Shahabuddin Ahmmad, PhD
Wilayah Persekutuan Kuala Lumpur, Malaysia
4K pengikut
500+ kenalan
Perihal
I have been working as a Senior Lecturer in the Department of Mechanical Engineering at…
Artikel oleh Shahabuddin
Aktiviti
-
Impact of our research: Research impact analysis can be done in different ways. In addition to citation impact/influence, Scopus has new features…
Impact of our research: Research impact analysis can be done in different ways. In addition to citation impact/influence, Scopus has new features…
Disukai oleh Shahabuddin Ahmmad, PhD
-
I will be attending the @AICMRH Australia India Research Group's two-day Symposium and Workshop at the @Indian Institute of Technology Hyderabad on…
I will be attending the @AICMRH Australia India Research Group's two-day Symposium and Workshop at the @Indian Institute of Technology Hyderabad on…
Disukai oleh Shahabuddin Ahmmad, PhD
-
Are you interested in graduate school in Chemical & Environmental Engineering? It is not too late to apply for our EECE program at Washington…
Are you interested in graduate school in Chemical & Environmental Engineering? It is not too late to apply for our EECE program at Washington…
Disukai oleh Shahabuddin Ahmmad, PhD
Pengalaman
Pendidikan
-
Monash University
-
Aktiviti dan Persatuan:Member of Chemical Engineering Post Graduate Association Executive Member of Bangladeshi Student Association of Monash University Member of Monash University Islamic Society
I completed my PhD from the Department of Chemical Engineering at Monash University, Melbourne. In my PhD, I studied the pyrolysis and co-gasification characteristics of solid fuels (biomass, waste and coal) for the synthesis of valuable fuels and chemicals (i.e., Hydrogen). I also did Aspen Plus process modelling and CFD analysis for the pyrolysis and gasification, including catalytic WGSR modelling. Also, a substantial part of my study involved with the kinetic study, characterisation of…
I completed my PhD from the Department of Chemical Engineering at Monash University, Melbourne. In my PhD, I studied the pyrolysis and co-gasification characteristics of solid fuels (biomass, waste and coal) for the synthesis of valuable fuels and chemicals (i.e., Hydrogen). I also did Aspen Plus process modelling and CFD analysis for the pyrolysis and gasification, including catalytic WGSR modelling. Also, a substantial part of my study involved with the kinetic study, characterisation of mineral matters, Rheology and slag viscosity.
-
-
- Design & Develop learning programs
- Address adult LLN skills
- Plan, organise & facilitate learning in the workplace/Provide work skill instruction/Plan, organise & develop group-based learning
- Plan assessment activity and processes/Assess competence/Participate in assessment validation/Design & Develop assessment tools -
-
I completed my MPhil degree from the University of Adelaide where I studied the multiphase flow behaviour of a fluidised bed solar receiver. I developed a novel CFD model to mitigate particle deposition on the glass window of the receiver with experimental validation.
-
-
Completed Mechanical engineering undergraduate courses such as Thermodynamics, Fluid Mechanics, Heat and Mass Transfer, Machine Design, Autocad, Production process, Instrumentation and Control, Power plant engineering, Automobile engineering, Refrigeration and Airconditioning, Engineering Mechanics and so on.
Lesen & Pensijilan
-
Python Basics
University of Michigan
-
Gas Cylinder, Liquid Nitrogen and OH&S training
Monash University
Dikeluarkan padaID Bukti Kelayakan 27312321 -
First Aid
CPR and First Aid
Dikeluarkan pada
Penerbitan
-
Study on the Friction and Wear Characteristics of Bio-lubricant Synthesized from Second Generation Jatropha Methyl Ester
Tribology in Industry
The demands for eco-friendly bio-lubricants are growing due to the
environmental concern and the rapid depletion of petroleum oil. This
paper outlines the tribological evaluation of jatropha methyl ester (JME)
based bio-lubricant by analyzing its anti-wear (AW) and extreme
pressure (EP) characteristics. The AW and EP tests were conducted using
a four-ball tribotester with standard test methods of ASTM D 4172 and
ASTM D 2783, respectively. After each test, the wear scar…The demands for eco-friendly bio-lubricants are growing due to the
environmental concern and the rapid depletion of petroleum oil. This
paper outlines the tribological evaluation of jatropha methyl ester (JME)
based bio-lubricant by analyzing its anti-wear (AW) and extreme
pressure (EP) characteristics. The AW and EP tests were conducted using
a four-ball tribotester with standard test methods of ASTM D 4172 and
ASTM D 2783, respectively. After each test, the wear scar diameter, flash
temperature parameter, viscosity and viscosity index (VI) were measured.
