www.honeywell.

com/sensing 1
Speed and reliability. Honeywell S&C offers electronic speed
and position sensors designed for enhanced reliability and an
extended life. Honeywell uses multiple technologies to detect
a change in magnetic eld and create an electronic signal for
control system interface. These technologies offer the ability to
detect speed, direction, or position of a moving ferrous metal or
magnetic target. Sensing is accomplished without contacting the
target, and there are no moving parts. This eliminates mechanical
FEATURES
SPEED AND DIRECTION SENSORS
1GT Series.
Features: Fast operating speed Reverse
polarity and transient protection EMI
resistant Wide continuous operating
temperature range Probe-style package
Enhanced low speed performance
Output amplitude not dependent on RPM
Benefts: Sealed in probe-style package
for physical protection and cost-effective
installation. Sensor electronically self-
adjusts to slight variations in runout
and temperature, often simplifying
installation and maintenance. Circuit
senses movement of targets in camshaft
and crankshaft speed and position,
transmission speed, and tachometer
applications, as well as anti-skid and
traction control applications.
LCZ Series.
Features: Stainless steel package Low
cost Omni-directional sensor to target
orientation Low power consumption
Small size Zero speed Digital output
Durable, cost-effective sensing solution
Screw-in-style package
Benefts: Available in several diameters
and lengths for application exibility.
Stainless steel package simple to install/
Speed Sensors
Line Guide
continued on page 5
adjust and does not require rotational
orientation. Potential applications include
harsh environment rotary applications
such as pumps, rollers, mixers, fan speed
measurement, transmission, spindles,
gear reducer RPM, synchronization,
compressor speed, and dyno testing,
plus industrial process control and factory
automation.
ZH10 Series.
Features: Aluminum package Low
cost Omni-directional sensor to target
orientation Low power consumption
Small size Zero speed Digital output
Durable, cost-effective sensing solution
Screw-in-style package
Benefts: Aluminum package simple
to install/adjust and does not require
rotational orientation. Potential
applications include harsh environment
rotary applications such as pumps,
rollers, mixers, fan speed measurement,
transmission, spindles, gear reducer
RPM, synchronization, compressor speed,
and dyno testing, plus industrial process
control and factory automation.
584XX Series.
Features: Senses moving ferrous metal
Output signal of integrated circuit allows
for direct use in digital equipment
Eliminates the need for interface
circuitry, reducing installation and
maintenance costs Enhanced stability
due to precisely-matched components
Extremely precise relationship between
the physical position of any sensed
object and the electrical signal produced
provides improved accuracy to timing
and positioning applications Enhanced
sensitivity
Benefts: Excellent resistance to
water, oil, shock and vibration damage
extends the product life and operating
reliability. A wide variety of supply
voltages allow for application exibility.
Allows for the reduction in noise,
often vital in potential positioning and
synchronization applications. Pre-leaded
or connector versions allow application
fexibility. Standard thread sizes improve
compatibility and interchangeability with
other standard types of speed sensors.
Potential applications include computing,
high-speed counting, positioning,
tachometry, synchronization, routing, fow
metering, machine control, engine, motor,
or pump RPM sensing, over/under speed
sensing, and wheel speed detection.
wear of the sensor or target. Honeywell offers a comprehensive
line-up of Hall-effect, magnetoresistive, and variable reluctance
sensors which provide electrical compatibility to most control
system interfaces. We also offer a variety of sensor package
types designed to enable mounting exibility and wire harness
interface compatibility. The Honeywell Speed and Position
portfolio has been developed to support potential transportation
and industrial customer application requirements.
2 www.honeywell.com/sensing
1GT Series
Description single Hall-effect sensor
Supply voltage range 4.5 Vdc to 26.5 Vdc (inclusive)
Supply current 20 mA
Output type digital sinking (open collector)
Operating frequency range 0 Hz to 25 kHz (inclusive)
Operating temperature range -40 C to 150 C [-40 F to 302 F]
LCZ Series ZH10 Series 584XX Series
Description
single Hall-effect zero
speed sensor
single Hall-effect zero
speed sensor
digital magnetic speed
sensor
Housing stainless steel aluminum stainless steel
Supply voltage range 4.5 Vdc to 26 Vdc 4 Vdc to 24 Vdc 5 Vdc to 30 Vdc
Supply current 20 mA 6 mA 15 mA
Output type digital sinking digital sinking square wave
Operating frequency range 0 Hz to 15 kHz 0 Hz to 15 kHz -
Operating temperature range
-40 C to 125 C
[-40 F to 257 F]
-40 C to 125 C
[-40 F to 257 F]
-40 C to 107 C
[-40 F to 225 F]
Speed. And customization.
From speedometer input,
engine timing, and transmission
input and output, to traction
and chassis control, wheel
speed systems, and RPM
indication, plus industrial
process control, Honeywell
S&C offers unmatched
engineering expertise. Which
also makes us the leader in
speed and direction sensor
customization. Our internal
design capabilities can
incorporate magnetic modeling
and mold fow-modeling
services into unique and
tailored product development
for solutions other
companies simply cant match.
