DSB-B350S Training Manual

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 46

Introducing Samsung Digital Satellite Receiver ( DSB-B350S,R,W,Z,T )

Samsung Electronics Co., LTD. Digital Video Division

1. Product Introduction
General Features
4000 Programmable Channels Advanced Electronic Program Guide 7-Segment LED Display

DiSEqC 1.0 & 1.2 Supported


SCART & RCA Output Automatic and Manual Scan Facility Channel Organising(Programmable) 4 Multi Languages Supported for OSD Supported Scanning FTA and All Channels By Software Selection Individual Channel Lock Facility

Sales Point

2CI / 2 smartcard slots Watch pay TV Channels through CI(Common Interface) Or 2 smartcard for Cryptoworks CAS
Auto Scanning seek out free or pay channels automatically 32 Satellite at one time. 80 transponder satellite is completed in only 4 minutes. User Mode Installing a satellite manually. Enable control of basic positioner function recommended for beginner.

EPG Standard now and next EPG is supported. 7 Day Program information Guide.

Teletext Onboard teletext will please owners of non-teletext TVs, plasma screens and projectors. VBI, OSD Teletext Supported. Channel Sorting Display channels by Favorite, Alphabetical Order, Provider and Transponder.

French English German

Multi-language Subtitle Provide Multi-language subtitle and audio sound track.

Video Track Selection(Multi-Feed) Select the Video tracks when several are transmitted From the broadcasting station. Allow to enjoy the Visuals to see through various camera angle.

Specification
Items Key Features Features PAL Video Format Embedded CA (Conditional Access) Middleware EPG OTA Smart Card Slot CI (Common Interface) Memory Hard Disk(GB) USB IEEE1394 Technical Specification Tuner(Satellite/Cable/Terrestrial/ATSC/NTSC) DiSEqC Frequency Range Loop Through IF Return Channel(Cable modem / Telephone Modem) AV Input Digital Audio Output RF Modulator Output RGB Output DVI Output Output Component Output RCA Output Scart Output S-Video Output 0/12 Volt Output Serial Interface Other Features 1 2 2 1 1 FLASH SDRAM NTSC ATSC 0 0 0 2 2CI 2MB 8MB QPSK 1.2 950~2150MHz O Optical/(Dolby) 0 SCART 2scart O Sub-items Units DSB-B350T

Items Key Features Features Design Tool Color Others Display(7SEG / FLT) Front Key set Other Features

Sub-items

Units

DSB-B350T CREVO silver -

8 1(2 ) 1

STNSDBY/MENU/OK/ 4DIRECTION single(BAT:AAA) SCART Cable -

Remote Control Unit(Battery) RF Cable Scart Cable / RCA Cable Accessory S-Video Cable Optial / Coaxial Cable User Manual Other accessory Power Supply Power Power Consumption Standby Power Dimension (W*H*D) Physical Spec. Weight Loading Quantity(20/40ft) Net Package Net Package

O 100 to 240 VAC, 50 Hz/60 Hz Max. 25 Watts 10 Watts

inch inch Kg Kg

351 x 60 x 226 mm(W x H xD) 1.9Kg for Europe

Option Product Specification

Description of Front Panel (DSB-B350S,R,Z,T)

Description of Front Panel (DSB-B350W)

Description of Rear Panel

2. Circuit Descriptions
Block Diagrams

<Overall Diagram>

SDRAM(16MB) DESCRIPTION
The Hynix HY57V281620HC(L/S)T is a 134,217,728bit CMOS Synchronous DRAM, ideally suited for the main memory applications which require large memory density and high bandwidth. All inputs and outputs are synchronized with the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth.

