m86!01!8086 8088 Adv Microprocessor Trainer Led Ver

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

MICROPROCESSOR LAB

.....a total solution for Educational Lab Trainers

M86-01 8086 Microprocessor Trainer Kit

M86-01 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface. Features 5 Bytes of EPROM with 16K bytes 16K of Battery Backup RAM. 5 I/O Lines, Three Channel 72 Timer/Counter, PC Serial Interface using USART, Interrupt Controller. 5 Segment Display with 28 Keys Seven Hex Keypad. 5 Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Register. 5 Uploading & Downloading to and from PC in Windows98/XP/NT. 5 Power Supply. In-Built

! On-board sockets provided to facilitate the use of 8087 Co-processor and 8089 I/O Processor ! 16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB. ! 16K bytes of powerful monitor EPROM using two nos. of 27512 ! 72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series. ! 16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector. ! RS-232C interface using 8251 brought out at 9 Pins D-Type Connector. ! On-board Interrupt controller using 8259 brought out at 20 Pins FRC Connector. ! 28 keys hexadecimal keyboard and eight seven segment display using 8279 ! Two modes of operation: ! Keyboard Mode ! Serial Mode ! Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode. ! Facility for Downloading/Uploading files from/to PC. ! All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series. ! All ICS are mounted on IC Sockets. ! Bare board Tested Glass Epoxy SMOBC PCB is used. ! In-Built Power Supply of +5V/2A, 12V/250mA ! Attractive Wooden enclosures of Light weight Australian Pine Wood. ! User's Manual with sample programs. ! 315mm x 245mm x 105mm (L x W x H). ! Weight 3 Kgs.

Optional
! PRINTER INTERFACE to interface with DOT MATRIX Printer ! On-board EPROM Programmer for 2732/2764/27256

Specifications
! 8086/8088 CPU operating at 2.5/5MHz ! 8086 Processor can be replaced by 8088 Processor

Note : Specifications can be altered without notice in our constant efforts for improvement.

Kitek Technologies Pvt. Ltd., B-4, Lotus C.H.S., Plot No. 8, Sector - 7, Airoli, Navi Mumbai - 400708. Tel.: 65116548 u : 27694323 u [email protected] u www.kitektechnologies.com Telefax Email: Web :

You might also like