Its another beneft you expect
from Honeywell S&C, the parts
and performance leader:
true solid state; extended life
(30 billion operations in key-
board module test programs);
high-speed operation (over
100 kHz possible); operates
with stationary input (zero
speed); logic-compatible input
and output; broad temperature
range (-40 C to 150 C,
-40 F to 302 F); highly
repeatable operation.
Speed Sensors Line Guide
Speed and
Direction Sensors
Speed and
Direction Sensors
www.honeywell.com/sensing 3
SNDH-T Series SNDH-H Series
Description
dual differential Hall-effect quadrature speed and direction
sensor
Hall-effect speed sensor
Housing n/a stainless steel or plastic
Supply voltage range 4.5 Vdc to 18 Vdc 4 Vdc to 24 Vdc (inclusive)
Supply current 18 mA max. 20 mA max.
Output type square wave digital sinking
Operating frequency range 1 Hz to 15 kHz 0 Hz to 15 kHz, 2 Hz to 15 Hz
Operating temperature range -40 C to 150 C [-40 F to 302 F] -40 C to 150 C [-40 F to 302 F]
GTN Series SNDJ Series
Description single Hall-effect sensor
zero speed Hall-effect sensor,
differential Hall-effect sensor,
dual Hall-effect sensor
Supply voltage range 8 Vdc to 32 Vdc (inclusive) 8 Vdc to 32 Vdc (inclusive)
Supply current 40 mA 10 mA to 20 mA max. (inclusive)
Output type digital sinking (open collector)
square wave and one direction signal,
square wave signal from NPN output transistor with 2.7 kOhm
pull-up, dc-coupled to supply,
square wave signal from push-pull stage, dc-coupled to supply
Operating frequency range 2 Hz to 9 kHz 0 Hz to 15 kHz (inclusive)
Operating temperature range -40 C to 125 C [-40 F to 257 F] -20 C to 100 C [-4 F to 212 F]
Speed and
Direction Sensors
Speed and
Direction Sensors
4 www.honeywell.com/sensing
VRS High Output Series VRS High Resolution Series
Output voltage range 8 Vp-p to 190 Vp-p (inclusive) 17 Vp-p to 170 Vp-p
Housing diameter 5/8 in, 3/8 in 5/8 in, 3/8 in
Housing material/style stainless steel threaded or smooth stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -55 C to 150 C [-67 F to 300 F] (inclusive) -55 C to 120 C [-67 F to 250 F]
Passive Speed
Sensors
Speed Sensors Line Guide
VRS General Purpose Series VRS Hazardous Location Series
Output voltage range 8 Vp-p to 40 Vp-p (inclusive) 30 Vp-p to 60 Vp-p (inclusive)
Housing diameter 5/8 in, 3/8 in, 1/4 in, 10/32 in 3/4 in, 5/8 in
Housing material/style stainless steel threaded or smooth stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -55 C to 120 C [-67 F to 250 F] (inclusive) -73 C to 120 C [-100 F to 250 F] (inclusive)
Passive Speed
Sensors
VRS High Temperature Series VRS Power Output Series
Output voltage range 4.7 Vp-p to 125 Vp-p (inclusive) 70 Vp-p (inclusive)
Housing diameter 5/8 in, 3/8 in, 1/4 in 5/8 in
Housing material and style stainless steel threaded stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -73 C to 230 C [-100 F to 450 F] (inclusive) -55 C to 120 C [-67 F to 250 F]
Passive Speed
Sensors
www.honeywell.com/sensing 5
SNDH-T Series.
Features: Advanced performance
dynamic offset self calibration Short
circuit and reverse voltage protection
Air gap up to 2 mm [0.08 in] Low jitter
output Near zero speed EMI hardened
High frequency switching capability
Multiple connector options including wire
harness and integral connector versions
using AMP super seal or AMP Jr.
Probe-style package Integrated circuit
packaging provides output phase shift
tolerancing with enhanced accuracy
Benefts: Provides speed and direction
information using quadrature output with
signals 90 degree phase shifted from each
other. BiCMOS Hall-effect technology,
using advanced digital signal processing
for dynamic off-set cancellation, designed
to provide enhanced air gap performance
and phase shift accuracy over most
conditions. Package design includes
O-ring seal for pressure applications and a
fxed mounting fange. Robust, automotive
under-the-hood grade packaging for
most environmental conditions as well
as EMI hardened. Designed for potential
applications where extremely high
resolution is required at wide frequency
ranges, and large air gaps.
SNDH-H Series.
Features: Hall-effect magnetic sensing
technology Digital current sinking output
(open collector) Advanced performance
dynamic offset self-calibration Air gap up
to 2,5 mm [0.098 in] Zero speed versions
High frequency switching capability (0
Hz to 15 kHz) -40 C to 150 C [-40 F to
302 F] operating temperature capability
Multiple connector options O-ring seal
Benefts: Use a magnetically biased
Hall-effect integrated circuit to accurately
sense movement of ferrous metal targets.
