing Different types of essays; Grammar - Adverbs Tenses future time reference; Vocabulary Single word substitutes - Use of abbreviations and acronyms; E-materials - Interactive exercises for Grammar and Vocabulary - Sample interviews - film scenes - dialogue writing. UNIT V 9+3 Listening - Listening to different accents, Listening to Speeches/Presentations, Listening to broadcast and telecast from Radio and TV; Speaking - Giving impromptu talks, Making presentations on given topics; Reading - Email communication - Reading the attachment files having a poem/joke/proverb - Sending their responses through email; Writing - Creative writing, Poster making; Grammar - Direct and indirect speech; Vocabulary - Lexical items (fixed / semi fixed expressions); E-materials - Interactive exercises for Grammar and Vocabulary - Sending emails with attachment Audio / video excerpts of different accents - Interpreting posters. TOTAL: 60 PERIODS TEXTBOOKS: 1. Department of English, Anna University. Mindscapes: English for Technologists and Engineers. Orient Blackswan, Chennai. 2012 2. Dhanavel, S.P. English and Communication Skills for Students of Science and Engineering. Orient Blackswan, Chennai. 2011 REFERENCES: 1. Raman, Meenakshi & Sangeetha Sharma. Technical Communication: Principles and Practice. Oxford University Press, New Delhi. 2011 2. Regional Institute of English. English for Engineers. Cambridge University Press, New Delhi. 2006 3. Rizvi, Ashraf. M. Effective Technical Communication. Tata McGraw-Hill, New Delhi. 2005 4. Rutherford, Andrea. J Basic Communication Skills for Technology. Pearson, New Delhi. 2001 5. Viswamohan, Aysha. English for Technical Communication. Tata McGraw-Hill, New Delhi. 2008 EXTENSIVE Reading (Not for Examination) 1. Kalam, Abdul. Wings of Fire. Universities Press, Hyderabad. 1999. WEBSITES: 1. http://www.usingenglish.com 2. http://www.uefap.com TEACHING METHODS: Lectures Activities conducted individually, in pairs and in groups like self introduction, peer introduction, group poster making, grammar and vocabulary games, etc. Discussions Role play activities Short presentations Listening and viewing activities with follow up activities like discussion, filling up worksheets, writing exercises (using language lab wherever necessary/possible) etc.

Page 3 of 23

www.annaunivedu.org
EVALUATION PATTERN: Internal assessment: 20% 3 tests of which two are pen and paper tests and the other is a combination of different modes of assessment like Project Assignment Reviews Creative writing Poster making, etc. All the four skills are to be tested with equal weightage given to each. Speaking assessment: Individual speaking activities, Pair work activities like role play, Interview, Group discussions Reading assessment: Reading passages with comprehension questions graded from simple to complex, from direct to inferential Writing assessment: Writing paragraphs, essays etc. Writing should include grammar and vocabulary. Listening/Viewing assessment: Lectures, dialogues, film clippings with questions on verbal as well as audio/visual content. End Semester Examination: 80%

MA6152

MATHEMATICS FOR MARINE ENGINEERING I

L T P C 3 1 0 4

UNIT I THREE DIMENSIONAL ANALYTICAL GEOMETRY 12 Equation of a sphere Plane section of a sphere Tangent Plane Equation of a cone Right circular cone Equation of a cylinder Right circular cylinder. UNIT II DIFFERENTIAL CALCULUS 12 Differentiation of algebraic, circular, exponential and logarithmic functions, of products, quotient functions of a function and simple implicit functions. Successive differentiation- intro. And notation, nth order derivatives of standard functions, nth order derivatives using (a) trig. identities and standard functions (b) partial fractions, Leibnitz theorem, Maclaurins Theorem, and standard expansions, Expansions using standard expansions, Taylors theorem, Indeterminate forms and LHospitals rule, Curve tracing of Cartesian and polar curves. UNIT III FUNCTIONS OF SEVERAL VARIABLES 12 Limits and continuity, Partial derivatives definition, geometrical interpretation and rules of partial differentiation, Higher order partial derivatives, Homogeneous functions, Eulers theorem for homogenous functions Total derivatives and chain rules, Differentiation of implicit functions and composite functions ,Errors and approximations, Maxima and Minima, Method of Lagrangian multipliers. UNIT IV INTEGRAL CALCULUS 12 Integration of standard forms by substitution and by parts. The definite integral as the limit of a sum. Application of integration to area under curve; volume of revolution; First moment of area and the position of a centroid of an area; Work done by variable forces; mean values, Root mean square values of in sin x and Cos nx. The rules of Guldinus.

Page 4 of 23

www.annaunivedu.org
Theorems of parallel and perpendicular axes. Second moments of area and moments of inertia of a rectangular and circular laminas UNIT V MULTIPLE INTEGRALS 12 Double and triple integrals Cartesian coordinates- Region of integration and change of order of integration, Spherical polar and cylindrical coordinates Theorems of parallel and perpendicular axes. Second moments of area and moments of inertia of a rectangular and circular laminas Applications- Area, Volume, Mass of wire, lamina and solid. Centre of Gravity of wire, lamina and solid. Moment of Inertia using multiple integrals TOTAL: 60 PERIODS TEXT BOOKS: 1. Bali N. P and Manish Goyal, Text book of Engineering Mathematics, Third edition, Laxmi Publications(p) Ltd.,(2008). 2. Grewal. B.S, Higher Engineering Mathematics, 40 Edition, Khanna Publications, Delhi, (2007). 3. William Embleton and Leslie Jackson, Mathematics for Engineers Vol- I, 7th Edition, Reeds Marine Engineering Serires, Thomas Reed Publications, (1997). REFERENCES: 1. Ramana B.V, Higher Engineering Mathematics, Tata McGraw Hill Publishing Company, New Delhi, (2007). 2. Glyn James, Advanced Engineering Mathematics, 7 Edition, Pearson Education, (2007). 3. Jain R.K and Iyengar S.R.K, Advanced Engineering Mathematics, 3 Publishing House Pvt. Ltd., (2007).
rd th th