The SEM analysis characterized the surface structure of the worn surface.
The properties of formulated bio-lubricants were compared with the
commercial lubricant SAE 15W-40. Experimental results showed that
under boundary lubrication, the bio-lubricants showed excellent
tribological properties up to the initial seizure load (ISL). Over the ISL,
the friction and wear were increased slightly as compared to the
commercial lubricant. The final seizure load (FSL) found for the biolubricant (BL 10), and commercial lubricant was 220 kg. The biolubricant with 10 % JME (BL 10) was found to be the most favorable,
which met standard ISO requirements except for pour point -
A study on the performance of coke resistive cerium modified zeolite Y catalyst for the pyrolysis of scrap tyres in a two-stage fixed bed reactor
Waste Management
Highlights
•Waste tyres were converted into useful fuels through catalytic process.
•Two-stage fixed bed reactor was used for the catalytic pyrolysis.
•Aromatic production was increased over zeolite catalysts.
•Cerium incorporated zeolite Y catalysts decreased the coke formation. -
Gasification characteristics of Bangladeshi Barapukurian coal in a high-temperature entrained flow gasifier under CO2 atmosphere
AIP Conference Proceedings
Pengarang lain -
An experimental investigation into biodiesel stability by means of oxidation and property determination
Energy
-
Application of blend fuels in a diesel engine
Energy Procedia
-
Biofuel: policy, standardization and recommendation for sustainable future energy supply
Energy Procedia
-
Biofuel: Potential Energy Source in Road Transportation Sector in Malaysia
Sustainable Future Energy conference
-
Comparative corrosion characteristics of automotive materials in Jatropha biodiesel
International journal of green energy
-
Comparative tribological investigation of bio-lubricant formulatedfrom a non-edible oil source (Jatropha oil)
Industrial Crops and Products
-
Development of eco-friendly biodegradable biolubricant based on jatropha oil
Tribology in Engineering
-
Effect of additive on performance of CI engine fuelled with bio diesel
Energy Procedia
-
Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: A review
Renewable and Sustainable Energy Reviews
-
Effect of Coconut Biodiesel Blended Fuels on Engine Performance and Emission Characteristics
Procedia Engineering
-
Entrained flow co-gasification of Bangladeshi Barapukuria coal and Australian pine-bark
SEGT 2018: International Conference on Sustainable Energy and Green Technology
-
Experimental Investigation into Tribological Characteristics of Bio-Lubricant Formulated from Jatropha Oil
Procedia Engineering
-
Experimental study of additive added palm biodiesel in a compression ignition engine
Energy Education Science and Technology Part A: Energy Science and Research
-
Heat transfer performance for turbulent flow through a tube using double helical tape inserts
International Communications in Heat and Mass Transfer
-
Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel
Renewable and Sustainable Energy Reviews
-
Influence of Additive on the Performance and Emission of Biodiesel Fueled Diesel Engine
International Journal of Science and Engineering Investigations
-
Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear
Energy Procedia
-
Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts
International Communications in Heat and Mass Transfer
-
Production of syngas using entrained flow gasification of pine bark biomass aiming to reduce greenhouse gas emission from power generation
International Conference on Mechanical, Industrial and Energy Engineering 2018
-
Prospects of biodiesel from Jatropha in Malaysia
Renewable and Sustainable Energy Reviews
-
Single-phase flow analysis: an attempt to mitigate particle deposition on the glass window of a fluidised bed solar receiver
Solar Engineering Engineering
-
Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts
International Communications in Heat and Mass Transfer
-
Tribological characteristics of amine phosphate and octylated/butylated diphenylamine additives infused biolubricant
Energy Education Science and Technology Part A: Energy Science and Research
-
Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant
Energy
Kursus
-
Advanced Numerical Methods
1
-
Research Communication
1
-
Research Design
1
Projek
-
Particle fragmentation characteristics of coal and biomass particles under pyrolysis condition in entrained bed gasifier
-
Supervised a group of three Masters students for CHE 4180 course in Chemical Engineering department of Monash University.
