Abaqus Lecture 1
Abaqus Lecture 1
Abaqus Lecture 1
PROGRAM
GET STARTED
Overview
What
is ABAQUS?
Why learn ABAQUS?
Components of the main Abaqus window .
How to build a simple model.
Examples in 1D and 2D problem's .
Online tutorials .
ABAQUS documentation and online
resources.
What is ABAQUS?
Abaqus
ABAQUS/CAE
Title bar
The
Menu bar
The
Toolbars
The
Context bar
Abaqus
Toolbox area
When
Viewport
Viewports
Prompt area
The
prompt area
Message area
Abaqus/CAE
Results Tree
The
Model Tree
The
WHAT IS A MODULE?
PART
Why we choose 2D ?
Small
NOTE
: Thickness just in 2D .
1m
500 N
1m
I want to know stresses and strains along the x-direction and the forces
and moments in each section of the beam due to a concentrated load.
Note : dont forget Beam Section Orientation from property
assign.
1
1
3
2
Nodes
Elements
5
4
Beam example
y
9 kN
x
Steel beam, Youngs modulus 200x109 Pa , Poisson's ratio 0.29
Length 2.5 m , width = 2.5 cm, height = 5 cm
Beam example
I want to know stresses and strains along
the x-direction and the forces and
moments in each section of the beam due
to a static load.
Toggle on U1 , U2 and U3
since all translational degrees
of freedom need to be
constrained.
Mesh Module
First
A truss problem
1000 N
500 N
20 cm.
x
20 cm.
9
Beam example
I want to know stresses and strains in all
truss segments due to the static loads
shown in the figure.
Online tutorials
ABAQUS CAE has three very good tutorials
:
Simple
3D cantilever beam .
Two hinges/ rigid pin assembly .
Viewing and working with your output .
The results