Edition, Narosa

PH6151

ENGINEERING PHYSICS I

LT P C 3 0 0 3

OBJECTIVES: To enhance the fundamental knowledge in Physics and its applications relevant to various streams of Engineering and Technology. UNIT I CRYSTAL PHYSICS 9 Lattice Unit cell Bravais lattice Lattice planes Miller indices d spacing in cubic lattice Calculation of number of atoms per unit cell Atomic radius Coordination number Packing factor for SC, BCC, FCC and HCP structures Diamond and graphite structures (qualitative treatment)- Crystal growth techniques solution, melt (Bridgman and Czochralski) and vapour growth techniques (qualitative) UNIT II PROPERTIES OF MATTER AND THERMAL PHYSICS 9 Elasticity- Hookes law - Relationship between three modulii of elasticity (qualitative) stress strain diagram Poissons ratio Factors affecting elasticity Bending moment Depression of a cantilever Youngs modulus by uniform bending- I-shaped girders Modes of heat transfer- thermal conductivity- Newtons law of cooling - Linear heat flow Lees disc method Radial heat flow Rubber tube method conduction through compound media (series and parallel) UNIT III QUANTUM PHYSICS 9 Black body radiation Plancks theory (derivation) Deduction of Wiens displacement law and Rayleigh Jeans Law from Plancks theory Compton effect. Theory and experimental verification Properties of Matter waves G.P Thomson experiment -Schrdingers wave equation Time independent and time dependent equations Physical significance of wave function Particle in a one dimensional box - Electron microscope - Scanning electron microscope - Transmission electron microscope.

Page 5 of 23

www.annaunivedu.org
UNIT IV ACOUSTICS AND ULTRASONICS 9 Classification of Sound- decibel- WeberFechner law Sabines formula- derivation using growth and decay method Absorption Coefficient and its determination factors affecting acoustics of buildings and their remedies. Production of ultrasonics by magnetostriction and piezoelectric methods - acoustic grating -Non Destructive Testing pulse echo system through transmission and reflection modes - A,B and C scan displays, Medical applications - Sonogram UNIT V PHOTONICS AND FIBRE OPTICS 9 Spontaneous and stimulated emission- Population inversion -Einsteins A and B coefficients derivation. Types of lasers Nd:YAG, CO2 , Semiconductor lasers (homojunction & heterojunction)- Industrial and Medical Applications. Principle and propagation of light in optical fibres Numerical aperture and Acceptance angle Types of optical fibres (material, refractive index, mode) attenuation, dispersion, bending - Fibre Optical Communication system (Block diagram) - Active and passive fibre sensors- Endoscope. TOTAL: 45 PERIODS TEXT BOOKS: 1. Arumugam M. Engineering Physics. Anuradha publishers, 2010 2. Gaur R.K. and Gupta S.L. Engineering Physics. Dhanpat Rai publishers, 2009 REFERENCES: 1. Searls and Zemansky. University Physics, 2009 2. Mani P. Engineering Physics I. Dhanam Publications, 2011 3. Marikani A. Engineering Physics. PHI Learning Pvt., India, 2009 4. Palanisamy P.K. Engineering Physics. SCITECH Publications, 2011 5. Rajagopal K. Engineering Physics. PHI, New Delhi, 2011 6. Senthilkumar G. Engineering Physics I. VRB Publishers, 2011

CY6152

CHEMISTRY FOR MARINE ENGINEERING

LT P C 3 0 0 3

AIM: To impart Sound knowledge of Boiler Chemistry and Boiler Water Treatment including basics of nano chemistry OBJECTIVES: On Completion of the course the Students are expected to Have a thorough knowledge of Boiler Chemistry and Feed Water Treatment methods. Have a knowledge of various Water Hardness analysis procedures Have a basic concept on Nano chemistry UNIT I WATER TECHNOLOGY 9 Water and its impurities Impurities in water fresh water, sea water, distilled water impurities. Purpose of water treatment in boilers, scale formation and prevention. UNIT II BOILER CHEMISTRY 9 Boiler corrosion fretting, pitting corrosion, corrosion fatigue, atoms and ions, electro chemical corrosion, hydrogen and hydroxyl ions, types and causes of corrosion and its control ; chemical and mechanical deareation, methods of chemical deareation, dezincification, stress corrosion,

Page 6 of 23

www.annaunivedu.org
UNIT III BOILER WATER TREATMENT 9 Lime and Soda treatment, PH treatment, salinometer, use of litmus paper, test for partial, total alkalinity, chloride, sulphite, phosphate test, caustic soda treatment, condensate lime treatment. De-salination of water, reverse osmosis and electro dialysis, priming, foaming and control, effects of salts and gases in feed water UNIT IV WATER HARDNESS ANALYSIS 9 Hardness, units of hardness, estimation of hardness by EDTA method, treatment for hardness, total dissolved solids, dissolved oxygen test, use of coagulants, typical test valves for smoke and water tube boilers. UNIT V ENERGY SOURCES AND NANOCHEMISTRY 9 Introduction - Properties (Electrical, Mechancial and vibration) carbon nano tubes -Applications in fuel cells, catalysis and use of gold nanoparticles - batteries secondary batteries - alkaline batteries lead acid, Ni Cd and Li batteries, principles and applications of solar cells, fuels cells - Hydrogen and methanol. TOTAL: 45 PERIODS TEXT BOOKS: 1. Jain.P.C. and Monika Jain, Engineering Chemistry, 4th Edition, Dhanpat Rai & Sons, New Delhi, 2002. 2. Milton and Leech , Marine Boilers .Butter Worth Publishers, UK REFERENCES: 1. Uppal. M.M., A Text book of Engineering Chemistry, 7th Editions, Khanna Publishing, 1988. Water Treatment by J.D. Skelly Imarest Publication , London. 2. Reeds General Engineering Knowledge for Marine Engineers by Leslie Jackson and Thomas D. Morton

GE6151

L T PC 3 0 0 3 UNIT I INTRODUCTION 8 Generation and Classification of Computers- Basic Organization of a Computer Number System Binary Decimal Conversion Problems. Need for logical analysis and thinking Algorithm Pseudo code Flow Chart. UNIT II C PROGRAMMING BASICS 10 Problem formulation Problem Solving - Introduction to C programming fundamentals structure of a C program compilation and linking processes Constants, Variables Data Types Expressions using operators in C Managing Input and Output operations Decision Making and Branching Looping statements solving simple scientific and statistical problems. UNIT III ARRAYS AND STRINGS 9 Arrays Initialization Declaration One dimensional and Two dimensional arrays. String- String operations String Arrays. Simple programs- sorting- searching matrix operations. UNIT IV FUNCTIONS AND POINTERS 9 Function definition of function Declaration of function Pass by value Pass by reference Recursion Pointers - Definition Initialization Pointers arithmetic Pointers and arraysExample Problems.