Pengiktirafan & Anugerah
-
Postgraduate Publication Award (PPA)
Monash University
I have been awarded the PPA as a high-achieving PhD graduate due to my outstanding performance in PhD with a particular focus on publications. This award is highly competitive and only offered to 10 PhD scholars from each faculty in each round.
-
Monash Graduate scholarship (MGS).
Monash University
-
Monash International Post Graduate Research Scholarships (MIPRS)
Monash University
-
Adelaide Scholarship International (ASI)
The Univesity of Adelaide
Bahasa
-
English
Kecekapan bahasa profesional penuh
-
Bengali
Penutur asli atau dwibahasa
-
Bahasa Malaya
Kemahiran profesional
-
Urdu
Kemahiran kerja terhad
Organisasi
-
Materials Australia
Certified Material professional (CMatP)
- Kini -
Institution of Chemical Engineers (IChemE)
Associate Member
- Kini -
Institute of Engineers Australia
Member
- Kini -
Institute of Engineers Bangladesh
Member
- Kini
Lagi aktiviti oleh Shahabuddin
-
How crazy and Big Anode it is. Didn't even imagine about this size of anode when I was in school. Happy to be a part of the manufacturing from…
How crazy and Big Anode it is. Didn't even imagine about this size of anode when I was in school. Happy to be a part of the manufacturing from…
Disukai oleh Shahabuddin Ahmmad, PhD
-
In addition to conducting high quality research, supervision, collaboration, Research Centre for Nano-Materials and Energy Technology (RCNMET)…
In addition to conducting high quality research, supervision, collaboration, Research Centre for Nano-Materials and Energy Technology (RCNMET)…
Disukai oleh Shahabuddin Ahmmad, PhD
-
I really enjoyed attending the 12th Annual Symposium of the Institute of Refractories Engineers Australasia this week in Sydney. I learn't alot and…
I really enjoyed attending the 12th Annual Symposium of the Institute of Refractories Engineers Australasia this week in Sydney. I learn't alot and…
Disukai oleh Shahabuddin Ahmmad, PhD
-
Yesterday I was honoured to recieve the Vice Chancellor's Research Excellence Award. This is a great honour. Thank you Vice Chancellor Professor…
Yesterday I was honoured to recieve the Vice Chancellor's Research Excellence Award. This is a great honour. Thank you Vice Chancellor Professor…
Disukai oleh Shahabuddin Ahmmad, PhD
-
After two decades in academia, including eight enriching years at North Carolina State University, I am excited to begin a new chapter in my career…
After two decades in academia, including eight enriching years at North Carolina State University, I am excited to begin a new chapter in my career…
Disukai oleh Shahabuddin Ahmmad, PhD
-
Universiti Malaya kini membuka peluang kepada calon yang berpotensi untuk menyertai Skim Latihan Akademik Bumiputera (SLAB), Skim Latihan Akademik…
Universiti Malaya kini membuka peluang kepada calon yang berpotensi untuk menyertai Skim Latihan Akademik Bumiputera (SLAB), Skim Latihan Akademik…
Disukai oleh Shahabuddin Ahmmad, PhD
-
My two undergraduate students, Md Mahmudul Hasan (pursuing M.Sc. Engg. in Malaysia now) and Akash Saha, conducted this research, which has just been…
My two undergraduate students, Md Mahmudul Hasan (pursuing M.Sc. Engg. in Malaysia now) and Akash Saha, conducted this research, which has just been…
Disukai oleh Shahabuddin Ahmmad, PhD
-
It was our immense pleasure to host Dr. Kazi Nazmul Hasan, a faculty member of RMIT University, today during our research team weekly meeting. The…
It was our immense pleasure to host Dr. Kazi Nazmul Hasan, a faculty member of RMIT University, today during our research team weekly meeting. The…
Disukai oleh Shahabuddin Ahmmad, PhD