MySQL 8.0 Release Notes
MySQL 8.0 Source Code Documentation
When you attempt to connect to a MySQL server, the server accepts or rejects the connection based on these conditions:
Your identity and whether you can verify it by supplying the proper credentials.
Whether your account is locked or unlocked.
The server checks credentials first, then account locking state. A failure at either step causes the server to deny access to you completely. Otherwise, the server accepts the connection, and then enters Stage 2 and waits for requests.
The server performs identity and credentials checking using
columns in the user table, accepting the
connection only if these conditions are satisfied:
The client host name and user name match the
HostandUsercolumns in someusertable row. For the rules governing permissibleHostandUservalues, see Section 8.2.4, “Specifying Account Names”.The client supplies the credentials specified in the row (for example, a password), as indicated by the
authentication_stringcolumn. Credentials are interpreted using the authentication plugin named in theplugincolumn.The row indicates that the account is unlocked. Locking state is recorded in the
account_lockedcolumn, which must have a value of'N'. Account locking can be set or changed with theCREATE USERorALTER USERstatement.
Your identity is based on two pieces of information:
Your MySQL user name.
The client host from which you connect.
If the User column value is nonblank, the user
name in an incoming connection must match exactly. If the
User value is blank, it matches any user name.
If the user table row that matches an incoming
connection has a blank user name, the user is considered to be an
anonymous user with no name, not a user with the name that the
client actually specified. This means that a blank user name is
used for all further access checking for the duration of the
connection (that is, during Stage 2).
The authentication_string column can be blank.
This is not a wildcard and does not mean that any password
matches. It means that the user must connect without specifying a
password. The authentication method implemented by the plugin that
authenticates the client may or may not use the password in the
authentication_string column. In this case, it
is possible that an external password is also used to authenticate
to the MySQL server.
Nonblank password values stored in the
authentication_string column of the
user table are encrypted. MySQL does not store
passwords as cleartext for anyone to see. Rather, the password
supplied by a user who is attempting to connect is encrypted
(using the password hashing method implemented by the account
authentication plugin). The encrypted password then is used during
the connection process when checking whether the password is
correct. This is done without the encrypted password ever
traveling over the connection. See Section 8.2.1, “Account User Names and Passwords”.
From the MySQL server's point of view, the encrypted password
is the real password, so you should never
give anyone access to it. In particular, do not give
nonadministrative users read access to tables in the
mysql system database.
The following table shows how various combinations of
User and Host values in the
user table apply to incoming connections.
User Value |
Host Value |
Permissible Connections |
|---|---|---|
'fred' |
'h1.example.net' |
fred, connecting from
h1.example.net |
'' |
'h1.example.net' |
Any user, connecting from h1.example.net |
'fred' |
'%' |
fred, connecting from any host |
'' |
'%' |
Any user, connecting from any host |
'fred' |
'%.example.net' |
fred, connecting from any host in the
example.net domain |
'fred' |
'x.example.%' |
fred, connecting from
x.example.net,
x.example.com,
x.example.edu, and so on; this is
probably not useful |
'fred' |
'198.51.100.177' |
fred, connecting from the host with IP address
198.51.100.177 |
'fred' |
'198.51.100.%' |
fred, connecting from any host in the
198.51.100 class C subnet |
'fred' |
'198.51.100.0/255.255.255.0' |
Same as previous example |
It is possible for the client host name and user name of an
incoming connection to match more than one row in the
user table. The preceding set of examples
demonstrates this: Several of the entries shown match a connection
from h1.example.net by fred.
When multiple matches are possible, the server must determine which of them to use. It resolves this issue as follows:
Whenever the server reads the
usertable into memory, it sorts the rows.When a client attempts to connect, the server looks through the rows in sorted order.
The server uses the first row that matches the client host name and user name.
The server uses sorting rules that order rows with the
most-specific Host values first:
Literal IP addresses and host names are the most specific.