COMPUTER PROGRAMMING

Page 7 of 23

www.annaunivedu.org
UNIT V STRUCTURES AND UNIONS 9 Introduction need for structure data type structure definition Structure declaration Structure within a structure - Union - Programs using structures and Unions Storage classes, Preprocessor directives. TOTAL: 45 PERIODS TEXTBOOKS: 1. Anita Goel and Ajay Mittal, Computer Fundamentals and Programming in C, Dorling Kindersley (India) Pvt. Ltd., Pearson Education in South Asia, 2011. 2. Pradip Dey, Manas Ghosh, Fundamentals of Computing and Programming in C, First Edition, Oxford University Press, 2009 3. Yashavant P. Kanetkar. Let Us C, BPB Publications, 2011. REFERENCES: 1. Byron S Gottfried, Programming with C, Schaums Outlines, Second Edition, Tata McGrawHill, 2006. 2. Dromey R.G., How to Solve it by Computer, Pearson Education, Fourth Reprint, 2007. 3. Kernighan,B.W and Ritchie,D.M, The C Programming language, Second Edition, Pearson Education, 2006.

GE6152

ENGINEERING GRAPHICS

L T PC 2 0 3 4

OBJECTIVES: To develop in students, graphic skills for communication of concepts, ideas and design engineering products T o expose them to existing national standards related to technical drawings. CONCEPTS AND CONVENTIONS (Not for Examination) 1 Importance of graphics in engineering applications Use of drafting instruments BIS conventions and specifications Size, layout and folding of drawing sheets Lettering and dimensioning. UNIT I PLANE CURVES AND FREE HAND SKETCHING 5+9 Basic Geometrical constructions, Curves used in engineering practices: Conics Construction of ellipse, parabola and hyperbola by eccentricity method Construction of cycloid construction of involutes of square and circle Drawing of tangents and normal to the above curves, Scales: Construction of Diagonal and Vernier scales. Visualization concepts and Free Hand sketching: Visualization principles Representation of Three Dimensional objects Layout of views- Free hand sketching of multiple views from pictorial views of objects UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 5+9 Orthographic projection- principles-Principal planes-First angle projection-projection of points. Projection of straight lines (only First angle projections) inclined to both the principal planes Determination of true lengths and true inclinations by rotating line method and traces Projection of planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object method. UNIT III PROJECTION OF SOLIDS 5+9 Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.

Page 8 of 23

www.annaunivedu.org
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES 5+9 Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 6+9 Principles of isometric projection isometric scale Isometric projections of simple solids and truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in simple vertical positions and miscellaneous problems. Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method . COMPUTER AIDED DRAFTING (Demonstration Only) Introduction to drafting packages and demonstration of their use. 3

TOTAL: 75 PERIODS TEXT BOOK: 1. Bhatt N.D. and Panchal V.M., Engineering Drawing, Charotar Publishing House, 50th Edition, 2010. REFERENCES: 1. Gopalakrishna K.R., Engineering Drawing (Vol. I&II combined), Subhas Stores, Bangalore, 2007. 2. Luzzader, Warren.J. and Duff,John M., Fundamentals of Engineering Drawing with an introduction to Interactive Computer Graphics for Design and Production, Eastern Economy Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005. 3. Shah M.B., and Rana B.C., Engineering Drawing, Pearson, 2nd Edition, 2009. 4. Venugopal K. and Prabhu Raja V., Engineering Graphics, New Age International (P)

Limited, 2008.
5. Natrajan K.V., A text book of Engineering Graphics, Dhanalakshmi Publishers,

Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., Engineering Drawing, Tata McGraw Hill Publishing Company Limited, New Delhi, 2008. Publication of Bureau of Indian Standards: 1. IS 10711 2001: Technical products Documentation Size and lay out of drawing sheets. 2. IS 9609 (Parts 0 & 1) 2001: Technical products Documentation Lettering. 3. IS 10714 (Part 20) 2001 & SP 46 2003: Lines for technical drawings. 4. IS 11669 1986 & SP 46 2003: Dimensioning of Technical Drawings. 5. IS 15021 (Parts 1 to 4) 2001: Technical drawings Projection Methods. Special points applicable to University Examinations on Engineering Graphics: 1 . There will be five questions, each of either or type covering all units of the syllabus. 2. All questions will carry equal marks of 20 each making a total of 100. 3. The answer paper shall consist of drawing sheets of A3 size only. The students will be permitted to use appropriate scale to fit solution within A3 size. 4. The examination will be conducted in appropriate sessions on the same day

MV6101

BASICS OF MARINE ENGINEERING

LT P C 3 0 0 3

OBJECTIVES On Completion of the course the Students are expected to Have studied the renewable and Non-Renewable Energy Sources Have a good knowledge of working principle of 2 Stroke and 4 Stroke Marine IC Engines

Page 9 of 23

www.annaunivedu.org
Have sound knowledge of Marine Refrigeration and Air- Conditioning Plant Have a Knowledge of Metal Forming and Joining Processes and various Power Transmission methods

