Sensor systems for turbomachinery

Sensor systems applications

For over 50 years, Vibro-Meter has provided superior quality vibration sensing systems to monitor critical plant and equipment. Today, our sensor systems are successfully used in numerous industries where high capital rotating machinery represents a major asset. They protect and monitor thousands of machines worldwide: Heavy-duty gas turbines Industrial and aero-derivative gas turbines Steam turbines (nuclear and conventional) Hydro turbines Large generators Large pumps, compressors and fans Large electric motors and propellers

Whether your business is power generation, oil and gas production, petrochemical or marine, understanding the condition of your machinery and its mechanical behavior is necessary, to prevent failure and achieve optimum efficiency. We make it our business to provide the best solutions for your measurement and monitoring requirements, to protect your investment. This helps you reach higher levels of reliability, machine availability and output. Today, our highly reliable sensor systems for harsh environments are adopted by most major OEMs.

Sensor systems overview

Whether measuring dynamic pressure, acceleration or displacement, Vibro-Meter offers the most accurate, reliable and cost-effective solutions available. We have a comprehensive range of sensor systems which are standard solutions with numerous OEMs.:

CA and CE accelerometers

2-5

provide vibration measurements in harsh industrial conditions. We have a wide range of sensors with sensitivities from 10 to 100pC/g, for a wide range of temperatures: from standard (120oC) up to extreme (700oC). The CA series work in the most severe environments, while the CE series include conditioners and are hence more economical and simpler to integrate.

CP dynamic pressure sensors

6-7

are qualified by major OEMs for gas turbine combustor pulsation monitoring. The CP series use Vibro-Meters acceleration compensation patented technology, and reach the highest sensitivity in the industry (over 750pC/bar). They have an extreme temperature capability (up to 777oC) and a very high frequency response range (up to 15 kHz). Vibro-Meters CP sensors are key to optimizing low NOX emissions.

TQ proximity probes

8-9

are eddy current transducers, for contactless measurements of relative vibration or axial displacement in turbines, alternators, turbo-compressors and centrifugal pumps. Our wide series of probes is API 670 compliant and available for high-pressure and watertight applications, with measuring ranges up to 12 mm.

CV velocity sensors

10 - 11

are widely installed on all types of low speed turbomachinery, especially hydro turbinegenerator sets. The CV series measure absolute vibration down to very low frequencies, thanks to the conditioners low frequency linearization function.

EW ice detection system

10 - 11

detects initiation of ice on gas turbines inlets. The EW system discriminates between ice and water, and optimizes the use of bleed air in gas turbine de-icing systems.

LS air gap monitoring system

10 - 11

measures the air gap between rotor and stator, using a capacitive technology. LS systems are an important indicator of machine condition in hydroelectric generators.

Complete monitoring solutions Case studies Our expertise

12 13 15
1

Accelerometers with external charge amplifiers

Transducer Cable Ext. cable Conditioner Cable Galvanic separation

CA 202

100pC/g (400g) -55 to 260oC 0.5 to 8000 Hz

Softline, armored GSI 124 IPC 704 in ABA 160

For heavy duty gas and steam turbines. Piezoelectric accelerometer for use over an extended temperature range.

K2xx (3xx)

2 or 3-wire transmission EC 222 - softline

CA 280

100pC/g (500g) -55 to 260oC 0.5 to 10000 Hz

EC 119 (390) - softline, armored

IPC 704 conditioner

For heavy duty and aero-derivative gas turbines, gear boxes, compressors and marine applications. Multi-purpose, compact piezoelectric accelerometer for use over an extended temperature range. Signal conditioner for CA and CP sensors Configurable high and lowpass filters. Freq. range 0.5 Hz to 20 kHz

GSI 124 galvanic separation unit

Power supply for 2-wire transmission systems installed in potentially explosive environments AC signal transmission over long distances (1000 m) Galvanic separation, 4 kVRMS High rejection of frame voltage DIN-rail mounting Ex certified versions

CA 306

50pC/g (100g) -55 to 500oC 5 to 3000 Hz

MI, overbraided

EC 153 - softline

Optional integrator for a velocity signal output Optional 2-wire current or 3-wire voltage transmission Ex certified versions

For aero-derivative and industrial gas turbines. Piezoelectric accelerometer for use at high temperatures. Similar parts are standard with numerous OEMs.

