Scribd Logo
Upload

Welcome to Scribd!

  • 125 views

    Microwave

    Uploaded by

    ragh1291
    This document contains the question bank for the subject EC1403 Microwave Engineering. It is divided into 5 units covering various topics in microwave network theory, passive devices, vacuum tube devices, solid state devices and circuits, and microwave measurements. The question bank contains short answer questions worth 2 marks each and longer answer questions worth 16 marks each. The questions assess students' understanding of key microwave engineering concepts through calculations, derivations, and explanations with diagrams.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Microwave

    Uploaded by

    ragh1291
    125 views5 pages
    This document contains the question bank for the subject EC1403 Microwave Engineering. It is divided into 5 units covering various topics in microwave network theory, passive devices, vacuum tube devices, solid state devices and circuits, and microwave measurements. The question bank contains short answer questions worth 2 marks each and longer answer questions worth 16 marks each. The questions assess students' understanding of key microwave engineering concepts through calculations, derivations, and explanations with diagrams.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the question bank for the subject EC1403 Microwave Engineering. It is divided into 5 units covering various topics in microwave network theory, passive devices, vacuum tube devices, solid state devices and circuits, and microwave measurements. The question bank contains short answer questions worth 2 marks each and longer answer questions worth 16 marks each. The questions assess students' understanding of key microwave engineering concepts through calculations, derivations, and explanations with diagrams.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    125 views5 pages

    Microwave

    Uploaded by

    ragh1291
    This document contains the question bank for the subject EC1403 Microwave Engineering. It is divided into 5 units covering various topics in microwave network theory, passive devices, vacuum tube devices, solid state devices and circuits, and microwave measurements. The question bank contains short answer questions worth 2 marks each and longer answer questions worth 16 marks each. The questions assess students' understanding of key microwave engineering concepts through calculations, derivations, and explanations with diagrams.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    EC1403 MICROWAVE ENGINEERING

    Sem / Year : VII / IV

    KINGS
    COLLEGE OF ENGINEERING

    DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

    QUESTION BANK
    SUBJECT CODE SUBJECT NAME : EC1403 UNIT I
    MICROWAVE NETWORK THEORY

    SEM / YEAR :

    VII/ IV

    : MICROWAVE ENGINEERING

    PART-A (2 Marks)
    1. Define junction? 2. State the properties of S matrix? 3. Compare [S], [Z] and [Y] matrices? 4. Give ABCD matrix for a two port network 5. What is ABCD matrix? 6. What are the advantages of ABCD matrix? 7. Define S-matrix? 8. What is the Scattering matrix for N port device? 9. Give the S matrix of uniform transmission line 10. Give the properties of impedance [x]&admittance[y] matrix?

    PART B (16 Marks)


    1. Derive the expression for S matrix representation of multi-port network 2. Explain about properties of S parameters 3. (a)Explain symmetrical Z and Y matrices for reciprocal network. (b)Comparison between [S],[Z] and [Y] matrices. pp.Express S parameter in terms of impedances. (16) (16) (8) (8) (16)

    4. Two transmission lines of characteristic impedance Z1 and Z2 are joined at plane

    Kings College of Engineering, Punalkulam

    EC1403 MICROWAVE ENGINEERING

    Sem / Year : VII / IV

    UNIT II MICROWAVE PASSIVE DEVICES


    PART-A (2 Marks)
    1. Difference between Isolator and Circulator? 2. Give the applications of directional coupler 3. What is the principle of Microwave phase shifter? 4. What are junctions? Give some examples 5. What is Tee junction? Give two examples 6. What is the other name for magic TEE? 7. Give the S-matrix of E-plane Tee. 8. Give the S-matrix of H-plane Tee 9. Give the S-matrix of Magic Tee 10. What is hybrid ring? 11. What is the other name for Hybrid ring? 12. Name some wave guide components used to change the direction of the guide 13. What are the different types of Directional coupler? 14. What are nonreciprocal devices? Give two examples 15. Give some coupling parameters of directional coupler?

    PART B (16 Marks)


    1. Derive the S-matrices for E-plane and H-plane tee? 2. Derive the S-matrices for magic tee? 3. Derive the S-matrices for Directional coupler? 4. (a)Explain about coaxial connector and adapter? (b)Explain the concept of waveguide corners bends and twists 5. (a) Explain in detail about Attenuator? (b) Explain the concept of phase shifters? 6. .Explain in detail about Isolator and Faraday rotation of Isolator? 7. Explain the concept of circulator and derive the s-matrices for Three port and four port circulator? (16) 8. A magic T is terminated at collinear ports 1 and 2 and difference port 4 by impedances of reflection coefficients 1=0.5, 2=0.6 and 4=0.8 respectively. If 1W power is fed at sum port 3, calculate the power reflected at port 3 and power transmitted to other three ports. find S- matrix
    Kings College of Engineering, Punalkulam

    (16) (16) (16) (8) (8) (8) (8) (16)

    (16) (16)

