Embedded System Design (BEE-446) : General-Purpose Processors (Software)

Embedded System Design (BEE-446)
BEE-446 2011
Winter in Islamabad 2011
Lecture #06
General-Purpose Processors (Software)

Muhammad Jameel <[email protected]>
Outline
Parallel Port Driver Example Application Specific Instruction Set Processors (ASIPs) Selecting a microporcessor
Embedded Systems Design: A Unified Hardware/Software Introduction, (c) 2000 Vahid/Givargis And Dr. Osman Hassan, Modified By : Jameel Nawaz Malik
Example: parallel port driver

LPT Connection Pin 1 2-9 10,11,12,13,15 14,16,17 I/O Direction Output Output Input Output Register Address 0th bit of register #2 0th bit of register #2 6,7,5,4,3th bit of register #1
Pin 13
PC Parallel port
Pin 2 LED
Switch
1,2,3th bit of register #2
Using assembly language programming we can configure a PC parallel port to perform digital I/O
parallel port monitors the input switch and turns the LED on/off accordingly
Parallel Port Example

; This program consists of a sub-routine that reads ; the state of the input pin, determining the on/off state ; of our switch and asserts the output pin, turning the LED ; on/off accordingly .386 CheckPort push push dx mov in and cmp jne SwitchOff: mov in and out jmp SwitchOn: mov in or out Done: pop pop CheckPort proc ax extern C CheckPort(void); // defined in // assembly void main(void) { while( 1 ) { CheckPort(); } }
; ; dx, 3BCh + 1 ; al, dx ; al, 10h ; al, 0 ; SwitchOn ;
save the content save the content base + 1 for register #1 read register #1 mask out all but bit # 4 is it 0? if not, we need to turn the LED on
Pin 13
PC Parallel port
Pin 2 LED
Switch
dx, 3BCh + 0 ; base + 0 for register #0 al, dx ; read the current state of the port al, f7h ; clear first bit (masking) dx, al ; write it out to the port Done ; we are done
LPT Connection Pin

dx, al, al, dx, 3BCh + 0 ; base + 0 for register #0 dx ; read the current state of the port 01h ; set first bit (masking) al ; write it out to the port ; restore the content ; restore the content
I/O Direction Output Output Input Output
Register Address 0th bit of register #2 0th bit of register #2 6,7,5,4,3th bit of register #1 1,2,3th bit of register #2
1 2-9 10,11,12,13,15
dx ax endp
14,16,17
Application-Specific Instruction-Set Processors (ASIPs)

General-Purpose Processors (GPPs)
Sometimes too general to be effective in demanding application
e.g., video processing requires huge video buffers and operations on large arrays of data, inefficient on a GPP
Single-Purpose Processor (SPP) has high NRE, not programmable
Application-Specific Instruction-Set Processors (ASIPs)

ASIPs targeted to a particular domain
Contain architectural features specific to that domain
e.g., embedded control, digital signal processing, video processing, network processing, telecommunications, etc.
Still programmable
A Common ASIP: Microcontroller

For embedded control applications
Reading sensors, setting actuators Mostly dealing with events (bits): data is present, but not in huge amounts e.g., VCR, disk drive, digital camera (assuming SPP for image compression), washing machine, microwave oven
Microcontroller features
On-chip peripherals
Timers, analog-digital converters, serial communication, etc. Tightly integrated for programmer, typically part of register space
On-chip program and data memory Direct programmer access to many of the chips pins Specialized instructions for bit-manipulation
Embedded Systems Design: A Unified Hardware/Software Introduction, (c) 2000 Vahid/Givargis And Dr. Osman Hassan, Modified By : Jameel Nawaz Malik 7
Another Common ASIP: Digital Signal Processors (DSP)

For signal processing applications
Large amounts of digitized data, often streaming Data transformations must be applied fast e.g., cell-phone voice filter, digital TV, music synthesizer
DSP features
Several instruction execution units Multiple-accumulate single-cycle instruction, other instrs. Efficient vector operations e.g., add two arrays
Trend: Even More Customized ASIPs

In the past, microprocessors were acquired as chips Today, we increasingly acquire a processor as Intellectual Property (IP)
e.g., synthesizable VHDL model
Opportunity to add a custom datapath hardware and a few custom instructions, or delete a few instructions
Can have significant performance, power and size impacts Problem: need compiler/debugger for customized ASIP
One solution: automatic compiler/debugger generation
e.g., www.tensillica.com
Selecting a Microprocessor
Issues
Technical: speed, power, size, cost Non-Technical: development environment, prior expertise, licensing, etc.
Speed: how evaluate a processors speed?