The specially designed IC (integrated
circuit) and a permanent magnet are
sealed in rugged, probe-type packages.
The ux density of the permanent magnet
alters when approached by ferrous metal
and is detected by the Hall ICs. If the
sensor is positioned at the circumference
of a revolving gear wheel, for example,
it detects the teeth and tooth spaces,
supplying a digital pulse output with
frequency proportional to gear wheel
speed. Potential applications include
tachometers/counters, speed of gears and
shafts in transmissions, hydraulic motors,
pumps, and gear boxes fow meters/
turbines, and engine RPM.
GTN Series.
Features: Choice of barrel lengths
Integrated electronic diagnostics
Enhanced operating speed EMI
resistant Reverse polarity and transient
protection Wide continuous operating
temperature range Probe-style package
Enhanced low speed performance
Output amplitude not dependent on RPM
Benefts: Sealed in probe-style package
for physical protection and cost-effective
installation. Sensor electronically self-
adjusts to slight variations in runout and
temperature, often simplifying installation
and maintenance. Integrated electronic
diagnostics feature detects open or short
circuits in power supply line by monitoring
sensor levels output. Circuit senses
movement of ferrous metal targets in
potential camshaft and crankshaft speed
and position, transmission speed, and
tachometer applications, as well as anti-
skid and traction control applications.
SNDJ Series.
Features: Three housing styles Three
different outputs Backbiased Hall-effect
sensor Direct sensing of ferrous metal
target Zero speed sensing capabilities
(some listings) Stainless steel housing
Probe- and screw-in-style packages
Rotational orientation independent of
sensor function
Benefts: Used with ferromagnetic
gears or pole wheel to generate impulse
frequencies proportional to target speed.
Rugged stainless steel housing for
potential applications found in high speed
gear tooth sensing, over-speed detection,
and rotary gear or shaft position detection
applications.
PASSIVE SPEED SENSORS
VRS General Purpose Series,
VRS Hazardous Location Series,
VRS High Output Series, VRS
High Resolution Series, VRS High
Temperature Series, VRS Power
Output Series.
Features: Self-powered operation
Simple installation No moving parts
Operates over wide speed range Often
adaptable to wide variety of congurations
Customized versions for unique speed
sensing applications
Benefts: All: Direct conversion of
actuator speed to output frequency. VRS
General Purpose Series, VRS Hazardous
Location Series: Simple, rugged devices
do not require external voltage source
for operation. VRS High Output Series:
Performs best at low to medium speeds
with medium to high impedance loads.
Sealed front-end versions available for
use where sensor is exposed to uids,
lubricants, or adverse environmental
conditions. VRS High Resolution Series:
Proper sensor alignment is required. VRS
High Temperature Series: Sealed front-end
versions for potential applications where
sensor is exposed to uids, lubricants, or
adverse environmental conditions.
Potential applications: VRS General
Purpose Series: Engine and motor RPM,
process, fow, wheel-slip, and gear speed
measurement with medium to high speeds
or in electrically noisy environments with
relatively small air gaps. VRS Hazardous
Location Series: Engine and motor RPM,
process, fow, wheel-slip, and gear speed
measurement where explosion-proof or
intrinsically safe sensors are required.
VRS High Output Series: Engine and
motor RPM, process, fow, wheel-slip,
and gear speed measurement where
higher output voltages are needed. VRS
High Resolution Series: Engine and motor
RPM, process, fow, wheel-slip, and gear
speed measurement where precise timing
pulse is required, and/or fne pitch gears
are used. VRS High Temperature Series:
Engine and motor RPM, process, fow,
wheel-slip, and gear speed measurement
where sensor is exposed to temperatures
up to 260 C [450 F]. VRS Power Output
Series: Driving low resistance loads at
large air gaps in engine and motor RPM,
process, fow, wheel-slip, and gear speed
measurement where larger actuators may
be used.
6 www.honeywell.com/sensing
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
005893-2-EN IL50 GLO
February 2012
Copyright 2012 Honeywell International Inc. All rights reserved.
Warranty. Honeywell warrants goods of
its manufacture as being free of defective
materials and faulty workmanship.
Honeywells standard product warranty
applies unless agreed to otherwise by
Honeywell in writing; please refer to your
order acknowledgement or consult your
local sales ofce for specic warranty
details. If warranted goods are returned to
Honeywell during the period of coverage,
Honeywell will repair or replace, at its
option, without charge those items it nds
defective. The foregoing is buyers sole
remedy and is in lieu of all warranties,
expressed or implied, including those
of merchantability and ftness for a
particular purpose. In no event shall
Honeywell be liable for consequential,
special, or indirect damages.
While we provide application assistance
personally, through our literature and
the Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
Specications may change without notice.
The information we supply is believed to
be accurate and reliable as of this printing.
However, we assume no responsibility for
its use.
For more information about Sensing and
Control products, visit www.honeywell.
com/sensing or call +1-815-235-6847
Email inquiries to [email protected]