Industrial Robotics

Unit 6 Industrial Robotics
Sections:
1. Robot Anatomy
2. Robot Control Systems
3. End Effectors
4. Industrial Robot Applications
5. Robot Programming
Industrial Robot Defined
A general-purpose, programmable machine possessing

certain anthropomorphic characteristics
Hazardous work environments

Repetitive work cycle
Consistency and accuracy
Difficult handling task for humans
Multishift operations
Reprogrammable, flexible
Interfaced to other computer systems
Robot Anatomy
Manipulator consists of joints and links Link3

Joint3
Joints provide relative motion
End of Arm
Links are rigid members between joints
Various joint types: linear and rotary
Each joint provides a degree-of- Link2
freedom
Link1
Most robots possess five or six
degrees-of-freedom Joint2
Robot manipulator consists of two
sections: Joint1
Body-and-arm for positioning of Link0
objects in the robot's work volume Base
Wrist assembly for orientation of
objects
Manipulator Joints
Translational motion
Linear joint (type L)
Orthogonal joint (type O)
Rotary motion
Rotational joint (type R)
Twisting joint (type T)
Revolving joint (type V)
Joint Notation Scheme
Uses the joint symbols (L, O, R, T, V) to designate joint

types used to construct robot manipulator
Separates body-and-arm assembly from wrist assembly
using a colon (:)
Example: TLR : TR
Common body-and-arm configurations

Polar Coordinate
Body-and-Arm Assembly
Notation TRL:
Consists of a sliding arm (L joint) actuated relative to the

body, which can rotate about both a vertical axis (T joint)
and horizontal axis (R joint)
Cylindrical Body-and-Arm Assembly
Notation TLO:
Consists of a vertical column,

relative to which an arm
assembly is moved up or down
The arm can be moved in or out
relative to the column
Cartesian Coordinate
Body-and-Arm Assembly
Notation LOO:
Consists of three sliding joints,

two of which are orthogonal
Other names include rectilinear
robot and x-y-z robot
Jointed-Arm Robot
Notation TRR:
SCARA Robot
Notation VRO
SCARA stands for Selectively
Compliant Assembly Robot
Arm
Similar to jointed-arm robot
except that vertical axes are
used for shoulder and elbow
joints to be compliant in
horizontal direction for vertical
insertion tasks
Wrist Configurations
Wrist assembly is attached to end-of-arm

End effector is attached to wrist assembly
Function of wrist assembly is to orient end effector
Body-and-arm determines global position of end
effector
Two or three degrees of freedom:
Roll
Pitch
Yaw
Notation :RRT
Example
Sketch following manipulator configurations

(a) TRT:R, (b) TVR:TR, (c) RR:T.
Solution:
R
R
T T R
R T
R
R V
T T
(a) TRT:R (b) TVR:TR (c) RR:T

Joint Drive Systems
Electric
Uses electric motors to actuate individual joints
Preferred drive system in today's robots
Hydraulic
Uses hydraulic pistons and rotary vane actuators
Noted for their high power and lift capacity
Pneumatic
Typically limited to smaller robots and simple material
transfer applications
Robot Control Systems
Limited sequence control pick-and-place
operations using mechanical stops to set positions
Playback with point-to-point control records
work cycle as a sequence of points, then plays
back the sequence during program execution
Playback with continuous path control greater
memory capacity and/or interpolation capability to
execute paths (in addition to points)
Intelligent control exhibits behavior that makes
it seem intelligent, e.g., responds to sensor inputs,
makes decisions, communicates with humans
Robot Control System
Cell Level 2
Supervisor
Controller Level 1
& Program
Joint 1 Joint 2 Joint 3 Joint 4 Joint 5 Joint 6 Sensors Level 0

End Effectors
The special tooling for a robot that enables it to
perform a specific task
Two types:
Grippers to grasp and manipulate objects (e.g.,
parts) during work cycle
Tools to perform a process, e.g., spot welding,
spray painting
Grippers and Tools
Working Envelope
Industrial Robot Applications
1. Material handling applications