UNIT I ENERGY RESOURCES AND POWER GENERATION 9 Renewable and Non-renewable resources thermal, hydel, solar, wind, tidal, geothermal and nuclear Indian energy scenario. Power Plants - Steam, gas turbine, diesel, nuclear and hydel power plants Layout, major components and working, Choice of the type of plant, Combined cycles, cogeneration, Importance of Energy storage, Environmental constraints of power generation using fossil fuels and nuclear energy. Steam generators - Classification, working or Cochran, Babcock Wilcox, Lamont and Benson boilers, Principles and features of modern high pressure boiler tower type boilers. (A separate study of boiler mountings and accessories are beyond the scope of this course). UNIT II MARINE I.C. ENGINES 9 Classification, Working principles of petrol and diesel engines - two stroke and four stroke cycles, functions of main components, Carburetion - Single jet Carburetor, mixture strength, Ignition system of petrol engine, Fuel pump and injector of diesel engine, Cooling system necessity, air and liquid cooling, optimum cooling, Lubrication system purpose and methods of lubrication, lubrication oil classification and selection. UNIT III MARINE REFRIGERATION & AIR CONDITIONING 9 Refrigeration application and types, Vapour compression refrigeration system working principles and features, working fluids. Air conditioning requirement of conditioned air, summer and winter air conditioning, layout of a typical window air conditioner, Thermoelectric cooling. UNIT IV METAL FORMING, METAL JOINING PROCESSES 9 Metal forming Principles of forging mechanical power hammers Hot and Cold forging processes rolling, drawing and extrusion, Metal joining processes flexible and permanent, Principles of welding Fundamentals of arc welding, gas welding and gas cutting, Brazing and Soldering UNIT V POWER TRANSMISSION 9 Brief introduction to belt and rope drives. Simple and compound gear trains. Machine Tool Engineering - Main Components and functions of lathe, drilling, shaping, planning and milling machines. Introduction to CAD, CAM, CIM and ROBOT. TOTAL: 45 PERIODS TEXT BOOKS: 1. Taylor, Introduction to Marine engineering, 2nd Edition, Butterworth Heinemann, London, 1999 2. Shanmugam.G., Basic Mechanical Engineering 3rd Edition, TATA McGraw-Hill, New Delhi, Year 2000 REFERENCES: 1. Venugopal K., Basic Mechanical Engineering, Fourth Edition, Anuradha Agencies, Chennai, Year 1994. 2. Duraivelu. K., Richard. S., Basic Mechanical Engineering, 2nd Edition, Dear Publication, Chennai, 2001. 3. Leslie Jackson and Thomas D. Morton, Reeds General Engineering Knowledge for Marine Engineers.

Page 10 of 23

www.annaunivedu.org

GE6161

COMPUTER PRACTICES LABORATORY

L T P C 0 0 3 2

LIST OF EXPERIMENTS: 1. Search, generate, manipulate data using MS office/ Open Office 2. Presentation and Visualization graphs, charts, 2D, 3D 3. Problem formulation, Problem Solving and Flowcharts 4. C Programming using Simple statements and expressions 5. Scientific problem solving using decision making and looping. 6. Simple programming for one dimensional and two dimensional arrays. 7. Solving problems using String functions 8. Programs with user defined functions Includes Parameter Passing 9. Program using Recursive Function and conversion from given program to flow chart. 10. Program using structures and unions. TOTAL : 45 PERIODS

GE6163

PHYSICS AND CHEMISTRY LABORATORY I PHYSICS LABORATORY I LIST OF EXPERIMENTS (Any FIVE Experiments)

L T P C 0 0 2 1

(a) Determination of Wavelength, and particle size using Laser (b) Determination of acceptance angle in an optical fiber. 2. Determination of velocity of sound and compressibility of liquid Ultrasonic interferometer. 3. Determination of wavelength of mercury spectrum spectrometer grating 4. Determination of thermal conductivity of a bad conductor Lees Disc method. 5. Determination of Youngs modulus by Non uniform bending method 6. Determination of specific resistance of a given coil of wire Carey Fosters Bridge

1.

CHEMISTRY LABORATORY-I LIST OF EXPERIMENTS (Any FIVE Experiments) 1 2 3 4 5 6 7 Determination of DO content of water sample by Winklers method. Determination of chloride content of water sample by argentometric method Determination of strength of given hydrochloric acid using pH meter Determination of strength of acids in a mixture using conductivity meter Estimation of iron content of the water sample using spectrophotometer (1,10- phenanthroline / thiocyanate method) Determination of molecular weight of polyvinylalcohol using Ostwald viscometer Conductometric titration of strong acid vs strong base TOTAL: 30 PERIODS

10

Page 11 of 23

www.annaunivedu.org

REFERENCES: 1. Daniel R. Palleros, Experimental organic chemistry John Wiley & Sons, Inc., New York (2001). 2. Furniss B.S. Hannaford A.J, Smith P.W.G and Tatchel A.R., Vogels Textbook of practical organic chemistry, LBS Singapore (1994). 3. Jeffery G.H., Bassett J., Mendham J.and Denny vogels R.C, Text book of quantitative analysis chemical analysis, ELBS 5th Edn. Longman, Singapore publishers, Singapore, 1996. 4. Kolthoff I.M., Sandell E.B. et al. Quantitative chemical analysis, Mcmillan, Madras 1980.

MV6111

MARINE ENGINEERING PRACTICES LABORATORY

L T P C 0 0 4 2

OBJECTIVES To provide exposure to the students with hands on experience on various basic engineering practices in Civil, Mechanical, Electrical and Electronics Engineering. GROUP A (CIVIL & MECHANICAL) I CIVIL ENGINEERING PRACTICE 10

Buildings: (a) Study of plumbing and carpentry components of residential and industrial buildings. Safety aspects. Plumbing Works: (a) Study of pipeline joints, its location and functions: valves, taps, couplings, unions, reducers, elbows in household fittings. (b) Study of pipe connections requirements for pumps and turbines. (c) Preparation of plumbing line sketches for water supply and sewage works. (d) Hands-on-exercise: Basic pipe connections Mixed pipe material connection Pipe connections with different joining components. (e) Demonstration of plumbing requirements of high-rise buildings. Carpentry using Power Tools only: (a) Study of the joints in roofs, doors, windows and furniture. (b) Hands-on-exercise: Wood work, joints by sawing, planing and cutting.

II

MECHANICAL ENGINEERING PRACTICE

20

Welding: (a) Preparation of arc welding of butt joints, lap joints and tee joints. (b) Gas welding practice

11

Page 12 of 23

www.annaunivedu.org
Basic Machining: (a) Simple Turning and Taper turning (b) Drilling Practice Sheet Metal Work: (a) Forming & Bending: (b) Model making Trays, funnels, cones etc. (c) Different type of joints. Machine assembly practice: (a) Study of centrifugal pump (b) Study of air conditioner Fitting Exercises Preparation of square fitting and vee fitting models Smithy and foundry (a) Smithy operations, upsetting, swaging, setting down and bending. Example Exercise Production of hexagonal headed bolt. (b) Foundry operations like mould preparation for gear and step cone pulley. . GROUP B (ELECTRICAL & ELECTRONICS) III ELECTRICAL ENGINEERING PRACTICE 18 1. Residential house wiring using switches, fuse, indicator, lamp and energy meter. 2. Fluorescent lamp wiring. 3. Stair case wiring 4. Measurement of electrical quantities voltage, current, power & power factor in RLC circuit. 5. Measurement of energy using single phase energy meter. 6. Measurement of resistance to earth of an electrical equipment.