EC 069 - MI

EC 119 (390)

Softline, armored

ABA 1xx industrial housings

Protection against mechanical damage, water and dust (IP66 class) Several models and configurations, suitable for 1 up to 10 conditioners Diecast polyester or aluminium enclosure, fully insulated and corrosionresistant Ex certified versions

CA 134

10pC/g (500g) -196 to 500oC 0.5 to 6000 Hz For cryogenic applications and gas turbines. Piezoelectric accelerometer for use over a very wide temperature range.
EC 112 - MI EC 153 - softline

CA 901

10pC/g (500g) -196 to 700 C 3 to 3700 Hz

o

MI

EC 153 - softline

For heavy duty gas turbines. Piezoelectric accelerometer for use at extreme temperatures. Similar parts are standard with numerous OEMs.
MI = Mineral integral Certified products versions for use in potentially explosive atmospheres are available. 2 3

Accelerometers with built-in or attached electronics

Transducer Cable Ext. cable Junction box Cable Galvanic separation

CE 134

5A/g (400g) -55 to 350oC 5 to 10000 Hz For heavy duty gas turbines, aero-derivative gas turbines and compressors. Piezoelectric accelerometer with attached electronics, for use over an extended temperature range.
Softline, armored Threaded

EC 175

Softline, armored

GSI 124 EE 143 Softline JB 116 (JB 105)

K2xx

2-wire transmission EC 175 Softline, armored

CE 281

10A/g (200g) -55 to 260oC 3 to 10000 Hz

Softline, armored Bayonet EE 139 Softline

JB 1xx junction boxes

Protection against mechanical damage, water and dust (IP65 class) Several models available Diecast polyester or aluminium enclosure, fully insulated and corrosionresistant Ex certified versions

For gear boxes, compressors, pumps and fans. Compact piezoelectric accelerometer with attached electronics, for use over an extended temperature range.

GSI 124 galvanic separation unit

Power supply for 2-wire transmission systems installed in potentially explosive environments AC signal transmission over long distances (1000 m) Galvanic separation, 4 kVRMS High rejection of frame voltage DIN-rail mounting Ex certified versions

CE 311

50A/g (40g) -55 to 125oC 2 to 8000 Hz

Softline, armored

For heavy duty gas and steam turbines. Piezoelectric accelerometer with built-in electronics, for use in industrial environments.

CE 680

100mV/g (80g) -55 to 120oC 0.5 to 9000 Hz

EC 319 - softline

JB 116 (JB 105)

For auxiliary machines. Multi-purpose, compact piezoelectric accelerometer with built-in electronics, for use in industrial environments.

K2xx

2-wire transmission

SE 120

2 mA/g (4g) 0 to 75oC 0.2 to 750 Hz

Softline

For slow speed rotating machines, hydro turbines and fans. High-sensitivity piezoresistive accelerometer.
MI = Mineral integral Certified products versions for use in potentially explosive atmospheres are available. 4 5

Dynamic pressure sensors for combustion monitoring

Transducer Cable Ext. cable Conditioner Cable Galvanic separation

CP 103

232pC/bar (20 bar) Overload up to 250 bar -196 to 700 C 2 to 10000 Hz

K2xx
o

MI

EC 153

Softline IPC 704 in ABA 150

GSI 124

2-wire transmission

Very high temperature dynamic pressure sensor. Similar parts are standard with numerous OEMs.

CP 235

750pC/bar (20 bar) Overload up to 100 bar -55 to 520oC 2 to 10000 Hz

MI, overbraided 3 x IPC 704 in ABA 151

GSI 124 galvanic separation unit

Power supply for 2-wire transmission systems installed in potentially explosive environments AC signal transmission over long distances (1000 m) Galvanic separation, 4 kVRMS High rejection of frame voltage

High temperature, very high sensitivity dynamic pressure sensor. Similar parts are standard with numerous OEMs.

CP 211

25pC/bar (250 bar) Overload up to 350 bar -196 to 777oC 2 to 15000 Hz Very high temperature, compact dynamic pressure sensor. Mostly used for laboratory measurements in extreme environments.
MI

DIN-rail mounting Ex certified versions

EC 119 (390)

Softline, armored

6 x IPC 704 in ABA 153

IPC 704 conditioners

Signal conditioner for CA and CP sensors

CP 216

200pC/bar (250 bar) Overload up to 350 bar -70 to 520oC 2 to 15000 Hz

MI

Configurable high and lowpass filters. Freq. range 0.5 Hz to 20 kHz Optional integrator for a velocity signal output Optional 2-wire current or 3-wire voltage transmission Ex certified versions

High temperature, compact dynamic pressure sensor. Similar parts are standard with numerous OEMs.
MI = Mineral integral Certified products versions for use in potentially explosive atmospheres are available. 6 7