Material transfer pick-and-place, palletizing
Machine loading and/or unloading
2. Processing operations
Welding
Spray coating
Cutting and grinding
3. Assembly and inspection
Robotic Arc-Welding Cell
Robot performs
flux-cored arc
welding (FCAW)
operation at one
workstation while
fitter changes
parts at the other
workstation
Robot Programming
Leadthrough programming
Work cycle is taught to robot by moving the
manipulator through the required motion cycle and
simultaneously entering the program into
controller memory for later playback
Robot programming languages
Textual programming language to enter
commands into robot controller
Simulation and off-line programming
Program is prepared at a remote computer
terminal and downloaded to robot controller for
execution without need for leadthrough methods
Leadthrough Programming
1. Powered leadthrough
Common for point-to-
point robots
Uses teach pendant
2. Manual leadthrough
Convenient for
continuous path control
robots
Human programmer
physical moves
manipulator
Leadthrough Programming
Advantages
Advantages:
Easily learned by shop personnel
Logical way to teach a robot
No computer programming
Disadvantages:
Downtime during programming
Limited programming logic capability
Not compatible with supervisory control
Robot Programming
Textural programming languages

Enhanced sensor capabilities
Improved output capabilities to control external equipment
Program logic
Computations and data processing
Communications with supervisory computers
Coordinate Systems
World coordinate system Tool coordinate system

Motion Commands
MOVE P1
HERE P1 - used during lead through of manipulator
MOVES P1
DMOVE(4, 125)
APPROACH P1, 40 MM
DEPART 40 MM
DEFINE PATH123 = PATH(P1, P2, P3)
MOVE PATH123
SPEED 75
Interlock and Sensor Commands
Interlock Commands
WAIT 20, ON
SIGNAL 10, ON
SIGNAL 10, 6.0
REACT 25, SAFESTOP
Gripper Commands
OPEN
CLOSE
CLOSE 25 MM
CLOSE 2.0 N
Simulation and Off-Line Programming
Example
A robot performs a loading and unloading operation for a

machine tool as follows:
Robot pick up part from conveyor and loads into machine (Time=5.5 sec)
Machining cycle (automatic). (Time=33.0 sec)
Robot retrieves part from machine and deposits to outgoing conveyor.
(Time=4.8 sec)
Robot moves back to pickup position. (Time=1.7 sec)
Every 30 work parts, the cutting tools in the machine are
changed which takes 3.0 minutes. The uptime efficiency of
the robot is 97%; and the uptime efficiency of the machine
tool is 98% which rarely overlap.
Determine the hourly production rate.
Solution
Tc = 5.5 + 33.0 + 4.8 + 1.7 = 45 sec/cycle

Tool change time Ttc = 180 sec/30 pc = 6 sec/pc
Robot uptime ER = 0.97, lost time = 0.03.
Machine tool uptime EM = 0.98, lost time = 0.02.
Total time = Tc + Ttc/30 = 45 + 6 = 51 sec = 0.85 min/pc
Rc = 60/0.85 = 70.59 pc/hr
Accounting for uptime efficiencies,

Rp = 70.59(1.0 - 0.03 - 0.02) = 67.06 pc/hr

Industrial Robotics

Uploaded by

Copyright:

Available Formats

Industrial Robotics

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Industrial Robotics

Uploaded by

Copyright:

Available Formats

Unit 6 Industrial Robotics

A general-purpose, programmable machine possessing

Hazardous work environments

Manipulator consists of joints and links Link3

Uses the joint symbols (L, O, R, T, V) to designate joint

Common body-and-arm configurations

Consists of a sliding arm (L joint) actuated relative to the

Consists of a vertical column,

Consists of three sliding joints,

Wrist assembly is attached to end-of-arm

Sketch following manipulator configurations

(a) TRT:R (b) TVR:TR (c) RR:T

Joint 1 Joint 2 Joint 3 Joint 4 Joint 5 Joint 6 Sensors Level 0

1. Material handling applications

Textural programming languages

World coordinate system Tool coordinate system

A robot performs a loading and unloading operation for a

Tc = 5.5 + 33.0 + 4.8 + 1.7 = 45 sec/cycle

Accounting for uptime efficiencies,

You might also like