ELECTRONICS ENGINEERING PRACTICE 12 1. Study of Electronic components and equipments Resistor, colour coding measurement of AC signal parameter (peak-peak, rms period, frequency) using CR. 2. Study of logic gates AND, OR, EOR and NOT. 3. Generation of Clock Signal. 4. Soldering practice Components Devices and Circuits Using general purpose PCB. 5. Measurement of ripple factor of HWR and FWR. TOTAL: 60 PERIODS REFERENCES: 1. K.Jeyachandran, S.Natarajan & S, Balasubramanian, A Primer on Engineering Practices Laboratory, Anuradha Publications, (2007). 2. T.Jeyapoovan, M.Saravanapandian & S.Pranitha, Engineering Practices Lab Manual, Vikas Puplishing House Pvt.Ltd, (2006) 3. H.S. Bawa, Workshop Practice, Tata McGraw Hill Publishing Company Limited, (2007). 4. A.Rajendra Prasad & P.M.M.S. Sarma, Workshop Practice, Sree Sai Publication, (2002). 5. P.Kannaiah & K.L.Narayana, Manual on Workshop Practice, Scitech Publications, (1999).

IV

12

Page 13 of 23

www.annaunivedu.org
II SEMESTER SYLLABI HS6252 TECHNICAL ENGLISH FOR MARINE ENGINEERING L T P C 3 1 0 4

OBJECTIVES: To help students develop listening skills for academic and professional purposes. To help students acquire the ability to speak effectively in English in real-life situations. To inculcate reading habit and to develop effective reading skills. To help students improve their active and passive vocabulary. To familiarize students with different rhetorical functions of scientific English. To enable students write letters and reports effectively in formal and business situations. To understand and use technical and engineering publications UNIT I 12 Technical Vocabulary - meanings in context, sequencing words, Articles- Prepositions, intensive reading& predicting content, Reading and interpretation, extended definitions, Process description Suggested activities: 1. Exercises on word formation using the prefix self - Gap filling with preposition. 2. Exercises - Using sequence words. 3. Reading comprehension exercise with questions based on inference Reading headings 4. and predicting the content Reading advertisements and interpretation. 5. Writing extended definitions Writing descriptions of processes Writing paragraphs based on discussions Writing paragraphs describing the future. UNIT II 12 Phrases / Structures indicating use / purpose Adverbs-Skimming Non-verbal communication - Listening correlating verbal and non-verbal communication -Speaking in group discussions Formal Letter writing Writing analytical paragraphs. Suggested activities: 1. Reading comprehension exercises with questions on overall content Discussions analyzing stylistic features (creative and factual description) - Reading comprehension exercises with texts including graphic communication - Exercises in interpreting nonverbal communication. 2. Listening comprehension exercises to categorise data in tables. 3. Writing formal letters, quotations, clarification, complaint Letter seeking permission for Industrial visits Writing analytical paragraphs on different debatable issues. UNIT III 12 Cause and effect expressions Different grammatical forms of the same word - Speaking stress and intonation, Group Discussions - Reading Critical reading - Listening, - Writing using connectives, report writing types - accident, survey, breakdown of machinery, Letter to superintendant reporting the defects, damage and repair of machinery ; requirement of machinery spares,logistic and repair support on arrival at the harbour; monthly report on the condition of men and machinery. structure, data collection, content, form, recommendations . Suggested activities: 1. Exercises combining sentences using cause and effect expressions Gap filling exercises using the appropriate tense forms Making sentences using different grammatical forms of the same word. ( Eg: object verb / object noun ) 2. Speaking exercises involving the use of stress and intonation Group discussions analysis of problems and offering solutions. 3. Reading comprehension exercises with critical questions, Multiple choice question. 4. Sequencing of jumbled sentences using connectives Writing different types of reports like industrial accident report and survey report Writing recommendations.

Page 14 of 23

www.annaunivedu.org
UNIT IV 12 Numerical adjectives Oral instructions Descriptive writing Argumentative paragraphs Letter of application - content, format (CV / Bio-data) - Instructions, imperative forms Checklists, Yes/No question form E-mail communication. Suggested Activities: 1. Rewriting exercises using numerical adjectives. 2. Reading comprehension exercises with analytical questions on content Evaluation of content. 3. Listening comprehension entering information in tabular form, intensive listening exercise and completing the steps of a process. 4. Speaking - Role play group discussions Activities giving oral instructions. 5. Writing descriptions, expanding hints Writing argumentative paragraphs Writing formal letters Writing letter of application with CV/Bio-data Writing general and safety instructions Preparing checklists Writing e-mail messages. UNIT V 9 Speaking - Discussion of Problems and solutions - Creative and critical thinking Writing an essay, Writing a proposal. Suggested Activities: 1. Case Studies on problems and solutions 2. Brain storming and discussion 3. Writing Critical essays 4. Writing short proposals of 2 pages for starting a project, solving problems, etc. 5. Writing advertisements. TOTAL: 60 PERIODS TEXT BOOK: 1. Chapters 5 8. Department of Humanities & Social Sciences, Anna University, English for Engineers and Technologists Combined Edition (Volumes 1 & 2), Chennai: Orient Longman Pvt. Ltd., 2006. Themes 5 8 (Technology, Communication, Environment, Industry) REFERENCES: 1. Dutt P.K, Rajeevan G. and Prakash C.L.N, A Course in Communication Skills, Cambridge University Press, India 2007. 2. Krishna Mohan and Meera Banerjee, Developing Communication Skills, Macmillan India Ltd., (Reprinted 1994 2007). 3. Edgar Thorpe, Showick Thorpe, Objective English, Second Edition, Pearson Education, 2007. EXTENSIVE READING: 1. Robin Sharma, The Monk Who Sold His Ferrari, Jaico Publishing House, 2007 NOTE: The book listed under Extensive Reading is meant for inculcating the reading habit of the students. They need not be used for testing purposes.