FEATURES
Single 3.30.3V power supply All device pins are compatible with LVTTL interface JEDEC standard 400mil 54pin TSOP-II with 0.8mm of pin pitch All inputs and outputs referenced to positive edge of system clock Data mask function by UDQM or LDQM Internal four banks operation Auto refresh and self refresh 4096 refresh cycles / 64ms Programmable Burst Length and Burst Type - 1, 2, 4, 8 or Full page for Sequential Burst - 1, 2, 4 or 8 for Interleave Burst

Tuner(BS2S7VZ0302)
DIGITAL DBS FRONT-END UNITS BS front-end unit for digital broadcasting features high quality of signal transmission and improved elimination ability of various kinds of rejection thanks to using Sharps original ICs.

<Block diagram of Tuner >

CPU(CX24143-14A) Features
- MPEG-2 MP@ML Video Decoder

- MPEG-1, MPEG-2 Audio Decoder


- Dolby Digital Decoder - Multi-standard, Multi-stream Transport De-multiplexing - 32-bit ARM920T Main System CPU - Conditional Access System Support - OSD/Graphics Plane Display

<System

Diagram>

<Block

Diagram>

IC card interface(TDA8004A)

GENERAL DESCRIPTION
The TDA8004AT is a complete low cost analog interface for asynchronous 3 or 5 V smart cards. It can be placed between the card and the microcontroller with very few external components to perform all supply protection and control functions.

FEATURES
3 or 5 V supply for the IC (GND and VDD) Step-up converter for VCC generation (separately powered with a 5 V 10% supply, VDDP and PGND) 3 specific protected half duplex bidirectional buffered I/O lines (C4, C7 and C8)

APPLICATIONS
IC card readers for banking Electronic payment Identification Pay TV.

FLASH(AT49BV162AT)

Description
The AT49BV162A(T) is a 2.7-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each or 2,097,152 bytes of 8 bits each. The x16 data appears on I/O0 - I/O15; the x8 data appears on I/O0 - I/O7. The memory is divided into 71 sectors for erase operations. The device is offered in a 48-lead TSOP and a 48-ball CBGA package. The device has CE and OE control signals to avoid any bus contention.

Features
Single Voltage Read/Write Operation: 2.65V to 3.6V Access Time 70 ns Fast Word Program Time 12 s Fast Sector Erase Time 300 ms VPP Pin for Write Protection RESET Input for Device Initialization Sector Lockdown Support TSOP and CBGA Package Options Top or Bottom Boot Block Configuration Available 128-bit Protection Register Minimum 100,000 Erase Cycles Common Flash Interface (CFI)

VIDEO SWITCH(74HC4053) Description


The HC4053 is a triple two channel multiplexer demultiplexer having three separate digital control inputs A, B and C to select independently one of a pair of channles.

<U1 Video Decoder>

RS 232C(ILX232) Description
Interface transceiver of RS-232 standard ILX232-3.3 with one supply voltage IC ILX232-3.3 is purposed for application in high-performance information processing systems and control devices of wide application. Input voltage levels are compatible with standard MOS levels. . . . . . Output voltage levels are compatible with input levels of K-MOS, N-MOS and TTL integrated circuits. Supply voltage : 3.3V Output current 24 mA. Latching current not less than 450 mA at = 25 Tolerable value of static potential not less than 2000V

Wiring Diagram

Schematic Diagram

<Tuner & LNBP>

<CX2414X Demodulator & A/V>

<CX2414X Flash/Tuner IF>

<CX2414X SDRAM>

<CX2414X Communication I/O>

<CX2414X Power>

<Audio Interface>

<SCART, RCA, Modulator Output>

<Smart Card Interface>

<S-Video Interface>

<SMPS Interface>

<Front Interface>

3. Disassembly and Reassembly Exploded view


DSB-B350S consists of Main Assy, SMPS Module Assy, Top Cabinet, Bottom Chassis, Front Panel Assy with Function-Key Assy.

Top Cabinet Removal

Assy Front-Cabinet Removal

Assy Front-PCB Removal

Main PCB and SMPS PCB Removal(1)

Main PCB and SMPS PCB Removal(2)

4. Troubleshooting

5. Software Upgrade

You might also like