Proximity probes for all displacement measurements

Transducer Cable Junction box / protection Conditioner Cable Galvanic separation

TQ 401

8 mV/m or 2.5 A/m (2 mm range) -40 to 180oC 5mm tip

IQS 45x in ABA 150 K2xx (3xx) GSI 124 Softline Softline

8 mV/m or 2.5 A/m (2 mm range)

2 or 3-wire transmission Softline SG 101 (102) Movable, armored

TQ 402

4 mV/m or 1.25 A/m (4 mm range) -40 to 180oC 8.2mm tip

TQ 422

4 mV/m or 1.25 A/m (4 mm range) -25 to 140oC 12.7mm tip Pressure proof, 100 bar (tip)
KS 107 Softline Flexible conduit 3 x IQS 45x in ABA 151

GSV 14x

4 mV/m or 1.25 A/m (4 mm range)

JB 118 Softline

TQ 432

-25 to 140 C 12.7mm tip Pressure proof, 100 bar (tip) Reverse mount

EA 401 (402, 403)

GSI 124 advantages:

PA 151

8 mV/m or 2.5 A/m (2 mm range)

See p. 7

TQ 412

4 mV/m or 1.25 A/m (4 mm range) -40 to 180oC 8.2mm tip Reverse mount

Probe adaptor

GSV 14x safety barriers

Power supply for 3-wire transmission systems installed in potentially explosive environments Wide input voltage range
Softline

EA 401 (402, 403)

6 x IQS 45x in ABA 153

TQ 403

1.33 mV/m or 0.417 A/m (12 mm range) -40 to 180oC 18mm tip Displacement range from 0.2 to 12mm. For measuring relative vibration, axial thrust, differential expansion, and phase reference on turbomachinery. Transmission distances over 1000 m. Various body lengths and tip diameters are standard. High pressure versions, reversible mounting, armoured cable protection and probe adapters are available. These products are compliant with API 670 standards.

Ex certified versions

IQS 45x conditioners

Signal conditioner matched with TQ4xx probes Optional 2-wire current or 3-wire voltage transmission Diecast aluminium enclosure Ex certified versions

1.33 mV/m or 0.417 A/m (12 mm range)

TQ 423

-25 to 140oC 25 mm tip Pressure proof, 100 bar (tip)

Softline

All softline cables can be delivered in armored version. 8 9

Velocity sensors
Transducer Ext. cable Junction box Conditioner
IVC 632 in ABA 150 ED 109 - softline (112 - armored) K2xx (3xx)

Cable

Controller

50 mV / mm/s 50 A/ mm/s

CV 210

(50 mm/s) -40 to 100oC 1 to 400 Hz

2 or 3-wire transmission

For hydroelectric generators. Low-speed velocity transducer, with stainless steel body, ideal for moist or corrosive environments.

20 mV / mm/s

ED 120 - softline

IVC 632 conditioner

Signal conditioner for CV 210 velocity sensor Includes low-frequency compensation. Operates as low as 1 Hz (-3 dB) Optional 2-wire current or 3-wire voltage transmission 2-wire transmission over long distances (1000 m)

CV 213

(1000 mm/s) -29 to 204oC 10 to 1000 Hz

CV 214

20 mV / mm/s (1000 mm/s) -29 to 121oC 10 to 1000 Hz For hydro and steam turbines. Low-speed velocity transducers, resistant to dust and moisture (IP64).

ED 121 - softline

Diecast aluminium enclosure

ILS 730 conditioner

Signal conditioner for LS air gap transducer Three voltage-based outputs (Pole Profile, Rotor Profile, Min. Gap). One selectable 4-20 mA output (factory setting)
EC 119 - softline, armored

Ice detection system

0.2 to 2 mm ice

Diecast aluminium enclosure

K2xx

DIC 413

EW 140

-55 to 120 C
2-wire transmission

For all gas turbines. Detects initiation of ice on gas turbine inlets. Used by turbine de-icing systems, to optimize the use of bleed air.

JB 116 (105) ILS 730 in ABA 151

Air gap monitoring system

K509 (709)

LS 120
10

2 to 33 mm -15 to 125oC

For large hydroelectric generators. Monitors the air gap between the rotor and stator.
Certified products versions for use in potentially explosive atmospheres are available. 11

Complete monitoring solutions

One source
Request a complete solution from Vibro-Meter! In our Fribourg headquarters (Switzerland), more than 550 employees combine their expertise and commitment to designing and building all parts of your system: Sensors for harsh environments (measuring vibration, dynamic pressure, displacement, blade tip clearance...), high performance monitoring systems and software. Our sales and support network delivers outstanding service worldwide.