Page 15 of 23

www.annaunivedu.org
MA6252 UNIT I MATHEMATICS FOR MARINE ENGINEERING II L T P C 3 1 0 4

ORDINARY DIFFERENTIAL EQUATIONS FIRST ORDER AND APPLICATIONS 12 Definition, order and degree, formation of differential equation. Solution of first order, first degree equations in variable separable form, homogeneous equations, other substitutions, Equations reducible to homogeneous and exact differential equations. Equations reducible to exact Integration Factor, Linear differential equation of first order first degree, reducible to linear, Applications to electrical circuits and orthogonal trajectories UNIT II ORDINARY DIFFERENTIAL EQUATIONS HIGHER ORDER AND APPLICATIONS 12 Higher (nth) order linear differential equations - definition and complementary solution, Methods of obtaining PI, Method of variation of parameters, Method of undetermined coefficients, Cauchys Homogeneous LDE and Legendres equations, System of Ordinary Differential Equations Simultaneous equations in symmetrical form , Applications to deflection of beams, struts and columns. Applications to electrical circuits and coupled circuits UNIT III VECTOR CALCULUS 12 Gradient Divergence and Curl Directional derivative Irrotational and solenoidal vector fields Vector integration Greens theorem in a plane, Gauss divergence theorem and stokes theorem (excluding proofs) Simple applications involving cubes and rectangular parallelopipeds. UNIT IV ANALYTIC FUNCTIONS 12 Functions of a complex variable Analytic functions Necessary conditions, Cauchy Riemann equation and Sufficient conditions (excluding proofs) Harmonic and orthogonal properties of analytic function Harmonic conjugate Construction of analytic functions Conformal mapping : w= z+c, cz, 1/z, and bilinear transformation. UNIT V LAPLACE TRANSFORM 12 Laplace transform Conditions for existence Transform of elementary functions Basic properties Transform of derivatives and integrals Transform of unit step function and impulse functions Transform of periodic functions. Definition of Inverse Laplace transform as contour integral Convolution theorem (excluding proof) Initial and Final value theorems Solution of linear ODE of second order with constant coefficients using Laplace transformation techniques. TOTAL: 60 PERIODS TEXT BOOK: 1. Bali N. P and Manish Goyal, Text book of Engineering Mathematics, 3 Edition, Laxmi Publications (p) Ltd., (2008). 2. Grewal. B.S, Higher Engineering Mathematics, 40 Edition, Khanna Publications, Delhi, (2007). REFERENCES: 1. Ramana B.V, Higher Engineering Mathematics,Tata McGraw Hill Publishing Company, New Delhi, (2007). 2. Glyn James, Advanced Engineering Mathematics, 3 (2007).
rd th rd

Edition, Pearson Education,

3. Erwin Kreyszig, Advanced Engineering Mathematics, 7 Edition, Wiley India, (2007). rd 4. Jain R.K and Iyengar S.R.K, Advanced Engineering Mathematics, 3 Edition, Narosa Publishing House Pvt. Ltd., (2007).

th

Page 16 of 23

www.annaunivedu.org
PH6251 OBJECTIVE: ENGINEERING PHYSICS II L T P C 3 0 0 3

To enrich the understanding of various types of materials and their applications in engineering and technology.

UNIT I CONDUCTING MATERIALS 9 Conductors classical free electron theory of metals Electrical and thermal conductivity Wiedemann Franz law Lorentz number Draw backs of classical theory Quantum theory Fermi distribution function Effect of temperature on Fermi Function Density of energy states carrier concentration in metals. UNIT II SEMICONDUCTING MATERIALS 9 Intrinsic semiconductor carrier concentration derivation Fermi level Variation of Fermi level with temperature electrical conductivity band gap determination compound semiconductors -direct and indirect band gap- derivation of carrier concentration in n-type and p-type semiconductor variation of Fermi level with temperature and impurity concentration Hall effect Determination of Hall coefficient Applications. UNIT III MAGNETIC AND SUPERCONDUCTING MATERIALS 9 Origin of magnetic moment Bohr magneton comparison of Dia, Para and Ferro magnetism Domain theory Hysteresis soft and hard magnetic materials antiferromagnetic materials Ferrites and its applications Superconductivity : properties Type I and Type II superconductors BCS theory of superconductivity(Qualitative) - High Tc superconductors Applications of superconductors SQUID, cryotron, magnetic levitation. UNIT IV DIELECTRIC MATERIALS 9 Electrical susceptibility dielectric constant electronic, ionic, orientational and space charge polarization frequency and temperature dependence of polarisation internal field Claussius Mosotti relation (derivation) dielectric loss dielectric breakdown uses of dielectric materials (capacitor and transformer) ferroelectricity and applications. UNIT V ADVANCED ENGINEERING MATERIALS 9 Metallic glasses: preparation, properties and applications. Shape memory alloys (SMA): Characteristics, properties of NiTi alloy, application, Nanomaterials Preparation -pulsed laser deposition chemical vapour deposition Applications NLO materials Birefringence- optical Kerr effect Classification of Biomaterials and its applications TOTAL: 45 PERIODS TEXT BOOKS: 1. Arumugam M., Materials Science. Anuradha publishers, 2010 2. Pillai S.O., Solid State Physics. New Age International(P) Ltd., publishers, 2009 REFERENCES: 1. Palanisamy P.K. Materials Science. SCITECH Publishers, 2011 2. Senthilkumar G. Engineering Physics II. VRB Publishers, 2011 3. Mani P. Engineering Physics II. Dhanam Publications, 2011 4. Marikani A. Engineering Physics. PHI Learning Pvt., India, 2009

