Table of Contents
Before you download and extract the files, you need to decide
where you want to extract them. When using pkgsrc as root user, pkgsrc
is usually installed in /usr/pkgsrc. You are though
free to install the sources and binary packages wherever you want in
your filesystem, provided that the pathname does not contain white-space
or other characters that are interpreted specially by the shell and some
other programs. A safe bet is to use only letters, digits, underscores
and dashes.
Before you download any pkgsrc files, you should decide
whether you want the current branch or the
stable branch. The latter is forked on a
quarterly basis from the current branch and only gets modified
for security updates. The names of the stable branches are built
from the year and the quarter, for example
2023Q3.
The second step is to decide how you want to download pkgsrc. You can get it as a tar file or via CVS. Both ways are described here.
Note that tar archive contains CVS working copy. Thus you can switch to using CVS at any later time.
The primary download location for all pkgsrc files is https://cdn.NetBSD.org/pub/pkgsrc/ or ftp://ftp.NetBSD.org/pub/pkgsrc/ (it points to the same location). There are a number of subdirectories for different purposes, which are described in detail in Appendix�D, Directory layout of the pkgsrc FTP server.
The tar archive for the current branch is in the directory
current and is called pkgsrc.tar.gz.
It is autogenerated weekly.
To save download time we provide bzip2- and
xz-compressed archives which are published at
pkgsrc.tar.bz2
and
pkgsrc.tar.xz
respectively.
You can fetch the same files using FTP.
The tar file for the stable branch 2023Q3 is in the
directory pkgsrc-2023Q3 and is also called pkgsrc.tar.gz.
To download the latest pkgsrc stable tarball, run:
$ftp ftp://ftp.NetBSD.org/pub/pkgsrc/pkgsrc-2023Q3/pkgsrc.tar.gz
If you prefer, you can also fetch it using "wget", "curl", or your web browser.
Then, extract it with:
$tar -xzf pkgsrc.tar.gz -C /usr
This will create the directory pkgsrc/
in /usr/ and all the package source will be
stored under /usr/pkgsrc/.
To download pkgsrc-current, run:
$ftp ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz
To fetch a specific pkgsrc stable branch, run:
$cd /usr && cvs -q -z2 -d [email protected]:/cvsroot checkout -r pkgsrc-2023Q3 -P pkgsrc
This will create the directory pkgsrc/
in your /usr/ directory and all the package source
will be stored under /usr/pkgsrc/.
To fetch the pkgsrc current branch, run:
$cd /usr && cvs -q -z2 -d [email protected]:/cvsroot checkout -P pkgsrc
Refer to the list of available mirrors to choose a faster CVS mirror, if needed.
If you get error messages from rsh, you need to set CVS_RSH variable. E.g.:
$cd /usr && env CVS_RSH=ssh cvs -q -z2 -d [email protected]:/cvsroot checkout -P pkgsrc
Refer to documentation on your command shell how to set CVS_RSH=ssh permanently.
For Bourne shells, you can set it in your .profile
or better globally in /etc/profile:
# set CVS remote shell command CVS_RSH=ssh export CVS_RSH
By default, CVS doesn't do things like most people would expect it to do.
But there is a way to convince CVS, by creating a file called .cvsrc
in your home directory and saving the following lines to it.
This file will save you lots of headache and some bug reports, so we strongly recommend it.
You can find an explanation of this file in the CVS documentation.
# recommended CVS configuration file from the pkgsrc guide cvs -q checkout -P update -dP diff -upN rdiff -u release -d
The preferred way to keep pkgsrc up-to-date is via CVS (which also works if you have first installed it via a tar file). It saves bandwidth and hard disk activity, compared to downloading the tar file again.
When updating from a tar file, you first need to completely remove the old pkgsrc directory. Otherwise those files that have been removed from pkgsrc in the mean time will not be removed on your local disk, resulting in inconsistencies. When removing the old files, any changes that you have done to the pkgsrc files will be lost after updating. Therefore updating via CVS is strongly recommended.
Note that by default the distfiles and the binary packages
are saved in the pkgsrc tree, so don't forget to rescue them
before updating. You can also configure pkgsrc to store distfiles
and packages in directories outside the pkgsrc tree by setting the
DISTDIR and PACKAGES
variables. See Chapter�6, Configuring pkgsrc for the details.
To update pkgsrc from a tar file, download the tar file as explained above. Then, make sure that you have not made any changes to the files in the pkgsrc directory. Remove the pkgsrc directory and extract the new tar file. Done.
To update pkgsrc via CVS, change to the pkgsrc directory and run cvs:
$cd /usr/pkgsrc && cvs update -dP
If you get error messages from rsh, you need to set CVS_RSH variable as described above. E.g.:
$cd /usr/pkgsrc && env CVS_RSH=ssh cvs up -dP
When updating pkgsrc, the CVS program keeps track of the branch you selected. But if you, for whatever reason, want to switch from the stable branch to the current one, you can do it by adding the option “-A” after the “update” keyword. To switch from the current branch back to the stable branch, add the “-rpkgsrc-2023Q3” option.
When you update pkgsrc, the CVS program will only touch those files that are registered in the CVS repository. That means that any packages that you created on your own will stay unmodified. If you change files that are managed by CVS, later updates will try to merge your changes with those that have been done by others. See the CVS manual, chapter “update” for details.