4 - Force Acceleration

Kinetics of a Particle:
Force and Acceleration
F = ma
1
Introduction
2
Newtons First Law:The law of inertia
An object at rest will remain its original

state of motion (rest or moving at
constant velocity) if the sum of force is
zero
Newtons Second Law of Motion
If the sum of force is non-zero

Second Law:
A particle acted upon
by an unbalanced
force F experiences an
acceleration a that has
the same direction as
the force and a
magnitude that is
directly proportional to Portrait of Sir Isaac
Newton at aged 46
the force.
5
Mass is a property of matter
W mg
Mass of the body is specified in kilograms
Weight is the force applied to mass due to
gravity
Weight is calculated using the equation of
motion, F = ma
W = mg (N)
(g = 9.81 m/s2)
6
Equation of Motion: Rectangular Coordinates
Procedure for Analysis
1. Select inertial coordinate system:
rectangular or normal/tangential
2. Draw free body diagram (FBD) showing all
external forces applied to the particle.
Resolve forces into components
7
3. Draw kinetic diagram, showing particles
inertia force, ma. Resolve this vector into
its components.
4. Apply equation of motion (F = ma) in

their scalar component form
5. Identify the unknowns in the problem and
solve them
Kinematics
It may be necessary to apply kinematic equations
to generate additional equations.
If acceleration is a function of time, use:
a = dv/dt v v0 act
v = ds/dt 1 2
s s0 v0t act
a ds= v dv 2
v 2 v02 2ac s s0
9
When a particle is moving relative to an inertial x, y, z
frame of reference,
F = ma ;
Fxi + Fyj + Fzk = m(axi + ayj + azk)
The respective i, j, k components on the left side must

equal to the corresponding components on the right
side. Thus, the three scalar equations:
Solve up to 3 scalar unknowns
Fx max
Fy ma y
Fz maz 10
For 2D problem
Solve up to 2 scalar unknowns
System involving many
components
Example 1
The 50-kg crate rests on a horizontal plane

with the coefficient of kinetic friction is k =
0.3. If the crate is subjected to a 400-N
towing force, determine the velocity of the
crate at 3 s starting from rest.
13
Solution Example 1
Draw FBD
14
Solution Example 1
Solution
1. Free-Body Diagram
Weight of the crate is W = mg = 50 (9.81) = 490.5 N.
The frictional force is F = kNC and acts to the left,
There are 2 unknowns, NC and a.
2. Equations of Motion
Fx max ; 400 cos 30 0.3N C 50a

Fy ma y ; N C 490.5 400 sin 30 0
Solving we get N C 290.5 N , a 5.19m / s 2
15
Solution Example 1
Solution
3. Kinematics
Acceleration is constant.
Velocity of the crate in 3s is
v v0 act
0 5.19(3)
15.6m / s
Crates FBD and kinetic diagram

16
Example 2
The baggage truck A has a weight of 3600 N and
tows a 2200 N cart B and a 1300 N cart C. For a
short time the driving force developed at the
wheels is FA = (160t) N where t is in seconds. If the
truck starts from rest, determine its speed in 2
seconds. What is the horizontal force acting on the
coupling between the truck and cart B at this
instant?
17
Example 2
The baggage truck A has a weight of 3600 N and tows a
2200 N cart B and a 1300 N cart C.
FA = (160t) N where t is in seconds.
FBD:
18
Example 2
Solution
We have to consider all 3 vehicles.
Only horizontal motion is considered.

F x max ;
3600 2200 1300
160t a
9.81
a 0.221t
19
Example 2
Solution
3. Kinematics
The velocity of the truck is obtained using a = dv/dt
with the initial condition that v0 = 0 at t = 0,
v 2 22
0 dv 0 (0.221t ) dt; v 0.1105t 0.442m / s
0
1. Free-Body Diagram The force acting on the coupling,T ?
When t = 2 s, then

F x max ;
3600
160(2) T 0.221(2) T 157.8 N
9.81
20
Equations of Motion: Normal and Tangential Coordinates
Equation of motion for the particle may be
written in the tangential and normal
Ft mat
Fn man
Fb 0
21
Procedures for Analysis

Establish the inertial t and n coordinate system
at the particle and draw the particles FBD
Normal acceleration an, always acts in the
positive n direction
Tangential acceleration at is assume in the
positive t direction
Identify the unknowns in the problem
22
Procedures for Analysis

2. Equation of Motion
Apply the equations of motion,
F ma
t t , F n man
3. Kinematics
Formulate at = dv/dt or at = v dv/ds and an = v2/
If the path is defined as y = f(x),

1 dy / dx
2 3/ 2
/ d 2 y / dx2
23
Example 3
Determine the banking angle for the race track
so that the wheels of the racing cars will not have
to depend upon friction to prevent any car from
sliding up or down the track. Assume the cars
have negligible size a mass m, and travel around
the curve of radius with a speed v.
24
Example 3
Solution
1. Free-Body Diagrams
No frictional force acting on the car.
NC represents the resultant of the ground on all four
wheels.
Unknown are NC and .
25
Example 3
Solution
Using the n and b axes,
2
Fn man ;
v
NC sin m

Fb 0; NC cos mg 0
Solving the 2 equations, eliminating NC and m,
v2 v 2
tan tan 1
g g
26
Example 4
Design of the ski requires knowing the type of
forces that will be exerted on the skier and his
approximate trajectory. In the case as shown,
determine the normal force and acceleration on
the 600-N skier the instant he arrives at the end of
jump, A, where his velocity is 9 m/s.
27
Example 4
Solution
1. Free-Body Diagrams
As path is curved, there are an and at
Unknowns are at and NA
2. Equations of Motions
600 9 2
Fn man ; N A 600
9.81
600
Ft mat ; 0 at
9.81
28
Example 4
Solution
2. Equations of Motions
1 2 dy 1 d2y 1
We have y x 15 x ; 2

60 dx 30 dx 30
At x = 0,

1 (dy / dx) 2 3/ 2
30m
2 2
d y / dx
x 0
Thus NA = 765 N
3. Kinematics
v2
With at = 0, an 2.7m / s 2 ; a A an 2.7m / s 2

29

4 - Force Acceleration

Uploaded by

Copyright:

Available Formats

4 - Force Acceleration

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4 - Force Acceleration

Uploaded by

Copyright:

Available Formats

Kinetics of a Particle:

Force and Acceleration

An object at rest will remain its original

If the sum of force is non-zero

4. Apply equation of motion (F = ma) in

The respective i, j, k components on the left side must

The 50-kg crate rests on a horizontal plane

Fx max ; 400 cos 30 0.3N C 50a

Solving we get N C 290.5 N , a 5.19m / s 2

Crates FBD and kinetic diagram

1. Free-Body Diagram The force acting on the coupling,T ?

Procedures for Analysis

Procedures for Analysis

Solving the 2 equations, eliminating NC and m,

You might also like