Scribd Logo
Upload

Welcome to Scribd!

  • 392 views

    Roc L8

    Uploaded by

    Sara Contreras A
    The Atlas Copco ROC L8 is a down-the-hole crawler drill for high productivity quarrying and open pit mining with a hole diameter range of 110-165 mm. It is powered by a 317 kW Caterpillar diesel engine and Atlas Copco screw compressor with a maximum working pressure of 25 bar and 405 l/s free air delivery. The ROC L8 can drill holes to a maximum depth of 54 meters and has a travel speed of up to 3.4 km/h.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Roc L8

    Uploaded by

    Sara Contreras A
    392 views2 pages
    The Atlas Copco ROC L8 is a down-the-hole crawler drill for high productivity quarrying and open pit mining with a hole diameter range of 110-165 mm. It is powered by a 317 kW Caterpillar diesel engine and Atlas Copco screw compressor with a maximum working pressure of 25 bar and 405 l/s free air delivery. The ROC L8 can drill holes to a maximum depth of 54 meters and has a travel speed of up to 3.4 km/h.

    Original Title

    ROC L8

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Atlas Copco ROC L8 is a down-the-hole crawler drill for high productivity quarrying and open pit mining with a hole diameter range of 110-165 mm. It is powered by a 317 kW Caterpillar diesel engine and Atlas Copco screw compressor with a maximum working pressure of 25 bar and 405 l/s free air delivery. The ROC L8 can drill holes to a maximum depth of 54 meters and has a travel speed of up to 3.4 km/h.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    392 views2 pages

    Roc L8

    Uploaded by

    Sara Contreras A
    The Atlas Copco ROC L8 is a down-the-hole crawler drill for high productivity quarrying and open pit mining with a hole diameter range of 110-165 mm. It is powered by a 317 kW Caterpillar diesel engine and Atlas Copco screw compressor with a maximum working pressure of 25 bar and 405 l/s free air delivery. The ROC L8 can drill holes to a maximum depth of 54 meters and has a travel speed of up to 3.4 km/h.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Atlas Copco ROC L8

    Down-the-hole crawler for high productivity in quarries and open pit-mines. Hole range 110-165 mm (45/16"-61/2")

    Technical data ROC L8


    Recommended hole-diameter range with COP 44 110-130 mm 4 5/16"-51/8" COP 54 134-152 mm 51/4"-6" COP 64 156-165 mm 61/8"-61/2" Drill tube diam. 89/102/114 mm 31/2"/4"/41/2" Drill tube length 6 m 20 ft Hole Depth, max. 54 m 177 ft Compressor Atlas Copco, screw type compressor XRV 9 Working pressure max. 25 bar FAD 405 l/s Engine Caterpillar, water-cooled diesel engine, CAT 3196 ATAAC Rating at 2000 rpm 317 kW Fuel tank Total capacity Feed Feed length, total Travel length Feed extension Feed rate, max. Feed force, max. 775 l 11250 8100 1300 0.92 40 mm mm mm m/s kN

    363 psi 858 cfm

    431 HP 200 Usgal 37 267" 43" 180 ft/min 8950 lbf 2.1 mph 24729 lbf

    Tramming Tramming speed, max. 3.4 km/h Traction force 110 kN Hill climbing ability 20 Track oscillation 10/8 Ground clearance 405 mm Hydraulic Rotation unit DHR 45H Rotation speed 30-80 r/min Torque, max. 2400 Nm Transport dimensions Weight, optional equipment excluded, approx. 19900 Width 2490 Length 11250 Height, min. 3995

    16"

    1770 lbf/ft

    kg mm mm mm

    43780 lb 8 37 131"

    Standard equipment Tube handling system capacity of 8 tubes, with permutation Fuel saving device Two-speed traction motors Dust collector and pre-separator Feed extension Operators cab, ROPS and FOPS approved Reduced air pressure for collaring Break-out table Retractable suction hood Heavy duty tracks Optional equipment Air conditioning, heater Central lubrication system Electric refuelling pump Electronic hole inclination and depth control instrument Electronic hole inclination instrument Engine pre-heater Hydraulic support leg Service winch Track chains with triple grouser pads Water mist system

    Some machines illustrated in this brochure may have optional equipment. Atlas Copco reserves the right to modify products and change data without prior notice.

    Total Rock Drilling Technology

    You might also like