Clock speed but instructions per cycle may differ Instructions per second but work per instr. may differ Dhrystone: Synthetic benchmark, developed in 1984. Dhrystones/sec.
MIPS: 1 MIPS = 1757 Dhrystones per second (based on Digitals VAX 11/780). A.k.a. Dhrystone MIPS. Commonly used today.
So, 750 MIPS = 750*1757 = 1,317,750 Dhrystones per second
SPEC: set of more realistic benchmarks, but oriented to desktops EEMBC EDN Embedded Benchmark Consortium, www.eembc.org
Suites of benchmarks: automotive, consumer electronics, networking, office automation, telecommunications
Embedded Systems Design: A Unified Hardware/Software Introduction, (c) 2000 Vahid/Givargis And Dr. Osman Hassan, Modified By : Jameel Nawaz Malik 10
Selecting a Microprocessor
Dhrystone: Synthetic benchmark, developed in 1984. Dhrystones/sec.
http://www.roylongbottom.org.uk/
11
General Purpose Processors

Processor Intel PIII Clock speed 1GHz Periph. 2x16 K L1, 256K L2, MMX 2x32 K L1, 256K L2 2x32 K 2 way set assoc. None Bus Width MIPS General Purpose Processors 32 ~900 Power 97W Trans. ~7M Price $900
IBM PowerPC 750X MIPS R5000 StrongARM SA-110 Intel 8051 Motorola 68HC811
550 MHz
32/64
~1300
5W
~7M
$900
250 MHz 233 MHz
32/64 32
NA 268
NA 1W
3.6M 2.1M
NA NA
12 MHz 3 MHz
4K ROM, 128 RAM, 32 I/O, Timer, UART 4K ROM, 192 RAM, 32 I/O, Timer, WDT, SPI 128K, SRAM, 3 T1 Ports, DMA, 13 ADC, 9 DAC 16K Inst., 2K Data, Serial Ports, DMA
8 8
Microcontroller ~1 ~.5
~0.2W ~0.1W
~10K ~10K
$7 $5
TI C5416
160 MHz
Digital Signal Processors 16/32 ~600
NA
NA
$34
Lucent DSP32C
80 MHz
32
40
NA
NA
$75
Sources: Intel, Motorola, MIPS, ARM, TI, and IBM Website/Datasheet; Embedded Systems Programming, Nov. 1998
12

Embedded System Design (BEE-446) : General-Purpose Processors (Software)

Uploaded by

Copyright:

Available Formats

Embedded System Design (BEE-446) : General-Purpose Processors (Software)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Embedded System Design (BEE-446) : General-Purpose Processors (Software)

Uploaded by

Copyright:

Available Formats

Embedded System Design (BEE-446)

Winter in Islamabad 2011

General-Purpose Processors (Software)

Example: parallel port driver

1,2,3th bit of register #2

Parallel Port Example

; ; dx, 3BCh + 1 ; al, dx ; al, 10h ; al, 0 ; SwitchOn ;

LPT Connection Pin

I/O Direction Output Output Input Output

Application-Specific Instruction-Set Processors (ASIPs)

Single-Purpose Processor (SPP) has high NRE, not programmable

Application-Specific Instruction-Set Processors (ASIPs)

A Common ASIP: Microcontroller

Another Common ASIP: Digital Signal Processors (DSP)

Trend: Even More Customized ASIPs

Speed: how evaluate a processors speed?

General Purpose Processors

250 MHz 233 MHz

Digital Signal Processors 16/32 ~600

You might also like