User Manual: D1650iD/D2050iD

4034-7707-01
D1650iD/D2050iD
User Manual
Contents
Contents
1 Introduction
1.1 1.2 1.3 Introduction ...................................................................................1-2 We Want You to Be a Satisfied Customer..................................1-2 Explanation of Manual Conventions ...........................................1-3 Explanation of Basic Concepts and Symbols ............................1-4 Paper Feeding ............................................................................1-4 Width and Length...................................................................1-5 Paper Orientation .......................................................................1-5 Energy Star ..................................................................................1-6 What is an ENERGY STAR Product? ......................................1-6 Safety Information.........................................................................1-7 Warning and Precaution Symbols ..............................................1-7 Meaning of Symbols ...................................................................1-7 WARNING ..................................................................................1-8 CAUTION ...................................................................................1-9 Precautions for Routine Use.....................................................1-10 USER INSTRUCTIONS CE Marking (Declaration of Conformity) for Users of the European Union (EU) ...............................................................1-10 For users in countries subject to Class B regulations...............1-11 For users in countries not subject to Class B regulations.........1-11 Laser Safety .............................................................................1-12 Laser Safety Label....................................................................1-15 Ozone Release.........................................................................1-15
1.4 1.5
Precautions
2.1 Installation Precautions................................................................2-2 Installation Site ...........................................................................2-2 Power Source .............................................................................2-2 Space Requirements ..................................................................2-3 Operation Precautions..................................................................2-4 Operating Environment...............................................................2-4 Proper Use .................................................................................2-4 Transporting the Machine...........................................................2-5 Care of Machine Supplies ..........................................................2-5 Storage of Copies.......................................................................2-6 Legal Restrictions on Copying ....................................................2-7 Components and Their Functions...............................................2-8
2.2
2.3 2.4
D1650iD/D2050iD
Contents 2.5 Part Names and Their Functions .............................................. 2-10 Main Unit.................................................................................. 2-10 Inside of Main Unit ................................................................... 2-12 Document Feeder (Optional) ................................................... 2-13 Multiple Bypass (Optional) ....................................................... 2-14 Paper Feed Unit (Optional) ...................................................... 2-15 Job Separator (Optional).......................................................... 2-16 Names of Control Panel Parts and Their Functions................ 2-17 Control Panel Parts and Their Functions ................................. 2-17 Display Indications ................................................................... 2-20 Adjusting the Angle of the Display ........................................... 2-21 Power Supply.............................................................................. 2-22 To turn on the machine ............................................................ 2-22 To turn off the machine ............................................................ 2-22 Default Settings........................................................................ 2-22 Auto Panel Reset ..................................................................... 2-23 Energy Save Mode .................................................................. 2-23 Auto Shut Off ........................................................................... 2-23 Queued Copy Jobs .................................................................. 2-24
2.6
2.7
Basic Operations
3.1 3.2 Making Copies .............................................................................. 3-2 To make a simple copy .............................................................. 3-2 Loading Paper............................................................................... 3-4 Loading Paper Into the Paper Tray............................................ 3-5 To load paper into the 1st Tray .................................................. 3-5 To load paper into the 2nd Tray................................................. 3-7 Loading the Document................................................................. 3-9 With the Document Feeder ........................................................ 3-9 With the Original Glass ............................................................ 3-11 To position sheet documents ................................................... 3-11 To position translucent or transparent documents................... 3-13 To position a book.................................................................... 3-15 To load documents of mixed sizes........................................... 3-16 Stopping/Restarting/Cancelling a Copy Job............................ 3-18 Confirmation Mode..................................................................... 3-19 To check the counters.............................................................. 3-20 Reducing Electricity Usage ....................................................... 3-22
3.3
3.4 3.5 3.6
ii
D1650iD/D2050iD
Contents
Useful Operations
4.1 Specifying a Zoom setting ...........................................................4-2 To enlarge/reduce a standard-sized document to a different standard size ..............................................................................4-2 Using the Auto/Photo Function................................................4-4 To make sharp copies of illustrations or photos .........................4-4 Copying Onto Various Types of Media .......................................4-6 To copy onto OHP transparencies .............................................4-6 To copy onto label sheets...........................................................4-8 To copy onto envelopes (non-standard size) ...........................4-11 To copy onto postcards ............................................................4-14
4.2 4.3
Before Making Copies

5.1 Paper ..............................................................................................5-2 Paper Types ...............................................................................5-2 Paper Sizes ................................................................................5-3 Paper Capacity ...........................................................................5-4 Unsuitable Paper ........................................................................5-5 Print Area .......................................................................................5-6 Paper Storage................................................................................5-7 Making Copies on Manually Fed Paper.......................................5-8 Paper That Can Be Fed Manually ..............................................5-8 Adjusting the Multiple Bypass.....................................................5-9 Loading Paper Into the Bypass Trays ......................................5-10 To load plain paper...................................................................5-10 Loading Special Paper Into the Bypass Trays..........................5-11 To load postcards .....................................................................5-11 To load envelopes ....................................................................5-12 To load OHP transparencies ....................................................5-14 To load label sheets .................................................................5-15 Copying Onto Manually Fed Paper ..........................................5-16 To copy using the Manual Bypass............................................5-16 To copy using the Multiple Bypass ...........................................5-19 Selecting the Paper Source........................................................5-22 To make copies using the Auto Paper function ........................5-22 To copy with a manually selected paper size ...........................5-23 To load special paper into the 1st Tray ....................................5-24 Automatically Selecting the Paper Source ...............................5-25 Order for Automatically Switching Paper Drawers ...................5-26
5.2 5.3 5.4
5.5
D1650iD/D2050iD
iii
Contents 5.6 Original Documents ................................................................... 5-27 Using the Document Feeder .................................................... 5-27 Document Types ...................................................................... 5-27 Documents of Uniform Sizes ................................................... 5-28 Mixed Width Document Sizes (AFR-19) .................................. 5-28 Precautions Concerning the Documents ................................. 5-29 Specifying a Zoom Setting ........................................................ 5-30 Zoom Settings .......................................................................... 5-30 To make copies using the AUTO zoom setting ..................... 5-31 To make copies using a fixed zoom setting ............................. 5-32 To make copies using a specific zoom setting......................... 5-33 To make copies using the X/Y Zoom function ....................... 5-34 Specifying the Copy Density (Auto/Photo Function) .......... 5-36 To make copies after specifying a copy density ...................... 5-37 Interrupting Copy Jobs .............................................................. 5-38 To interrupt a copy job ............................................................. 5-38
5.7
5.8 5.9
Advanced Copy Operations

6.1 Single-Sided Copies..................................................................... 6-2 To make copies using the 2in1 (or 4in1) copy function ......... 6-2 To make copies using the Book Separation function .............. 6-4 Double-Sided Copies ................................................................... 6-6 Double-sided copying is not possible under the following conditions:.................................................................................. 6-7 To make double-sided copies using the Original Glass ............. 6-8 To make double-sided copies using the Document Feeder....... 6-9 Finishing Copies (Sort and Group functions) .................. 6-10 Notes on Using the Sort and Group Functions ................... 6-12 Shift Sorting ............................................................................. 6-12 Crisscross Sorting .................................................................... 6-12 Shift Grouping .......................................................................... 6-13 Crisscross Grouping ................................................................ 6-13 Specifying Finishing ................................................................. 6-14 To make copies using a Finishing function .............................. 6-14 Erasing Sections of Copies ....................................................... 6-15 Precautions on the Erased Margin Location ............................ 6-15 To make copies using an Erase setting ................................... 6-16 Negative/Positive Inverted Copying ......................................... 6-17 To make copies using the negative/positive inverted copy function .................................................................................... 6-17
6.2
6.3
6.4
6.5
iv
D1650iD/D2050iD
Contents 6.6 Making Copies for Filing (File Margin function) ...................6-18 Precautions on the Binding Margin Location ............................6-18 To make copies using the File Margin function......................6-19 Programmed Copy Jobs.............................................................6-20 To store a copy program ..........................................................6-20 To recall a copy program..........................................................6-22 Access Numbers .........................................................................6-23 To enter an access number......................................................6-23
6.7
6.8
Utility Mode Copy Functions

7.1 7.2 Utility Menu Commands ...............................................................7-3 Specifying Machine Settings (MACHINE SETTING Menu).....7-5 To select the MACHINE SETTING menu ................................7-6 To set the AUTO PANEL RESET function...............................7-7 To set the ENERGY SAVE MODE (preheat mode) function ...7-8 To set the AUTO SHUT OFF function......................................7-9 To specify the scanning image quality (DENSITY(ADF) function) ......................................................7-11 To specify the scanning image quality (DENSITY(BOOK) function)...................................................7-12 To specify the printing density (PRINT DENSITY function) ...7-13 To set the LCD CONTRAST function.....................................7-14 To set the LANGUAGE function.............................................7-15 Setting Up the Paper Sources (PAPER SOURCE SETUP Menu) ............................................7-16 To select the PAPER SOURCE SETUP menu ......................7-17 To specify the automatic paper size detection units (INCH/METRIC function)........................................................7-18 To specify the size of paper loaded into the 1st Tray (TRAY1 PAPER function) ......................................................7-19 To set the PAPER TYPE function ..........................................7-22 Specifying User-Managed Service Tasks (USER MANAGEMENT Menu).................................................7-23 To perform the DRUM DEHUMIDIFY function.......................7-24 To perform the TONER REPLENISHER function ..................7-25 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu)..............................................7-26 To select the ADMIN. MANAGEMENT menu ........................7-27 To set the AUTO SHUT OFF function....................................7-28 To turn on/off user (section) management ...............................7-30 To register user (section) access numbers ..............................7-31 To change/delete user (section) access numbers....................7-33 To display/clear the total count for a specific account ..............7-35 v
7.3
7.4
7.5
D1650iD/D2050iD
Contents To clear the total counts for all accounts ................................. 7-37 7.6 Specifying Copy Settings .......................................................... 7-38 COPY SETTING 1 & COPY SETTING 2 menus................. 7-38 To select the COPY SETTING 1 menu ................................. 7-40 To set the PAPER PRIORITY function .................................. 7-41 To set the DENSITY PRIORITY function .............................. 7-42 To set the AUTO density level (DENSITY LEVEL(A) function) .............................................. 7-43 To set the manual density level (DENSITY LEVEL(M) function) ............................................. 7-44 To set the BINDING POS. function ....................................... 7-45 To specify the binding width (MARGIN SETTING function) .. 7-46 To specify the erased width (ERASE SETTING function) ..... 7-47 To set the SMALL ORIGINAL function .................................. 7-48 To select the COPY SETTING 2 menu ................................. 7-49 To set the MIXED ORIGINAL function .................................. 7-50 To set the COPY PRIORITY function .................................... 7-51 To specify the default finishing mode (OUTPUT PRIORITY function) .............................................. 7-52 To set the 4IN1 COPY ORDER function ............................... 7-53 To set the CRISSCROSS MODE function ............................ 7-54 To set the DUPLEX COPY function ...................................... 7-55
Error Messages
8.1 8.2 When the Message TONER EMPTY Appears ......................... 8-2 To replace the toner bottle ......................................................... 8-2 When the Message PAPER JAM Appears .............................. 8-5 To clear a paper misfeed in the Duplex Unit .............................. 8-5 To clear a paper misfeed in the main unit or 1st Tray................ 8-6 To clear a paper misfeed in the Paper Feed Unit .................... 8-10 To clear a paper misfeed in the Multiple Bypass ..................... 8-11 When the Message ORIGINAL DOC.JAM Appears .............. 8-13 To clear a misfeed in the Automatic Document Feeder (AF-12) ..................................................................................... 8-13 To clear a misfeed in the Duplexing Document Feeder (AFR-19) .................................................................................. 8-16 Main Error Messages and Their Remedies .............................. 8-18
8.3
8.4
vi
D1650iD/D2050iD
Contents
Troubleshooting
9.1 9.2 When Incorrect Copies Are Produced ........................................9-2 When Copying Is Not Performed Correctly ................................9-4
10 Appendix
10.1 Specifications..............................................................................10-2 Main Unit D1650iD/D2050iD ....................................................10-2 Duplexing Document Feeder AFR-19 ......................................10-4 Mixed Width Document Sizes (AFR-19)...................................10-4 Automatic Document Feeder AF-12 .........................................10-5 Paper Feed Unit PF-126...........................................................10-5 Shifting Unit OT-103 .................................................................10-5 Job Separator JS-204...............................................................10-6 Multiple Bypass MB-6...............................................................10-6 Care of the Machine ....................................................................10-7 Cleaning ...................................................................................10-7 Housing ....................................................................................10-7 Original Glass ...........................................................................10-7 Document Pad..........................................................................10-7 Control Panel............................................................................10-8 Function Combination Table......................................................10-9 Function Combination Table for D1650iD ................................10-9 Function Combination Table for D2050iD ..............................10-10 Function Combination Codes .................................................10-10 Paper Size and Zoom Ratio Tables .........................................10-11 Copy Paper Sizes...................................................................10-11 Zoom Ratios ...........................................................................10-12
10.2
10.3
10.4
11 Index
11.1 Index.............................................................................................11-2
D1650iD/D2050iD
vii
Contents
viii
D1650iD/D2050iD
Introduction
1
Introduction Chapter 1
1
Chapter 1
1.1 Introduction
1.1
Introduction
We Want You to Be a Satisfied Customer Thank you for choosing this machine.
Introduction
This User Manual describes the functions, operating procedures, precautions, and basic troubleshooting for this machine. Before using the machine, be sure to read the User Manual thoroughly in order to ensure that you use it efficiently. After you have gone through the manual, store it in the holder on the machine and keep it handy at all times. Note that some of the illustrations of the machine used in the User Manual may be different from what you actually see on your machine.
1-2
D1650iD/D2050iD
1.2 Explanation of Manual Conventions
1
Chapter 1
1-3
1.2
Explanation of Manual Conventions
The marks and text formats used in this manual are described below.
WARNING Failure to observe instructions highlighted in this manner may result in fatal or critical injuries. Observe all warnings in order to ensure safe use of the copier.
CAUTION Failure to observe instructions highlighted in this manner may result in serious injuries or property damage. Observe all cautions in order to ensure safe use of the copier.
Note* (*May also appear as Important or Tip) Text highlighted in this manner contains useful information and tips to ensure safe use of the machine.
1 The number 1 as formatted here indicates the

first step of a sequence of actions.
2 Subsequent numbers as formatted here

indicate subsequent steps of a sequence of actions. formatted in this style provides ? Text additional assistance.
An illustration inserted here shows what operations must be performed.
Text formatted in this style describes the action that will ensure the desired results are achieved.
[Copy] key The names of keys on the control panel are written as shown above.
D1650iD/D2050iD
Introduction
1
Chapter 1
1.3 Explanation of Basic Concepts and Symbols
1.3
Explanation of Basic Concepts and Symbols
The use of words and symbols in this manual are explained below. Paper Feeding
Introduction
During printing, paper is supplied from the right side of the machine and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below.
1-4
D1650iD/D2050iD
1.3 Explanation of Basic Concepts and Symbols Width and Length Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as X in the illustration) and the second to the length (shown as Y).
1
Chapter 1
1-5
Paper Orientation Lengthwise ( ) If the width (X) of the paper is shorter than the length (Y), the paper has a vertical or portrait orientation, indicated by either L or .
Crosswise ( ) If the width (X) of the paper is longer than the length (Y), the paper has a horizontal or landscape orientation, indicated by either C or .
D1650iD/D2050iD
Introduction
1
Chapter 1
1.4 Energy Star
1.4
Energy Star
Introduction
As an ENERGY STAR Partner, we have determined that this machine meets the ENERGY STAR Guidelines for energy efficiency. As an ENERGY STAR Partner, we have determined that this machine meets the ENERGY STAR Guidelines for energy efficiency. What is an ENERGY STAR Product? An ENERGY STAR product has a special feature that allows it to automatically switch to a low-power mode after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. 1-6
D1650iD/D2050iD
1.5 Safety Information
1
Chapter 1 Introduction
1.5
Safety Information
This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.
Please read the next section before using this device. It contains important information related to user safety and preventing equipment problems. Make sure you observe all of the precautions listed in this manual. * Ver06 Please note that some parts of the contents of this section may not correspond with the purchased product.
Warning and Precaution Symbols
WARNING: CAUTION:
Meaning of Symbols
Ignoring this warning could cause serious injury or even death.
Ignoring this caution could cause injury or damage to property.
A triangle indicates a danger against which you should take precaution. This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device.
D1650iD/D2050iD
1-7
1
Chapter 1
WARNING
Introduction
Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock. Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock. Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock. Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power outlet for more than the marked current value could result in a fire or electrical shock. Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.
Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. Do not use an extension cord, in principle. Use of an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required. Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. Do not keep using this product, if this product has been dropped or its cover damaged. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a grounding terminal.
1-8
D1650iD/D2050iD
1.5 Safety Information CAUTION
1
Do not use flammable sprays, liquids, or gases near this product, as a fire could result. Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health. Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. Do not install this product at a site that is exposed to direct sunlight, or near an air conditioner or heating apparatus. The resultant temperature changes inside the product could cause a malfunction, fire, or electrical shock. Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result. Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown. After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury. Do not store toner units and PC drum units near a floppy disk or watch that are susceptible to magnetism. They could cause these products to malfunction. The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a CAUTION HOT caution label. Do not place any objects around the power plug as the power plug may be difficult to pull out when an emergency occurs.
The socket-outlet shall be installed near the machine and shall be easily accessible as the power plug may be difficult to pull out when an emergency occurs.
Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals. Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown. When moving this product, always hold it by the locations specified in the User manual or other documents. If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire. When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock.
D1650iD/D2050iD
1-9
1
Chapter 1
Precautions for Routine Use
Do not store toner units, PC drum units, and other supplies and consumables in a place subject to direct sunlight and high temperature and humidity, as poor image quality and malfunction could result. Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight. If the PC drum is exposed to intense light, poor image quality could result. Do not unpack a toner unit or PC drum unit until the very time of use. Do not leave an unpacked unit standing. Install it immediately or poor image quality could result. Do not keep toner units and PC drum units in an upright position or upside down, as poor image quality could result. Do not throw or drop a toner unit or PC drum unit as poor image quality could result. Do not use this product in an area where ammonia or other gases or chemicals are present. Failure to do so may shorten the service life of the product, cause damage or decrease performance. Do not use this product in an environment with a temperature outside the range specified in the User manual, as a breakdown or malfunction could result. Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product, as a malfunction or fire could result. Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result.
Introduction
Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown.
USER INSTRUCTIONS CE Marking (Declaration of Conformity) for Users of the European Union (EU) This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives. This declaration is valid for the area of the European Union. This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under EU directives.
1-10
D1650iD/D2050iD
1.5 Safety Information For users in countries subject to Class B regulations
1
This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules.
For users in countries not subject to Class B regulations

WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules.
D1650iD/D2050iD
1-11
1
Chapter 1
Laser Safety
This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in this manual. Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation. This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous laser radiation. Internal Laser Radiation Maximum Average Radiation Power: 6.32 W at the laser aperture of the print head unit. Wavelength: 770-795 nm This product employs a Class 3b laser diode that emits an invisible laser beam. The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is NOT A FIELD SERVICE ITEM: Therefore, the print head unit should not be opened under any circumstances.
Introduction
Laser Aperture of the Print Head Unit Print Head
1-12
D1650iD/D2050iD
1.5 Safety Information CDRH Regulation
1
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation. The label shown on page 1-15 indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. CAUTION Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the wavelength is 770-795 nm. For European Users CAUTION Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 5mW and the wavelength is 770-795 nm. For Denmark Users ADVARSEL Usynlig laserstrling ved bning, nr sikkerhedsafbrydere er ude af funktion. Undg udsttelse for strling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens hjeste styrke er 5mW og blgelngden er 770-795 nm. For Finland, Sweden Users LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen Kyttminen muulla kuin tss kyttohjeessa mainitulla tavalla saattaa altistaa kyttjn turvallisuusluokan 1 ylittvlle nkymttmlle lasersteilylle.
D1650iD/D2050iD
1-13
1
Chapter 1
Tm on puolijohdelaser. Laserdiodin sunrin teho on 5mW ja aallonpituus on 770795 nm. VARNING! Om apparaten anvnds p annat stt n i denna bruksanvisning specificerats, kan anvndaren utsttas fr osynlig laserstrlning, som verskrider grnsen fr laserklass 1. Det hr r en halvledarlaser. Den maximala effekten fr laserdioden r 5mW och vglngden r 770-795 nm. VARO! Avattaessa ja suojalukitus ohitettaessa olet alttiina nkymttmlle lasersteilylle. l katso steeseen. VARNING! Osynlig laserstrlning nr denna del r ppnad och sprren r urkopplad. Betrakta ej strlen. For Norway Users ADVERSEL Dersom apparatet brukes p annen mte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstrling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og blgelengde er 770-795 nm.
Introduction
1-14
D1650iD/D2050iD
1.5 Safety Information Laser Safety Label A laser safety label is attached to the outside of the machine as shown below.
1
Ozone Release
CAUTION Locate the Machine in a Well Ventilated Room A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room well ventilated.
REMARQUE = Placer lappareil dans une pice largement ventile = Une quantit dozone ngligable est dgage pendant le fonctionnement de lappareil quand celui-ci est utilis normalement. Cependant, une odeur dsagrable peut tre ressentie dans les pices dont laration est insuffisante et lorsque une utilisation prolonge de lappareil est effectue. Pour avoir la certitude de travailler dans un environnement runissant des conditions de confort, sant et de scurit, il est prfrable de bien arer la pice ou se trouve lappareil.
D1650iD/D2050iD
1-15
1
Chapter 1
Acoustic Noise For European Users
Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A).
Introduction
1-16
D1650iD/D2050iD
Precautions
2
Precautions Chapter 2
2
2.1 Installation Precautions
Installation Site
2.1 Installation Precautions
Chapter 2
To ensure utmost safety and prevent possible malfunctions, install the machine in a location that meets the following requirements.
Precautions
A location away from curtains, etc. that may catch fire and burn easily A location that is not exposed to water or other liquids A location free from direct sunlight A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures A well-ventilated location A location that is not exposed to high humidity A location that is not extremely dusty A location not subjected to undue vibrations A stable and level location A location where ammonia or other organic gases are not generated A location that does not put the operator in the direct airflow of exhaust from the machine A location that is not near any kind of heating devices
Power Source The power source requirements are as follows.

