Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    SPOG Wall Lab Data Lake - InstaCC Connectivity IOR - V3.0

    Uploaded by

    zeeshankaizer
    This document outlines requirements to extend an existing Wall Lab data lake subnet to a production InstaCC platform over an MPLS network. It requires creating a new VRF "SPG-DATA-LAKE" on MPLS provider edge routers and extending this VRF to InstaCC sites. Specific requirements include new VLANs, IP addresses, and BGP configurations between MPLS routers and InstaCC switches in New York, Singapore, and Hyderabad to establish logical connectivity. The goal is to connect various data centers within the InstaCC network to enable sharing of data lake resources.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    SPOG Wall Lab Data Lake - InstaCC Connectivity IOR - V3.0

    Uploaded by

    zeeshankaizer
    15 views6 pages
    This document outlines requirements to extend an existing Wall Lab data lake subnet to a production InstaCC platform over an MPLS network. It requires creating a new VRF "SPG-DATA-LAKE" on MPLS provider edge routers and extending this VRF to InstaCC sites. Specific requirements include new VLANs, IP addresses, and BGP configurations between MPLS routers and InstaCC switches in New York, Singapore, and Hyderabad to establish logical connectivity. The goal is to connect various data centers within the InstaCC network to enable sharing of data lake resources.

    Original Title

    SPOG Wall Lab Data Lake_InstaCC Connectivity IOR_V3.0

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines requirements to extend an existing Wall Lab data lake subnet to a production InstaCC platform over an MPLS network. It requires creating a new VRF "SPG-DATA-LAKE" on MPLS provider edge routers and extending this VRF to InstaCC sites. Specific requirements include new VLANs, IP addresses, and BGP configurations between MPLS routers and InstaCC switches in New York, Singapore, and Hyderabad to establish logical connectivity. The goal is to connect various data centers within the InstaCC network to enable sharing of data lake resources.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    15 views6 pages

    SPOG Wall Lab Data Lake - InstaCC Connectivity IOR - V3.0

    Uploaded by

    zeeshankaizer
    This document outlines requirements to extend an existing Wall Lab data lake subnet to a production InstaCC platform over an MPLS network. It requires creating a new VRF "SPG-DATA-LAKE" on MPLS provider edge routers and extending this VRF to InstaCC sites. Specific requirements include new VLANs, IP addresses, and BGP configurations between MPLS routers and InstaCC switches in New York, Singapore, and Hyderabad to establish logical connectivity. The goal is to connect various data centers within the InstaCC network to enable sharing of data lake resources.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 6

    InstaCC Network

    Video MX480-2
    BGP

    MPLS 4755

    Singapore MPLS PE
    Video MX480-1
    SPOG-DATA-LAKE
    VRF
    WALL LAB
    SPG-DATA-LAKE VPN
    Ny-t1a-n99x-hpe01 Wall SPOG Data Lake
    Voice MX960 Subnet 10.10.154.0/24
    VLAN- 154
    Port Ge-2/2/2 Port Ge-11/2/6
    HYD MPLS PE

    PUN MPLS PE

    GDE Link Pune-Wall


    PUNE UCC LAB
    PUN-IDC-LAB49S01 Pune SPOG Data Lake
    PUN-IDC-LAB49S01
    Port Gi-1/30 Subnet 172.16.164.53/24
    172.16.164.54/24
    VLAN- 164
    IOR-1 Details – Wall SPOG Data Lake extension to Production InstaCC Platform

    This requirement is to extend existing Wall Lab Data lake subnets to production InstaCC platform over the
    existing MPLS physical NNI Port. details of MPLS connectivity already given in above diagram. We need to
    Create New VRF with name “SPG-DATA-LAKE” at MPLS PE end.

    same VRF will be extended to InstaCC platform.

    New VRF Name at MPLS PE – SPG-DATA-LAKE

    VLAN requirement:

    Need new VLAN at NY MPLS router connecting to Ny-t1a-n99x-hpe01 # Port Ge-2/2/2

    IP Requirement :

    Need new /30 Private WAN IP at New-York MPLS router Ny-t1a-n99x-hpe01 # Port Ge-2/2/2 connecting
    to Wall Lab MX960 router.

