Eia Screening

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 17

Environmental

impact
assessment
kid 4008
Dr. Farahin Mohd Jais

WEEK 3
EIA SCREENING
PURPOSE OF
SCREENING
PROCESS
The purpose of screening
 Is to determine :
 Whether or not a proposal requires an EIA
 What level of EIA required

 Outcomes of screening
 Full or comprehensive EIA required
 More or limited EIA required
 Further study needed to determine EIA requirement
or no further requirement for EIA
Usually, screening has out of four
outcomes:
1. No further EIA requirement applies “ the proposal will have an
insignificant impact”;
2. A preliminary EIA study is required “ the proposal will have an
environmental impact that must be addressed but can be
mitigated”;
3. A full or comprehensive EIA is required to complete the screening
process “ the proposal will have a potentially significant
environmental impact”; or
4. An IEE (Initial Environmental Examination) is required “ the
potential environmental effects of the proposal are unclear
or uncertain”.
SCREENING METHOD
1. Legal / policy definition
2. Inclusion list of projects (with or without
thresholds)
3. Exclusion list of projects
4. Criteria for case-by-case screening
extended screening procedures include:
• Initial Environmental Examination (IEE) carried out in cases where the
environmental impacts of a proposal are uncertain or unknown (e.g.
new technologies or undeveloped areas);

• Environmental overview carried out as a rapid assessment of the


environmental issues and impacts of a proposal; and

• Class screening carried out for a family of small projects or repetitive


activities, where the environmental effects and means of mitigation
are known but there is potential for cumulative impacts (e.g. dredging,
road realignment, bank stabilization).
What are the difference between iee and
eia?
The purpose of both are the same which are to ensure the particular proposed project is
sustainable and all possible environmental impact of the proposed project are identified and
adequately mitigate by the design project.

IEE EIA
Preliminary Full
environmental environmental
review assessment

For small scale For large scale


project project

If EIA is not required, the IEE is Project with no Project with


significant significant
regarded as the final environmental adverse impact adverse impact
assessment report.
Location and environmental criteria for
case-by-case screening

The following are important in determining significant effects:

• Assimilative capacity of the natural environment


• Environmental sensitivity
• Environmental standard and objectives
• Adjacent to protect or design areas
• Within landscapes of special heritage values
• Existing land use and commitments
• Abundance and quality of natural resources
EXTENDED SCREENING
• Information required by decision-makers
• Description of proposal
• Condition and characteristic of environment
• Applicable policy, planning and regulatory
objectives
• Identification of potential impacts
• Degree of public concern and interest
Project list for screening

• Projects requiring a full EIA because of their likely


environmental effects;
• Projects not requiring a full EIA but warranting a further
level of assessment ; and
• Projects not requiring further environmental analysis (for
example health and nutrition, institutional and human
resource development and technical assistance).
A proposal can be tested for significance
by taking account of:
• Location near to protected or designated areas or within
landscapes of special heritage value;
• Existing land use(s) and commitments;
• The relative abundance, quality and regenerative capacity of
natural resources;
• The absorption capacity of the natural environment, paying
particular attention to wetlands, coastal zones, mountain and
forest areas; and
• Areas in which the environmental quality standards laid down in
law have been exceeded already.
THE END…

You might also like