Prior to MySQL 8.0.23, the specificity of a literal IP address is not affected by whether it has a netmask, so
198.51.100.13and198.51.100.0/255.255.255.0are considered equally specific. As of MySQL 8.0.23, accounts with an IP address in the host part have this order of specificity:Accounts that have the host part given as an IP address:
CREATE USER 'user_name'@'127.0.0.1'; CREATE USER 'user_name'@'198.51.100.44';Accounts that have the host part given as an IP address using CIDR notation:
CREATE USER 'user_name'@'192.0.2.21/8'; CREATE USER 'user_name'@'198.51.100.44/16';Accounts that have the host part given as an IP address with a subnet mask:
CREATE USER 'user_name'@'192.0.2.0/255.255.255.0'; CREATE USER 'user_name'@'198.51.0.0/255.255.0.0';
The pattern
'%'means “any host” and is least specific.The empty string
''also means “any host” but sorts after'%'.
Non-TCP (socket file, named pipe, and shared memory) connections
are treated as local connections and match a host part of
localhost if there are any such accounts, or
host parts with wildcards that match localhost
otherwise (for example, local%,
l%, %).
The treatment of '%' as equivalent to
localhost is deprecated as of MySQL 8.0.35, and
you should expect this behavior to removed from a future version
of MySQL.
Rows with the same Host value are ordered with
the most-specific User values first. A blank
User value means “any user” and is
least specific, so for rows with the same Host
value, nonanonymous users sort before anonymous users.
For rows with equally-specific Host and
User values, the order is nondeterministic.
To see how this works, suppose that the user
table looks like this:
+-----------+----------+-
| Host | User | ...
+-----------+----------+-
| % | root | ...
| % | jeffrey | ...
| localhost | root | ...
| localhost | | ...
+-----------+----------+-When the server reads the table into memory, it sorts the rows using the rules just described. The result after sorting looks like this:
+-----------+----------+-
| Host | User | ...
+-----------+----------+-
| localhost | root | ...
| localhost | | ...
| % | jeffrey | ...
| % | root | ...
+-----------+----------+-
When a client attempts to connect, the server looks through the
sorted rows and uses the first match found. For a connection from
localhost by jeffrey, two of
the rows from the table match: the one with
Host and User values of
'localhost' and '', and the
one with values of '%' and
'jeffrey'. The 'localhost'
row appears first in sorted order, so that is the one the server
uses.
Here is another example. Suppose that the user
table looks like this:
+----------------+----------+-
| Host | User | ...
+----------------+----------+-
| % | jeffrey | ...
| h1.example.net | | ...
+----------------+----------+-The sorted table looks like this:
+----------------+----------+-
| Host | User | ...
+----------------+----------+-
| h1.example.net | | ...
| % | jeffrey | ...
+----------------+----------+-
The first row matches a connection by any user from
h1.example.net, whereas the second row matches
a connection by jeffrey from any host.
Note
It is a common misconception to think that, for a given user
name, all rows that explicitly name that user are used first
when the server attempts to find a match for the connection.
This is not true. The preceding example illustrates this, where
a connection from h1.example.net by
jeffrey is first matched not by the row
containing 'jeffrey' as the
User column value, but by the row with no
user name. As a result, jeffrey is
authenticated as an anonymous user, even though he specified a
user name when connecting.
If you are able to connect to the server, but your privileges are
not what you expect, you probably are being authenticated as some
other account. To find out what account the server used to
authenticate you, use the
CURRENT_USER() function. (See
Section 14.15, “Information Functions”.) It returns a value in
user_name@host_nameUser and
Host values from the matching
user table row. Suppose that
jeffrey connects and issues the following
query:
mysql> SELECT CURRENT_USER();
+----------------+
| CURRENT_USER() |
+----------------+
| @localhost |
+----------------+
The result shown here indicates that the matching
user table row had a blank
User column value. In other words, the server
is treating jeffrey as an anonymous user.
Another way to diagnose authentication problems is to print out
the user table and sort it by hand to see where
the first match is being made.