G G
Voltage fluctuation: Maximum 10% Frequency fluctuation: Maximum 3 Hz
Use a power source with as little voltage or frequency fluctuations as possible.
2-2
D1650iD/D2050iD
2.1 Installation Precautions Space Requirements
To ensure easy machine operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below.
<D1650iD> 1099 599 1024
*100
<D2050iD> 1099 599 1069 **400 356
*100
1352
252
1100
995
Unit: mm
Note Since there is a ventilation duct on the left side of the machine, be sure to allow a clearance of *100 mm or more on the left side. Allow a clearance of **400 mm or more on the right side of the machine so that the side cover can be opened.
D1650iD/D2050iD
2-3
Precautions
**400 356
Chapter 2
2
2.2 Operation Precautions
Operating Environment
Chapter 2
The environmental requirements for correct operation of the machine are as follows.
G G
Temperature: 10C to 30C with fluctuations of no more than 10C within an hour Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Precautions
Proper Use To ensure the optimum performance of the machine, follow the precautions listed below.
Never place heavy objects on the original glass or subject it to shocks. Never open any machine doors or turn off the machine while it is making copies; otherwise, a paper jam will occur. Never bring any magnetized object or use flammable sprays or liquids near the machine. outlet.
Always make sure that the power plug is completely plugged into the electrical
Always make sure that the machines power plug is visible and not hidden by the machine. for a long period of time.
Always unplug the machine from the electrical outlet if the unit is not to be used Always provide good ventilation when making a large number of continuous
copies.
2-4
D1650iD/D2050iD
CAUTION
CAUTION The area around the fusing unit is extremely hot. Be careful not to touch any parts around the fusing unit, other than those indicated in this manual, in order to reduce the risk of burns. Be especially careful not to touch parts marked with warning labels, and their surrounding areas.
If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice.
Transporting the Machine If you need to transport the machine over a long distance, consult your technical representative. Care of Machine Supplies Use the following precautions when handling the machine supplies (toner cartridge, paper, etc.).
Store the supplies in a location that meets the following requirements.

Free from direct sunlight Away from any heating apparatus Not subjected to high humidity Not extremely dusty
Store in a sealed plastic bag in a cool, dark place paper that has been removed
from its wrapper but not loaded into the machine.
Only use toner that has been manufactured specifically for this machine. Never use other types of toner. Keep all supplies out of the reach of children.
D1650iD/D2050iD
2-5
Precautions
Chapter 2
If the ventilation duct on the left side of the machine is blocked, the inside of the machine will accumulate heat, resulting in a malfunction or fire. Be sure to allow a clearance of 100 mm or more on the left side of the machine for the ventilation duct.
CAUTION
Chapter 2
Precautions for handling toner: Be careful not to spill toner inside the copier or get toner on your clothes or hands.

If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical advice.
Precautions
Storage of Copies
Copies that are to be kept for a long time should be kept where they are not
exposed to light in order to prevent them from fading.
Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
2-6
D1650iD/D2050iD
2.3 Legal Restrictions on Copying
2.3
Legal Restrictions on Copying
Certain types of documents must never be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying. <Financial Instruments>
G G G G G G
Personal checks Travelers checks Money orders Certificates of deposit Bonds or other certificates of indebtedness Stock certificates Food stamps Postage stamps (canceled or uncanceled) Checks or drafts drawn by government agencies Internal revenue stamps (canceled or uncanceled) Passports Immigration papers Motor vehicle licenses and titles House and property titles and deeds Identification cards, badges, or insignias Copyrighted works without permission of the copyright owner
<Legal Documents>
G G G G G G G G
<General>
G G
In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel.
D1650iD/D2050iD
2-7
Precautions
Chapter 2
2
2.4
2.4 Components and Their Functions
Components and Their Functions

2
Chapter 2
1 3
Precautions
No. 1
Part Name Automatic Document Feeder AF-12 (optional) Duplexing Document Feeder AFR-19 (Option for the D2050iD only)
Description Automatically feeds one document sheet at a time for scanning. Also referred to as the Document Feeder throughout the manual. Automatically feeds one document sheet at a time for scanning, and automatically turns over double-sided documents for scanning. Also referred to as the Document Feeder throughout the manual. Presses down on the loaded document to keep it in place. Also referred to as the Original Cover throughout the manual. Allows printed pages to be separated. Automatically turns the pages over, and prints on both sides. Also referred to as the Duplex Unit throughout the manual. Can be loaded with 100 sheets of paper. Equipped with a paper drawer that can supply 250 sheets of paper, for upper paper feed unit only. Also referred to as the Paper Feed Unit throughout the manual.
3 4 5 6 7
Original Cover Kit OC-8 (optional) Job Separator JS-204 (optional) Duplex Unit AD-17 (Option for the D2050iD only) Multiple Bypass MB-6 (optional) Paper Feed Unit PF-126 (optional: D1650iD Up to one, D2050iD Up to four)
2-8
D1650iD/D2050iD
2.4 Components and Their Functions
No. 8
Part Name 32 MB/64 MB Memory M32-5/M64-4 (optional)* Printer Controller Pi2001e (optional)* Internet Fax & Network Scan Kit SU-6 (optional)* Network Interface Card NC-6 (optional)* Shifting Unit OT-103 (optional)*
Description Expanding the memory increases the number of document pages that can be processed by the copier. Also referred to as the expansion memory throughout the manual. An internal printer controller. This allows this machine to be used as a computer printer. For more details, refer to the Printer Controller Manual. An internal Internet Fax & Network Scan Kit. Allows you to use this machine as a network scanner. For more details, refer to the User Manual for the Internet Fax & Network Scan Kit SU-6. By installing the Network Interface Card NC-6 into this machine, network printing from Windows or a NetWare network environment is possible. Shifts copies and printed pages that are fed out. If the Job Separator is installed, the Shifting Unit cannot be attached.
10
11
12
* The internal options are not shown.
D1650iD/D2050iD
2-9
Precautions
Chapter 2
2
2.5
Main Unit
2.5 Part Names and Their Functions
Part Names and Their Functions
Precautions
Chapter 2
6 2 3 5
11 12 13 8 14 9 10
2-10
D1650iD/D2050iD
No. 1 2 3
Part Name Copy Tray Front Cover 1st Tray
Description Collects fed-out copies facing down.
Holds up to 250 sheets of paper. The paper size can be adjusted freely. Can be loaded with special paper. (p. 7-17) Used for manual feeding of paper. The paper is fed one sheet at a time. Can be loaded with special paper. (p. 5-16) Used to open and close the Side Cover. Opened when clearing paper misfeeds. Used to turn the machine on and off. (p. 2-22) Used for connecting a parallel cable from the computer. Used for connecting the network cable when this machine is used for Internet faxing and network scanning. Used for connecting a USB cable from the computer. Used to align the document. (p. 3-11) Presses down on the document positioned on the Original Glass. When manually feeding a document, position it on the Original Glass so that it can be scanned. Position the document face down on the glass. (p. 3-11) Used to start copying or to make various settings. (p. 2-17)
Manual Bypass
5 6 7 8 9 10 11 12 13
Lock Release Lever Side Cover Power Switch Parallel Interface Connector RJ45 Connector for Networking Printer USB Connector Document Scales Original Cover (optional) Original Glass
14
Control Panel
D1650iD/D2050iD
2-11
Precautions
Chapter 2
Opened when replacing the toner bottle. (p. 8-2)
2
Inside of Main Unit
Precautions
Chapter 2
1 3
No. 1
Part Name Imaging Unit
Description Creates the copy image. Replacement of the Imaging Unit must be performed by a service representative. Opened when replacing the toner bottle. Used when clearing paper misfeeds in the fusing unit. (p. 8-5)
2 3
Toner Bottle Holder Pressure Lever
2-12
D1650iD/D2050iD
2.5 Part Names and Their Functions Document Feeder (Optional)
No. 1 2 3 4
Part Name Document Exit Tray Document Guide Plate Document Feeder Cover (Doc. Feed Cover) Document Feeder Tray
Description Collects documents that have been scanned. Adjusted to the width of the document. (p. 3-9) Opened when clearing document misfeeds. (p. 8-13) Holds the documents to be scanned; load documents face up. (p. 3-9)
D1650iD/D2050iD
2-13
Precautions
Chapter 2
2
Multiple Bypass (Optional)
Precautions
Chapter 2
5 6
No. 5 6
Part Name Bypass Tray Bypass Tray Extender
Description Holds up to 100 sheets of plain paper, 20 sheets of special paper, or 10 envelopes. (p. 5-10) Pulled out when large-sized paper is loaded.
2-14
D1650iD/D2050iD
2.5 Part Names and Their Functions Paper Feed Unit (Optional)
7 8 9 10 11
No. 7 8 9 10 11
Part Name 2nd Tray 3rd Tray 4th Tray 5th Tray Side Cover
Description Holds up to 250 sheets of plain paper. With the D2050iD, up to four Paper Feed Units can be installed. With the D1650iD, one Paper Feed Unit can be installed.
Opened when clearing paper misfeeds. (p. 8-10)
D1650iD/D2050iD
2-15
Precautions
Chapter 2
2
Job Separator (Optional)
Chapter 2
With the Job Separator installed
12
Precautions
13
14
No. 12 13 14
Part Name Copy Tray Lamp Upper Copy Tray Lower Copy Tray
Description Lights up when paper is fed into the Upper Copy Tray. Collects computer printouts. Collects copies.
2-16
D1650iD/D2050iD
2.6 Names of Control Panel Parts and Their Functions
2.6
Names of Control Panel Parts and Their Functions
Control Panel Parts and Their Functions
19 18
17 16
15 14
13 12
11
10
No. 1 2
Part Name Error indicator [Printer] key/indicator
Function Flashes when an error has occurred. Refer to Error Messages on page 8-1. Lights up while data is being printed from the computer and flashes while data is being sent. For details, refer to the Printer Controller User Manual. Used to view the counters. Used to enter Utility mode and display the first Utility mode screen. MACHINE SETTING, PAPER SOURCE SETUP, USER MANAGEMENT, ADMIN. MANAGEMENT, COPY SETTING 1 & 2 Displays setting menus, error messages, and specified settings such as the number of copies and the zoom ratio. Erases the entered numbers and letters. Returns to the previous screen. Confirms the current setting. Used to select between the Auto Paper or the Auto Size function. Used to select a preset enlargement or reduction ratio. With each press, a zoom ratio between 0.50 and 2.00 is selected in 0.01 increments. Used to specify the selection above or below in setting screens and menus. Used to select the size of the paper to be printed on.
3 4
[Status] key [Utility] key
5 6 7 8 9
Display [No] key [Yes] key [Auto Paper/Auto Size] key [Zoom] key, and keys
10
[Paper] key
D1650iD/D2050iD
2-17
Precautions
20
Chapter 2
2
No. 11 Part Name [Auto/Photo] key, and [Erase] key [File Margin] key [Finishing] key [X/Y Zoom] key [Neg. Pos.] key keys
Function Used to specify the scanning density of copies. Used to specify the selection at the left or right in setting screens. Used to select the area of the document that is erased. Press to select the File Margin function. Used to select a copy Finishing function. Used to specify different scaling proportions for the vertical and horizontal directions. Press to make copies with the dark- and light-colored areas of the document inverted. Used to select between the 2in1 and the 4in1 copy functions. Copy programs can be stored. Stored copy programs can be selected and recalled. Used to select the Book Separation function. Used to select between the Duplex Orig. function and the Mixed Orig. function.
Chapter 2 Precautions
12 13 14 15 16 17 18 19 20
Copy key [Copy Program] key [Book Separation] key [Original] key
2-18
D1650iD/D2050iD
21
22
23
24 25 26 27
31
30
29
28
No. 21
Part Name Scan key
Function Press to enter Scan mode. The indicator lights up in green to indicate that the machine is in Scan mode. (Available only when the Network Interface Card NC-6 and the Internet Fax & Network Scan Kit SU-6 are installed.) Does not function on this machine. Press to enter Copy mode. The indicator lights up in green to indicate that the machine is in Copy mode. Used with user management. (p. 6-23) Press to enter Energy Save mode. (p. 2-23) Press to enter Interrupt mode. The indicator lights up in green to indicate that the machine is in Interrupt mode. Press again to cancel Interrupt mode and return to the mode before Interrupt mode was entered. (p. 5-38) Does not function on this machine. Cancels all copy functions and returns them to their default settings. Deletes all queued jobs. Stops the multi-page copy operation. Starts copying. Queues a copy job if pressed while the machine is warming up. (p. 2-24) The indicator lights up in green to indicate that the machine is ready to start copying, or it lights up in orange to indicate that the machine is not ready to start copying. Used to specify the number of copies. Used to enter setting values. The [ ] and [#] keys do not function on this machine.
22 23 24 25 26
Fax key Copy key Access key Energy Save key Interrupt key
27 28
[123/ABC] key Panel Reset key
29 30
Stop key Start key
31
10-Key Pad
D1650iD/D2050iD
2-19
Precautions
Chapter 2
2
Display Indications
<Copy mode screen>
Chapter 2
1 2 3
<Utility mode screen>
Precautions
6 7
No. 1 2 3
Display Indication Copy density (document type) Copy density (density level) Paper source
Description Indicates the document type for the copy density setting. PHOTO, TEXT, or TEXT/P Indicates the density level for the copy density setting. Indicates the selected paper tray. If special paper is selected, the paper type is displayed. AUTO, a paper tray and paper size, or paper type Indicates the specified number of copies. Indicates the current zoom ratio setting. AUTO or the current zoom ratio setting is displayed. [X/Y] indicates that the X/Y Zoom function is selected. Displays the current menu, function or settings. Error messages are displayed when errors occur. Displays messages such as operating instructions.
4 5
Number of copies Zoom ratio
6 7
Menu or function name Messages
2-20
D1650iD/D2050iD
2.6 Names of Control Panel Parts and Their Functions Adjusting the Angle of the Display The display can be adjusted to any of three angles. Adjust the display to the angle that allows for easy operation.
Press an edge of the display to adjust it to the desired angle. Middle position
Upper position
Lower position
D1650iD/D2050iD
2-21
Precautions
Chapter 2
2
2.7 Power Supply
To turn on the machine
2.7 Power Supply
Chapter 2 Precautions
Set the Power Switch to I. The indicator on the [Start] key lights up in orange, and the message PLEASE WAIT! appears in the display.
Note If the [Start] key is pressed while the indicator is lit in orange, the copy job is queued. When the indicator on the [Start] key lights up in green, the loaded document is scanned and copies are produced. To turn off the machine
1 Check that all jobs are finished.
If printed pages remain in the Copy Tray, remove them.
2 Set the Power Switch to 2.

Default Settings The settings that are automatically selected when the machine is turned off or the [Panel Reset] key is pressed are called the default settings. These settings serve as a reference for all functions. Copy mode
G G G G G
Number of copies: 1 Copy density: AUTO Zoom ratio: Full size ( 1.00) Paper source: AUTO (with the Document Feeder installed) Finishing function: Non-sort
Tip The default settings can be customized using the functions in the Utility mode (7 Utility Mode Copy Functions).
2-22
D1650iD/D2050iD
2.7 Power Supply Auto Panel Reset
Tip The length of time until the auto panel reset operation is performed can be set to 30 seconds or a setting between 1 and 5 minutes. In addition, the Auto Panel Reset function can be disabled. For details, refer to To set the AUTO PANEL RESET function on page 7-7. Energy Save Mode With the Energy Save mode, the machine automatically enters a standby mode (Energy Save mode), instead of turning off. When the machine is in Energy Save mode, the indicator on the [Start] key remains lit in green, but the display goes off.
Note If the Auto Shut Off function is activated during Energy Save mode, the machine turns off. Conditions for entering Energy Save mode
G G
The [Energy Save] key is pressed. The specified length of time after the last operation has elapsed. (Manufacturers default setting: 15 minutes)
Tip The length of time until the machine enters Energy Save mode can be set between 1 and 240 minutes. (Refer to To set the ENERGY SAVE MODE (preheat mode) function on page 7-8.) Auto Shut Off With the Auto Shut Off function, the machine automatically turns off if no operation is performed for a specified length of time, in order to conserve energy. (Manufacturers default setting: 30 minutes)
D1650iD/D2050iD
2-23
Precautions
Chapter 2
With the auto panel reset operation, the Copy mode screen appears after copying or after a specified length of time has passed after the last operation is finished. (Manufacturers default setting: 1 minute)
2
Queued Copy Jobs
2.7 Power Supply
Copy jobs can be queued by loading the document and pressing the [Start] key while PLEASE WAIT! appears in the display.
Precautions
2-24
Chapter 2
When the indicator on the [Start] key lights up in green, scanning of the loaded document begins, and copies are produced.
D1650iD/D2050iD
Basic Operations
Basic Operations
3
3
Chapter 3
3
3.1 Making Copies
3.1 Making Copies
The following procedure describes how to load a document and make a simple copy of it. To make a simple copy
1 Load the document to be copied.
Refer to Loading the Document on page 3-9.
Basic Operations
Chapter 3
2 Select the desired copy settings.

Paper (p. 5-22) Zoom (p. 5-30) Copy density (p. 5-36) Advanced Copy Operations (p. 6-1)
3 Using the 10-Key Pad, enter the

desired number of copies.

