Robotics Powerpoint Presentation

Robotics
Definition:
“A robot is a reprogrammable, multifunctional manipulator

designed to move material, parts, tools, or specialized devices
through variable programmed motions for the performance of
a variety of tasks.” (Robot Institute of America)
Alternate definition:
“A robot is a one-armed, blind idiot with limited memory

and which cannot speak, see, or hear.”
Ideal Tasks
Tasks which are:

– Dangerous
• Space exploration
• chemical spill cleanup
• disarming bombs
• disaster cleanup
– Boring and/or repetitive
• Welding car frames
• part pick and place
• manufacturing parts.
– High precision or high speed
• Electronics testing
• Surgery
• precision machining.
Automation vs. robots
• Automation –Machinery designed to carry out a specific task

– Bottling machine
– Dishwasher
– Paint sprayer
• Robots – machinery designed

to carry out a variety of tasks
– Pick and place arms
– Mobile robots
– Computer Numerical Control
machines
Types of robots
• Pick and place

– Moves items between points
• Continuous path control

– Moves along a programmable path
• Sensory
– Employs sensors for feedback
Pick and Place
• Moves items from one point to

another
• Does not need to follow a specific

path between points
• Uses include loading and

unloading machines, placing
components on circuit boards, and
moving parts off conveyor belts.
Continuous path control
• Moves along a specific path
• Uses include welding, cutting,

machining parts.
Sensory
• Uses sensors for feedback.
• Closed-loop robots use sensors in

conjunction with actuators to gain
higher accuracy – servo motors.
• Uses include mobile robotics,

telepresence, search and rescue, pick
and place with machine vision.
Measures of performance
• Working volume
– The space within which the robot operates.
– Larger volume costs more but can increase the capabilities of a
robot
• Speed and acceleration

– Faster speed often reduces resolution or increases cost
– Varies depending on position, load.
– Speed can be limited by the task the robot performs (welding,
cutting)
• Resolution
– Often a speed tradeoff
– The smallest step the robot can take
Performance (cont.)
• Accuracy
–The difference between the
actual position of the robot and
the programmed position
• Repeatability
Will the robot always return to the
same point under the same
control conditions?
Increased cost
Varies depending on position,

load
Control
•Open loop, i.e., no feedback, deterministic
•Closed loop, i.e., feedback, maybe a sense of

touch and/or vision
Kinematics and dynamics
• Degrees of freedom—number of independent motions
– Translation--3 independent directions

– Rotation-- 3 independent axes
– 2D motion = 3 degrees of freedom: 2 translation, 1 rotation
– 3D motion = 6 degrees of freedom: 3 translation, 3 rotation
Kinematics and dynamics (cont.)
• Actions
– Simple joints
• prismatic—sliding joint, e.g., square cylinder in square tube
• revolute—hinge joint
– Compound joints
• ball and socket = 3 revolute joints
• round cylinder in tube = 1 prismatic, 1 revolute
• Mobility
– Wheels
– multipedal (multi-legged with a sequence of actions)
Kinematics and dynamics (cont.)
• Work areas
– rectangular (x,y,z)
– cylindrical (r,,z)
x'
– spherical (r,,) x''
x
• Coordinates
– World coordinate frame
– End effector frame
– How to get from coordinate system x” to x’ to x
Transformations
• General coordinate transformation from x’ to x is x = Bx’ + p ,

where B is a rotation matrix and p is a translation vector
• More conveniently, one can create an augmented matrix

which allows the above equation to be expressed as x = A x’.
• Coordinate transformations of multilink systems are represented as
x0 = A01 A12A23. . .A(n-1)(n)xn

Dynamics
• Velocity, acceleration of end actuator

– power transmission
– actuator
• solenoid –two positions , e.g., in, out
• motor+gears, belts, screws, levers—continuum of positions
• stepper motor—range of positions in discrete increments
A 2-D “binary” robot segment
• Example of a 2D robotic link having three solenoids to

determine geometry. All members are linked by pin joints; members
A,B,C have two states—in, out—controlled by in-line solenoids.
Note that the geometry of such a link can be represented in terms of
three binary digits corresponding to the states of A,B,C, e.g., 010
represents A,C in, B out. Links can be chained together and
controlled by sets of three bit codes.
A B C A B C A B C A B C
A B C A B C A B C A B C
Problems
• Joint play, compounded through N joints
• Accelerating masses produce vibration, elastic deformations in links
• Torques, stresses transmitted depending on end actuator loads

Control and programming
• Position of end actuator

– multiple solutions
• Trajectory of end actuator: how to get from point A to B

– programming for coordinated motion of each link
– problem—sometimes no closed-form solution
Control and programming (cont.)
• Example: end actuator (tip) problem with no closed solution.

