Department of Mechanical Engineering: MACHIINE DESIGN by Rnavarro JR
Department of Mechanical Engineering: MACHIINE DESIGN by Rnavarro JR
Department of Mechanical Engineering: MACHIINE DESIGN by Rnavarro JR
Example:
A motor turning at 1160 rpm drives a conveyor via straight bevel
gears with 20 and 60 teeth, Pd = 6, Dp = 3 in and Dg = 9 in. The
material of the gears is AISI 3140, QT to 300 BHN. The pinion is
overhung, the gears is straddle mounted. The service is such that a
service factor of Nsf = 1.2 applies; operating temperature is normal.
If the power transmitted is 10 hp, determine the face width.