The number of copies can be set to any number between 1 and 99. To clear the entered value, press the [No] key.
3-2
D1650iD/D2050iD
3.1 Making Copies
4 Press the [Start] key.

The set number of copies are made.
To stop copying before the set number of copies have been made, press the [Stop] key.
D1650iD/D2050iD
3-3
Basic Operations
Chapter 3
3
3.2
G
3.2 Loading Paper
Loading Paper
While loading paper, be sure to observe the following precautions. If the paper is curled, flatten it before loading it.
Chapter 3
Basic Operations
Do not load so much paper that the top of the stack is higher than the mark or exceeds the specified number of sheets.
Make sure that the paper guides are pushed up against the edges of the paper.
Tip We recommend replenishing the paper only after all of the paper in the drawer has been used.
3-4
D1650iD/D2050iD
3.2 Loading Paper Loading Paper Into the Paper Tray To load paper into the 1st Tray
1 Pull out the 1st Tray.
Paper Take-up Roller
Have the necessary precautions been observed when pulling out the tray?
2 Press down on the Paper-Lifting Plate

until it locks into place.
Paper-Lifting Plate
3 Load the paper into the tray so that the

front side of the paper (the side facing up when the package was unwrapped) faces up. the necessary precautions ? Have been observed when loading the paper?
Do not load so much paper that the top of the stack is higher than the mark.
D1650iD/D2050iD
3-5
Basic Operations
Chapter 3
Be careful not to touch the surface of the Paper Take-up Roller with your hands.
3
4 Slide the paper guides against the
edges of the paper. the paper guide positioned ? Is correctly?
3.2 Loading Paper
Chapter 3 Basic Operations
5 Close the 1st Tray.
3-6
D1650iD/D2050iD
3.2 Loading Paper To load paper into the 2nd Tray Load paper into the 3rd, 4th and 5th paper trays using the same procedure described below.
1 Pull out the 2nd Tray.
2 Press down on the Paper-Lifting Plate

until it locks into place.
Paper-Lifting Plate
3 Load the paper into the tray so that the

front side of the paper (the side facing up when the package was unwrapped) faces up. the necessary precautions ? Have been observed when loading the paper?
Do not load so much paper that the top of the stack is higher than the mark.
D1650iD/D2050iD
3-7
Basic Operations
Chapter 3
3
3.2 Loading Paper
Chapter 3 Basic Operations
5 Close the 2nd Tray.
3-8
D1650iD/D2050iD
3.3 Loading the Document
3.3
Loading the Document
The document can be loaded into the Document Feeder (optional) or positioned on the Original Glass. Position the document correctly according to the type of document being copied. With the Document Feeder
1 Slide out the Document Guide Plates.

Chapter 3
2 Load the document pages to be

copied face up into the Document Feeder. the necessary precautions ? Have been observed when loading the document?
A maximum of 50 document pages can be loaded. (With AF12) A maximum of 80 document pages can be loaded. (With AFR-19) Do not load so many pages that the top of the stack is higher than the mark.
3 Adjust the Document Guide Plates to

fit the size of the document.
Note Be sure to load the document correctly, otherwise the pages may not be fed in straight.
D1650iD/D2050iD
3-9
Basic Operations
3
4 If necessary, specify any other copy settings.

Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1)
Basic Operations
3-10
Chapter 3
D1650iD/D2050iD
3.3 Loading the Document With the Original Glass To position sheet documents For plain documents or documents that cannot be loaded into the Automatic Document Feeder, position them as described below.
1 Lift open the Original Cover, or the Document Feeder if it is installed. 2 Position the document to be copied
face down on the Original Glass.
Align the document on the scales above and to the left of the Original Glass.
3 Carefully close the Original Cover, or the Automatic Document Feeder if it is

installed.

D1650iD/D2050iD
3-11
Basic Operations
Chapter 3
3
Basic Operations
3-12
Chapter 3
D1650iD/D2050iD
3.3 Loading the Document To position translucent or transparent documents When copying a highly transparent or translucent document, such as OHP transparencies, tracing paper or diazo photosensitive paper, position it as described below.
1 Lift open the Original Cover, or the Document Feeder if it is installed. 2 Position the document to be copied
face down on the Original Glass.
Align the document on the scales above and to the left of the Original Glass.
3 Place a blank sheet of paper of the

same size over the document.
4 Carefully close the Original Cover, or the Document Feeder if it is installed.
D1650iD/D2050iD
3-13
Basic Operations
Chapter 3
3

Basic Operations
3-14
Chapter 3
D1650iD/D2050iD
3.3 Loading the Document To position a book
When copying two facing pages of a bound document, such as a book or magazine, position it as described below.
1 Lift open the Original Cover, or the Document Feeder if it is installed. 2 Position the book face down onto the
Chapter 3
3-15 Original Glass, with the top of the book toward the rear of the machine and with the center of the book aligned with the mark in the Document Scale. the necessary precautions ? Have been observed when positioning the book on the Original Glass?
Do not place objects weighting more than 3 kg on the Original Glass. In addition, do not press down extremely hard on the document, otherwise the machine may be damaged.
3 Carefully close the Original Cover, or the Document Feeder if it is installed. 4 Press the [Book Separation] key.
The Book Separation indicator lights up.

D1650iD/D2050iD
Basic Operations
3
To load documents of mixed sizes
Documents containing pages of different sizes can be loaded as a set into the Document Feeder.
Documents Copies
Chapter 3
(Auto Paper)
Precautions for loading documents of mixed sizes:
Basic Operations
AF-12 Documents of different sizes can be copied only if all pages have the same width. For example: A document consisting of A3 L- and A4 C-size pages. AFR-19 Refer to Mixed Width Document Sizes (AFR-19) on page 5-28.
1 Slide out the Document Guide Plates.
2 Load the document pages to be

copied face up. the necessary precautions ? Have been observed when loading the document?
A maximum of 50 document pages can be loaded. (With AF-12) A maximum of 80 document pages can be loaded. (With AFR-19)
3-16
D1650iD/D2050iD
Do not load so many pages that the top of the stack is higher than the mark.
3 Adjust the Document Guide Plates to

fit the size of the document.
Chapter 3
3-17 Note Be sure to load the document correctly, otherwise the pages may not be fed in straight.
4 Press the [Original] key twice.

Basic Operations
The Mixed Orig. indicator lights up.
5 Press the [Auto Paper/Auto Size] key

until the Auto Paper function is selected.
Check that AUTO appears in the bottom line of the screen.
D1650iD/D2050iD
3
3.4
3.4 Stopping/Restarting/Cancelling a Copy Job
Stopping/Restarting/Cancelling a Copy Job
Follow the procedure described below to stop a copy job.
1 Specify the copy settings, and then press the [Start] key.
Copying begins.
2 During printing, press the [Stop] key.

Chapter 3
The message PLEASE WAIT! appears, and printing is stopped. can the stopped job be ? How restarted?
<Stop>
<Restart>
Basic Operations
When the message PRESS THE START KEY TO RESUME appears, press the [Start] key. Printing continues. <Cancel>
can the stopped job be ? How cancelled?
When the message PRESS THE START KEY TO RESUME appears, press the [No] key. The message COPY CANCELED appears, and the job is cancelled.
3-18
D1650iD/D2050iD
3.5 Confirmation Mode
3.5
Confirmation Mode
The number of operations performed since this machine was installed can be checked using the functions available when the [Status] key is pressed. Items that can be checked from the machine counter menu:
machine counter TOTAL COUNT SIZE COUNT TOTAL SCAN Description This count shows the total number of prints made since this machine was installed. This count shows the total number of prints made for the specified paper size. (The paper size that is counted should be set by the service representative.) This count shows the total number of scans made since this machine was installed. However, the number of pages scanned while making copies is not included.
D1650iD/D2050iD
3-19
Basic Operations
Chapter 3
3
To check the counters
1 Press the [Status] key, and then press

the [Yes] key. The machine counter menu appears.
Basic Operations
Chapter 3
2 Using the
and keys, select the counter that you wish to check.
3-20
D1650iD/D2050iD
3 Press the [Yes] key.

The TOTAL PAGE? appears.
4 Press the [No] key.

The main screen appears.
D1650iD/D2050iD
3-21
Basic Operations
Chapter 3
3
3.6 Reducing Electricity Usage
The Sleep and Auto Power-off modes are extremely useful for conserving energy. The procedure for specifying the Energy Save mode and Auto Shut off is described below.
1 Press the [Utility] key.

Chapter 3
The MACHINE SETTING menu appears.
2 From the 10-Key Pad, press the [2]

key. The ENERGY SAVE MODE function appears.
Basic Operations
3 Using the 10-Key Pad, specify the

length of time the machine is idle before it enters Energy Save mode, and then press the [Yes] key.

The timer can be set between 1 min and 240 min. If you wish to correct the setting, press the [No] key, and then enter the new number.

key. The AUTO SHUT OFF function appears.

length of time the machine is idle before it turns off, and then press the [Yes] key.

3-22
D1650iD/D2050iD
Note If the AUTO SHUT OFF function in the ADMIN.MANAGEMENT menu is set to ENABLE, the screen shown at the right appears. Press the and keys to select ON, and then press the [Yes] key.
D1650iD/D2050iD
3-23
Basic Operations
Chapter 3
Basic Operations
3-24
Chapter 3
D1650iD/D2050iD
Useful Operations
Useful Operations
4
4
Chapter 4
4
4.1 Specifying a Zoom setting
To enlarge/reduce a standard-sized document to a different standard size As an example, the following procedure describes how to enlarge a B5-size document to an A4-size document.
1 Position the document(s) to be copied.
Useful Operations
Chapter 4
2 Press the [Zoom] key.

B5 A4 appears in the display.
Note With each press of the [Zoom] key, the preset zoom ratio that is displayed changes one setting at a time.
3 Check the setting for the size of paper

to be printed on.
If AUTO is displayed, check that A4-sized paper is loaded into the paper tray. If AUTO is not displayed, press the [Paper] key until AUTO is displayed. For details on changing the paper size setting for the paper tray, refer to Setting Up the Paper Sources (PAPER SOURCE SETUP Menu) on page 7-16.
4-2
D1650iD/D2050iD

Note When making copies using the Manual Bypass, continue loading paper into the tray.
D1650iD/D2050iD
4-3
Useful Operations
Chapter 4
4
4.2
4.2 Using the Auto/Photo Function
Using the Auto/Photo Function
To make sharp copies of illustrations or photos Select the appropriate setting (TEXT, PHOTO, or TEXT/P) for the quality of the document to be copied in order to make sharp copies of the document.
Useful Operations
Chapter 4
2 Press the [Auto/Photo] key.
Select either PHOTO or TEXT/ P.
3 Press the
the density.
or
key to adjust
Select the appropriate density for the color and density of the text and paper of the document.
4-4
D1650iD/D2050iD
4.2 Using the Auto/Photo Function
4 Check the setting for the size of paper

to be printed on.
To select either AUTO or a specific paper source, continue pressing the [Paper] key until the desired paper size is displayed.

D1650iD/D2050iD
4-5
Useful Operations
Chapter 4
4
4.3
To copy onto OHP transparencies
4.3 Copying Onto Various Types of Media
Copying Onto Various Types of Media
As an example, the following procedure describes how to make copies onto OHP transparencies loaded into the 1st Tray.
1 Position the A4-sized document.
Useful Operations
Chapter 4
2 Adjust the paper guides in the 1st

Tray, and load the OHP transparencies.
Load OHP transparencies in the same orientation as the document.
Note A maximum of 20 OHP transparencies can be loaded.
3 Press the [Utility] key twice.

The PAPE SOURCE SETUP menu appears.
4-6
D1650iD/D2050iD

key. TRAY1 PAPER appears.
5 Press the
or key to select OHP, and then press the [Yes] key.
6 Press the

8 Press the [Paper] key to select the

paper loaded into the 1st Tray.

D1650iD/D2050iD
4-7
Useful Operations
or key to select AUTO, and then press the [Yes] key.
Chapter 4
4
To copy onto label sheets
As an example, the following procedure describes how to make copies onto 200 mm 250 mm label sheets loaded into the 1st Tray.
Chapter 4
2 Adjust the paper guides in the 1st

Tray, and load the label sheets.
Useful Operations
Load label sheets so that the surface to be printed on faces upward, as shown in the illustration.
3 Press the [Utility] key twice.

The PAPER SOURCE SETUP menu appears.

key. TRAY1 PAPER appears.
4-8
D1650iD/D2050iD
5 Press the
or key to select CARD, and then press the [Yes] key.
6 Press the
7 Using the 10-Key Pad, type in 200

Useful Operations
4-9 for the length (x), and then press the [Yes] key.

The length of the paper (x) can be set between 140 mm and 432 mm. To correct the entered value, press the [No] key.

for the width (y), and then press the [Yes] key.

The width of the paper (y) can be set between 90 mm and 297 mm. To correct the entered value, press the [No] key.

10 Press the [Paper] key to select the

paper loaded into the 1st Tray.
D1650iD/D2050iD
Chapter 4
or key to select SIZE INPUT, and then press the [Yes] key.

Useful Operations
4-10
Chapter 4
D1650iD/D2050iD
4.3 Copying Onto Various Types of Media To copy onto envelopes (non-standard size) As an example, the following procedure describes how to make copies onto 200 mm 150 mm envelopes loaded into the Manual Bypass.
Note When loading non-standard-sized documents and paper, be sure to first measure their size. The Document Scales at the edges of the Original Glass are useful for measuring documents and paper.

Chapter 4
4-11
2 Adjust the paper guides for the

Manual Bypass, and load the envelopes.
Load the envelopes with the flap facing up so that the surface to be printed on faces downward, as shown in the illustration.
Note Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed. With the Manual Bypass, only one envelope can be loaded at a time.
D1650iD/D2050iD
Useful Operations
4
3 Press the [No] key..
4 Press the
or key to select ENVELOPE, and then press the [Yes] key. The PAPER SIZE menu appears.
Chapter 4
ENVELOPE
5 Press the
key.
Useful Operations
The length (x) setting appears.

for the length (X), and then press the [Yes] key.

4-12
D1650iD/D2050iD
Tip Refer to the diagram at the right and be sure to specify the paper width and length measurements correctly.

for the width (y).



D1650iD/D2050iD
4-13
Useful Operations
Chapter 4
4
To copy onto postcards
As an example, the following procedure describes how to make copies onto 148 mm 100 mm postcards loaded into the Manual Bypass.
Chapter 4
2 Adjust the paper guides for the

Manual Bypass, and load the postcards.
Useful Operations
Load postcards with the shorter side as the leading edge, as shown in the illustration.
Note Load postcards so that the surface to be printed on faces downward. With the Manual Bypass, only one postcards can be loaded at a time.

4-14
D1650iD/D2050iD
4 Press the
or key to select ENVELOPE, and then press the [Yes] key. The PAPER SIZE menu appears.
ENVELOPE
5 Press the
key.
The length (x) setting appears.

for the length (x), and then press the [Yes] key.

Tip Refer to the diagram at the right and be sure to specify the paper width and length measurements correctly.
D1650iD/D2050iD
4-15
Useful Operations
Chapter 4
4
for the width (y).


Chapter 4

Useful Operations
4-16
D1650iD/D2050iD
5
Chapter 5
5
5.1 Paper
Use paper that meets the following specifications. Paper Types
Paper Type Weight (g/m2) 60 to 90 g/m2 Paper Source, Etc. Manual Bypass Multiple Bypass 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer 2 2 2 2 2 2 2 2 Plain Paper Special Media 91 to 157 g/m2 2 2 2 Recycled Paper 60 to 90 g/m2 2 2 2 2 2 2 2 2
5.1 Paper
Chapter 5
Double-sided copies
Paper Type
Special Media OHP transparenci es 2 2 2 Postcards Label Sheets Envelopes
Paper Source, Etc. Manual Bypass Multiple Bypass 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer Double-sided copies
2 2 2
2 2 2
2 2 2
2: Available
: Not available
Note The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used.
5-2
D1650iD/D2050iD
5.1 Paper Paper Sizes Non-standard-sized paper

Paper Source Manual Bypass Multiple Bypass 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer Paper Width 90 mm to 297 mm 90 mm to 297 mm 90 mm to 297 mm 182 mm to 297 mm 182 mm to 297 mm 182 mm to 297 mm 182 mm to 297 mm Paper Length 140 mm to 432 mm 140 mm to 432 mm 140 mm to 432 mm 140 mm to 432 mm 140 mm to 432 mm 140 mm to 432 mm 140 mm to 432 mm
Standard-sized paper
Paper Size Paper Source, Etc. A3 L B4 L A4 L A4 C B5 L B5 C A5 L A5 C
Multiple Bypass 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer Double-sided copies
2 2 2 2 2 2 2
2 2 2 2 2 2 2
2 2 2 2 2 2 2
2 2 2 2 2 2 2
2 2 2 2 2 2 2
2 2 2 2 2 2 2
2 2
2 2 2 2 2 2 2
2: Available
: Not available
D1650iD/D2050iD
5-3
Chapter 5
Manual Bypass
5
Paper Capacity
Paper Type Weight Paper Source, Etc. Manual Bypass Multiple Bypass 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer 1 sheet 100 sheets 250 sheets 250 sheets 250 sheets 250 sheets 250 sheets (g/m2) 60 to 90 g/m2 Plain Paper Special Media 91 to 157 g/m2 1 sheet 20 sheets 20 sheets Recycled Paper 60 to 90 g/m2 1 sheet 100 sheets 250 sheets 250 sheets 250 sheets 250 sheets 250 sheets
5.1 Paper
Paper Type
Special Media OHP transparenci es 1 sheet 20 sheets 20 sheets Postcards Label Sheets Envelopes
Chapter 5
Paper Source, Etc. Manual Bypass Multiple Bypass 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer
1 postcard 20 postcards 20 postcards
1 sheet 20 sheets 20 sheets
1 envelope 10 envelopes 10 envelopes
: Not available
5-4
D1650iD/D2050iD
5.1 Paper Unsuitable Paper
The following types of paper should not be used, otherwise decreased print quality, paper misfeeds or damage to the machine may occur.
G G G G G G G G G G G G G G G G G
OHP transparencies that have already been fed through the machine Even if the transparency is still blank, do not reuse it. Paper that has been printed on by a heat-transfer printer or an inkjet printer Paper that is either extremely thick or extremely thin Folded, curled, wrinkled, or torn paper Paper that has been left unwrapped for a long period of time Damp paper Perforated paper or paper with punched holes Extremely smooth or extremely rough paper, or paper with an uneven surface Paper that has been treated, such as carbon-backed, heat-sensitive or pressure-sensitive paper Paper that has been decorated with foil or embossing Paper of various sizes Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper
D1650iD/D2050iD
5-5
Chapter 5
Paper of a non-standard shape (not rectangular)
5
5.2
G G G
5.2 Print Area
Print Area
Any part of the image within the area indicated below is not copied. A margin 4 mm (at full size) from the trailing edge of the paper (A) A margin 4 mm (at full size) from the leading edge of the paper (B) A margin 4 mm (at full size) on both sides of the paper (C)
For details on using the machine to print from a computer when the printer controller is installed, refer to the Printer Controller User Manual.
B C A
Paper output direction
Chapter 5
A: 4 mm (at full size) B: 4 mm (at full size) C: 4 mm (at full size)
5-6
D1650iD/D2050iD
5.3 Paper Storage
5.3
G
Paper Storage
Observe the following precautions when storing the paper. Store the paper in a location that meets the following requirements.
G G
Not exposed to direct sunlight Not exposed to a flame Not exposed to high humidity Not extremely dusty
Unwrapped paper should be placed in a plastic bag and stored in a cool, dark location. Keep paper out of the reach of children.
D1650iD/D2050iD
5-7
Chapter 5
5
5.4
5.4 Making Copies on Manually Fed Paper
Making Copies on Manually Fed Paper
Manually feed the copy paper if you wish to make copies onto paper not loaded into any paper tray, or onto special paper, such as OHP transparencies, postcards or cards. Paper That Can Be Fed Manually Paper types:
G G
Plain or recycled paper (thickness: 60 g/m2 to 90 g/m2) Special paper

Cards (thickness: 91 g/m2 to 157 g/m2) OHP transparencies Postcards Label sheets Envelopes
Paper sizes:
G
Maximum: 297 mm 432 mm Minimum: 90 mm 140 mm
Chapter 5
Note When copying using the Manual Bypass, only one page at a time can be loaded. For details on the number of pages that can be loaded into the Multiple Bypass (optional), refer to Paper Capacity on page 5-4.