Plant asset management

Reduces the risk of failures and downtimes, enables maintenance to be planned, increase global plant effectiveness

Plant asset management system

VM600
Protection, condition & performance monitoring

Turbine health management system

Turbine health management

Safety, return on assets and environment impact

Blade tip clearance efficiency optimization

Up to 900C Microwave sensors

Structural damages combustion humming, outer segments

Up to 700C Dynamic pressure sensors Piezoelectric accelerometers

Bearing defect detection

Piezoelectric accelerometers Proximity probes

Up to 260C / 180C

Turbomachinery operation
Safety, maintenance optimization, lower spare parts inventory, improved efficiency, reduced emissions
12
Combustor

Turbine

Compressor

Generator

Standard

High

Very high

Case studies
Heavy duty gas turbine: Siemens SGT5-4000F Combustion and vibration monitoring (CP and CA sensors, with VM600) Balance-of-plant: Yonghung Thermal Power Plant (South Korea) Proximity, displacement and vibration monitoring (TQ and CE sensors, with VM600)

The SGT5-4000F (V94.3A) dry-low NOX Gas Turbine (GT) is one of the most powerful in operation, designed for large-scale applications with more than 280 MW ISO output. Vibro-Meter is the exclusive supplier of protection & monitoring equipment for this GT, Siemens proven workhorse, with more than three hundred units in operation worldwide. One of the major industrial challenges with heavyduty GTs is to combine the highest possible efficiency with extremely low NOX emissions and low combustion temperatures. Measuring the dynamic pressure at different locations in the combustor is a proven way to control combustion. Thus, pulsation monitoring systems are essential both during the GT tuning and operation. The sensors and monitoring equipment provided by Vibro-Meter allow Siemens to control combustion parameters such as fuel injection, which leads to extremely low emissions, reduced fuel consumption and long intervals between major inspections. Our sensing and monitoring systems on the SGT5-4000F include extreme temperature dynamic pressure sensors (CP 216), high sensitivity piezoelectric accelerometers (CA 201 and CA 901) and protection and monitoring systems (VM 600).

Vibro-Meter is proud to have contributed to making the SGT5-4000F one of the most efficient available for power generation applications.

Yonghung is the largest coal fired power plant in south Korea. Each 870 MW supercritical unit is designed for variable pressure operation at 3600 RPM and 560 C. Yonghung is designed with the philosophy of preserving the environment using a two stage combustion with low-NOX burners followed by selective catalytic reduction. To ensure efficient plant operation and to achieve their environmental objectives, Yonghung TPP (units 3 & 4) has 22 VM600 protection and condition monitoring systems, managing over 400 dynamic measurement points per unit. These sensors systems are provided by Vibro-Meter to secure and monitor a variety of machines for the steam turbine and the balance-of-plant in Yonghung. These include: BFP (Boiler Feed water Pump) Turbine, BFP Motor, Forced Daft Fans, Primary Air Fans, Condensate Pumps (Booster and Water), blowers and air compressors. At Yonghung TPP, Vibro-Meters highly reliable sensors for harsh environments measure a range of vibration and displacement characteristics. Proximity probes (TQ 402) and

piezoelectric accelerometers (CE 680) measure shaft position, relative shaft vibration (x-y), rotational speed of shaft and bearing broadband absolute vibration. Furthermore, VibroMeter sensors on the primary air fan enable the pre-heater system to use hot air to remove moisture from coal before the combustion process, which reduces NOX emissions. The VM 600 protection & condition monitoring systems then processes the signals, and provide an overall data overview: this is necessary to maintain an efficient plant operation through diagnostics and plant health management.

SGT5-4000F (copyright Siemens AG)

Yonghung TPP (courtesy of Vibro Korea)

