Motor Ys11
Motor Ys11
Motor Ys11
Construction: YS11 is constructed with simple design and based on the well known thermostat technology of Sensata Technologies. And it has enough sealing capability to withstand varnish process and reinforced case enabled to be laced on winding.
7.Movable Arm carries current from 1.Lead to 9.Lower Terminal which is insert molded in 6.Lower Block, via 10.Movable Contact and Stationary Contact. 7.Movable Arm, 8.Bimetal Disc and 5.Upper Plate are riveted to secure with 6.Lower Block by 4.Eyelet. This assembly is inserted into 3.Case, and potting Epoxy to seal. Since trip time to cut off the power is depending on the operation temperature of YS11 protector. Rating should be selected properly. With referring Performance curve, it can be enabled to select best one which is matching with Motor.
Specification:
Contact Capacity : TCO,TMP TCO Ballast Temperature Range : -Motor Protector and Temp control -Ballast protection Tolerance on Open Temperature: Max. temp. of the switch head: Operating time: Pollution situation: Extent of sensing element: Degree of protection Electrical connections 7A/250Vac, 10A/125Vac 6A/24Vdc, 15A/18Vdc 2A/250Vac 45 to 150C 45 to 150C +/- 5K 150C continuous Dirty whole control IP00 soldering, welding
Certifications:
UL : ENEC : CQC: E15962 for Motor Protector E34618 for Temp Indicating & Regulating 2014531.17 for thermal cut-out, -motor and -ballast protector CQC02002001340/CQC02002001341 -Protectors are not applied in CCC(China Compulsory Certification) at present. So YS11 can not have CCC but CQC. CQC(China Quality Certification Centre) is a national certification body for appliance in China.
Dimension:
Standard type Case : Width 6.9 x Length 21.5 x Height 4.0mm excluding leads.
No Part Description Leads Epoxy Case Eyelet Upper Plate Lower Block Movable Arm Bimetal Disc Lower Terminal Stationary Contact Brass AgNi alloy PBT or PPS Brass Brass PBT Refer Numbering System Material Refer Numbering System
Performance
Short time trip performance and Ultimate trip current as reference.
Short Time Trip - YS11A (C17530)
Current(A)
70
40
30
20
10
0 100 10 1
Trip Time(sec)
10
1 60 50 40 30 20 10 0
DELTA T (degC)
U.T.C (A)
Numbering System
It is clearly defined the numbering system to find what user needs to know as follows.
(V) : Other options Omitt : No option R: Reinforced Case S: PPS Case T: Groove contact(For DC rating only) U: Groove contact and CDA C19220 for lower terminal(For DC rating ZW(ZZZ): Optional Leads material, length and else. Z : Leads material can be selected from table below as standard rating, A : UL style 3266 AWG22 Tin coated-BL B : UL style 1430 AWG22-WH C : UL style 3398 AWG22 Tin coated-YL(Kurabe) D : UL style 3398 AWG22-YL(Kurabe) E : UL style 3266 AWG22-BK F : Copper Solid Wire D=0.8mm G : UL style 3266 AWG22 Tin coated-WH W : Leads length can be selected from Table below as standard rating. 5 m m S trip 10 m m S trip W L e ng th W L e ng th 1 25 11 25 2 30 12 30 3 35 13 35 4 40 14 40 5 45 15 45 6 50 16 50 7 55 17 55 8 60 18 60 9 65 19 65 10 70 20 70 (ZZZ) : Other than above standard combination, 2 or 3 digits of number or letter is assigned as customized one.
YYYT : Y Y Y : O pe n tem pe ra ture C ode T : C lose te m perature C ode Tem p erature C ode M a trix YYY T C lose ( ) *1 O p en C ode ( ) A B 45 >35 >35 45 *2 50 >35 >35 50 *2 55 >35 >35 55 *2 60 >35 >35 60 *2 65 >35 >35 65 *2 70 70 40 40 75 75 45 45 80 80 50 50 85 85 55 55 90 90 59 60 95 95 62 65 100 100 64 70 105 105 67 75 110 110 70 80 115 115 73 85 120 120 76 90 125 125 79 95 130 130 83 100 135 135 86 105 140 140 90 110 145 145 94 115 150 150 96 120 *1 C lose tem perature for reference *2 A is for S nap O p en/C lose guarantted. B is for sna p open guarantted.
Ex. YS11A130B-C7
YS11 with C17530 material Movable Arm. 130 open, 100 Close temperature. UL 3398 AWG22 55mm length leads