4 - Introduction To Dynamic Routing & DV Vs Ls

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 26

Introduction to Dynamic

Routing Protocol

ITE I Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1
Objectives
 Describe the role of dynamic routing protocols and
place these protocols in the context of modern
network design.
 Identify several ways to classify routing protocols.
 Describe how metrics are used by routing protocols
and identify the metric types used by dynamic routing
protocols.
 Determine the administrative distance of a route and
describe its importance in the routing process.
 Identify the different elements of the routing table.

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 2
Dynamic Routing Protocols

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 3
Dynamic Routing Protocols
 Function(s) of Dynamic Routing Protocols:
-Dynamically share information between routers.
-Automatically update routing table when topology changes.
-Determine best path to a destination.

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 4
Dynamic Routing Protocols
 The purpose of a dynamic routing protocol is to:
-Discover remote networks
-Maintaining up-to-date routing information
-Choosing the best path to destination networks
-Ability to find a new best path if the current path is no longer
available

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 5
Dynamic Routing Protocols

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 6
Dynamic Routing Protocols
 Components of a routing protocol
Algorithm
In the case of a routing protocol algorithms are used for
facilitating routing information and best path determination
Routing protocol messages
These are messages for discovering neighbors and
exchange of routing information

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 7
Dynamic Routing Protocols
 Advantages of static routing
-It can backup multiple interfaces/networks on a router
-Easy to configure
-No extra resources are needed
-More secure

 Disadvantages of static routing


-Network changes require manual reconfiguration
-Does not scale well in large topologies

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 8
Classifying Routing Protocols
 Dynamic routing protocols are grouped according to
characteristics. Examples include:

 Autonomous System is a group of routers under the control of


a single authority.

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 9
Classifying Routing Protocols
 Types of routing protocols:
-Interior Gateway Protocols (IGP)
-Exterior Gateway Protocols (EGP)

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 10
Classifying Routing Protocols
 Interior Gateway Routing Protocols (IGP)
-Used for routing inside an autonomous system & used to route
within the individual networks themselves.
-Examples: RIP, EIGRP, OSPF

 Exterior Routing Protocols (EGP)


-Used for routing between autonomous systems
-Example: BGPv4

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 11
Classifying Routing Protocols
 IGP: Comparison of Distance Vector & Link State Routing
Protocols
Distance vector
– routes are advertised as vectors of distance & direction.
– incomplete view of network topology.
–Generally, periodic updates.
Link state
– complete view of network topology is created.
– updates are not periodic.

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 12
Classifying Routing Protocols

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 13
Classifying Routing Protocols

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 14
Classifying Routing Protocols
 Classful routing protocols
Do NOT send subnet mask in
routing updates

 Classless routing
protocols
send subnet mask in
routing updates.

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 15
Classifying Routing Protocols
 Convergence is defined as when all routers’ routing
tables are at a state of consistency

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 16
Routing Protocols Metrics
 Metric
A value used by a routing protocol to determine which
routes are better than others.

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 17
Routing Protocols Metrics
 Metrics used in IP routing protocols
-Bandwidth
-Cost
-Delay
-Hop count
-Load
-Reliability

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 18
Routing Protocols Metrics
 The Metric Field in the
Routing Table
 Metric used for each
routing protocol
-RIP - hop count
-IGRP & EIGRP - Bandwidth
(used by default), Delay (used
by default), Load,
Reliability,MTU
-IS-IS & OSPF – Cost
( Bandwidth (Cisco’s
implementation))

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 19
Routing Protocols Metrics
 Load balancing
This is the ability of a router to distribute packets among
multiple same cost paths

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 20
Administrative Distance of a Route
 Purpose of a metric
It’s a calculated value used to determine the best path to a
destination

 Purpose of Administrative Distance


It’s a numeric value that specifies the preference of a particular
route

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 21
Administrative Distance of a Route
 Identifying the Administrative Distance (AD) in a
routing table
It is the first number in the brackets in the routing table

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 22
Administrative Distance of a Route
 Dynamic Routing Protocols

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 23
Administrative Distance of a Route
 Directly connected routes
Have a default AD of 0

 Static Routes
Administrative distance of a static route has a default value of 1

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 24
Administrative Distance of a Route
 Directly connected routes
-Immediately appear in the routing table as soon as the
interface is configured

ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 25
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 26

You might also like