Hydro turbine-generator: Cahora Bassa Hydro Power Plant (Mozambique) Air gap and vibration monitoring (VM600 with CE, LS, SE and TQ sensors)
The Cahora Bassa dam on the Zambezi river was completed in 1975 and renovated in 2003; its plant comprises 5 Francis turbines, with a total power of 2.1 GW. Within the renovation project, Alstom selected Vibro-Meter to provide machinery vibration, generator air gap, with a networked Protection and Condition Monitoring System. Condition monitoring of hydroelectric generators is critically important, especially the monitoring of the distance between the rotor poles and the stator walls, called air gap. To increase efficiency in generators, the air gap is reduced to a minimum. However, both the stator and the rotor on large hydroelectric machines can be quite flexible and their shape and location are affected in operation by centrifugal, thermal, and magnetic forces. This means that the air gap can only be effectively measured whilst the generator is in service. In the absence of effective monitoring, efficiency would decrease and potential machine damage could occur. In Cahora Bassa, each generator is equipped with a capacitive air gap measurement system (4x LS 120 sensors with ILS 730 conditioners). This on-line system is used when the machine is rotating and withstands the extremely high magnetic fields in the air gap. Furthermore, each turbo generator has piezoresistive, low-noise low-frequency SE 120 accelerometers, to measure the bearings absolute vibrations. On rotating parts, the relative shaft vibration is performed by the Eddy Current TQ 402 proximity probes. And the stators structural vibrations are monitored with compact piezoelectric accelerometers (CE 680). Coupled with our sensors, the VM600 protection & condition monitoring systems ensures the highest safety level during operation. Early detection of air gap anomalies using the equipment provided by Vibro-Meter enables condition monitoring of Cahora Bassa hydroelectric generators. As a result, plant efficiency is optimized, generator damage can be avoided and operators can more efficiently predict and plan maintenance outages.
Cahora Bassa HPP (courtesy of Hidroelectrica de Cahora Bassa)

13

14

Our expertise
Engineering
Thanks to its experienced engineers and experts, Vibro-Meters R&D department provides our customers with the latest technology in sensing systems for turbomachinery, often used in harsh environments. Vibro-Meter has ongoing collaborations with several renowned universities and institutes of technology. As a result of our continuous innovative effort, we own a range of patents, guaranteeing the uniqueness of our technology and know-how. We maintain our cutting edge by using modern tools, in-house developed software and top-notch simulation and design software such as Matlab, Simulink, Cadence, Allegro and Solidworks among others.

Manufacturing
Vibro-Meters large and modern manufacturing facility in Fribourg (Switzerland) is designed to ensure the highest quality standards and organized to efficiently produce large scale orders as well as small batches. Already in the 80s, we introduced our first Production Planning System, to reach high quality and productivity objectives. Sensors are manufactured from a large number of miniature, precisely-machined parts. Our experts use CNC-based equipment for precision machining, vacuum annealing, vacuum welding, argon arc welding and electron beam welding, among other techniques. To produce our electronic sub-assemblies, we invested into fullyprogrammable SMD assembly lines and automatic visual inspection equipment. As a 21st century high-tech international organization, we are concentrating on strategic manufacturing processes, with the aim of increasing added value, from the point of view of the customer.

Quality management
The quality and reliability of Vibro-Meters products have been widely recognized by customers for many years. Following our entry into the aviation sector in the 70s, a Quality System was put in place so that we could be certified by the associated customers and certifying bodies. Vibro-Meter was first certified ISO9000 in1995 and has been recertified regularly since then. Our latest BS EN ISO9001:2000 certification has been awarded in April 2007. Today, we have a very large team of experts working for quality assurance, ensuring the quality of engineering and software, the standardisation, the calibration of equipment, qualification tests and certification. Our quality policy applies to everything we undertake. All employees strive to consistently develop, maintain and improve our quality management system at every opportunity. External as well as internal customers are the focus of everything we do.

15

Since its foundation in 1952, Vibro-Meter in Fribourg (Switzerland) has been supplying reliable, high quality instrumentation for aviation and industrial customers worldwide. Vibro-Meter has been part of the Meggitt group since 1998. With its headquarters in the United Kingdom, Meggitt PLC is an international group of companies specialising in aerospace equipment, high performance sensing systems and defence. Vibro-Meters quality policy is fundamental to its success. The excellent reputation of our company is built on our dedication to fulfil our customers needs, our continuous investment in technical innovation and the skills and experience of our staff. We develop and supply engine monitoring units for new airliners produced by all leading aircraft manufacturers. For more than 30 years, our aerospace division has been the leading supplier of vibration and pressure monitoring systems for aircraft engines. The power generation industry widely uses the complete monitoring solutions for turbomachinery offered by our Energy division. Our integrated systems are adopted by major manufacturers of gas turbines, steam turbines and water turbines. Our international network of subsidiaries and distributors delivers outstanding support worldwide, for both our aerospace and power industry customers.
Vibro-Meter SA
Route de Moncor 4 PO Box CH - 1701 Fribourg Switzerland Tel: +41 (0)26 407 11 11 Fax: +41 (0)26 407 13 01 [email protected]

Vibro-Meter

www.vibro-meter.com www.meggitt.com

All information in this brochure is Vibro-Meter SA and is subject to modification without previous notice. Version 2.0 - 04.2009

www.appycommunications.com - 04.2009