Page 17 of 23

www.annaunivedu.org
GE6252 L T P C 4 0 0 4 UNIT I ELECTRICAL CIRCUITS & MEASURMENTS 12 Ohms Law Kirchoffs Laws Steady State Solution of DC Circuits Introduction to AC Circuits Waveforms and RMS Value Power and Power factor Single Phase and Three Phase Balanced Circuits. Operating Principles of Moving Coil and Moving Iron Instruments (Ammeters and Voltmeters), Dynamometer type Watt meters and Energy meters. UNIT II ELECTRICAL MECHANICS 12 Construction, Principle of Operation, Basic Equations and Applications of DC Generators, DC Motors, Single Phase Transformer, single phase induction Motor. UNIT III SEMICONDUCTOR DEVICES AND APPLICATIONS 12 Characteristics of PN Junction Diode Zener Effect Zener Diode and its Characteristics Half wave and Full wave Rectifiers Voltage Regulation. Bipolar Junction Transistor CB, CE, CC Configurations and Characteristics Elementary Treatment of Small Signal Amplifier. UNIT IV DIGITAL ELECTRONICS 12 Binary Number System Logic Gates Boolean Algebra Half and Full Adders Flip-Flops Registers and Counters A/D and D/A Conversion (single concepts) UNIT V FUNDAMENTALS OF COMMUNICATION ENGINEERING 12 Types of Signals: Analog and Digital Signals Modulation and Demodulation: Principles of Amplitude and Frequency Modulations. Communication Systems: Radio, TV, Fax, Microwave, Satellite and Optical Fibre (Block Diagram Approach only). TOTAL: 60 PERIODS TEXT BOOKS: 1. Mittle N., Basic Electrical Engineering, Tata McGraw Hill Edition, New Delhi, 1990. 2. Sedha R.S., Applied Electronics, S. Chand & Co., 2006. REFERENCES: 1. Muthusubramanian R, Salivahanan S and Muraleedharan K A, Basic Electrical, Electronics and Computer Engineering, Tata McGraw Hill, Second Edition, (2006). 2. Nagsarkar T K and Sukhija M S, Basics of Electrical Engineering, Oxford press (2005). 3. Mehta V K, Principles of Electronics, S.Chand & Company Ltd, (1994). 4. Mahmood Nahvi and Joseph A. Edminister, Electric Circuits, Schaum Outline Series, McGraw Hill, (2002). 5. Premkumar N, Basic Electrical Engineering, Anuradha Publishers, (2003). BASIC ELECTRICAL AND ELECTRONICS ENGINEERING

GE6253

ENGINEERING MECHANICS

L T P C 3 1 0 4

OBJECTIVES To develop capacity to predict the effect of force and motion in the course of carrying out the design functions of engineering UNIT I BASICS AND STATICS OF PARTICLES 12 Introduction Units and Dimensions Laws of Mechanics Lamis theorem, Parallelogram and triangular Law of forces Vectorial representation of forces Vector operations of forces -additions, subtraction, dot product, cross product Coplanar Forces rectangular components Equilibrium of a particle Forces in space Equilibrium of a particle in space Equivalent systems of forces Principle of transmissibility .

Page 18 of 23

www.annaunivedu.org
UNIT II EQUILIBRIUM OF RIGID BODIES 12 Free body diagram Types of supports Action and reaction forces stable equilibrium Moments and Couples Moment of a force about a point and about an axis Vectorial representation of moments and couples Scalar components of a moment Varignons theorem Single equivalent force -Equilibrium of Rigid bodies in two dimensions Equilibrium of Rigid bodies in three dimensions UNIT III PROPERTIES OF SURFACES AND SOLIDS 12 Centroids and centre of mass Centroids of lines and areas - Rectangular, circular, triangular areas by integration T section, I section, - Angle section, Hollow section by using standard formula Theorems of Pappus - Area moments of inertia of plane areas Rectangular, circular, triangular areas by integration T section, I section, Angle section, Hollow section by using standard formula Parallel axis theorem and perpendicular axis theorem Principal moments of inertia of plane areas Principal axes of inertia-Mass moment of inertia mass moment of inertia for prismatic, cylindrical and spherical solids from first principle Relation to area moments of inertia. UNIT IV DYNAMICS OF PARTICLES 12 Displacements, Velocity and acceleration, their relationship Relative motion Curvilinear motion -Newtons laws of motion Work Energy Equation Impulse and Momentum Impact of elastic bodies. UNIT V FRICTION AND ELEMENTS OF RIGID BODY DYNAMICS 12 Friction force Laws of sliding friction equilibrium analysis of simple systems with sliding friction wedge friction-. Rolling resistance -Translation and Rotation of Rigid Bodies Velocity and acceleration General Plane motion of simple rigid bodies such as cylinder, disc/wheel and sphere. TOTAL: 60 PERIODS TEXT BOOKS: 1. Beer, F.P and Johnston Jr. E.R., Vector Mechanics for Engineers (In SI Units): Statics and Dynamics, 8th Edition, Tata McGraw-Hill Publishing company, New Delhi (2004). 2. Vela Murali, Engineering Mechanics, Oxford University Press (2010) REFERENCES: 1. Hibbeller, R.C and Ashok Gupta, Engineering Mechanics: Statics and Dynamics, 11th Edition, Pearson Education (2010). 2. Irving H. Shames and Krishna Mohana Rao. G., Engineering Mechanics Statics and Dynamics, 4th Edition, Pearson Education (2006) 3. Meriam J.L. and Kraige L.G., Engineering Mechanics- Statics - Volume 1, DynamicsVolume 2, Third Edition, John Wiley & Sons,(1993) 4. Rajasekaran S and Sankarasubramanian G., Engineering Mechanics Statics and Dynamics, 3rd Edition, Vikas Publishing House Pvt. Ltd., (2005). 5. Bhavikatti, S.S and Rajashekarappa, K.G., Engineering Mechanics, New Age International (P) Limited Publishers, (1998). 6. Kumar, K.L., Engineering Mechanics, 3rd Revised Edition, Tata McGraw-Hill Publishing company, New Delhi (2008)