5-8
D1650iD/D2050iD
5.4 Making Copies on Manually Fed Paper Adjusting the Multiple Bypass Adjust the Bypass Tray Extender to fit the size of the paper as shown below.
D1650iD/D2050iD
5-9
Chapter 5
5
To load plain paper
Loading Paper Into the Bypass Trays
Load the paper into the Manual Bypass one sheet at a time. Up to 100 sheets of paper can be loaded into the Multiple Bypass. Do not load so much paper into the Multiple Bypass that the top of the stack is higher than the mark.
Note When paper other than plain paper is loaded, the paper type must be specified.
1 Load the paper into the Bypass Tray.
Chapter 5
? Have the necessary precautions been observed when loading the paper?

Load the paper so that the front side of the paper faces down. Make sure that the paper is not curled (rolled).
2 Adjust the Bypass Tray Extender and the paper guides to fit the size of the
paper.
5-10
D1650iD/D2050iD
5.4 Making Copies on Manually Fed Paper Loading Special Paper Into the Bypass Trays To load postcards Load the paper into the Manual Bypass one sheet at a time. Up to 20 sheets of paper can be loaded into the Multiple Bypass.
When loading postcards, load them with the shorter side as the leading edge, as shown in the illustration, and with the side to be printed on facing down.
Note Do not load postcards crosswise. After you have loaded the postcards, use the control panel to specify the paper size and paper type for the Bypass Tray.
D1650iD/D2050iD
5-11
Chapter 5
5
To load envelopes
Load the paper into the Manual Bypass one sheet at a time. Up to 10 sheets of paper can be loaded into the Multiple Bypass.
When loading envelopes, load them with the flap facing up, as shown in the illustration.
Chapter 5
Note Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed, otherwise the envelopes may become wrinkled or a paper misfeed may occur. After you have loaded the envelopes, use the control panel to specify the paper size and paper type for the Bypass Tray.
5-12
D1650iD/D2050iD
Note Do not load envelopes crosswise. Do not load envelopes with the flap facing down. Do not load envelopes with the flap facing backwards.
D1650iD/D2050iD
5-13
Chapter 5
5
To load OHP transparencies
Load the paper into the Manual Bypass one sheet at a time. Up to 20 sheets of paper can be loaded into the Multiple Bypass.
When loading OHP transparencies, load them in the same orientation as the document.
Chapter 5
Note After you have loaded the transparencies, use the control panel to specify the paper size and paper type for the Bypass Tray.
5-14
D1650iD/D2050iD
5.4 Making Copies on Manually Fed Paper To load label sheets Load the paper into the Manual Bypass one sheet at a time. Up to 20 sheets of paper can be loaded into the Multiple Bypass.
When loading label sheets, load them in the same orientation as the document. Place documents with the side to be printed facing down.
Note After you have loaded the label sheets, use the control panel to specify the paper size and paper type for the Bypass Tray.
D1650iD/D2050iD
5-15
Chapter 5
5
Copying Onto Manually Fed Paper To copy using the Manual Bypass
2 Adjust the paper guides to fit the size

of the paper.
3 Insert one sheet of paper with the front

side facing down, lightly sliding the paper as much as possible into the feed slot. The manual bypass mark ( ) appears in the bottom line of the screen. Is a card or a postcard loaded?
?
Chapter 5
Make sure that it is not curled (rolled).

5 Use the
and keys to select the type of paper loaded. Select from the following four paper type settings. PLAIN OHP CARD ENVELOPE

The PAPER SIZE menu appears.
5-16
D1650iD/D2050iD
7 Using the
and keys, select the size of the paper loaded.
If OHP was selected in step 5, select from the following four paper size settings. A4 L A4 C Letter L Letter C If paper with a non-standard size is loaded, press the key, and then use the 10-Key Pad to enter the paper size. (For details, refer to To copy onto label sheets on page 4-8.) Do you know the size of FLS paper? The default FLS size is 210 mm 330 mm. To change the FLS size, contact your service representative.


Zoom (p. 5-30) Copy density (p. 5-36) Advanced Copy Operations (p. 6-1)
D1650iD/D2050iD
5-17
Chapter 5
Tip To copy onto more pages using the same settings, feed paper into the Manual Bypass to begin making copies automatically. To make continuous copies onto cards, postcards, OHP transparencies or envelopes, load them into the 1st Tray. If paper other than plain paper is specified and the Manual Bypass is used, the screen changes as shown below.
Cards
OHP transparencies
Chapter 5
Postcards or envelopes
5-18
D1650iD/D2050iD
5.4 Making Copies on Manually Fed Paper To copy using the Multiple Bypass
2 Adjust the Bypass Tray Extender and

the paper guides to fit the size of the paper.
3 Load the paper with the front side

facing down, lightly sliding the paper as much as possible into the feed slot. The manual bypass mark ( ) appears in the bottom line of the screen. Are sheets of cards or postcards loaded?
4 Check that YES/NO appears in the

bottom line of the screen, and then press the [No] key. The PAPER SOURCE SETUP menu appears.
Note YES/NO is displayed for approximately 5 seconds after paper is loaded into the Multiple Bypass.
5 Use the
and keys to select the type of paper loaded. Select from the following four paper type settings. PLAIN OHP CARD ENVELOPE
D1650iD/D2050iD
5-19
Chapter 5
Make sure that they are not curled (rolled).
5
The PAPER SIZE menu appears.
7 Using the
and keys, select the size of the paper loaded.
Chapter 5
If OHP was selected in step 5, select from the following four paper size settings. A4 L A4 C Letter L Letter C If paper with a non-standard size is loaded, press the key (CUSTOM), and then use the 10Key Pad to enter the paper size. (For details, refer to Copying Onto Various Types of Media on page 4-6.) Do you know the size of FLS paper? The default FLS size is 210 mm 330 mm. To change the FLS size, contact your service representative.


5-20
D1650iD/D2050iD
Tip If paper other than plain paper is specified and the Multiple Bypass is used, the screen changes as shown below.
Cards
OHP transparencies
D1650iD/D2050iD
5-21
Chapter 5
5
5.5
G
5.5 Selecting the Paper Source
Selecting the Paper Source
The paper used for making copies can be selected in two ways. Auto Paper: If the Auto Paper function is selected, the paper tray containing the most suitable size of paper is selected based on the size of the document and the specified zoom ratio. Manual paper selection: The paper that you wish to use for copying can be selected.
To make copies using the Auto Paper function
1 Load the document into the Automatic Document Feeder.

until the Auto Paper function is selected.
Chapter 5
Check that AUTO appears in the bottom line of the screen.

4 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.
Note If APS SIZE ERROR appears in the display immediately after the [Start] key is pressed, no tray is loaded with paper of the most suitable size. Either load paper with the appropriate size, or press the [Paper] key and select the desired paper size, and then press the [Start] key again.
5-22
D1650iD/D2050iD
5.5 Selecting the Paper Source To copy with a manually selected paper size
2 Press the [Paper] key, and then select

the desired paper size.
Check that the correct paper size appears in the bottom line of the screen.

[Start] key.
D1650iD/D2050iD
5-23
Chapter 5
5
To load special paper into the 1st Tray
If special paper, such as OHP transparencies, postcards or cards are loaded into the 1st Tray, first set the TRAY1 PAPER function in the PAPER SOURCE SETUP menu of the Utility mode (To specify the size of paper loaded into the 1st Tray (TRAY1 PAPER function) on page 7-19). Depending on the paper type set for the TRAY1 PAPER function, the screen changes as shown below.
Cards OHP transparencies

5-24
Chapter 5
D1650iD/D2050iD
5.5 Selecting the Paper Source Automatically Selecting the Paper Source With the auto tray switching feature, printing can continue with paper from a different paper drawer if the currently selected drawer runs out of paper during printing.
Note If paper is loaded into the Manual Bypass, the auto tray switching feature does not function. The auto tray switching feature functions if the currently selected paper drawer and another paper drawer (except the Manual Bypass) meet the following conditions.
G G G G
The paper is the same size. The paper is the same type. The paper is positioned in the same orientation. The PAPER TYPE function is set to PLAIN, RECYCLE or 1-SIDE for both paper trays.
Tip If the optional Multiple Bypass and the 5th paper drawer are installed, a maximum of 1350 copies (on A4 C paper) can be made continuously. When making a large number of copies continuously, load all paper drawers (except the Manual Bypass) with paper meeting the conditions listed above. If there is no paper in any paper drawer, a message appears indicating that paper must be replenished. Copying may not continue if paper is loaded into other paper drawers than the one specified in the message.
D1650iD/D2050iD
5-25
Chapter 5
Order for Automatically Switching Paper Drawers When a different paper drawer is automatically selected, the next paper drawer in the following list is chosen. 1st paper drawer 2nd paper drawer 3rd paper drawer 4th paper drawer 5th paper drawer Multiple Bypass
Note If special media, such as OHP transparencies or label sheets, are loaded into the 1st paper drawer or the Multiple Bypass, the auto tray switching feature may cause the paper to be fed incorrectly. In this case, we recommend that the settings be changed as follows. For the 1st paper drawer, change the paper type using the TRAY1 PAPER function on the PAPER SOURCE SETUP menu of the Utility mode (p. 7-19). For the Multiple Bypass, specify the paper type after loading the paper (p. 5-16).

5-26
Chapter 5
D1650iD/D2050iD
5.6 Original Documents
5.6
Original Documents
Using the Document Feeder The document feeder automatically feeds in, scans, then feeds out each page of a multi-page document, one page at a time. The correct type of document must be loaded in order for the document feeder to function properly. Using an incorrect type of document may cause a paper misfeed or damage to the document or machine.
Note In order to copy double-sided documents, the Duplexing Document Feeder AFR-19 (for D2050iD) must be installed. Document Types
Single-sided documents Double-sided documents Documents of mixed sizes
D1650iD/D2050iD
5-27
Chapter 5
5
Documents of Uniform Sizes
Document feed method Document Feeder Document type Sheet documents Single-sided documents AF-12 Capacity: 50 g/m2 to 110 g/m2 AFR-19 Capacity: 35 g/m2 to 128 g/m2 Double-sided documents AFR-19 Capacity: 50 g/m2 to 128 g/m2 Documents of mixed sizes AF-12 Capacity: 60 g/m2 to 90 g/m2 AFR-19 Capacity: 50 g/m2 to 128 g/m2
5.6 Original Documents
Document size AF-12 A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C AFR-19 A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C, B6 L Document width: 90 mm to 297 mm Document length: 210 mm to 432 mm With mixed documents widths AF-12 A3 L and A4 C B4 L and B5 C A4 L and A5 C AFR-19 Refer to the table below. A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C Document width: Up to 297 mm Document length: Up to 432 mm
Original Glass
Chapter 5
Sheet documents, books, and large objects Maximum weight: 3 kg
Mixed Width Document Sizes (AFR-19)

Maximum Document Width Mixed Width Document Detection 297 mm A3 L A4 C 257 mm B4 L B5 C 210 mm A4 L A5 C 182 mm 148 mm B5 L A5 L 297 mm A3 L 2 2 2 2 2 2 A4 C 2 2 2 2 2 2 257 mm B4 L 2 2 2 2 2 B5 C 2 2 2 2 2 210 mm A4 L 2 2 2 A5 C 2 2 2 182 mm B5 L 2 2 148 mm A5 L 2
2: Copying possible : Copying not possible
5-28
D1650iD/D2050iD
5.6 Original Documents Precautions Concerning the Documents The following types of documents should not be loaded into the Duplexing Document Feeder, otherwise paper misfeeds or damage to the document may occur. Instead, these types of documents should be positioned on the original glass. Documents on special paper
G G G G G G G
Folded documents (folded in half or fanned) Highly translucent or transparent documents, such as diazo photosensitive paper Documents with binder holes Documents with many binder holes, such as loose-leaf paper Coated documents, such as heat-sensitive or carbon-backed paper Inkjet printer paper Documents that have just been printed with this machine Curled documents Wrinkled or torn documents Overhead transparencies
Documents on paper that cannot be fed

G G G
If non-standard-sized paper is determined to be close to a standard size, copying with the Auto Paper or Auto Size functions is possible.
Note If a document of a non-standard size is positioned on the Original Glass, the Auto Paper and the Auto Size functions are not available. After loading a document of a non-standard size, press the [Paper] key to select a paper size or press the [Zoom] key to select a zoom ratio.
D1650iD/D2050iD
5-29
Chapter 5
5
5.7 Specifying a Zoom Setting
By specifying a zoom ratio, the copy can be enlarged or reduced. Zoom Settings
Zoom setting Full size AUTO zoom ratio Preset zoom ratios Description Copies are made at the same size as the document ( 1.00). The most appropriate zoom ratio is automatically selected based on the size of the document loaded and the specified paper size. The following common zoom ratios for copying from various standard document sizes to standard paper sizes are available. 0.50 0.70 (A3 A4 and B4 B5) 0.81 (B4 A4 and B5 A5) 1.15 (B4 A3 and B5 A4) 1.41 (A4 A3 and B5 B4) 2.00 Using the and keys, the zoom ratio can be adjusted (increased or reduced) in 0.01 increments. A zoom ratio between 0.50 and 2.00 can be set. Copies can be made using different scaling proportions for the vertical and horizontal directions. Using the and keys, the zoom ratio can be adjusted (increased or reduced) in 0.01 increments. The vertical and horizontal zoom ratios can be set between 0.50 and 1.00.
Zoom ratios selected using the and Zoom keys
Chapter 5 Before Making Copies
X/Y Zoom function
5-30
D1650iD/D2050iD
5.7 Specifying a Zoom Setting To make copies using the AUTO zoom setting

until the Auto Size function is selected.
Check that AUTO appears in the top line of the screen.
3 Press the [Paper] key, and then select

the desired paper size.

Copy density (p. 5-36) Advanced Copy Operations (p. 6-1)
[Start] key.
D1650iD/D2050iD
5-31
Chapter 5
5
To make copies using a fixed zoom setting
2 Press the [Zoom] key, and then select

the desired zoom ratio.
Each press of the [Zoom] key changes the zoom ratio as shown below. 1.15 1.41 2.00 0.50 0.70 0.81 1.00. . .
Chapter 5
Paper (p. 5-22) Copy density (p. 5-36) Advanced Copy Operations (p. 6-1)
[Start] key.

5-32
D1650iD/D2050iD
5.7 Specifying a Zoom Setting To make copies using a specific zoom setting
2 Press the [Zoom] key, and then use

the and keys to specify the desired zoom ratio.
The zoom ratio is set in 0.01 increments.
3 If necessary, specify any other copy

settings.

[Start] key.
D1650iD/D2050iD
5-33
Chapter 5
5
To make copies using the X/Y Zoom function
2 Press the [X/Y Zoom] key until the X/

Y Zoom indicator lights up.
3 Using the
and keys, select the desired zoom ratio for the length (X), and then press the [Yes] key.
Chapter 5
The zoom ratio increases and decreases in 0.01 increments. Press the [Zoom] key, and then select the desired zoom ratio. Each press of the [Zoom] key changes the zoom ratio as shown below. 0.50 0.70 0.81 1.00 0.50 . . .
Width (Y)
Length (X)
Tip Press the [No] key to return to the main screen. To correct the specified zoom ratio, press the [No] key, and then perform the operation again from step 2.
5-34
D1650iD/D2050iD
4 Using the
and keys, select the desired zoom ratio for the width (Y), and then press the [Yes] key.

The zoom ratio increases and decreases in 0.01 increments. Press the [Zoom] key, and then select the desired zoom ratio. Each press of the [Zoom] key changes the zoom ratio as shown below. 0.50 0.70 0.81 1.00 0.50 . . .
Tip Press the [No] key to return to the main screen. To correct the specified zoom ratio, press the [No] key, and then perform the operation again from step 2.
5 If necessary, specify any other copy

settings.

[Start] key.
D1650iD/D2050iD
5-35
Chapter 5
5
5.8
5.8 Specifying the Copy Density (Auto/Photo Function)
Specifying the Copy Density (Auto/Photo Function)
Document type and copy density settings

G
TEXT setting: Select the TEXT setting when copying text documents. Select this setting to emphasize contours and reproduce text documents with sharpness. The automatic density level and 9 manual density levels are available.
[A] (automatic) density level: The density level is automatically adjusted according to the document being copied. Manual density levels: Select a level between the lightest and darkest settings, depending on the document to be copied.
PHOTO setting: Select this setting when copying documents containing many areas with halftones (intermediate colors), such as photographs. The [A] (automatic) density level cannot be selected if the PHOTO setting is selected. TEXT/P setting: Select the TEXT/P setting when copying documents containing both text and photos. The automatic density level and 9 manual density levels are available.
Chapter 5
[A] (automatic) density level: The density level is automatically adjusted according to the document being copied. Manual density levels: In order to prevent the image on the back of newspaper or magazine articles from appearing in the copy, press the key to select a lighter density level. In order to reproduce pale colors in bright areas of the image, press the key to select a darker density level.
Note Selecting a density level that is too dark may cause the media color of the document to be reproduced, and selecting a level that is too light may produce a very faint copy. Therefore, select the appropriate level depending on the document.
5-36
D1650iD/D2050iD
5.8 Specifying the Copy Density (Auto/Photo Function) To make copies after specifying a copy density
2 Press the [Auto/Photo] key to select

between the TEXT/P[A] (AUTO), TEXT[A] (AUTO), PHOTO, TEXT/P, or TEXT settings.
The current setting appears on the left side of the screen.
3 If the PHOTO, TEXT or TEXT/P

setting was selected, use the and keys to adjust the density level.
<When making copies with a light density level>
<When making copies with a darker density level>

Paper (p. 5-22) Zoom (p. 5-30) Advanced Copy Operations (p. 6-1)
[Start] key.
D1650iD/D2050iD
5-37
Chapter 5
5
5.9 Interrupting Copy Jobs
Long continuous copy operations can quickly be paused by pressing the [Interrupt] key in order to copy a different document.
Note Some functions cannot be interrupted. In addition, some functions are not available while a copy job is interrupted. For details, refer to Function Combination Table on page 10-9. To interrupt a copy job
1 Press the [Interrupt] key. The Interrupt

indicator lights up, and the current copy operation is paused.
Chapter 5
When the [Interrupt] key is pressed, all functions are reset to their defaults.
2 Remove the current document, and then load the other document that you wish
to copy.

Paper (p. 5-22) Zoom (p. 5-30) Copy density (p. 5-36) Advanced Copy Operations (p. 6-1)
[Start] key to copy the other document.
5-38
D1650iD/D2050iD
5 After the other document is copied, press the [Interrupt] key.

The Interrupt indicator goes off, and all copy functions return to their previous settings.
6 Reload the document that was removed in step 2. 7 Press the [Start] key.
The interrupted copy job continues.
D1650iD/D2050iD
5-39
Chapter 5

5-40
Chapter 5
D1650iD/D2050iD
6
Chapter 6
6
6.1 Single-Sided Copies
To make copies using the 2in1 (or 4in1) copy function

Documents 2in1Copy Documents 4in1Copy
Note The optional Document Feeder must be installed.
1 Load the document to be copied into

the Document Feeder.
Chapter 6
2 Press the [Copy] key.