Two-segment arm with arm lengths L1 = L2, and stepper -motor control of
angles 1 and 2.
L2
2
y
L1
1
Problem: control 1 and 2 such that arm tip traverses its range at
constant height y, or with no more variation than y.
Geometry is easy: position of arm tip
x = L1 (cos 1 + cos 2)
y = L1 (sin 1 + sin 2)
• Arm tip moves by changing 1 and 2 as a function of time.

Therefore
x   L1 (sin 1 1  sin  2 2 )
y  L1 (cos 1 1  cos  2 2 )  0
So, as 1 and 2 are changed, x and y are affected.

cos 1
To satisfy y = constant, we must have  2  1
 
cos  2
. So the rates at which 1 and 2 are changed depend on the values of

1 and 2.
There is no closed-form solution to this problem. One must use

approximations, and accept some minor variations in y. Moving the arm tip
through its maximum range of x might have to be accomplished through a
sequence of program steps that define different rates of changing 1 and 2.
• Possible approaches:
– Program the rates of change of 1 and 2 for y = const. for initial values of
1 and 2 . When arm tip exceeds y, reprogram for new values of 1 and
2.
– Program the rates of change of 1 and 2 at the initial point and at some
other point for y = const. Take the average of these two rates, and hope
that y is not exceeded. If it is exceeded, reprogram for a shorter
distance. Continue program segments until the arm tip has traversed its
range.
•
– Program the rates of change of 1 and 2 at the initial point and

at some other point for y = const. Take the average of these two
rates, and hope that y is not exceeded. If it is exceeded,
reprogram for a shorter distance. Continue program segments
until the arm tip has traversed its range.
– The rate of change of 1 and 2 can be changed in a

programming segment, i.e., the rates of change need not be
uniform over time. This programming strategy incorporates
approaches 1) and 2). Start with rates of change for the initial
values of 1 and 2 , then add an acceleration component so that
y = const. will also be satisfied at a distant position.
Feedback control
• Rotation encoders
• Cameras
• Pressure sensors
• Temperature sensors
• Limit switches
• Optical sensors
• Sonar
New directions
• Haptics--tactile sensing
• Other kinematic mechanisms,

e.g. snake motion
• Robots that can learn

Robotics Powerpoint Presentation

Uploaded by

Copyright:

Available Formats

Robotics Powerpoint Presentation

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Robotics Powerpoint Presentation

Uploaded by

Copyright:

Available Formats

Robotics

“A robot is a reprogrammable, multifunctional manipulator

“A robot is a one-armed, blind idiot with limited memory

Tasks which are:

• Automation –Machinery designed to carry out a specific task

• Robots – machinery designed

• Pick and place

• Continuous path control

• Moves items from one point to

• Does not need to follow a specific

• Uses include loading and

• Moves along a specific path

• Uses include welding, cutting,

• Uses sensors for feedback.

• Closed-loop robots use sensors in

• Uses include mobile robotics,

• Speed and acceleration

Varies depending on position,

•Open loop, i.e., no feedback, deterministic

•Closed loop, i.e., feedback, maybe a sense of

• Degrees of freedom—number of independent motions

– Translation--3 independent directions

• General coordinate transformation from x’ to x is x = Bx’ + p ,

• More conveniently, one can create an augmented matrix

• Coordinate transformations of multilink systems are represented as

x0 = A01 A12A23. . .A(n-1)(n)xn

• Velocity, acceleration of end actuator

• Example of a 2D robotic link having three solenoids to

• Joint play, compounded through N joints

• Accelerating masses produce vibration, elastic deformations in links

• Torques, stresses transmitted depending on end actuator loads

• Position of end actuator

• Trajectory of end actuator: how to get from point A to B

• Example: end actuator (tip) problem with no closed solution.

• Arm tip moves by changing 1 and 2 as a function of time.

So, as 1 and 2 are changed, x and y are affected.

. So the rates at which 1 and 2 are changed depend on the values of

There is no closed-form solution to this problem. One must use

– Program the rates of change of 1 and 2 at the initial point and

– The rate of change of 1 and 2 can be changed in a

• Other kinematic mechanisms,

• Robots that can learn

You might also like