SLO-SYN KS Series High Torque AC Synchronous Motors

SERVO CONTROLS

STEPPER CONTROLS

VOLTAGE CONDITIONING

ENGINEERING SYSTEMS

AC/DC DRIVES

SLO-SYN KS Series High Tor

Features
NEMA 23 torque rating 80-185 ounceinches (56 to 131 Ncm) NEMA 34 torque rating 240-700 ounceinches (169 to 494 Ncm) High power - allows use of a smaller motor Smooth, quiet operation Rugged construction to provide long life Start, stop or reverse within 1 cycles of the applied frequency
Superior Electric SLO-SYN long recognized as the leader in slow speed synchronous motor technology, has achieved new levels of performance with its KS Series of AC Synchronous Motors. Utilizing the latest in design and magnetic technologies, the KS Series produces double the torque of their predecessors. This achievement allows the user to reduce the size and weight of the motor, increase system performance, improve productivity, and reduce cost. The KS Series is available with 12 inch leads or a terminal box in six sizes to meet all or your AC Synchronous Motor System needs. Produced in an ISO9001 environment, these high technology AC Synchronous Motors are backed with the quality and reliability of a company known for performance and value, since 1938.

Operated from single-phase power sources using phase-shifting network Impedance protected, can be stalled without damage Starts higher inertial loads Offered with leads or terminal box Rear shafts available Gearmotors available CE compliant motors available

Magnet Rot otor Permanent Magnet Rotor Ground Ground Scre Screw Included Brushless Brushless Robust Design Design ugged Square Fr Rugged Square Frame onstruction Construction
2

303 Stainle ainless Stainless Steel Shaft Steel

Double Shielded Ball Bearings

rque AC Synchronous Motors

120 Volt, 60 Hz, Single Phase, 72 RPM
Torque *Type Number oz-in KSL061T1Y 80 60 Series KSL062T1Y 140 KSL063T1Y 185 90 Series KSL091T1Y KSL092T1Y KSL093T1Y 240 450 700 (min) Load Inertia Ncm Lb-In 2 Kg-cm 2 56 0.5 1.5 99 2.0 5.9 131 4.0 12 169 318 494 4.0 8.0 13 12 23 38 Wiring Amps Diagram 0.25 R/C 0.35 R/C 0.40 R/C 0.50 0.60 1.00 R/C R/C R/C

Phase Shifting Components

Resistor Kit Kit Number Ohm 201052-033 1,000 201052-035 600 201052-049 400 201052-037 201052-041 201052-027 300 250 150 Watt 12 25 50 50 50 100 Capacitor (240 Kit Number 201053-038 201053-044 201053-076 201053-076 201053-069 201053-074 VAC) F 2 3 5 5 6 11

240 Volt, 60 Hz, Single Phase, 72 RPM

Torque (min) Load Inertia *Type Number oz-in Ncm Lb-In 2 Kg-cm 2 KSL062T2Y 140 99 2.3 6.7 60 Series KSL063T2Y 185 131 2.6 7.6 KSL091T2Y 240 169 4 12 90 Series KSL092T2Y KSL093T2Y 450 700 318 494 9 14 26 41

Phase Shifting Components

Capacitor (370 VAC) Kit Number 201053-063 201053-063 201053-070 201053-072 201053-073 F 0.75 0.75 1.0 2.0 3.0

Wiring Resistor Kit (includes 2 if required) Amps Diagram Kit Number Ohm Watt 0.15 R/R/C 201052-036 1,100 25 0.20 R/R/C 201052-050 1000 25 0.25 R/R/C 201052-039 900 50 0.35 0.50 R/C R/C 201052-045 201052-047 1,000 600 100 100

240 Volt, 50 Hz, Single Phase, 60 RPM

Phase Shifting Components

60 Series

Torque (min) Load Inertia Wiring Resistor Kit (includes 2 Resistors) Capacitor (370 VAC) *Type Number oz-in Ncm Lb-In 2 Kg-cm 2 Amps Diagram Kit Number Ohm Watt Kit Number F KSL062T2Y 140 99 2.3 6.7 0.15 R/R/C 201052-036 1,100 25 201053-063 0.75 KSL063T2Y KSL091T2Y KSL092T2Y KSL093T2Y 185 240 450 700 131 169 318 494 2.6 4.5 8 14 7.6 13 23 41 0.20 0.25 0.35 0.50 R/R/C R/R/C R/R/C R/R/C 201052-050 201052-039 201052-043 201052-046 1000 900 600 400 25 50 50 100 201053-070 201053-075 201053-071 201053-073 1.0 1.5 1.75 3.0

90 Series

* To order a motor with a rear shaft extension, add E to the end of the type number. Example: KSL061T1YE. To order a motor with a terminal box, change KSL to KST. Example: KST061T1Y To order a gearmotor (90 series only), add G and desired ratio to the end of the type number. Example: KST091T2YG20. To order a motor that is CE compliant insert C after L or T. Example KSTC091T2Y. This is the maximum rigidly attached load inertia the motor will reliably start. If the load is attached to the motor with a coupling that has a 5 flex, the motor can start loads up to seven times listed.