The 2in1 (or 4in1) indicator lights up.
6-2
D1650iD/D2050iD

[Start] key.
? Do you know the copy order for the 4in1 copy function?
The copy order can be set to one of the two shown at the right. For details on changing the copy order, refer to To set the 4IN1 COPY ORDER function on page 7-53. The manufacturers default setting is PATTERN1.
PATTERN1
PATTERN2
1 2 3 4
1 3 2 4
D1650iD/D2050iD
6-3
Chapter 6
To make copies using the Book Separation function
2 Press the [Book Separation] key.

The Book Separation indicator lights up.
3 To erase around the text or along the

binding, press the [Erase] key.
Chapter 6
To begin copying, continue with step 5. Do you know how large an area is erased? The width of the erased area for the FRAME setting can be set between 5 mm and 20 mm, in 1 mm increments. The manufacturers default setting is 10 mm. The width of the erased area for the CENTER setting is fixed at 10 mm. The width of the erased area for the FRAME setting can be changed using the ERASE SETTING function in the Utility mode (To specify the erased width (ERASE SETTING function) on page 7-47).

6-4
D1650iD/D2050iD

[Start] key.
The default binding setting is for left-bound books. To copy right-bound books, change the document type using the BINDING POS. function in the Utility mode (To set the BINDING POS. function on page 7-45).
There are three Erase settings available.

Erase setting FRAME Erase setting Explanation The pages are copied with a blank area framing the text. Finishing
Documents
Copies
CENTER Erase setting
The pages are copied with a blank area along the binding.
Documents
Copies
BOTH Erase setting
The pages are copied with blank areas framing the text and along the binding.
Documents
Copies
D1650iD/D2050iD
6-5
Chapter 6
6
6.2 Double-Sided Copies
Double-sided copies in addition to 2in1 and 4in1 double-sided copies can be made from single-sided or double-sided documents.
Note The optional Duplex Unit must be installed. (D2050iD only) The type of double-sided copy that can be made depends on the options that are installed. When making 2in1 and 4in1 copies, use the Document Feeder. When copying double-sided documents, use the Duplexing Document Feeder. Types of double-sided copying
Double-sided copy methods Indicator Original Cover Kit OC-8 2 Automatic Document Feeder AF12 2 Duplexing Document Feeder AFR19 2
Single-sided documents Double-sided copy

2 1 1
Chapter 6
1
1
Double-sided document Double-sided copy

1 1
Single-sided documents 2in1 double-sided copy

4 3 2 1 1 2
1
1
6-6
D1650iD/D2050iD
6
Indicator Original Cover Kit OC-8 Automatic Document Feeder AF12 2 Duplexing Document Feeder AFR19 2
Double-sided copy methods
Single-sided documents 4in1 double-sided copy

8 1 2
1 3
2 4
1
3
7 4
Double-sided documents 2in1 double-sided copy

7 5 3 1 1 1 1 2 2 5 2 7 2 6
1
1
Double-sided documents 4in1 double-sided copy

15 9 1 1 1 3 3 3 4 2 2 3 4 15 4 2 2 2 12 10
Double-sided copying is not possible under the following conditions:

G G G G G
Double-sided documents are loaded into the Automatic Document Feeder AF12. The Manual Bypass is selected. Special paper (cards, OHP transparencies, envelopes, or label sheets) is loaded. The PAPER TYPE function is set to 1-SIDE. Paper with a width less than 140 mm is selected.
D1650iD/D2050iD
6-7
Chapter 6
6
1 Position the document(s) to be
copied. Refer to Loading the Document on page 3-9.
To make double-sided copies using the Original Glass
For details on loading the documents into the Document Feeder, refer to To make doublesided copies using the Document Feeder on page 6-9.

The Duplex indicator lights up.
Chapter 6
3 If necessary, specify any other copy setting.

4 Using the 10-Key Pad, enter the desired number of copies.

5 Position the first document page, and

then press the [Start] key. After the document page is scanned, the message NEXT PAGE SCAN=START appears.
6 Position the second document page, and then press the [Start] key.
After the document page is scanned, a double-sided copy is printed.
6-8
D1650iD/D2050iD
6.2 Double-Sided Copies To make double-sided copies using the Document Feeder
1 Position the document(s) to be

copied. Refer to Loading the Document on page 3-9.

The desired double-sided copy function is selected.
3 If necessary, specify any other copy setting.

6-9 [Start] key.
D1650iD/D2050iD
Chapter 6
6
6.3
6.3 Finishing Copies (Sort and Group functions)
Finishing Copies (Sort and Group functions)
When copying or printing two or more sets of a document, the copies can be divided either by sets containing a copy of each page (sorted) or by pages (grouped).
Note If the Automatic Document Feeder is not installed, the Sort and Group Finishing functions can only be used if the Book Separation function is selected. Finishing functions
G
Non-sort function: The copies are stacked on top of each other as they are fed out.
Documents
Copies
Sort function: The copies are automatically divided into sets with each set containing a copy of each page.
Documents
Copies

6-10
Chapter 6
D1650iD/D2050iD

G
6
Copies
Group function: The copies are automatically divided into stacks containing all copies of the same page.
Documents
D1650iD/D2050iD
6-11
Chapter 6
6
Conditions for sorting
G G
Notes on Using the Sort and Group Functions The number of copies is set to 2 or more. The Book Separation function is selected if the Document Feeder is not installed. A4 or B5 paper is used. Paper of the same size and type is loaded horizontally in one paper drawer and vertically in another drawer. The Auto Paper function is selected. The Mixed Orig. function must not be selected. The Document Feeder is installed. The CRISSCROSS MODE function in the Utility mode is set to ON. (p. 7-54) The optional Shifting Unit is not installed.
Conditions for crisscross sorting

G G G G G G G
Shift Sorting Each copy set is fed out shifted to alternating side.
Chapter 6
Note The optional Shifting Unit must be installed.
Crisscross Sorting Each copy set is fed out in an alternating crisscross pattern.
6-12
D1650iD/D2050iD
6.3 Finishing Copies (Sort and Group functions) Shift Grouping Each page set is fed out shifted to alternating sides.
Note The optional Shifting Unit must be installed.
Crisscross Grouping Each page set is fed out in an alternating crisscross pattern.
D1650iD/D2050iD
6-13
Chapter 6
6
Specifying Finishing
To make copies using a Finishing function
1 Load the document to be copied into

the Document Feeder.
2 Press the [Finishing] key.

The indicator for the desired Finishing function lights up. Are neither the Sort nor the Group indicators lit?
The Non-sort function is selected.
Chapter 6

[Start] key.
6-14
D1650iD/D2050iD
6.4 Erasing Sections of Copies
6.4
Erasing Sections of Copies
Areas such as the unclean-looking frames around copies can be erased. Precautions on the Erased Margin Location The location of the erased area in the copy depends on how the document is positioned.
Erase setting LEFT Original Glass Document Feeder
UPPER
FRAME
D1650iD/D2050iD
6-15
Chapter 6
6
To make copies using an Erase setting
6.4 Erasing Sections of Copies
2 Press the [Erase] key.

The Erase indicator lights up.
3 Using the
and keys, select LEFT, UPPER or FRAME to specify the area that will be erased. you know how large an area is ? Do erased?
The width of the erased area for the LEFT, UPPER and FRAME settings can be set between 5 mm and 20 mm, in 1 mm increments. The manufacturers default setting is 10 mm. The width of the erased area for the LEFT, UPPER and FRAME settings can be changed using the ERASE SETTING function in the Utility mode (To specify the erased width (ERASE SETTING function) on page 7-47).
Chapter 6


[Start] key.
6-16
D1650iD/D2050iD
6.5 Negative/Positive Inverted Copying
6.5
Negative/Positive Inverted Copying
Copies can be made with the light-colored areas of the document (media) and the dark-colored areas of the document (text) inverted.
Documents
Copies
To make copies using the negative/positive inverted copy function
Refer to Loading the Document on page 3-9. Pos.] key.
2 Press the [Neg.

The Neg.
Pos. indicator lights up.

[Start] key.
D1650iD/D2050iD
6-17
Chapter 6
6
6.6
6.6 Making Copies for Filing (File Margin function)
Making Copies for Filing (File Margin function)
So that copies can easily be stored in filing binders, copies can be made with a file margin. Left-side binding: Copies are printed with the contents of the document slightly shifted to the right in order to create a binding margin at the left.
Documents Copies
Precautions on the Binding Margin Location The location of the binding margin area in the copy depends on how the document is positioned.
Original Glass Document Feeder

6-18
Chapter 6
D1650iD/D2050iD
6.6 Making Copies for Filing (File Margin function) To make copies using the File Margin function
2 Press the [File Margin] key.

The File Margin indicator lights up. Do you know how large a binding margin is created?
The width for the binding can be set between 0 mm and 20 mm, in 1 mm increments. The manufacturers default setting is 10 mm. The width of the binding margin can be changed using the MARGIN SETTING function in the Utility mode (To set the BINDING POS. function on page 7-45).

[Start] key.
D1650iD/D2050iD
6-19
Chapter 6
6
6.7 Programmed Copy Jobs
Store up to two of the more frequently used copy setting programs for immediate recall when necessary.
Note Copy programs cannot be stored while the machine is warming up or while a copy job is paused (Interrupt mode). To store a copy program
1 Select the copy settings to be stored as the copy program.

2 Press the [Copy Program] key.
Chapter 6
3 Using the
and keys, select REGIST., and then press the [Yes] key.
4 Using the
and keys, select the program number where you wish to store the copy program, and then press the [Yes] key.
6-20
D1650iD/D2050iD
Note If two copy programs have already been stored, the copy settings previously stored under the selected program number are deleted and replaced with the new ones.
D1650iD/D2050iD
6-21
Chapter 6
6
To recall a copy program
2 Press the [Copy Program] key.
3 Using the
and keys, select RECALL, and then press the [Yes] key.
Chapter 6
4 Using the
and keys, select the program number of the copy program that you wish to recall, and then press the [Yes] key.
6-22
D1650iD/D2050iD
6.8 Access Numbers
6.8
Access Numbers
If access number have been specified, use of the machine can be limited to a specific user and the number of copies for each user can be controlled. As an example, the following procedure describes how to enter the access number in order to make copies.
Note If access numbers have been specified, the machine cannot be used unless the access number is entered first. In order to use this function, the access numbers must be specified with the COPY TRACK function from the ADMIN. MANAGEMENT menu (To turn on/ off user (section) management on page 7-30). To enter an access number
1 Using the 10-Key Pad, enter the 3digit account (section) access number.
2 Press the [Access] key.

The Copy mode screen appears and copying can be started.
3 Position the document(s) to be copied, and then select the desired copy
settings.

4 Press the [Start] key. 5 When you are finished making copies, press the [Access] key.
D1650iD/D2050iD
6-23
Chapter 6
If you wish to correct the entered access number, press the [No] key, and then enter the correct number.
6.8 Access Numbers

6-24
Chapter 6
D1650iD/D2050iD

7
7
Utility Mode Copy Functions Chapter 7
7
Chapter 7
This chapter describes the various Utility mode functions that can be used to set copy-related functions.
Note Depending on the options installed, some functions may not be available. If an unavailable functions is selected, an error message appears.

7-2
D1650iD/D2050iD
7.1 Utility Menu Commands
7
Chapter 7
ON (0.5/1/2/3/4/5, Default: 1)/OFF TIMER=1-240 min. (Default: 15) ON (TIMER=15-240 min.)/OFF MODE1/MODE2 MODE1/MODE2 LIGHT to DARK (5 levels) LIGHT to DARK (4 levels) Default: ENGLISH (For each paper tray) INCH/METRIC PLAIN/OHP/CARD/ENVELOPE AUTO/CUSTOM PLAIN/RECYCLE/SPECIAL/1-SIDE* DISABLE/ENABLE COPY TRACK MODE (ON/OFF) ACCESS NO. REG. COPY TRACK DATA (DISPLAY/ CLEAR) 1ST/2ND/3RD**/4TH**/5TH**/ MULTI BYPASS TEXT/PHOTO/TEXT/P LIGHT to DARK (3 levels) LIGHT to DARK (9 levels) LEFT/RIGHT WIDTH=0-20 (mm) (Default:10) LEFT/UPPER/FRAME (WIDTH=5 -20 (mm)) (Default:10) DISABLE/ENABLE
7.1
Utility Menu Commands
Manufacturers default settings appear in bold.

Menu 1 MACHINE SETTING Function AUTO PANEL RESET ENERGY SAVE MODE AUTO SHUT OFF DENSITY (ADF) DENSITY (BOOK) PRINT DENSITY LCD CONTRAST LANGUAGE 2 PAPER SOURCE INCH/METRIC TRAY1 PAPER PAPER TYPE 3 USER MANAGEMENT DRUM DEHUMIDIFY TONER REPLENISHER 4 ADMIN. MANAGEMENT AUTO SHUT OFF COPY TRACK Settings
5 COPY SETTING 1
PAPER PRIORITY DENSITY PRIORITY DENSITY LEVEL(A) DENSITY LEVEL(M) BINDING POS. MARGIN SETTING ERASE SETTING SMALL ORIGINAL
D1650iD/D2050iD
7-3
7
Chapter 7
Menu 6 COPY SETTING 2 Function MIXED ORIGINAL COPY PRIORITY OUTPUT PRIORITY
7.1 Utility Menu Commands
Settings ON/OFF AP/AS/MANUAL NON/SORT/GROUP PATTERN1/PATTERN2 ON/OFF ON/OFF
4IN1 COPY ORDER CRISSCROSS MODE DUPLEX COPY
* 1-SIDE is displayed only when the machine is equipped with the duplex unit. ** Only with D2050iD
7-4
D1650iD/D2050iD
7.2 Specifying Machine Settings ( MACHINE SETTING Menu)
7
Chapter 7
7-5
7.2
Specifying Machine Settings (MACHINE SETTING Menu)
From the MACHINE SETTING menu, the following machine settings can be changed. MACHINE SETTING menu:
No. 1 MACHINE SETTING AUTO PANEL RESET Description This function can be used to set the length of time until the auto panel reset operation is performed after copying or the last operation is finished. When the auto panel reset operation is performed, the main screen is automatically displayed. The manufacturers default setting is 1 min. This function can be used to set the length of time that the machine is idle before it enters Energy Saver mode. The manufacturers default setting is 15 min. This function can be used to set the length of time until the machine automatically turns off after the last operation is finished. The manufacturers default setting is OFF . This function is used to specify the density level when the optional Document Feeder is used. Mode 1: For printing lighter copies of dark documents to avoid darkening of copies. Mode 2: For printing copies with same density as documents. The manufacturers default setting is MODE1 . This function is used to specify the density level when a document is placed on the Original Glass and copied. Mode 1: For printing copies with same density as documents. Mode 2: For printing lighter copies of dark documents to avoid darkening of copies. The manufacturers default setting is MODE1 . The print density can be set to one of five settings. The manufacturers default setting is . This function can be used to adjust the contrast of the Control Panel display. The manufacturers default setting is . This function can be used to set the language of the display and the printed reports.
ENERGY SAVE MODE
AUTO SHUT OFF
DENSITY (ADF)
DENSITY (BOOK)
6 7
PRINT DENSITY LCD CONTRAST
LANGUAGE
D1650iD/D2050iD
7
Chapter 7
7.2 Specifying Machine Settings (MACHINE SETTING Menu)
To select the MACHINE SETTING menu

MACHINE SETTING? appears.
2 From the 10-Key Pad, press the key for the MACHINE SETTING function that
you wish to set.
The MACHINE SETTING functions are as follows: 1 AUTO PANEL RESET 2 ENERGY SAVE MODE 3 AUTO SHUT OFF 4 DENSITY (ADF) 5 DENSITY (BOOK) 6 PRINT DENSITY 7 LCD CONTRAST 8 LANGUAGE
Tip If, at any time, you wish to quit setting a MACHINE SETTING function, press the [No] key. When the message STOP SETTING? appears, press the [Yes] key to quit.
7-6
D1650iD/D2050iD
7.2 Specifying Machine Settings (MACHINE SETTING Menu) To set the AUTO PANEL RESET function
7
Chapter 7
7-7
1 Select the MACHINE SETTING

menu.
2 Press the [1] key from the 10-Key Pad

to select AUTO PANEL RESET.
3 Using the
and keys, select either ON or OFF, and then press the [Yes] key.
If OFF was selected, the MACHINE SETTING menu appears again.
4 Using the
and keys, select 0.5, 1, 2, 3, 4 or 5, and then press the [Yes] key.
The MACHINE SETTING menu appears again.
D1650iD/D2050iD
Refer to To select the MACHINE SETTING menu on page 7-6.
7
Chapter 7
To set the ENERGY SAVE MODE (preheat mode) function

menu.

to select ENERGY SAVE MODE.

length of time the machine is idle before it enters Energy Save mode, and then press the [Yes] key.

7-8
D1650iD/D2050iD
7.2 Specifying Machine Settings (MACHINE SETTING Menu) To set the AUTO SHUT OFF function Precautions for setting the AUTO SHUT OFF function:
7
Chapter 7 Utility Mode Copy Functions
7-9
Whether or not auto shut-off is possible depends on the AUTO SHUT OFF function in the ADMIN. MANAGEMENT menu.

menu.

to select AUTO SHUT OFF.
If the AUTO SHUT OFF function in the ADMIN. MANAGEMENT menu is set to DISABLE, skip to step 4.
3 Using the
and keys, select ON, and then press the [Yes] key.

length of time until the machine automatically turns off, and then press the [Yes] key.

