MVAJ Relay Manual Areva

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8
At a glance
Powered by AI
The document describes the wiring details and specifications of a module terminal block including its components, output contact connections, and mounting dimensions.

The module terminal block has terminals, a case earth, and connections for power (Vx) and reset. It can be front or rear mounted.

The output contacts are connected to specific module terminals depending on the contact combination and whether it is making or breaking the connection.

GRID

Left hand Note 1 (a)

Right hand
2 4 6 8 10 12 1 3 5 7 9 11 Combination of Output Contacts Combination 10M 9M 1B 2B 3B 4B 5B 6B 7B 8B 8M L. Hand 7 7 7 7 7 7 8 8 8 R. Hand 1 2 3 4 5 6 4 5 6

CT shorting links make before (b) & (c) disconnect Short terminals break before (c) Long terminals
RL2-A R4

14 16 A

(b) (c)

13 15 17 19 21 23

R1

RL1 10

(OP) R2

7M 6M 5M 4M 3M 2M

Case earth
1 3 5 7 9 11 13 15 17 19 21 23 25 27 2 4 6 8 10 12 14 16 18 20 22 24 26 28

RL2-B

Rear mounted facing rear viewed from front A RL1-A R3


RL2

Output Contacts to Module Terminals Contact Module terminals Stack L. hand 13 15 17 19 21 23 14 16 1 5 9 2 6 R. hand 3 7 11 4 8 1 M M M M M 2 M M M B M 3 B M M B M 4 B M M B B 5 B B M B B 6 B B M B B 7 M M M M 8 B B M B Contact Description M: Make B: Break

+
Vx

PR

27

10

12

M M M M M B

Module terminal block viewed from rear

28

Front mounted facing front viewed from front Left hand Right hand
A 13 15 17 19 C 2 4 6 8 10 12 1 3 5 7 9 11

Combination of Output Contacts Combination 8M 7M 6M 5M 4M 3M 2M 1M 1B 2B 3B 4B 5B 6B 7B 8B L. Hand 8 8 8 8 8 8 8 9 9 R. Hand 1 2 3 4 5 6 7 6 7

Case earth
1 3 5 7 9 11 13 15 17 19 21 23 25 27 2 4 6 8 10 12 14 16 18 20 22 24 26 28

Vx

+
PR 27 RL1-B RL2-A Reset 25 R1
RL1 8

(OP) 28 R2 (Reset) 26

RL1-C

RL1 8

Output Contacts to Module Terminals Contact Module terminals Stack L. hand 13 15 17 19 R. hand 1 3 5 7 9 11 2 4 1 M M M M 2 M M M B 3 B M M B 4 B M M B 5 B B M B 6 B B M B 7 B B B B 8 M M 9 B B Contact Description M: Make B: Break

Rear mounted facing rear viewed from front A

10

12

Module terminal block viewed from rear

RL1-B Note 1 (a)

R3
RL2

(t)

CT shorting links make before (b) & (c) disconnect Short terminals break before (c) Long terminals

M M M B B B B

M M M M M B B

(b) (c)

Case earth
1 3 5 7 9 11 13 15 17 19 21 23 25 27 2 4 6 8 10 12 14 16 18 20 22 24 26 28

Front mounted facing front viewed from front Left hand Right hand
14 16 A 13 15 17 19 21 23 2 4 6 8 10 12 1 3 5 7 9 11
Combination 10M 9M 8M 7M 6M 1B 2B 3B 4B 5B 6B 7B 8B

Table 1
Combination of Output Contacts L. Hand 7 7 7 7 7 7 8 8 8 R. Hand 1 2 3 4 5 6 4 5 6

RL1-A PR 27

R1

RL1 10

(OP)

5M 4M 3M 2M

Table 2

Vx
Module terminal block viewed from rear
Notes 1. (a)

Output Contacts to Module Terminals

28

CT shorting links make before (b) & (c) disconnect Short terminals break before (c) Long terminals

(b) (c)

2. Resistor fitted on 220/250V versions only 3. The numbers quoted for L. hand and R. hand stacks in table1 are code numbers used for cross references to module terminals in table 2

Contact Module terminals Stack 13 17 21 14 L. hand 15 19 23 16 R. hand 1 3 5 7 9 11 2 4 6 8 1 M M M M M 2 M M M B M 3 B M M B M 4 B M M B B 5 B B M B B 6 B B M B B 7 M M M M 8 B B M B Contact Description M: Make B: Break

10

12

M M M M M B

4 holes 4.4
45

13 23.5

168

159

Push button projection 10 max

48 Panel cut-out: Flush mounting fixing details 32 212 25 min.

177

157 max.

51

Flush mounting

All dimensions in mm

52 97 4 holes 4.4 23.5

All dimensions in mm. 168 159

Push button projection 10 max.

99 Panel cut-out: Flush mounting fixing details.

32

212

25 min.

177
Reset

157 max.

103

Flush mounting.

11

GRID

You might also like