    9. A three port circulator has on insertion loss of 1 db, isolation 30 db and VSWR = 1.5

    EC1403 MICROWAVE ENGINEERING

    Sem / Year : VII / IV

    UNIT - III MICROWAVE VACCUM TUBE DEVICES


    PART-A (2 Marks)
    1. What are the assumptions for calculation of RF power in Reflex Klystron? 2. What is the condition for oscillation in Reflex klystron? 3. Give the drawbacks of klystron amplifiers. 4. What is the effect of transit time? 5. What are the applications of reflex klystron? 6. What is the purpose of slow wave structures used in TWT amplifiers? 7. How are spurious oscillations generated in TWT amplifier? State the method to Suppress it? 8. State the applications of TWT. 9. How the klystron amplifier can act as klystron oscillator? What are the Applications of klystron amplifier? 10. Define phase focusing effect. 11. What do you mean by O-type tubes? Name some O-type tubes. 12. Define Transit time in Reflex klystron. 13. Write the parameters on which bunching depend on? 14. Compare TWTA Klystron amplifier 15. Give the performance Specification of Reflex klystron? 16. What is CFA? State the applications of CFA. 17. State the characteristics of magnetron and of 2-cavity klystron amplifier. 18. What are the advantages of TWT? 19. State the applications of magnetrons. Why magnetron is called as cross filed Device?

    PART B (16 Marks)


    1. With neat circuit diagrams and relevant equations, explain the velocity modulation process and Bunching in a klystron amplifier? (16) 2. Derive the equation for power output and efficiency of two cavities and four cavity klystron Amplifiers. (16) 3. With neat diagrams and relevant equations, explain about helix Traveling wave tube. (16) 4. With neat diagram, explain about Magnetron (16)

    Kings College of Engineering, Punalkulam

    EC1403 MICROWAVE ENGINEERING

    Sem / Year : VII / IV

    UNIT IV MICROWAVE SOLID STATE DEVICES AND CIRCUITS


    PART-A (2 Marks)
    1. What are the applications of Tunnel Diode? 2. What are the elements that exhibit Gunn Effect? 3. What are the applications of Gunn Diode? 4. What is negative resistance? 5. What are the applications of backward diode? 6. Why is FETs preferred to bipolar transistor at high frequencies? 7. What is the main advantage of TRAPATT over IMPATT? 8. Define GUNN EFFECT. 9. What is MESFET? 10. Explain stable amplification mode. 11. What are the factors reducing efficiency of IMPATT diode? 12. What is negative resistance in Gunn diode? 13. What are the applications of GaAs MESFET? 14. What is Transferred electron effect? 15. List the type of circuit used for IMPATT diode circuits. 16 .What is Transferred electron effect? 17. What are time parameters for TED S? 18. What are the various modes of transferred electron oscillators?

    PART B (16 Marks)


    1. Explain in detail about Gunn diodes and modes of operation? 2. (a) Describe the conceptual view microwave diodes crystal diodes? (b) Explain the concept of schottky diode harmonic mixer? 3. Explain in detail about PIN diodes and its applications? 4. Describe the conceptual view of IMPATT diodes? 5. Explain in detail about tunnel diode amplifier? 6. Explain the concept of varactor diode? 7. Describe the conceptual view of VCO-parametric amplifier? 8. Explain in detail about microwave bipolar transistor? 9. Explain the concept of microwave unipolar transistor? 10. What is Transferred electron effect? Explain some of the TEDs? 11. Explain the operation of TRAPATT diode? (16) (8) (8) (16) (16) (16) (16) (16) (16) (16) (16) (16)

    Kings College of Engineering, Punalkulam

    EC1403 MICROWAVE ENGINEERING

    Sem / Year : VII / IV

    UNIT V
    MICROWAVE MEASUREMENTS

    PART-A (2 Marks)
    1. List some of power detecting elements? 2. What are microwave detectors? 3. Differentiate baretter and thermistor? 4. What are tunable detectors? 5. What is slotted section with line carriage? 6. What is the main purpose of slotted section with line carriage? 7. What is a VSWR meter? 8. What is Bolometer? 9. What is calorimeter? 10. Mention the disadvantages of single bridge circuit? 11. Define insertion loss? 12. How will you determine the VSWR and return loss in reflect meter method? 13 .List the different types of Impedance measurement methods? 14. How do you measure microwave frequency? 15. What is a wave meter? 16. Define dielectric constant? 17. How the S-parameter of a microwave circuit measured? 18. List the methods for measuring dielectric constants? 19. What is radiation pattern? 20. What is radiation efficiency? 21. How do you measure the polarization? 22. What is spectrum analyzer? 23. List the types of spectrum analyzer 24. List some application of spectrum analyzer. 25. What is network analyzer?

    PART B (16 Marks)


    1. Explain about the slotted line VSWR and Frequency meter. 3. Discuss in detail the power and impedance measurement using microwave devices 4. Write a brief note on insertion loss and attenuation measurements. 5. Explain in detail about the dielectric constant measurement of a solid using waveguide. 6. Explain in detail about spectrum analyzer? 7. Explain in detail about network analyzer 8. Explain the different types of Impedance measurement methods? 9. How do you measure microwave frequency? 10. Explain the power measuring devices baretter and thermistor? 11. Explain in detail power detecting elements? 12. Explain in detail about microwave detector? (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16)

    2. Explain in detail the measurement of VSWR through return loss measurements.(16)

    Kings College of Engineering, Punalkulam

    You might also like