D1650iD/D2050iD
7
Chapter 7
Note If the Auto Shut Off function is performed and the machine is turned off, it will no longer be possible to make copies or print from a computer. To make copies or print from a computer, turn on the machine.
7-10
D1650iD/D2050iD
7.2 Specifying Machine Settings (MACHINE SETTING Menu) To specify the scanning image quality (DENSITY(ADF) function)
7
Chapter 7
7-11

menu.

to select DENSITY(ADF).
Note If the Document Feeder is not installed, NOT AVAILABLE appears.
3 Using the
and keys, select either MODE1 or MODE2, and then press the [Yes] key.
D1650iD/D2050iD
7
Chapter 7
To specify the scanning image quality (DENSITY(BOOK) function)

menu.

to select DENSITY(BOOK).
3 Using the
and keys, select either MODE1 or MODE2, and then press the [Yes] key.
7-12
D1650iD/D2050iD
7.2 Specifying Machine Settings (MACHINE SETTING Menu) To specify the printing density (PRINT DENSITY function)
7
Chapter 7
7-13

menu.

to select PRINT DENSITY.
3 Using the
and keys, select one of the five settings between LIGHT and DARK, and then press the [Yes] key.
D1650iD/D2050iD
7
Chapter 7
To set the LCD CONTRAST function

menu.
Refer toTo select the MACHINE SETTING menu on page 7-6.

to select LCD CONTRAST.
3 Using the
and keys, select one of the four settings between LIGHT and DARK, and then press the [Yes] key.
7-14
D1650iD/D2050iD
7.2 Specifying Machine Settings (MACHINE SETTING Menu) To set the LANGUAGE function
7
Chapter 7
7-15

menu.

to select LANGUAGE.
3 Using the
and keys, select the desired language, and then press the [Yes] key.
D1650iD/D2050iD
7
Chapter 7
7.3 Setting Up the Paper Sources (PAPER SOURCE SETUP Menu)
7.3
Setting Up the Paper Sources (PAPER SOURCE SETUP Menu)
From the PAPER SOURCE SETUP menu, the various settings for the paper trays can be changed. PAPER SOURCE SETUP menu:
No. 1 PAPER SOURCE SETUP INCH/METRIC Description This function can be used to set the size measurement system for the paper loaded in each tray. It can be used to select whether paper measured in centimeters (METRIC), such as A4 and B5 sizes, or paper measured in inches (INCH), such as Letter size, is loaded. If no particular setting is selected, the paper size is detected automatically. The manufacturers default setting is METRIC. This function can be used to set the type of paper (PLAIN, OHP, CARD or ENVELOPE) loaded into the 1st Tray, and the size of the paper (AUTO or SIZE INPUT). If the paper size is set to SIZE INPUT, type in the paper size. The manufacturers default settings are PLAIN and AUTO. This function can be used to specify the type of paper loaded into a tray, which determines whether or not the paper is available with the Auto Paper function or the tray is available with the auto tray switching feature. Select the paper type (PLAIN, RECYCLE or SPECIAL) to specify whether the paper is available with the Auto Paper function or the tray is available with the auto tray switching feature. If special paper is loaded into the tray, PLAIN, RECYCLE, SPECIAL or 1-SIDE must be selected. PLAIN:The Auto Paper function can be selected, the auto tray switching feature is available, and double-sided copies can be made. RECYCLE:The Auto Paper function cannot be selected; however, the auto tray switching feature is available, and double-sided copies can be made. SPECIAL:The Auto Paper function cannot be selected, and the auto tray switching feature is not available; however, double-sided copies can be made. 1-SIDE:The Auto Paper function can be selected and the auto tray switching feature is available only when making singlesided copies. In addition, double-sided copies can be made. The manufacturers default setting is PLAIN.
TRAY1 PAPER
PAPER TYPE
7-16
D1650iD/D2050iD
7.3 Setting Up the Paper Sources (PAPER SOURCE SETUP Menu) To select the PAPER SOURCE SETUP menu
7
Chapter 7
7-17

2 Press the
key once to select PAPER SOURCE SETUP?.
3 From the 10-Key Pad, press the key for the PAPER SOURCE SETUP function
that you wish to set.
The PAPER SOURCE SETUP functions are as follows: 1 INCH/METRIC 2 TRAY1 PAPER 3 PAPER TYPE
Tip If, at any time, you wish to quit setting a PAPER SOURCE SETUP function, press the [No] key. When the message STOP SETTING? appears, press the [Yes] key to quit.
D1650iD/D2050iD
7
Chapter 7
To specify the automatic paper size detection units (INCH/METRIC function)
1 Select the PAPER SOURCE SETUP

menu.
Refer to To select the PAPER SOURCE SETUP menu on page 7-17.

to select INCH/METRIC.
3 Using the
and keys, select a paper tray, and then press the [Yes] key.
4 Using the
and keys, select either METRIC or INCH, and then press the [Yes] key.
The PAPER SOURCE SETUP menu appears again.
7-18
D1650iD/D2050iD
7.3 Setting Up the Paper Sources (PAPER SOURCE SETUP Menu) To specify the size of paper loaded into the 1st Tray (TRAY1 PAPER function)
7
Chapter 7
7-19

menu.

to select TRAY1 PAPER.
3 Using the
and keys, select PLAIN, OHP, CARD or ENVELOPE, and then press the [Yes] key.
4 Using the
and keys, select either AUTO or SIZE INPUT, and then press the [Yes] key.
If AUTO was selected, the PAPER SOURCE SETUP menu appears again. If SIZE INPUT was selected, a screen appears, allowing you to specify the paper size.
5 Using the 10-Key Pad, enter the paper

length (mm), and then press the [Yes] key.

The paper length can be set between 140 mm and 432 mm. If you wish to correct the setting, press the [No] key, and then enter the new number.
D1650iD/D2050iD
7
Chapter 7
Note The paper length is set between 421 mm and 432 mm, the maximum width that can be set is 279 mm. The paper width is set between 280 mm and 297 mm, the maximum length that can be set is 420 mm.
421 mm to 432 mm Less than 297 mm (Length)
(Width) Less than 420 mm (Length) (Width)
the necessary precautions been observed when entering the paper ? Have size?
Refer to the diagram at the right and be sure to specify the paper width and length measurements correctly.
280 mm to 297mm
6 Using the 10-Key Pad, enter the paper

width (mm).

The paper width can be set between 90 mm and 297 mm. If you wish to correct the setting, press the [No] key, and then enter the new number.
7-20
D1650iD/D2050iD
7
Chapter 7
7-21

D1650iD/D2050iD
7
Chapter 7
To set the PAPER TYPE function

menu.

to select PAPER TYPE.
3 Using the
and keys, select a paper tray, and then press the [Yes] key.
4 Using the
and keys, select either PLAIN, RECYCLE or SPECIAL, 1-SIDE and then press the [Yes] key.
Note 1-SIDE is displayed only when the machine is equipped with the Duplex Unit (option for the D2050iD only). 7-22 D1650iD/D2050iD
7.4 Specifying User-Managed Service Tasks (USER MANAGEMENT Menu)
7
Chapter 7 Utility Mode Copy Functions
7.4
Specifying User-Managed Service Tasks (USER MANAGEMENT Menu)
From the USER MANAGEMENT menu, certain service operations can be performed in order to maintain the machines efficiency. USER MANAGEMENT menu:
No. 1 USER MANAGEMENT DRUM DEHUMIDIFY Description When the room temperature changes drastically (such as when a heater is used in the winter) or when the machine is used in an extremely humid location, condensation may form on the surface of the PC drum inside the machine, resulting in decreased print quality. If this occurs, use this function to dry the drum and eliminate the condensation. The drum dehumidifying operation lasts three minutes. After many documents containing large printed areas (such as photos) or many negative/positive-inverted copies are printed, the print density may temporarily become too light if toner is not automatically replenished. If this occurs, use this function to force replenishing of the toner and immediately return the density to its normal level.
TONER REPLENISHER
D1650iD/D2050iD
7-23
7
Chapter 7
7.4 Specifying User-Managed Service Tasks (USER MANAGEMENT Menu)
To perform the DRUM DEHUMIDIFY function

2 Press the
key twice to select USER MANAGEMENT?, and then press the [Yes] key.
3 Using the
and keys, select DRUM DEHUMIDIFY?, and then press the [Yes] key. Drum drying begins, and the main screen appears.
7-24
D1650iD/D2050iD
7.4 Specifying User-Managed Service Tasks (USER MANAGEMENT Menu) To perform the TONER REPLENISHER function
7
Chapter 7
7-25

2 Press the
key twice to select USER MANAGEMENT?, and then press the [Yes] key.
3 Using the
and keys, select TONER REPLENISHER?, and then press the [Yes] key. Toner replenishing begins, and the main screen appears.
Note While the toner is being replenished, do not turn off the machine or open the Front Cover. If the density of the toner is suitable, do not perform the toner replenishing operation.
D1650iD/D2050iD
7
Chapter 7
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu)
7.5
Specifying Administrative Settings (ADMIN. MANAGEMENT Menu)
From the ADMIN. MANAGEMENT menu, various functions for controlling the use of the machine can be set. In order to set an ADMIN. MANAGEMENT function, the administrator access number must be entered. ADMIN. MANAGEMENT menu:
No. 1 ADMIN. MANAGEMENT AUTO SHUT OFF Description This function can be used to set whether or not the auto poweroff function is performed. The manufacturers default setting is ENABLE. A maximum of 20 accounts can be specified in order to control the use of the machine. Turn on/off user management. Register account access numbers. Change/delete account access numbers. Display/clear the total count for a specific account. Clear the total counts for all accounts.
COPY TRACK
Note The registering and setup of the administrator access number should be performed by the service representative. For details, contact the service representative. The administrator of this machine should be sure not to lose the administrator access number.
7-26
D1650iD/D2050iD
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) To select the ADMIN. MANAGEMENT menu
7
Chapter 7
7-27

2 Press the
key 3 times to select ADMIN. MANAGEMENT?.
3 From the 10-Key Pad, press the key ([1] through [2]) for the ADMIN.
MANAGEMENT function that you wish to set.
The ADMIN. MANAGEMENT functions are as follows: 1 AUTO SHUT OFF 2 COPY TRACK
4 Using the 10-Key Pad, enter the 6digit administrator access number, and then press the [Yes] key.
Tip If, at any time, you wish to quit setting an ADMIN. MANAGEMENT function, press the [No] key. When the message STOP SETTING? appears, press the [Yes] key to quit.
D1650iD/D2050iD
7
Chapter 7
To set the AUTO SHUT OFF function
1 Select the ADMIN. MANAGEMENT

menu.
Refer to To select the ADMIN. MANAGEMENT menu on page 7-27.
2 Press the [1] key from the 10-Key Pad to select AUTO SHUT OFF. 3 Using the 10-Key Pad, enter the 6digit administrator access number, and then press the [Yes] key. The AUTO SHUT OFF appears.
4 Using the
and keys, select ENABLE, and then press the [Yes] key.
The ADMIN. MANAGEMENT menu appears again.

menu.

to select AUTO SHUT OFF.
7-28
D1650iD/D2050iD
7
Chapter 7
7-29
7 Using the
and keys, select OFF, and then press the [Yes] key.
Note If the AUTO SHUT OFF function on the ADMIN. MANAGEMENT menu is set to DISABLE, it will no longer be possible to make copies or print from a computer after the Auto Shut Off function is performed and the machine is turned off. To make copies or print from a computer, turn on the machine.
D1650iD/D2050iD
7
Chapter 7
To turn on/off user (section) management

menu.
2 Press the [2] key from the 10-Key Pad to select COPY TRACK. 3 Using the 10-Key Pad, enter the 6digit administrator access number, and then press the [Yes] key. The COPY TRACK appears.
4 Using the
and keys, select COPY TRACK MODE?, and then press the [Yes] key.
5 Using the
and keys, select either ON or OFF, and then press the [Yes] key.
The COPY TRACK MODE function appears again.
7-30
D1650iD/D2050iD
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) To register user (section) access numbers
7
Chapter 7
7-31

menu.
4 Using the
and keys, select ACCESS NO. REG.?, and then press the [Yes] key.

desired access number for the account (section), and then press the [Yes] key.

Enter a 3-digit access number. If you wish to correct the access number, press the [No] key, and then use the 10-Key Pad to enter the new number.
Once the access number is registered, a screen appears, allowing you to enter the next access number to be registered.
6 When you are finished registering

access numbers, press the [No] key. The ACCESS NO. REG function appears again.
D1650iD/D2050iD
7
Chapter 7
Note If you try to register more than 20 access numbers, the message UP TO 20 SECTIONS appears.
7-32
D1650iD/D2050iD
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) To change/delete user (section) access numbers
7
Chapter 7
7-33

menu.
4 Using the
and keys, select ACCESS NO. REG.?, and then press the [Yes] key.

access number that you wish to change/delete, and then press the [Yes] key.

Enter a 3-digit access number. If you wish to correct the access number, press the [No] key, and then enter the new number.
A confirmation message appears, asking whether or not to keep the registered access number.
6 To change/delete the access number,

press the [No] key.
To keep the currently registered access number, press the [Yes] key.
D1650iD/D2050iD
7
Chapter 7
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) and keys, select either EDIT or DELETE, and then press the [Yes] key.
7 Using the
If EDIT was selected, a screen appears, allowing you to change the access number. If DELETE was selected, the current access number is deleted. (The message ACCESS NO. XXX DELETED appears.) To change or delete other access numbers, return to step 5.
8 Use the 10-Key Pad to enter the new

number.

After the message ACCESS NO. XXX EDITED appears, a screen appears, allowing you to enter the next access number to be changed/deleted.
Note If the new access number has already been registered, the message ACCESS NO. IS USE appears. Press the [No] key, and then enter a different access number.
10 When you are finished changing/

deleting access numbers, press the [No] key. The ACCESS NO. REG function appears again.
7-34
D1650iD/D2050iD
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) To display/clear the total count for a specific account
7
Chapter 7
7-35

menu.
4 Using the
and keys, select COPY TRACK DATA?, and then press the [Yes] key.
5 Using the
and keys, select DISPLAY, and then press the [Yes] key.
D1650iD/D2050iD
Refer toTo select the ADMIN. MANAGEMENT menu on page 7-27.
7
Chapter 7
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) and keys, select the access number for the counter that you wish to check, and then press the [Yes] key.
6 Using the
The desired access (section) number can also be entered using the 10-Key Pad. When clearing the counter for a specific account (section), the access (section) number for that account should be selected.
The total count for the selected account (section) is displayed.
7 To clear the counter, press the [No]

key.
To finish without clearing the counter, press the [Yes] key.
The COPY TRACK DATA function appears again.
8 After the counter is cleared, press the

[Yes] key.
After clearing the counter, if you wish to reset the counter to the previous count, press the [Interrupt] key.
The COPY TRACK DATA function appears again.
7-36
D1650iD/D2050iD
7.5 Specifying Administrative Settings (ADMIN. MANAGEMENT Menu) To clear the total counts for all accounts
7
Chapter 7
7-37

menu.
4 Using the
and keys, select COPY TRACK DATA?, and then press the [Yes] key.
5 Using the
and keys, select CLEAR, and then press the [Yes] key. A confirmation message appears, asking whether or not to clear all counters.

After the message SECTION COUNTER CLEARED appears, the COPY TRACK DATA function appears again.
D1650iD/D2050iD
7
Chapter 7
7.6 Specifying Copy Settings
7.6
Specifying Copy Settings
COPY SETTING 1 & COPY SETTING 2 menus The settings that are automatically selected when the machine is turned off or the [Panel Reset] key is pressed are called the default settings. From the COPY SETTING 1 menu, the default settings for various functions can be specified. COPY SETTING 1 menu:
No. 1 COPY SETTING 1 PAPER PRIORITY Description This function can be used to specify the tray that should be given priority when the AUTO Zoom setting is selected. The manufacturers default setting is 1ST. This function can be used to set the density to TEXT, PHOTO or TEXT/P when the machine is turned off or the [Panel Reset] key is pressed. The manufacturers default setting is TEXT/P. This function can be used to set the density level of the AUTO Density setting to one of the three settings between LIGHT and DARK. The manufacturers default setting is the middle level ( ). This function can be used to set the density level of the manual density setting to one of the nine settings between LIGHT and DARK. The manufacturers default setting is the middle level ( ). This function can be used to set whether the first page of a book to be scanned is on the left (left-bound) or on the right (rightbound). The manufacturers default setting is LEFT. This function can be used to specify the width of the binding area (margin) between 0 mm and 20 mm (in units of 1 mm) when copying documents to be bound. The manufacturers default setting is 10 mm. This function can be used to specify between 5 mm and 20 mm (in units of 1 mm) the width that is erased when making copies with the Erase function set to LEFT, UPPER or FRAME. The manufacturers default setting for the LEFT, UPPER and FRAME Erase settings is 10 mm. This function is used to specify whether or not copying is possible after loading a small document whose size cannot be automatically detected. The manufacturers default setting is ENABLE.
DENSITY PRIORITY
DENSITY LEVEL(A)
DENSITY LEVEL(M)
BINDING POS.
MARGIN SETTING
ERASE SETTING
SMALL ORIGINAL
7-38
D1650iD/D2050iD
7.6 Specifying Copy Settings COPY SETTING 2 menu:

No. 1 COPY SETTING 2 MIXED ORIGINAL Description
7
Chapter 7
COPY PRIORITY
This function can be used to set whether the automatic paper or automatic zoom ratio setting is selected when the machine starts up or after the Control Panel is reset. The manufacturers default setting is AP (auto paper selection). This function can be used to specify if the selected Finishing mode is NON, SORT or GROUP when the machine is turned off or the [Panel Reset] key is pressed. This function can be set if an optional Document Feeder is installed. The manufacturers default setting is NON. This function can be used to select from the following for the page order when the 4in1 Copy mode is selected. PATTERN1 PATTERN2
OUTPUT PRIORITY
4IN1 COPY ORDER
1 2 3 4
1 3 2 4
This function can be set if an optional Document Feeder is installed. The manufacturers default setting is PATTERN1. 5 CRISSCROSS MODE This function can be used to set whether or not copies are fed out in a crisscross pattern when the crisscross output conditions are met. This function can be set if an optional Document Feeder and Job Shifter are installed. The manufacturers default setting is ON. This function is used to select whether or not double-sided printing is used. The optional Duplex Unit must be installed. (Option only for the D2050iD) The manufacturers default setting is OFF.
DUPLEX COPY
D1650iD/D2050iD
7-39
This function can be used to set whether or not the Mixed Orig. function is selected when the machine starts up or after the Control Panel is reset. This function can be set if an optional Document Feeder is installed. The manufacturers default setting is OFF.
7
Chapter 7
To select the COPY SETTING 1 menu

2 Press the
key 4 times to select COPY SETTING 1?.
3 From the 10-Key Pad, press the key for the COPY SETTING 1 function that
you wish to set.
The COPY SETTING 1 functions are as follows: 1 PAPER PRIORITY 2 DENSITY PRIORITY 3 DENSITY LEVEL(A) 4 DENSITY LEVEL(M) 5 BINDING POS. 6 MARGIN SETTING 7 ERASE SETTING 8 SMALL ORIGINAL
Tip If, at any time, you wish to quit setting a COPY SETTING 1 function, press the [No] key. When the message STOP SETTING? appears, press the [Yes] key to quit.
7-40
D1650iD/D2050iD
7.6 Specifying Copy Settings To set the PAPER PRIORITY function
7
Chapter 7
7-41
1 Select the COPY SETTING 1 menu.

to select PAPER PRIORITY.
3 Using the
and keys, select a paper size or paper tray, and then press the [Yes] key.
Select from the following paper trays. 1st Tray, 2nd Tray, 3rd Tray*, 4th Tray*, 5th Tray*, Multiple Bypass *Only with D2050iD If the 5th Tray and Multiple Bypass are installed, the screen shown at the right appears.
The COPY SETTING 1 menu appears again.
Tip If there are multiple paper drawers loaded with paper of the same size and type as that loaded into the paper drawer given priority with the PAPER PRIORITY function, and if the paper in all of these paper drawers are used, a message may appear indicating that paper be loaded into a paper drawer that was not given priority. In this case, load paper according to the message that appears.
D1650iD/D2050iD
Refer to To select the COPY SETTING 1 menu on page 7-40.
7
Chapter 7
To set the DENSITY PRIORITY function

to select DENSITY PRIORITY.
3 Using the
and keys, select TEXT, PHOTO or TEXT/P, and then press the [Yes] key.
If TEXT or TEXT/P is selected, a screen appears, allowing you to select either AUTO or MANUAL. Using the and keys, select either AUTO or MANUAL, and then press the [Yes] key.
7-42
D1650iD/D2050iD
7.6 Specifying Copy Settings To set the AUTO density level (DENSITY LEVEL(A) function)
7
Chapter 7
7-43

to select DENSITY LEVEL(A).
3 Using the
and keys, select one of the three settings between LIGHT and DARK, and then press the [Yes] key. The COPY SETTING 1 menu appears again.
D1650iD/D2050iD
7
Chapter 7
To set the manual density level (DENSITY LEVEL(M) function)

to select DENSITY LEVEL(M).
3 Using the
and keys, select one of the nine settings between LIGHT and DARK, and then press the [Yes] key. The COPY SETTING 1 menu appears again.
7-44
D1650iD/D2050iD
7.6 Specifying Copy Settings To set the BINDING POS. function
7
Chapter 7
7-45

to select BINDING POS..
3 Using the
and keys, select either LEFT or RIGHT, and then press the [Yes] key. The COPY SETTING 1 menu appears again.
D1650iD/D2050iD
7
Chapter 7
To specify the binding width (MARGIN SETTING function)

to select MARGIN SETTING.

binding width (margin), and then press the [Yes] key.

