Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    Hanbell Spec Sheet RC2-340B-1

    Uploaded by

    DHINAKARAN Kumar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hanbell Spec Sheet RC2-340B-1

    Uploaded by

    DHINAKARAN Kumar
    1 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views1 page

    Hanbell Spec Sheet RC2-340B-1

    Uploaded by

    DHINAKARAN Kumar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    RC2-340B Screw Compressor

    Specifications Displacement

    Rated Speed
    CFM

    Rpm
    60 Hz

    60 Hz
    240

    3550

    Volume Ratio Vi 2.6 (standard other Vi available)

    Compressor Nominal Hp 121 Hp at 60 Hz

    35%,50%,75% & 100% Step Capacity Control,


    Capacity Control %
    50%~100% Continuous Stepless Capacity Controls

    Lubrication Differential Pressure Feed Lubricant

    Type 3 Phase, 2 Pole, Squirrel Cage, Induction Motor

    Motor Insulation Class F

    Protection 3 PTC Protection 1 per winding

    Lubricant Charge Gallons 4.2

    Oil Heater Watts 150


    2
    Hydrostatic Pressure test lb/in G 597

    Weight Pounds 1367 Comp. (skid 61x32x35— Crated weight 1764)

    Standard Compressors Accessories Ports


    • Modulating Slide Capacity • Oil Level Float Switch • External Oil Cooler
    • Weather Proof Terminal Box for outdoor • Suction Filter • Liquid Injection (into screw chamber)
    applications • Oil Filter • Economizer
    • 115/1/60 Control Voltage • PSI Relief Valve • Suction, Discharge & Oil Service
    • 115/1/60 Crankcase heater • Oil Sight Glass
    • Horizonal Discharge Check Valve • PT1000 for Reading Motor Temp
    • Discharge Service Valve (Discharge Stop • INT69HBY supporting motor and
    Valve) with standard connection sizes and discharge (PTC) temperature sensor
    supplied with flanges and bushings protection as well as Phase Loss and
    • Suction Service Valve (Suction Stop Phase Reversal at Start Up Only
    Valves) with standard connection sizes
    and supplied with flanges and bushings

    Connections Discharge Stop Valve 2 1/2”

    Horizonal Discharge
    2 1/2”
    Check Valve

    Suction Stop Valve 4”

    Economizer 7/8” solder

    Liquid Injection (chamber) 5/8” flare A B C D E


    Discharge Side Copper Pipe Sizing 2 5/8” 2.36” 4.33” 1.38” 2.63” 3.03”

    Suction Side Copper Pipe Sizing 4 1/8” 2.99” 5.71” 1.97” 4.14” 4.57”

    MCC & LRA R22, R407C, R404A, R507A, R134a

    Maximum Y- Part Wind Start


    Hertz Volts Continuous Locked Rotor Locked Rotor Locked Rotor Locked Rotor
    Current Amps (Y) Amps (D) Amps (D) Amps (DD)

    60 220 457 662 1985 1342 2065

    60 460 218 360 1080 640 985

    Revision -2020-07-09

    You might also like