Hassan Zia Ullah’s Post

High resistance (bad) electrical connections and joints are no stranger to electrical generators either.

Insulation Resistance Test The insulation resistance test measures the resistance of the insulation between windings and between windings and the core. This test ensures there are no insulation defects that could lead to short circuits or other failures. #Electrical_Engineering #Transformers #Power_Transformers #Insulation_Resistance

What is Gang Isolator? Gang Isolator is a mechanical switch designed to completely disconnect (de-energize) a part of an electrical system or a feeder from the power source for safety purposes. Its primary function is to isolate electrical circuits for maintenance or repair by ensuring there is no residual voltage or current present in the isolated section.

Under rated electrical equipment can cause FIRE

CHBEBPOWER- (H) RW□-□ (F) series outdoor high voltage AC drop fuse (hereinafter referred to as "fuse") is applicable to the outdoor overhead distribution systems with a rated frequency of 50Hz and rated voltage of 10kV（12/15/35/40.5）. It is used as a protective element of circuit or electrical equipment in case of overload or short circuit fault of a power system. When traveling normally, the fuse is connected in series in the power line, the fuse is in a tensioned state, and the movable joint is locked. When the line fails, the fault current causes the fuse to blow, the movable joint is released, the fuse tube is quickly dropped, and the circuit is cut off, which plays a role in safety protection for the maintenance of the line and equipment. The load type fuse is added with elastic contact and arc extinguishing cover on the basis of the ordinary type, which is used to open and close the load current in the power system. More Info Check：https://lnkd.in/g6wmfd2N #Teamwork #QualityControl #ElectricalEngineering #powertransmission #powerdistribution #highvoltage #manufacturer #transformer #regulation #eletricalequipment #OilImmersed #outdoor #chbebpower #substation #arrester #isolationswitch #fuse

Summer's sweltering heat can put electrical transformers under stress, leading to decreased efficiency and potential damage. Learn how to protect your equipment with our latest blog post on safeguarding electrical transformers 👉 https://lnkd.in/ggr564z6 #transformer911 #transformers #hightolowvoltage #transformermaintenance #transformerservices

With improper earthing and voltage regulation, you risk loosing your motors and drives which apart from stopping operations, become a very expensive venture to replace or repair. PM and proactive approach to installations and commisioning are very important aspects for any industrial institution. I recently installed a lightening arrestor and earthing system for one of our sites. This was for the boiler electrical panel and, a proper earth wiring for all machinery including a weigh bridge which is used on site for ease of operation. A voltage regulator will help protect your machinery when there are power flactuations that may damage components or parts.

Question: Why is additional earthing often used alongside primary earthing in electrical systems? Options: A) To increase the current flow in the system B) To provide a backup path for fault currents C) To reduce the cost of electrical installation D) To eliminate the need for circuit breakers

𝐋𝐞𝐭'𝐬 𝐮𝐩 𝐬𝐩𝐚𝐫𝐤 𝐮𝐩 𝐚 𝐜𝐨𝐧𝐯𝐞𝐫𝐬𝐚𝐭𝐢𝐨𝐧 𝐚𝐛𝐨𝐮𝐭 𝐞𝐥𝐞𝐜𝐭𝐫𝐢𝐜𝐚𝐥 𝐬𝐚𝐟𝐞𝐭𝐲! Overloaded cords, improper use, and damaged insulation can all lead to electrical fires or shocks. Make sure to inspect your extension cords regularly for damage and replace any with frayed wires or loose plugs. 𝐖𝐡𝐚𝐭 𝐢𝐬 𝐭𝐡𝐞 𝐜𝐨𝐫𝐫𝐞𝐜𝐭 𝐰𝐚𝐲 𝐭𝐨 𝐮𝐬𝐞 𝐚𝐧 𝐞𝐱𝐭𝐞𝐧𝐬𝐢𝐨𝐧 𝐜𝐨𝐫𝐝? 𝐋𝐞𝐭 𝐮𝐬 𝐤𝐧𝐨𝐰 𝐢𝐧 𝐭𝐡𝐞 𝐜𝐨𝐦𝐦𝐞𝐧𝐭𝐬! #electricalsafety #electricianservices #electrician #electricalcontractor #qualityworkmanship #electricalsolutions #safetyfirst #reliableservice #SJElectric #SJE

CHBEBPOWER -(H) RW□-□ (F) series outdoor high voltage AC drop fuse (hereinafter referred to as "fuse") is applicable to the outdoor overhead distribution systems with a rated frequency of 50Hz and rated voltage of 10kV（12/15/35/40.5）. It is used as a protective element of circuit or electrical equipment in case of overload or short circuit fault of a power system. When traveling normally, the fuse is connected in series in the power line, the fuse is in a tensioned state, and the movable joint is locked. When the line fails, the fault current causes the fuse to blow, the movable joint is released, the fuse tube is quickly dropped, and the circuit is cut off, which plays a role in safety protection for the maintenance of the line and equipment. The load type fuse is added with elastic contact and arc extinguishing cover on the basis of the ordinary type, which is used to open and close the load current in the power system. More Info Check：https://lnkd.in/gWWfVTjz #Teamwork #QualityControl #ElectricalEngineering #powertransmission #powerdistribution #highvoltage #manufacturer #transformer #regulation #eletricalequipment #OilImmersed #outdoor #chbebpower #substation #arrester #isolationswitch #fuse