    BGP to be use as PE-CE routing protocol and CE side AS number is 64800. PE side AS is 4755 & Please
    configured b/w of 10 Mbps for this logical connectivity.
    IOR-2 Details – Wall SPOG Data Lake extension to Production InstaCC Platform

    This requirement is to extend existing Wall Lab Data lake subnets to production InstaCC platform over the
    existing MPLS physical NNI Port. details of MPLS connectivity already given in above diagram. We need to
    Create New VRF with name “SPG-DATA-LAKE” at MPLS PE end.

    same VRF will be extended to InstaCC platform.

    VRF Name at MPLS PE – SPG-DATA-LAKE (Same VRF needs to extended towards InstaCC sites, which we
    are creating in above IOR-1). All these IORs should be part of same VRF.

    VLAN requirement:
    Need new VLAN at Singapore MPLS router connecting to si-t1a-svwx-hpe01 # Port Ge-10/1/6

    IP Requirement :
    Need new /30 Private WAN IP at Singapore MPLS router si-t1a-svwx-hpe01 # Port Ge-10/1/6 connecting
    to Singapore InstaCC N5K01.

    BGP to be use as PE-CE routing protocol and CE side AS number is 65001. PE side AS is 4755 & Please
    configured b/w of 10 Mbps for this logical connectivity.
    IOR-3 Details – Wall SPOG Data Lake extension to Production InstaCC Platform

    This requirement is to extend existing Wall Lab Data lake subnets to production InstaCC platform over the
    existing MPLS physical NNI Port. details of MPLS connectivity already given in above diagram. We need to
    Create New VRF with name “SPG-DATA-LAKE” at MPLS PE end.

    same VRF will be extended to InstaCC platform.

    VRF Name at MPLS PE – SPG-DATA-LAKE (Same VRF needs to extended towards InstaCC sites, which we
    are creating in above IOR-1) All these IORs should be part of same VRF.

    VLAN requirement:
    Need new VLAN at Singapore MPLS router connecting to si-t1a-svwx-hpe02 # Port Ge-10/1/6

    IP Requirement :
    Need new /30 Private WAN IP at Singapore MPLS router si-t1a-svwx-hpe02 # Port Ge-10/1/6 connecting
    to Singapore InstaCC N5K02.

    BGP to be use as PE-CE routing protocol and CE side AS number is 65001. PE side AS is 4755 & Please
    configured b/w of 10 Mbps for this logical connectivity.
    IOR-4 Details – Wall SPOG Data Lake extension to Production InstaCC Platform

    This requirement is to extend existing Wall Lab Data lake subnets to production InstaCC platform over the
    existing MPLS physical NNI Port. details of MPLS connectivity already given in above diagram. We need to
    Create New VRF with name “SPG-DATA-LAKE” at MPLS PE end.

    same VRF will be extended to InstaCC platform.

    VRF Name at MPLS PE – SPG-DATA-LAKE (Same VRF needs to extended towards InstaCC sites, which we
    are creating in above IOR-1) All these IORs should be part of same VRF.

    VLAN requirement:
    Need new VLAN at Hyderabad MPLS router connecting to Hb-me01-hpe01 # Port Ge-1/2/15

    IP Requirement :
    Need new /30 Private WAN IP at Hyderabad MPLS router Hb-me01-hpe01 # Port Ge-1/2/15 connecting
    to Hyderabad InstaCC N5K01

    BGP to be use as PE-CE routing protocol and CE side AS number is 65001. PE side AS is 4755 & Please
    configured b/w of 10 Mbps for this logical connectivity.
    IOR-4 Details – Wall SPOG Data Lake extension to Production InstaCC Platform

    This requirement is to extend existing Wall Lab Data lake subnets to production InstaCC platform over the
    existing MPLS physical NNI Port. details of MPLS connectivity already given in above diagram. We need to
    Create New VRF with name “SPG-DATA-LAKE” at MPLS PE end.

    same VRF will be extended to InstaCC platform.

    VRF Name at MPLS PE – SPG-DATA-LAKE (Same VRF needs to extended towards InstaCC sites, which we
    are creating in above IOR-1) All these IORs should be part of same VRF.

    VLAN requirement:
    Need new VLAN at Hyderabad MPLS router connecting to Hb-me01-hpe02 # Port Ge-1/2/2

    IP Requirement :
    Need new /30 Private WAN IP at Hyderabad MPLS router Hb-me01-hpe02 # Port Ge-1/2/2 connecting to
    Hyderabad InstaCC N5K02.

    BGP to be use as PE-CE routing protocol and CE side AS number is 65001. PE side AS is 4755 & Please
    configured b/w of 10 Mbps for this logical connectivity.

    You might also like