Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    B.Tech. I Year - II Semester Examinations: Model Paper - I Malla Reddy College of Engineering and Technology

    Uploaded by

    Anonymous rcmeSfj5
    This document contains a model paper for an Engineering Drawing exam with 10 questions. It provides instructions for the exam such as the time allotted, maximum marks, and that all questions carry equal marks. The questions cover topics like drawing projections of geometric shapes such as prisms, pyramids, cylinders, and hexagons in different orientations; drawing isometric views of combinations of shapes; and drawing front and side views of shapes from given dimensions. Students are to draw the projections, views, or figures as instructed in each multi-part question.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    B.Tech. I Year - II Semester Examinations: Model Paper - I Malla Reddy College of Engineering and Technology

    Uploaded by

    Anonymous rcmeSfj5
    49 views2 pages
    This document contains a model paper for an Engineering Drawing exam with 10 questions. It provides instructions for the exam such as the time allotted, maximum marks, and that all questions carry equal marks. The questions cover topics like drawing projections of geometric shapes such as prisms, pyramids, cylinders, and hexagons in different orientations; drawing isometric views of combinations of shapes; and drawing front and side views of shapes from given dimensions. Students are to draw the projections, views, or figures as instructed in each multi-part question.

    Original Description:

    edp

    Original Title

    Edp Model Paper Final

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a model paper for an Engineering Drawing exam with 10 questions. It provides instructions for the exam such as the time allotted, maximum marks, and that all questions carry equal marks. The questions cover topics like drawing projections of geometric shapes such as prisms, pyramids, cylinders, and hexagons in different orientations; drawing isometric views of combinations of shapes; and drawing front and side views of shapes from given dimensions. Students are to draw the projections, views, or figures as instructed in each multi-part question.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    49 views2 pages

    B.Tech. I Year - II Semester Examinations: Model Paper - I Malla Reddy College of Engineering and Technology

    Uploaded by

    Anonymous rcmeSfj5
    This document contains a model paper for an Engineering Drawing exam with 10 questions. It provides instructions for the exam such as the time allotted, maximum marks, and that all questions carry equal marks. The questions cover topics like drawing projections of geometric shapes such as prisms, pyramids, cylinders, and hexagons in different orientations; drawing isometric views of combinations of shapes; and drawing front and side views of shapes from given dimensions. Students are to draw the projections, views, or figures as instructed in each multi-part question.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    R15

    Code No:

    MODEL PAPER I
    MALLA REDDY COLLEGE OF ENGINEERING AND TECHNOLOGY
    B.Tech. I Year - II Semester Examinations
    ENGINEERING DRAWING
    (Common to MECH, ANE, Mining)
    Answer all questions
    All Question carry Equal Marks
    Time: 3hr

    Max. Marks: 75

    1. A thin regular pentagon of 30mm sides has one side on Hp and 300 inclined to Vp while its
    surface is 450 inclines to Hp. Draw its projections.
    OR
    2. Draw the projections of a square prism of 25mm sides base and 50mm long axis. The prism is
    resting with one of its corners in VP and axis inclined at 300 to VP and parallel to HP.
    3. Draw projections of a circle 40 mm diameter resting on Hp on a point A on the circumference
    with its surface 300 inclined to Hp and 450 to Vp.
    OR
    4. Draw the projections of a pentagonal prism resting on an edge of base on HP. The axis makes an
    angle of 300 with VP and 450 with HP. Take edge of base 25mm and axis length as 125mm
    5. A top view of plane figure whose surface is perpendicular to Vp and 60 0 inclined to Hp is
    regular hexagon of 30mm sides with one side 300 inclined to xy.Draw its projections.
    OR
    6. A hexagonal prism, base 30mm sides and axis 75mm long, has an edge of the base parallel to the
    HP and inclined at 450 to the VP. Its axis makes an angle of 600 with the HP. Draw its projections.
    7. A cube of 50mm long edges is resting on the ground, a hexagonal pyramid , base 25mm side and
    axis 50mm long, is placed centrally on the top of the cube so that their axes are in a straight line.
    Draw isometric View.
    OR
    8. a) Draw isometric view of the pentagonal pyramid with one of its base side on H.P and axis
    parallel to V.P.
    b) Draw isometric view of the cylinder with one of its base side on V.P and axis
    perpendicular to V.P.
    9. Draw the isometric view of the given below fig:

    FV
    XO
    10

    100

    40
    10 Y

    25
    10301025
    30 R
    20 D

    TV

    OR
    10. Draw the front view and side view of the given below fig:

    You might also like