The binding width can be set between 0 mm and 20 mm. If you wish to correct the setting, press the [No] key, and then enter the new number.
7-46
D1650iD/D2050iD
7.6 Specifying Copy Settings To specify the erased width (ERASE SETTING function)
7
Chapter 7
7-47

to select ERASE SETTING.
3 Using the
and keys, select LEFT, UPPER or FRAME, and then press the [Yes] key.
4 Using the 10-Key Pad, enter the width

of the area to be erased, and then press the [Yes] key.
The width of the area to be erased can be set between 5 mm and 20 mm. If you wish to correct the setting, press the [No] key, and then enter the new number.
D1650iD/D2050iD
7
Chapter 7
To set the SMALL ORIGINAL function

to select SMALL ORIGINAL.
3 Using the
and keys, select DISABLE or ENABLE, and then press the [Yes] key.
If a document that cannot be detected is loaded and ENABLE is selected, the paper given priority is used for copying.
7-48
D1650iD/D2050iD
7.6 Specifying Copy Settings To select the COPY SETTING 2 menu
7
Chapter 7
7-49

2 Press the
key 5 times to select COPY SETTING 2?.
3 From the 10-Key Pad, press the key for the COPY SETTING 2 function that
you wish to set.
The COPY SETTING 2 functions are as follows: 1 MIXED ORIGINAL 2 COPY PRIORITY 3 OUTPUT PRIORITY 4 4IN1 COPY ORDER 5 CRISSCROSS MODE 6 DUPLEX COPY
Tip If, at any time, you wish to quit setting a COPY SETTING 2 function, press the [No] key. When the message STOP SETTING? appears, press the [Yes] key to quit.
D1650iD/D2050iD
7
Chapter 7
To set the MIXED ORIGINAL function

to select MIXED ORIGINAL.
3 Using the
and keys, select either ON or OFF, and then press the [Yes] key. The COPY SETTING 2 menu appears again.
7-50
D1650iD/D2050iD
7.6 Specifying Copy Settings To set the COPY PRIORITY function
7
Chapter 7
7-51

to select COPY PRIORITY.
3 Using the
and keys, select AP (auto paper selection), AS (auto zoom ratio) or MANUAL, and then press the [Yes] key. The COPY SETTING 2 menu appears again.
D1650iD/D2050iD
7
Chapter 7
To specify the default finishing mode (OUTPUT PRIORITY function)

to select OUTPUT PRIORITY.
3 Using the
and keys, select NON, SORT or GROUP, and then press the [Yes] key. The COPY SETTING 2 menu appears again.
7-52
D1650iD/D2050iD
7.6 Specifying Copy Settings To set the 4IN1 COPY ORDER function
7
Chapter 7
7-53

to select 4IN1 COPY ORDER.
3 Using the
and keys, select either PATTERN1 or PATTERN2, and then press the [Yes] key. The COPY SETTING 2 menu appears again.
D1650iD/D2050iD
7
Chapter 7
To set the CRISSCROSS MODE function

to select CRISSCROSS MODE.
3 Using the
7-54
D1650iD/D2050iD
7.6 Specifying Copy Settings To set the DUPLEX COPY function
7
Chapter 7
7-55

to select DUPLEX COPY.
3 Using the
D1650iD/D2050iD
7
Chapter 7

7-56
D1650iD/D2050iD
Error Messages
8
Error Messages Chapter 8
8
8.1
8.1 When the Message TONER EMPTY Appears
When the Message TONER EMPTY Appears
When toner is about to run out, the message shown below appears. When this message appears, replace the toner bottle with a new one.
Error Messages
Chapter 8
Note Use only toner developed specifically for this machine. Use of any other type of toner may cause damage to the machine. For details, contact your service representative. In order to prevent the used toner cartridge from dirtying anything, keep it in the box. Dispose of the used toner cartridge according to your local regulations. To replace the toner bottle
1 Open the Front Cover.
8-2
D1650iD/D2050iD
2 Swing out the Toner Bottle Holder,

and then remove the toner bottle.
3 Holding the sealed end of the new

toner bottle up, slowly peel off the seal toward you. the necessary precautions ? Have been observed when peeling off the seal?
Since some toner may spurt out while the seal is being peeled off, be sure to peel off the seal slowly.
4 With the side of the toner bottle

marked UP facing up, insert the toner bottle into the Toner Bottle Holder. the necessary precautions ? Have been observed while inserting the toner bottle?
As shown at the right, the tab on the toner bottle should securely fit into the notch in the Toner Bottle Holder.
5 Lightly tap the bottom of the toner

bottle three or four times.
D1650iD/D2050iD
8-3
Error Messages
Chapter 8
8
then close the Front Cover.
6 Close the Toner Bottle Holder, and

When the Front Cover is closed, the toner automatically begins refilling. Are copies faint immediately after the toner bottle is replaced? Perform the TONER REPLENISHER function in the Utility mode (To perform the TONER REPLENISHER function on page 7-25).
Chapter 8
Error Messages
8-4
D1650iD/D2050iD
8.2 When the Message PAPER JAM Appears
8.2
When the Message PAPER JAM Appears
If a paper misfeed occurs while copying or printing, the message shown below appears, and copying or printing stops.
A message indicating the location of the paper misfeed appears in the bottom line of the screen.
Message OPEN 1st SIDE COVER OPEN 2nd (3rd/4th/5th) SIDE COVER Location of the paper misfeed Multiple Bypass (p. 8-11) Inside the main unit or 1st Tray (p. 8-6) Paper Feed Unit (p. 8-10)
Follow the appropriate procedure described below to clear the misfed paper. To clear a paper misfeed in the Duplex Unit
Note The optional Duplex Unit must be installed. (D2050iD only)
1 Open the Duplex Unit door. 2 Carefully pull out any misfeed paper.
3 Close the Duplex Unit door.

D1650iD/D2050iD 8-5
Error Messages
Chapter 8
To clear a paper misfeed in the main unit or 1st Tray
1 Open the Side Cover of the main unit.

Chapter 8 Error Messages
CAUTION The area around the fusing unit is extremely hot. Touching any part other than those indicated may result in burns. If you get burnt, immediately cool the skin under cold water, and then seek professional medical attention.
CAUTION Decreased copy quality may result if the surface of the PC drum is touched. Be careful not to touch the surface of the PC drum.
PC drum
8-6
D1650iD/D2050iD
2 Pull down the Pressure Levers.

the necessary precautions ? Have been observed when pulling down
Only hold the green part of the Pressure Levers when pulling them down.
Pressure Levers
3 Slowly pull out the paper.
4 While holding the Guide Plate pressed

down, slowly pull out the paper.
D1650iD/D2050iD
8-7
Error Messages
Chapter 8
the Pressure Levers?
8
slowly pull out the paper.
5 While turning the knob on the roller,

the necessary precautions ? Have been observed when turning the roller?
Chapter 8
Only turn the green knob when turning the roller. Be careful not to touch the surface of the PC drum.
Error Messages
6 Close the Side Cover of the main unit.
7 Pull out the 1st Tray. 8 Remove all paper from the tray, and
then place the paper into the tray again.

8-8
D1650iD/D2050iD
10 Close the 1st Tray.

Chapter 8
D1650iD/D2050iD 8-9
Error Messages
To clear a paper misfeed in the Paper Feed Unit
1 Open the Side Cover of the Paper

Feed Unit.
Error Messages
Chapter 8
3 Close the Side Cover of the Paper

Feed Unit.
8-10
D1650iD/D2050iD
8.2 When the Message PAPER JAM Appears To clear a paper misfeed in the Multiple Bypass
Decreased copy quality may result if the surface of the image transfer roller is touched. Be careful not to touch the surface of the image transfer roller.
Image transfer roller
1 Remove all paper from the Multiple

Bypass.
2 Open the Side Cover of the main unit.
D1650iD/D2050iD
8-11
Error Messages
Chapter 8
CAUTION
8
Error Messages
Chapter 8
4 Close the Side Cover of the main unit.
5 Load the paper into the Multiple

Bypass again.
8-12
D1650iD/D2050iD
8.3 When the Message ORIGINAL DOC.JAM Appears
8.3
When the Message ORIGINAL DOC.JAM Appears
If a document misfeed occurs while the document is being fed, the message shown below appears, and copying or printing stops. Remove the misfed document according to the following procedure.
To clear a misfeed in the Automatic Document Feeder (AF-12)
1 Open the Document Feeder Cover.
2 Remove all document pages from the

Document Feeder Tray.
D1650iD/D2050iD
8-13
Error Messages
Chapter 8
8
Feeder.
3 Lift open the Automatic Document
Error Messages
Chapter 8
4 While turning the Document Feed

Knob in the direction of the arrow, slowly pull out the document.
5 Close the Automatic Document

Feeder and the Document Feeder Cover.
8-14
D1650iD/D2050iD
6 Load the documents removed in step

2 back into the tray.
Note If RETURN 1 (2) ORIG. to ADF and PRESS START KEY appears on the display, also load the one or two document pages that caused the paper misfeed.
D1650iD/D2050iD
8-15
Error Messages
Chapter 8
To clear a misfeed in the Duplexing Document Feeder (AFR-19)
1 Pull up the lever for the Document

Feeder Cover to open the cover.
Error Messages
Chapter 8
2 Carefully pull out any misfed

documents.
3 Swing up the Document Guide

Lever.
4 Turn the Document Feed Knob to

feed out any misfed documents.
8-16
D1650iD/D2050iD
5 While supporting the Document

Feed Tray with your right hand, carefully pull out any misfed documents.
6 Return the Document Guide Lever to its original position, and then close the
Document Feeder Cover.
D1650iD/D2050iD
8-17
Error Messages
Chapter 8
8
8.4
Message
8.4 Main Error Messages and Their Remedies
Main Error Messages and Their Remedies

Cause A paper misfeed occurred in the main unit. Remedy Open the cover at the indicated location, and then remove the misfed paper. (When the Message PAPER JAM Appears on page 8-5) Check the message in the display for the location of the paper misfeed, and then remove the misfed paper. (When the Message PAPER JAM Appears on page 8-5) Open the Document Feeder Cover and the Document Feeder, and then remove the misfed paper. (When the Message ORIGINAL DOC.JAM Appears on page 8-13) Remove the paper from the Manual Bypass. Securely close the Front Cover.
Chapter 8
PAPER JAM (Flashing alternately) OPEN XXX SIDE COVER
All misfed paper was not removed from the main unit.
Error Messages
ORIGINAL DOC.JAM (Flashing alternately) OPEN DOC.FEED COVER
A paper misfeed occurred in the Document Feeder. All misfed paper was not removed from the Automatic Document Feeder. Paper is loaded in the Manual Bypass. The Front Cover of the main unit is open or not securely closed.
REMOVE PAPER IN BYPASS TRAY

FRONT COVER OPEN (Flashing alternately) CLOSE FRONT COVER DUPLEX COVER OPEN (Flashing alternately) CLOSE DUPLEX COVER DOCUMENT COVER OPEN (Flashing alternately) CLOSE DOCUMENT COVER DOC.FEED COVER OPEN (Flashing alternately) CLOSE DOC.FEED COVER TONER EMPTY (Flashing alternately) SUPPLY TONER PAPER EMPTY (Flashing alternately) LOAD PAPER (#XXX)
The Duplex Unit Cover is open or not securely closed.
Securely close the Duplex Unit Cover.
The Document Feeder is lifted up (while a document is loaded into it).
Securely close the Document Feeder.
The Document Feeder Cover is open.
Securely close the Document Feeder Cover.
The toner is empty. Copying and printing cannot be performed.
Replace the toner bottle with a new one. (To replace the toner bottle on page 8-2)
The selected paper tray has run out of paper. # indicates the paper tray, and XXX indicates the paper size.
Load paper of the specified size into the specified paper tray.
8-18
D1650iD/D2050iD
8
Remedy Load a document into the Document Feeder. Securely close the Document Feeder.
Message SET ORIGINAL TO ADF
Cause A document was not loaded into the Document Feeder before beginning a copy function (such as, 2in1 copying or Mixed Orig. copying) that uses the Document Feeder. Otherwise, the Document Feeder is lifted up. When interrupting a copy job to perform a different copy operation other than the Book Separation function, the document for the interrupted copy job was left in the Document Feeder. (While specifying Copy settings) The selected paper tray has run out of paper. # indicates the paper tray, and XXX indicates the paper size. While copying, the size of the paper in the selected paper tray has changed. While copying documents with mixed sizes using the Auto Paper function, paper of a suitable size could not be found. # indicates the paper tray, and XXX indicates the paper size. While copying using the Auto Paper function, paper of a suitable size could not be found. While copying using the Auto Size function, the combination of the document and paper sizes caused the zoom ratio to exceed the range between 0.5 and 2.0. The paper loaded in the paper tray caused a size error. # indicates the paper tray, and XXX indicates the paper size.
REMOVE PAPER
Remove the document from the Document Feeder.
TEXT/P 1.00 [A]#XXX:EMPTY
Either load paper of the specified size into the specified paper tray, or press the [Paper] key and select a different paper size. Either load paper of the specified size, or press the [Paper] key and select a different paper size.
NO SUITABLE PAPER (Flashing alternately) LOAD PAPER (#XXX)
APS SIZE ERROR
Either load paper of a suitable size, or press the [Paper] key and select a different paper size. Either load paper of a suitable size, or use the and keys to specify the zoom ratio.
AMS SIZE ERROR
PAPER SIZE ERROR (Flashing alternately) RESET PAPER (#XXX)
Pull open the paper tray with the size error, and then close it again. Check if a custom paper size has been entered, and correct the paper size using the appropriate Utility mode function. Press any key, or turn the machine off, then on again. (The scanned data should be cleared from the memory.) Press any key, or turn the machine off, then on again. (The received image data should be cleared from the memory.) Insert the counter key.
MEMORY FULL (Flashing alternately) PRESS ANY KEY
The size of the data for the scanned image has exceeded the capacity of the memory.
PC PRINT
MEMORY FULL
The image data received from the computer has exceeded the capacity of the memory. A counter key is not inserted.
SET PLUG-IN COUNTER
D1650iD/D2050iD
8-19
Error Messages
Chapter 8
8
Message UPPER TRAY FULL (Flashing alternately) Cause
Remedy Remove all paper from the Upper Copy Tray of the Job Separator.
Chapter 8
REMOVE PAPER TRAY MOVEMENT ERROR (Flashing alternately) PRESS ANY KEY
If the optional Job Separator is installed and the paper in the Upper Copy Tray has reached the maximum capacity, printing cannot continue. The optional Job Separator is installed and the paper in either the Upper Copy Tray or the Lower Copy Tray has reached the maximum capacity when the machine is turned on, when copying begins, or when starting to print. A maintenance is due. The Imaging Unit should be replaced. Some problem occurred in the machine.
Remove the paper from the Upper Copy Tray or the Lower Copy Tray of the Job Separator, and then press any key.
Error Messages
CALL SERVICE(M1) CALL SERVICE(M2) MACHINE TROUBLE (Flashing alternately) (C####)
Contact your service representative. Contact your service representative. Turn the machine off, then on again. If the error is still displayed, contact your service representative.
8-20
D1650iD/D2050iD
Troubleshooting
Troubleshooting
9
Chapter 9
9
9.1
9.1 When Incorrect Copies Are Produced
When Incorrect Copies Are Produced

Symptom The copy is too light. Possible Cause The copy density is set too light. The copy paper is damp. Remedy Use the Auto/Photo key to select a darker copy density (p. 5-36). Replace the paper. (p. 3-5)
Chapter 9
The copy is too dark.
The copy density is set too dark. The document was not pressed close enough against the Original Glass.
Use the Auto/Photo key to select a lighter copy density (p. 5-36). Position the document so that it is pressed closely against the Original Glass. (p. 3-11)
Troubleshooting
The copy is blurry.
The copy paper is damp. The document was not pressed close enough against the Original Glass.
Replace the paper. (p. 3-5) Position the document so that it is pressed closely against the Original Glass. (p. 3-11)
There are streaks through the copy.
The Original Glass is dirty. The document pad is dirty.
Wipe the glass with a soft dry cloth. (p. 10-7) Clean the document pad with a soft cloth dampened with a mild detergent. (p. 10-7) Place a blank sheet of paper over the document. (p. 3-13) If a thin double-sided document is being copied, the information on the back side may be reproduced in the copy. Use the Auto/ Photo key to select a lighter density for the background. (p. 5-36) Contact your service representative.
The original is highly translucent, such as diazo photosensitive paper or OHP transparencies. There are specks throughout the entire copy. A double-sided document is being copied.
The Imaging Unit has reached the end of its service life.
9-2
D1650iD/D2050iD
9.1 When Incorrect Copies Are Produced
9
Remedy Clean the document pad with a soft cloth dampened with a mild detergent. (p. 10-7) Select a copy paper size that is the same as the size of the document. (p. 5-22) Otherwise, select the Auto Size function to enlarge the copy to the selected paper size. (p. 5-30) Select a copy paper size that is the same as the size of the document. Otherwise, select a copy orientation that is the same as the orientation of the document. Select a zoom ratio that adjusts the copy size to the size of the selected paper. (p. 5-30) Otherwise, select the Auto Size function to reduce the copy to the selected paper size. (p. 5-22) Correctly position the document against the Document Scales. (p. 3-11) If the Document Feeder is installed, correctly adjust the Document Guide Plates for the size of the document. (p. 3-9) Lift open the Document Feeder, and correctly position the document against the Document Scales. (p. 3-11) Slide the Document Guide Plates against the edges of the document. Flatten the paper before loading it.
Symptom The edge of the copy is dirty.
Possible Cause The document pad is dirty.
The selected paper size is larger than the document (with a Zoom setting of 1.00).
The orientation of the document is different from the orientation of the copy (with a Zoom setting of 1.00).
The copy was reduced to a size smaller than the paper (with a reduced zoom ratio).
The image is not aligned properly on the paper.
The document is not positioned correctly.
The document is not positioned correctly in the Document Feeder.
The Document Guide Plates are not slid up against the edges of the document. Curled paper was loaded into the paper tray.
D1650iD/D2050iD
9-3
Troubleshooting
Chapter 9
9
9.2
9.2 When Copying Is Not Performed Correctly
When Copying Is Not Performed Correctly

