Hydraulic Jump

Unit III Rapidly Varied Flows
Hydraulic Jump- Define

The hydraulic jump is the phenomenon that occurs where there is an abrupt transition from super critical flow to sub critical flow. The most important factor that affects the hydraulic jump is the Froude number.
The most typical cases for the location of hydraulic jump are:
Jump below a sluice gate. Jump at the toe of a spillway. Jump at a glacis. (glacis is the name given to sloping floors provided in hydraulic structures.)
Example
Jump below a sluice gate
Jump at a glacis
Jump at the toe of a spillway
Hydraulic Jump- Assumption

General Expression for Hydraulic Jump:
In the analysis of hydraulic jumps, the following assumptions are made: The length of hydraulic jump is small. Consequently, the loss of head due to friction is negligible. The flow is uniform and pressure distribution is due to hydrostatic before and after the jump. The slope of the bed of the channel is very small, so that the component of the weight of the fluid in the direction of the flow is neglected.
Q2 Q2 A1 y1 A2 y2 gA1 gA2
Comments: This is the general equation governing the hydraulic jump for any shape of
channel.
The sum of two terms is called specific force (M). So, the equation can be written as: M1 = M2 This equation shows that the specific force before the hydraulic jump is equal to that after the jump.
Classification of the Jump

The hydraulic jump can be classified based on initial Froude number as Undular Weak Oscillating Steady Strong (F1 = 1.0 1.7) (F1 = 1.7 2.5) (F1 = 2.5 4.5) (F1 = 4.5 9.0), and (F1 > 9.0)

Type of Jump
Froude Number Remarks
Undular jump
Weak jump
1 < F1 <1.7
1.7 < F1 < 2.5
Undulations on the surface.

Uniform Velocity Energy Loss - small Small rollers, No baffles D/S Water Surface - Smooth. Water Oscillates back and forth from the bottom to the surface. Position, is sensitive to variation of Tail Water, Efficiency is 45 to 70 %. Efficiency is 85 %
Oscillating Jump Steady Jump
2.5 < F1 < 4.5 4.5 < F1 < 9.0
Strong Jump
F1 > 9.0
Applications of the Hydraulic Jump
Define: Surge
A surge is a moving wave front which results in an abrupt change of the depth of flow. It is a rapidly varied unsteady flow condition Two Types Positive which results in an increase depth of flow Negative Which results in decrease depth of flow
Positive surge
Type A Positive surge (Advancing Downstream) Ex: Head Gate is opened suddenly.
Type B Positive surge (Advancing Upstream) Ex: Tail gate closed suddenly.
Negative Surge
Type C Negative Surge (Retreating Downstream) Ex: Head Gate is closed suddenly.
Type D Negative Surge (Retreating Upstream) Ex: Tail gate opened suddenly.
Assumptions
Channel is horizontal and frictionless; Pressure distribution is hydrostatic at locations away from the front; Velocity is uniform within the cross section, at location away from the front; Change in the flow depth at the front occurs over a very short distance; Water surfaces behind and ahead of the wave front are parallel to the bed.
Case A: Surge due to sudden in crease of flow
For example, consider the movement of a positive surge wave in x-direction in an open channel having an irregular cross section. Here, as the surge moves with an absolute velocity, Vw, flow depth becomes equal to y2 behind the surge. Undistributed flow depth ahead of the surge is y1. The corresponding flow velocities behind and ahead of the slope front are V2 and V1 respectively. The surge has been created due to a sudden change of flow rate from Q1 to Q2.
Surge due to sudden in crease of flow

Absolute Velocity of Surge Wave
To make it to steady flow , apply Vw in opposite direction to V1 and V2 and the surge.
(1)
(2)
(3)
(4)
Applying momentum equation to the control volume of Fig

(5)
(6)
Sub Eq. 2 in Eq. 6 (7)
Sub Eq. 3 in Eq. 7 and subsequent simplification leads to
(8)
(9)
(10)
Now, substitution of Eq. (4) in Eq. (7) and subsequent simplification leads to
(11) Equations (10) and (11) can be used to determine the surge wave velocity and the surge height, if we know the values of undisturbed flow depth, y1, flow rate before the surge, Q1, and the flow rate after the surge, Q2. Equations (10) and (11) are non-linear equations. They can be solved by an appropriate numerical technique. For rectangular channels, Eqs. (10) and (11) simplify to the following.
(12)
(13)

Hydraulic Jump

Uploaded by

Copyright:

Available Formats

Hydraulic Jump

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hydraulic Jump

Uploaded by

Copyright:

Available Formats

Unit III Rapidly Varied Flows

Hydraulic Jump- Define

Jump below a sluice gate

Jump at the toe of a spillway

Hydraulic Jump- Assumption

Classification of the Jump

Classification of the Jump

Undulations on the surface.

Oscillating Jump Steady Jump

2.5 < F1 < 4.5 4.5 < F1 < 9.0

Classification of the Jump

Applications of the Hydraulic Jump

Case A: Surge due to sudden in crease of flow

Surge due to sudden in crease of flow

Applying momentum equation to the control volume of Fig

Sub Eq. 2 in Eq. 6 (7)

Sub Eq. 3 in Eq. 7 and subsequent simplification leads to

You might also like