Specifications
Voltage: ---------------- 120VAC or 240VAC 5% Enclosure Rating: ------------------------------ IP42 Insulation Rating: -------------------------- Class B Temperature: Operating: ---- -40 to 140F (-40 to 60C) Storage: ----- -40 to 266F (-40 to 130C) Humidity: ---------------- 5-95% non-condensing Altitude: ------------------------- 30,000 ft. (9100m)
3

Wiring Diagrams

Gearmotors
SLO-SYN AC Gearmotors mate SLO-SYN 90 series Synchronous Motors with step-down gearboxes for applications where slow shaft speeds or high torque are needed. The rugged gearbox developed for SLO-SYN AC Gearmotors has been designed to allow high output torque ratings, while providing long life. The gearmotors are permanently lubricated and no scheduled maintenance is needed. The gearbox is rated for 5000 ounce-inches (3531 Ncm) maximum output torque. Gearbox efficiency is 68% to 88%, depending on the number of stages. The output shaft of the gear assembly is slotted to accept a standard Woodruff key (supplied) for easy and positive coupling to the load. Nineteen ratios from 3:1 to 125:1 are offered. Gearbox Data Up to 5000 ounce-inches (3531 Ncm) torque Ratios from 3:1 to 125:1 Efficiency to 88% Maintenance free Long operating life 150 lb (68 kg) radial load capacity 100 lb (45.4 kg) axial load capacity Typical output shaft backlash is 2 Note: Gearboxes for 93 motors must be installed at the factory. Torque Multiplier (Max Torque 5000 oz-in) 2.64 3.52 4.4 6.93 9.24 11.55 12.32 15.4 19.25 18.36 24.48 30.6 32.64 40.8 43.52 51 54.4 68 85 Typical Input Shaft Lost Motion 6 7 8 43 61 81 58 65 73 109 110 112 113 115 116 118 119 124 130 Reflected Moment Of Inertia Lb-In2 (kg-cm2) 0.105 (3.09 x 10-5) 0.035 (1.02 x 10-5) 0.021 (6.2 x 10-6) 0.115 (3.37 x 10-5) 0.041 (1.19 x 10-5) 0.024 (7.1 x 10-6) 0.037 (1.08 x 10-5) 0.023 (6.6 x 10-6) 0.022 (6.4 x 10-6) 0.114 (3.35 x 10-5) 0.041 (1.19 x 10-5) 0.024 (7.1 x 10-6) 0.037 (1.08 x 10-5) 0.023 (6.6 x 10-6) 0.037 (1.08 x 10-5) 0.022 (6.4 x 10-6) 0.023 (6.6 x 10-6) 0.022 (6.4 x 10-6) 0.022 (6.4 x 10-6)

Gearbox G Ratio 3:1 4:1 5:1 9:1 12:1 15:1 16:1 20:1 25:1 27:1 36:1 45:1 48:1 60:1 64:1 75:1 80:1 100:1 125:1

Part Number 220763-003 220763-004 220763-005 220763-009 220763-012 220763-015 220763-016 220763-020 220763-025 220763-027 220763-036 220763-045 220763-048 220763-060 220763-064 220763-075 220763-080 220763-100 220763-125

Efficiency 88% 88% 88% 88% 77% 77% 77% 77% 77% 68% 68% 68% 68% 68% 68% 68% 68% 68% 68%

Dimensional Drawings
Series With 60 Series With Leads

Dimensions are shown in inches(mm)

Series With 90 Series With Leads

SHAFT DIMENSIONS MOTOR B C SERIES DIA. FLAT 91 & 92 .3750[9.525] .328[8.33] 93 .5000[12.70] .450[11.43]

Series With Terminal Box 60 & 90 Series With Terminal Box

Gearmotor ors Series only) Gearmotors (90 Series only)

* For KST series motors add 1.33 [33.79] to Dimenion A.

Distribution Coast-To-Coast and International

Superior Electric, is a global leader in the engineering, manufacturing, and marketing of precision motion and control products for industrial applications. All SLO-SYN step motors, servo motors and controls are backed by highly specialized engineers and service people who can help solve your production challenges. Superior Electrics capabilities and products have improved operations for companies around the world. Through an extensive authorized distributor network, Superior Electric products are available worldwide. These distributors provide convenient services by offering technical support, replacement parts, and literature, as well as an extensive inventory of models off-the-shelf for the fastest possible delivery. Call Superior Electric customer service for ordering and application information or for the address of the nearest authorized distributor for Superior Electric products.

In U.S.A. and Canada

Customer Service: 1-800-787-3532 Product Application: 1-800-787-3532 Product Literature Request: 1-800-787-3532 Fax: 1-800-766-6366

In Europe
Warner Electric (Int.) Inc. La Pierreire CH-1029 Villars-Ste-Croix, Switzerland Tel: 41 21 631 33 55 Fax: 41 21 636 07 04

Superior Electric

SLO-SYN Step/Servo Motors and Controls POWERSTAT Variable Transformers SUPERCON Electrical Connectors BRONCO AC and DC Drives NEXTDRIVE Adjustable Frequency Drives

LUXTROL Lighting Controls STABILINE Power Protection Products 5-WAY Binding Posts SECO Adjustable Speed Drives

Superior Engineered Integrator of Superior Electric, and Warner Linear components as well as Systems components of other manufacturers into complete motion control/drive system
solutions.

Web Site: www.superiorelectric.com

383 Middle Street Bristol, CT 06010 USA Tel: 860.585.4500 Fax: 860.584.1483

Warner Engineered Systems

13500-J South Point Blvd. Charlotte, NC 28273 Tel: 704.588.5693 Fax: 704.588.5695
SL4004-1 8/00 1999 Superior Electric Printed in U.S.A.