Alex Land’s Post

There's no compromise on quality in the automotive sector 🚗 So why not have the most comprehensive measurement machines? ❌ OGP's multi-sensor systems provide the complete solution to offer unrivalled accuracy, reliability and repeatability for your inspection. Automotive companies are increasingly turning to multi-sensor metrology to measure components due to the accurate measurements achievable that would be impossible or too inefficient using traditional metrology methods. Send me a message to discuss your measurement challenges and how OGP UK can help to solve them 📩🤝

How to use the GERSTEL TD 3.5+ for the 🚗 emission analysis of materials   The automotive industry is constantly evolving, seeking more advanced and efficient methods to ensure the safety and environmental compatibility of its materials. With this in mind, the importance of emissions analysis of interior materials cannot be overstated, with the VDA 278 method being the benchmark in the industry.   We're pleased to share with you that the GERSTEL TD 3.5+ has been rigorously tested and proven to be highly suitable for performing material emission analysis according to the VDA 278 method.   Our comprehensive AppNote delves into the seamless transition from the TDS to the TD 3.5+, demonstrating its compatibility, precision and performance without compromising the robustness for which GERSTEL systems are renowned.   This AppNote addresses the following topics:   - The TD 3.5+ achieves recovery and precision within the required specifications for VDA 278 analysis. - Demonstrates system suitability with limit of quantitation well within the required range. - Offers increased flexibility and compatibility with 3.5" tubes while maintaining high performance.   The TDS remains a reference instrument for material and air sample analysis. However, for those looking to embrace the future with enhanced flexibility and uncompromised performance, the TD 3.5+ is the perfect choice.   Download the full AppNote for all the details and see how this innovation can benefit your operations. https://lnkd.in/eUb4BrGB     #AutomotiveInnovation #MaterialEmissions #VDA278 #AutomotiveIndustry #MakingLabswork

If you ever wondered how to use the VDA278 method with the most flexible and versatile Thermal Desorber TD3.5+ ? Here is the answer: ⬇️

How does the STbench Motorized Cell revolutionize wrench testing? 1️⃣With a torque range from 1 to 1600 Nm, it complies with ISO 6789:2017 standards. 2️⃣This automated solution ensures accuracy, efficiency, and safety. 3️⃣Versatile and mobile, it caters to various manual wrench types. Upgrade your testing process today with the Atlas Copco STbench and Motorized Cell solution.

Test items of button batteries UL4200A certification: Physical performance test: including size and appearance inspection, material composition analysis, structural strength test, etc. Electrical performance test: such as capacity test, internal resistance test, overcharge and overdischarge protection test, etc. Environmental adaptability test: such as high temperature test, low temperature test, humidity test, etc., to evaluate the safety and performance stability of the battery under different environmental conditions.

SCS manufactures three different ESD Event Detection Meters and Monitors that allow you to identify ESD incidents throughout your manufacturing process. There are two handheld meter models and a continuous monitoring device. All of which are designed to detect and count ESD events that can damage sensitive components and cause tool lockups, erratic behavior and parametric errors. Once you can detect ESD Events, you can carry out diagnostics to determine what is causing them, and then you can put a solution in place. 

AEC-Q100 is a popular qual spec for Automotive ICs. It consists of a suite of tests, but only a subset (such as the "Accelerated Environment Stress Tests" in Test Group A) are directly related to packaging and assembly. Rev J of the spec was released in August 2023 and here are changes (marked green in the graphic) in Test Group A: 1) Addition of Acoustic Microscopy (AM) after Pre-conditioning (PC) to check for delamination: Die attach delamination greater than 50% for active die attach (electrically or thermally active) must be reported. Wire bonding surface delamination must be reported. 2) Addition of Acoustic Microscopy after Temp Cycling (TC) to check for delamination in die attach (if electrically or thermally active) or wire bonding surface. 3) Introduction of "Temperature Humidity (TH)" as an alternate test to Autoclave (AC/Pressure Cooker Test) or Unbiased Highly Accelerated Stress Test (uHAST). This test provides an alternate to packages sensitive to high temperatures and pressure (e.g., BGA). The test requires PC followed by TH (85C/85%RH) for 1000 hours. Link to the AEC-Q100 Rev. J spec: https://bit.ly/3PHXA7Y

Boost Your Production with the TR7500QE! Enhance the quality of your electronic assemblies with the TR7500QE from TRI. This Automated Optical Inspection (AOI) system provides precise, real-time analysis to ensure efficient and centralized production. 🔹 Advanced Solder Joint Inspection Technology The TR7500QE employs Four-Strategy Solder Inspection, thoroughly analyzing solder joints to ensure compliance with the most stringent quality standards. It detects and addresses defects immediately, reducing rework and waste. 🔹 Real-Time Production Analysis With features like Real-Time SPC Trend and Centralized Production Analysis, the TR7500QE enables continuous monitoring of your production quality, allowing you to make quick decisions that maximize efficiency and minimize errors. 🔹 Ready for Inspection in Minutes Thanks to the Smart Inspection Library, you can get your inspection system up and running in minutes, optimizing setup time while ensuring your products meet IPC standards. 🔹 Centralized Inspection Center Leverage the Centralized Inspection Center to manage multiple production lines from a single hub, improving productivity and ensuring consistent results across the board. Ask about our rental plans and discover how the TR7500QE can elevate your production without the need for large upfront investments! 💬 Interested? Contact us directly on LinkedIn to learn how we can help!

Cost savings through efficient testing: Avoid delays and costly rework – we can help design a testing program that meets the specific requirements of your target markets. Element Boxborough's customized testing programs ensure you only undergo the tests your product needs. This saves time and money compared to generic testing packages offered elsewhere.  https://bit.ly/3VlbTUt https://bit.ly/3IEQDSg

"The Megger EVCC300 is a really useful tool when investigating an EVSE (Electric Vehicle Supply Equipment). It gave me a better understanding of what's going on with the devices I checked, It should be considered a diagnostic tool rather than something to verify an installation though." Read the full product review!