Symptom Nothing appears on the display. Possible Cause Only the [Start] key indicator is lit up in green. Remedy The machine is in Energy Saver mode (preheat mode). Press any key to cancel Energy Save mode. (p. 2-23) Set the Power Switch to O (p. 2-22). Enter the user (section) access number according to the instructions in Access Numbers (p. 6-23).
Chapter 9
The AUTO SHUT OFF function was activated. The [Start] key indicator is not lit up in green. A user (section) access number has not been entered.
Troubleshooting
Even though the [Start] key is pressed, no copies are made.
If the Error indicator on the Control Panel is lit, an error has occurred. If the machine was just turned on, it is still warming up.
Follow the instructions in any messages that appear on the display. The machine takes about 30 seconds to warm up after it is turned on. Press the [Interrupt] key to cancel Interrupt mode. (p. 5-38)
The machine cannot be set to Copy mode.
The machine is in Interrupt mode (the Interrupt indicator is lit).
The machine cannot be turned on.
The power supply cord has been unplugged from the electrical outlet. The breaker for the electrical circuit has been tripped.
Plug the power supply cord into the electrical outlet. Close the breaker for the electrical circuit.
9-4
D1650iD/D2050iD
10
Appendix
10
Appendix Chapter 10
10
10.1 Specifications
Main Unit D1650iD/D2050iD
Specification Type Platen Photo conductor Copying system Developing system Fusing system D1650iD Desktop/Console* Stationary OPC Electro photographic printing system MTHG system Heat-roller-fixing system 600 dpi 600 dpi
10.1 Specifications
D2050iD
Chapter 10
Resolution Document
Types: Sheets, books, and other three-dimensional objects Size: Maximum A3 L, Ledger L (11 17 L) Weight: 3 kg Plain paper (60 g/m2 to 90 g/m2), recycled paper (60 g/m2 to 90 g/m2) Special paper: Thick paper (91 g/m2 to 157 g/m2), OHP transparencies, postcards, envelopes and label sheets * Special paper can only be fed through the 1st Tray and the Manual Bypass. 1st Tray: In metric: A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C, FLS (210 mm 330 mm) In inches: Ledger L, 11 14 L, Legal L, Letter L/C, Invoice L/C (5-1/2 8-1/2 L/C) Manual Bypass: Width: 90 mm to 297 mm, length: 140 mm to 432 mm 1st Tray: Plain or recycled paper: 250 sheets Special paper (cards, OHP transparencies, postcards, label sheets): 20 sheets Envelopes: 10 envelopes Manual Bypass: Plain, recycled or special paper: 1 sheet Less than 30 seconds (at room temperature (23C)) Less than 7 seconds (using the 1st Tray loaded with A4 C) 7 sheets/minute (A3 L) 13 sheets/minute (A4 L) 16 sheets/minute (A4 C) 18 sheets/minute (B5 C) 12 sheets/minute (A3 L) 16 sheets/minute (A4 L) 20 sheets/minute (A4 C) 23 sheets/minute (B5 C)
Paper types
Appendix
Paper sizes
Paper capacity
Warm-up time First-page print time Copy speed
Magnification ratios
Full size: 1.00 Enlargement ratios: 1.15, 1.41, and 2.00 Reduction ratios: 0.81, 0.70, and 0.50 Zoom ratios: 0.50 to 2.00 (in 0.01 increments) 1 to 99 sheets Automatic, manual
Multiple copies Density control
10-2
D1650iD/D2050iD
10.1 Specifications
10
D1650iD D2050iD Leading edge: 4 mm, Trailing edge: 4 mm, Rear edge: 4 mm, Front edge: 4 mm AC 220 to 240 V, 4.5 A (D1650iD), 5.5 A (D2050iD), 50/60 Hz 230 V: 1050 W (D1650iD), 1250 W (D2050iD) 599 mm (width) 620 mm (depth) 487 mm (height) 39 kg Copier: 32 MB (Can be increased to a maximum of 96 MB.)
Specification Image loss Power requirements Power consumption Size Weight Standard memory
* Depend on number of Paper Feed Unit option.
D1650iD/D2050iD
10-3
Appendix
Chapter 10
10
Duplexing Document Feeder AFR-19
Specification Document feed method
10.1 Specifications
Standard method: Single-sided documents and double-sided documents Mixed document sizes: Single-sided documents and double-sided documents Standard method: Plain paper Single-sided: 35 g/m2 to 128 g/m2 Double-sided: 50 g/m2 to 128 g/m2 Mixed Orig. function: Plain paper (50 g/m2 to 128 g/m2) Standard method: A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C, B6 L Mixed document sizes: Refer to the table below. Maximum 80 sheets (80 g/m2) Less than 48 W 582 mm (width) 558 mm (depth) 145 mm (height) Less than 9.4 kg
Document type
Document size Document loading capacity
Chapter 10 Appendix
Power consumption Size Weight
Mixed Width Document Sizes (AFR-19)

Maximum Document Width Mixed Width Document Detection 297 mm A3 L A4 C 257 mm B4 L B5 C 210 mm A4 L A5 C 182 mm 148 mm B5 L A5 L 297 mm A3 L 2 2 2 2 2 2 A4 C 2 2 2 2 2 2 257 mm B4 L 2 2 2 2 2 B5 C 2 2 2 2 2 210 mm A4 L 2 2 2 A5 C 2 2 2 182 mm B5 L 2 2 148 mm A5 L 2
2: Copying possible : Copying not possible
10-4
D1650iD/D2050iD
10.1 Specifications Automatic Document Feeder AF-12

Specification Document feed method Document type Document size Standard method: Single-sided documents Mixed document sizes: Single-sided documents Standard method: Plain paper (50 g/m2 to 110 g/m2) Mixed Orig. function: Plain paper (60 g/m2 to 90 g/m2)
10
Standard method: A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C Mixed document sizes: Combination of A3 L and A4 C, B4 L and B5 C, or A4 L and A5 C Maximum 50 sheets (80 g/m2) Less than 36 W 598 mm (width) 483 mm (depth) 102 mm (height) Less than 6.3 kg
Document loading capacity Power consumption Size Weight
Paper Feed Unit PF-126

Specification
Paper sizes
In metric: A3 L, B4 L, A4 L/C, B5 L/C, A5 C, FLS (210 mm 330 mm) In inches: Ledger L, 11 14 L, Legal L, Letter L/C, Invoice C (5-1/2 8-1/2 C) 250 sheets Less than 9 W 590 mm (width) 558 mm (depth) 108 mm (height) 5.5 kg
Paper capacity Power consumption Size Weight
Shifting Unit OT-103

Specification Shifting amount Paper capacity Power consumption 28 mm 250 sheets Less than 63 W
D1650iD/D2050iD
10-5
Appendix
Paper types
Plain paper (60 g/m2 to 90 g/m2), recycled paper (60 g/m2 to 90 g/ m 2)
Chapter 10
10
Job Separator JS-204
Specification Paper types
10.1 Specifications
Plain paper (60 g/m2 to 90 g/m2), recycled paper (60 g/m2 to 90 g/ m 2) Special paper: Cards (91 g/m2 to 157 g/m2), OHP transparencies, postcards, envelopes, and label sheets Upper Copy Tray: Plain or recycled paper: 100 A4-size sheets, 50 sheets of other than A4 size (stacked up to 22 mm high) Special paper: 10 sheets Lower Copy Tray: Plain or recycled paper: 150 A4-size sheets, 75 sheets of other than A4 size Special paper: 20 sheets Less than 24 W
Paper capacity
Chapter 10
Power consumption
Multiple Bypass MB-6

Specification Paper types Plain paper (60 g/m2 to 90 g/m2), recycled paper (60 g/m2 to 90 g/ m 2) Special paper: Cards (91 g/m2 to 157 g/m2), OHP transparencies, postcards, envelopes, and label sheets A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C, FLS (210 mm 330 mm) (Width: 90 mm to 297 mm; Length: 140 mm to 432 mm) Plain or recycled paper: 100 sheets Special paper (cards, OHP transparencies, postcards, label sheets): 20 sheets Envelopes: 10 envelopes Less than 9 W (Maximum) 439 mm (width) 435 mm (depth) 137 mm (height) 3.0 kg
Appendix
Paper sizes Paper capacity
Power consumption Size Weight
10-6
D1650iD/D2050iD
10.2 Care of the Machine
10
10.2
Care of the Machine
Cleaning Turn off the machine before cleaning it. Housing
Clean the surface of the housing by wiping it with a soft cloth dampened with a mild household detergent.
Original Glass
Document Pad
Clean the surface of the document pad by wiping it with a soft cloth dampened with alcohol.
D1650iD/D2050iD
10-7
Appendix
Clean the Original Glass by wiping it with a soft, dry cloth.
Chapter 10
10
Control Panel
10.2 Care of the Machine
Clean the Control Panel by wiping it with a soft, dry cloth.
CAUTION Incorrectly cleaning the Control Panel keys may damage them. Never use mild household detergent or glass cleaner to clean the Control Panel.
Appendix
10-8
Chapter 10
D1650iD/D2050iD
10.3 Function Combination Table
10
10.3
Function Combination Table
Function Combination Table for D1650iD
D1650iD/D2050iD
10-9
Appendix
Chapter 10
10
Function Combination Table for D2050iD
10.3 Function Combination Table
Appendix
Function Combination Codes
Code 2 Description The functions can be combined. When mode B is set, mode A is canceled automatically. The functions cannot be combined. Mode B cannot be set. This combination possibility does not exist during operation. APS is skipped. Book Separation can be combined with Sort/Group. However, regardless of the selected Finishing setting, the final output is the same. Book Separation + Duplex can be combined with Sort/Group. However, regardless of the selected Finishing setting, the final output is the same.
Chapter 10
\ (1) (2) (3)
10-10
D1650iD/D2050iD
10.4 Paper Size and Zoom Ratio Tables
10
10.4
Paper Size and Zoom Ratio Tables
Copy Paper Sizes

Paper format A3 A4 A5 A6 B4 B5 B6 Postcard Size (millimeters) 297 mm 420 mm 210 mm 297 mm 148 mm 210 mm 105 mm 148 mm 257 mm 364 mm 182 mm 257 mm 128 mm 182 mm 100 mm 148 mm Size (inches) 11-3/4 16-1/2 8-1/4 11-3/4 5-3/4 8-1/4 4-1/4 5-3/4 10 14-1/4 7-1/4 10 4 5-3/4 5 7-1/4
Paper format Ledger 11 14 Computer 10 14 9-1/4 14 Legal Foolscap Foolscap Foolscap Foolscap 8-1/4 11-3/4 Letter Government Letter Quarto Statement Invoice Folio Government Legal
Size (inches) 11 17 11 14 10-1/8 14 10 14 9-1/4 14 8-1/2 14 8-1/2 13 8 13 8-2/3 13 8-1/4 13 8-1/4 11-3/4 8-1/2 11 8 10-1/2 8 10 5-1/2 8-1/2
Size (millimeters) 279 mm 432 mm 279 mm 356 mm 257 mm 356 mm 254 mm 356 mm 236 mm 356 mm 216 mm 356 mm 216 mm 330 mm 203 mm 330 mm 220 mm 330 mm 210 mm 330 mm 210 mm 301 mm 216 mm 279 mm 203 mm 267 mm 203 mm 254 mm 140 mm 216 mm
D1650iD/D2050iD
10-11
Appendix
Chapter 10
10
Zoom Ratios
Metric sizes Document size A3 297 mm 420 mm 11-3/4 16-1/2
Paper size A4 A5 B4 B5
Zoom ratio
0.70 0.50 0.86 0.61 0.70 0.50 0.86 0.61 1.41 1.22 0.70 0.86 1.41 2.00 1.73 1.22 2.00 1.41 1.73 1.22 0.81 0.57 0.70 0.50 1.15 0.81 0.57 0.70 1.63 1.15 1.41
A4 210 mm 297 mm 8-1/4 11-3/4
A5 A6 B5
Chapter 10
B6 A3 B4 A5 148 mm 210 mm 5-3/4 8-1/4 A6 B6 A4 A3 B4 B5 A6 105 mm 148 mm 4-1/4 5-3/4 A4 A5 B5 B6 B4 257 mm 364 mm 10 14-1/4 A4 A5 B5 B6 A3 B5 182 mm 257 mm 7-1/4 10 A5 A6 B6 A3 A4 B4
Appendix
10-12
D1650iD/D2050iD
10.4 Paper Size and Zoom Ratio Tables 0.81 1.64 1.15 2.00 1.41
10
B6 128 mm 182 mm 5 7-1/4
A6 A4 A5 B4 B5
English sizes Document size 11 17 279.4 mm 431.8 mm Paper size 1114 Legal Foolscap Letter Invoice 11 15 279.4 mm 381 mm 11 14 Legal Foolscap Letter Invoice 11 14 279.4 mm 355.6 mm Legal Foolscap Letter Invoice Legal 8-1/2 14 215.9 mm 355.6 mm Foolscap Letter Invoice 11 17 Foolscap 8-1/2 13 215.9 mm 330.2 mm Letter Invoice 11 17 11 14 Letter 8-1/2 11 215.9 mm 279.4 mm Invoice 11 17 11 14 Zoom ratio
0.82 0.77 0.75 0.50 0.93 0.75 0.77 0.73 0.50 0.77 0.77 0.77 0.50 0.92 0.78 0.60 1.21 0.84 0.65 1.30 1.07 0.64 1.29 1.27
D1650iD/D2050iD
10-13
Appendix
Chapter 10
0.64
10
Invoice 5-1/2 8-1/2 139.7 mm 215.9 mm

11 17 11 14 Legal Foolscap Letter
2.00 1.64 1.54 1.50 1.29
Zoom ratio=Paper size/Document size 1 inch = 25.4 mm 1 mm = 0.0394 inch
Appendix
10-14
Chapter 10
D1650iD/D2050iD
11
Index
11
Index Chapter 11
11
11.1 Index
11.1 Index
Numerics
1st Tray paper setting ....................................................................... 7-19 2in1 copying ........................................................................................ 6-2 4in1 copying ........................................................................................ 6-2
A
Administrative settings ...................................................................... 7-26 Auto panel reset .........................................................................2-23, 7-7 Auto paper ........................................................................................ 5-22 Auto shut off ...............................................................................2-23, 7-9 Administrative settings ................................................................ 7-28 Automatic paper size detection units ................................................ 7-18
Chapter 11
B
Binding margin .................................................................................. 6-18 Book separation .................................................................................. 6-4
C
Index
Care of the machine .......................................................................... 10-7 Components ........................................................................................ 2-8 Control Panel Access key .................................................................................. 6-23 Control panel ..................................................................................... 2-17 Energy save key .......................................................................... 2-23 Interrupt key ................................................................................ 5-38 Copy density ..................................................................................... 5-36 Setting ......................................................................................... 5-37 Copy functions 4in1 copy order ............................................................................ 7-53 Binding position ........................................................................... 7-45 Binding width ............................................................................... 7-46 Copy priority ................................................................................ 7-51 Crisscross mode .......................................................................... 7-54 Default density level (Auto) ......................................................... 7-43 Default density level (Manual) ..................................................... 7-44 Default finishing mode ................................................................. 7-52 Default mixed originals setting .................................................... 7-50 11-2 D1650iD/D2050iD
11.1 Index
11
Density priority .............................................................................7-42 Duplex copy .................................................................................7-55 Erased width ................................................................................7-47 Priority paper size or tray .............................................................7-41 Small original ...............................................................................7-48 Copy program Recalling ......................................................................................6-22 Storing ..........................................................................................6-20 Copying Simple copying ...............................................................................3-2
D
Default settings ..................................................................................2-22 DENSITY(BOOK) ..............................................................................7-12 Document feeder ..................................................................... 7-11, 10-5 Document misfeed .............................................................................8-13 Drum dehumidifying ...........................................................................7-24
E
Energy save mode ..................................................................... 2-23, 7-8 Erase function ....................................................................................6-15 Error messages .................................................................................8-18
F
Finishing copies .................................................................................6-10 Grouping ......................................................................................6-13 Sorting ..........................................................................................6-12 Function combination table ................................................................10-9
I
Incorrect copies ...................................................................................9-2 Installation site .....................................................................................2-2 Interrupting copy jobs ........................................................................5-38
J
Job separator .....................................................................................10-6
D1650iD/D2050iD
11-3
Index
Chapter 11
11 L
11.1 Index
Language setting .............................................................................. 7-15 LCD contrast ..................................................................................... 7-14 Legal restrictions on copying .............................................................. 2-7 Loading paper ..................................................................................... 3-4 1st Tray ......................................................................................... 3-5 2nd (3rd/4th/5th) Tray .................................................................... 3-7 Bypass Trays ............................................................................... 5-10 Loading the documents ....................................................................... 3-9 Books .......................................................................................... 3-15 Document feeder ........................................................................... 3-9 Mixed sizes .................................................................................. 3-16 OHP transparencies .................................................................... 3-13 Original glass ............................................................................... 3-11
M
Chapter 11
Machine settings ................................................................................. 7-5 Main unit ........................................................................................... 2-10 Manual feeding ................................................................................... 5-8 Manual paper selection ..................................................................... 5-23 Menu commands ................................................................................ 7-3 Multiple bypass ................................................................................. 10-6
Index
N
Negative/positive inverted copying ................................................... 6-17
O
Operation precautions ......................................................................... 2-4 Options Document feeder ......................................................................... 2-13 Job separator .............................................................................. 2-16 Multiple bypass ............................................................................ 2-14 Paper feed unit ............................................................................ 2-15
11-4
D1650iD/D2050iD
11.1 Index
11
P
Paper feed unit ..................................................................................10-5 Paper feeding ......................................................................................1-4 Paper misfeed clearing ........................................................................8-5 Automatic document feeder .........................................................8-13 Main unit ........................................................................................8-6 Multiple bypass ............................................................................8-11 Paper feed unit .............................................................................8-10 Paper orientation .................................................................................1-5 Paper size and zoom ratio tables ....................................................10-11 Paper source .....................................................................................5-22 Setup ............................................................................................7-16 Paper specifications ............................................................................5-2 Paper type function ............................................................................7-22 Power source .......................................................................................2-2 Power supply .....................................................................................2-22
Q
Queued copy jobs ..............................................................................2-24
Scanning image quality .....................................................................7-11 Shifting unit ........................................................................................10-5 Space requirements ............................................................................2-3 Specifications ....................................................................................10-2
T
Toner replenishing ..................................................................... 7-25, 8-2 TOTAL COUNT .................................................................................3-19 Turning on/off ....................................................................................2-22
D1650iD/D2050iD
11-5
Index
Chapter 11
11 U
User management
11.1 Index
Administrative settings ................................................................ 7-30 User-managed service tasks ............................................................ 7-23 Utility mode ......................................................................................... 7-2 Copy setting 1 ............................................................................. 7-40 Copy setting 2 ............................................................................. 7-49
Z
Zoom setting ..................................................................................... 5-30 Auto zoom ratio ........................................................................... 5-31 X/Y zoom function ....................................................................... 5-34
Index
11-6
Chapter 11
D1650iD/D2050iD
Copyright 2003 DEVELOP
The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.
DEVELOP GmbH Minoltaring 11 D-30855 Langenhagen Telefon (0511) 53345-0 Telefax (0511) 53345-305

User Manual: D1650iD/D2050iD

Uploaded by

Copyright:

Available Formats

User Manual: D1650iD/D2050iD

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Manual: D1650iD/D2050iD

Uploaded by

Copyright:

Available Formats

4034-7707-01

3.4 3.5 3.6

Before Making Copies

5.2 5.3 5.4

Advanced Copy Operations

Utility Mode Copy Functions

1.2 Explanation of Manual Conventions

Explanation of Manual Conventions

1 The number 1 as formatted here indicates the

2 Subsequent numbers as formatted here

An illustration inserted here shows what operations must be performed.

1.3 Explanation of Basic Concepts and Symbols

Explanation of Basic Concepts and Symbols

1.4 Energy Star

1.5 Safety Information

Warning and Precaution Symbols

Ignoring this warning could cause serious injury or even death.

Ignoring this caution could cause injury or damage to property.

1.5 Safety Information

1.5 Safety Information CAUTION

1.5 Safety Information

1.5 Safety Information For users in countries subject to Class B regulations

For users in countries not subject to Class B regulations

1.5 Safety Information

Laser Aperture of the Print Head Unit Print Head

1.5 Safety Information CDRH Regulation

1.5 Safety Information

1.5 Safety Information

2.1 Installation Precautions

Power Source The power source requirements are as follows.

Voltage fluctuation: Maximum 10% Frequency fluctuation: Maximum 3 Hz

Use a power source with as little voltage or frequency fluctuations as possible.

2.1 Installation Precautions Space Requirements

<D1650iD> 1099 599 1024

<D2050iD> 1099 599 1069 **400 356

2.2 Operation Precautions

2.2 Operation Precautions

Store the supplies in a location that meets the following requirements.

2.2 Operation Precautions

2.3 Legal Restrictions on Copying

Legal Restrictions on Copying

2.4 Components and Their Functions

Components and Their Functions

2.4 Components and Their Functions

* The internal options are not shown.

2.5 Part Names and Their Functions

Part Names and Their Functions

2.5 Part Names and Their Functions

Part Name Copy Tray Front Cover 1st Tray

Description Collects fed-out copies facing down.

Opened when replacing the toner bottle. (p. 8-2)

2.5 Part Names and Their Functions

Part Name Imaging Unit

Toner Bottle Holder Pressure Lever

2.5 Part Names and Their Functions Document Feeder (Optional)

2.5 Part Names and Their Functions

Part Name Bypass Tray Bypass Tray Extender

Opened when clearing paper misfeeds. (p. 8-10)

2.5 Part Names and Their Functions