Page 19 of 23

www.annaunivedu.org
MV6201 MARINE ENGINEERING THERMODYNAMICS L T P C 3 0 0 3

OBJECTIVES At the end of the study of this topic the students should have the knowledge on basic Thermodynamics and solve the problems on First and Second Law of Thermodynamics and Gas power cycles. Also should have the knowledge on fuel used in IC Engines and Combustion of Fuels. UNIT I BASIC CONCEPTS AND FIRST LAW OF THERMODYNAMICS 9 Thermodynamic systems, concepts of continuum, thermodynamic properties, equilibrium, processes, cycle, work, heat, temperature, Zeroth law of thermodynamics. First law of thermodynamics applications to closed and open systems, internal energy, specific heats, enthalpy,. applications to steady and unsteady flow conditions. UNIT II BASIC CONCEPTS OF SECOND LAW OF THERMODYNAMICS 9 Thermodynamic systems, Second law of thermodynamics Statements, Reversibility, causes of irreversibility, Carnot cycle, reversed Carnot cycle, heat engines, refrigerators, and heat pumps. Clausius inequality, entropy, principles of increase in entropy, Carnot theorem, available energy, availability. UNIT III FLUID CYCLES 9 Thermo dynamic properties of pure substances, property diagram, PVT surface of water and other substances, calculation of properties, first law and second law analysis using tables and charts, UNIT IV GAS POWER CYCLES 9 properties of ideal and real gases, equation of state, gas laws. Gas power cycles Carnot, Otto, Diesel, Dual, Brayton, Ericsson, Sterling, Lenoir, Atkinson Cycles. UNIT V THERMODYNAMIC RELATIONS AND COMBUSTION OF FUELS 9 Exact differentials, T-D diagrams, Maxwell relations, Clasius Claperon Equations, JouleThomson coefficients. Heat value of fuels, Combustion equations, Theoretical and excess air, Air fuel ratio and Exhaust gas analysis TOTAL : 45 PERIODS TEXT BOOKS 1. Nag, P.K., Engineering Thermodynamics, 1st Edition, Tata McGraw-Hill Publishing Company Limited New Delhi, 1993. 2. Russel, Engineering Thermodynamics, 1st Edition, Oxford University Press, 2007 REFERENCES 1. Holmann, Thermodynamics, 4th Edition, McGraw-Hill Book Company,New York,1888. 2. Rao, Y.V.C., Thermodynamics,4th Edition,Wiley Eastern Ltd.,New Delhi,1993. 3. Wlliam Embleton obe., Applied Heat for Engineers, Reeds Marine Engineering Series,Vol.3,Thomas Reed Publication, Reprint 1999

GE6261

COMPUTER AIDED DRAFTING AND MODELING LABORATORY

L T P C 0 1 2 2

List of Exercises using software capable of Drafting and Modeling 1. Study of capabilities of software for Drafting and Modeling Coordinate systems (absolute, relative, polar, etc.) Creation of simple figures like polygon and general multi-line figures. 2. Drawing of a Title Block with necessary text and projection symbol.

Page 20 of 23

www.annaunivedu.org
3. Drawing of curves like parabola, spiral, involute using Bspline or cubic spline. 4. Drawing of front view and top view of simple solids like prism, pyramid, cylinder, cone, etc, and dimensioning. 5. Drawing front view, top view and side view of objects from the given pictorial views (eg. V-block, Base of a mixie, Simple stool, Objects with hole and curves). 6. Drawing of a plan of residential building ( Two bed rooms, kitchen, hall, etc.) 7. Drawing of a simple steel truss. 8. Drawing sectional views of prism, pyramid, cylinder, cone, etc, 9. Drawing isometric projection of simple objects. 10. Creation of 3-D models of simple objects and obtaining 2-D multi-view drawings from 3D model. Note: Plotting of drawings must be made for each exercise and attached to the records written by students. List of Equipments for a batch of 30 students: 1. Pentium IV computer or better hardware, with suitable graphics facility -30 No. 2. Licensed software for Drafting and Modeling. 30 Licenses 3. Laser Printer or Plotter to print / plot drawings 2 No. TOTAL: 45 PERIODS

GE6262

PHYSICS AND CHEMISTRY LABORATORY II

L T P C 0 0 2 1

PHYSICS LABORATORY II (Any FIVE Experiments) 1. 2. 3. 4. 5. 6. Determination of Youngs modulus by uniform bending method Determination of band gap of a semiconductor Determination of Coefficient of viscosity of a liquid Poiseuilles method Determination of Dispersive power of a prism - Spectrometer Determination of thickness of a thin wire Air wedge method Determination of Rigidity modulus Torsion pendulum

CHEMISTRY LABORATORY -II (Any FIVE Experiments) 1 2 3 4 5 6 7 8 Determination of alkalinity in water sample Determination of total, temporary & permanent hardness of water by EDTA method Estimation of copper content of the given solution by EDTA method Estimation of iron content of the given solution using potentiometer Estimation of sodium present in water using flame photometer Corrosion experiment weight loss method Conductometric precipitation titration using BaCl2 and Na2SO4 Determination of CaO in Cement. TOTAL : 30 PERIODS

Page 21 of 23

www.annaunivedu.org
REFERENCES: 1. Daniel R. Palleros, Experimental organic chemistry John Wiley & Sons, Inc., New York (2001). 2. Furniss B.S. Hannaford A.J, Smith P.W.G and Tatchel A.R., Vogels Textbook of practical organic chemistry, LBS Singapore (1994). 3. Jeffery G.H, Bassett J., Mendham J. and Denny R.C., Vogels Text book of quantitative analysis chemical analysis, ELBS 5th Edn. Longman, Singapore publishers, Singapore, 1996. 4. Kolthoff I.M. and Sandell E.B. et al. Quantitative chemical analysis, Mcmillan, Madras 1980 Laboratory classes on alternate weeks for Physics and Chemistry.

GE6263

COMPUTER PROGRAMMING LABORATORY LIST OF EXPERIMENTS

L T P C 0 1 2 2

1. UNIX COMMANDS Study of Unix OS - Basic Shell Commands - Unix Editor 2. SHELL PROGRAMMING Simple Shell program - Conditional Statements - Testing and Loops 3. C PROGRAMMING ON UNIX Dynamic Storage Allocation-Pointers-Functions-File Handling

15

15

15 TOTAL: 45 PERIODS

HARDWARE / SOFTWARE REQUIREMENTS FOR A BATCH OF 30 STUDENTS Hardware UNIX Clone Server 33 Nodes (thin client or PCs) Printer 3 Nos. Software OS UNIX Clone (33 user license or License free Linux) Compiler - C

MV6211

WORKSHOP FITTING

L T P C 0 0 4 2

AIM: To impart knowledge on the Fitting methods of Metal joining Process OBJECTIVES: On Completion of the Course The Students are expected to have the Knowledge of Metal Cutting and Joining Process Tools and equipments used in Smithy, Carpentry, Fitting, Foundry, Welding and Sheet Metal.

Page 22 of 23

www.annaunivedu.org
LIST OF EXPERIMENTS SHEET METAL Fabrication of tray, cone etc. with sheet metal. 20

WELDING 20 Arc Welding of butt joint, Lap joint, Tee fillet etc. Demonstration of gas welding. FITTING 20 Practice in chipping, filing, drilling Making Vee, square and dove tail joints. TOTAL: 60 PERIODS REFERENCES: 1. V.S.Venkatachalapathy, First Year Engineering Workshop Practice, Raamalinga Publications, Madurai, 1999. 2. P.Kannaiah and K.C.Narayana, Manual on Workshop Practice, Scitech Publications, Chennai, 1999.

10

Page 23 of 23