Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    TASCAM-dp-004_update instructions

    Uploaded by

    exacto.mg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TASCAM-dp-004_update instructions

    Uploaded by

    exacto.mg
    1 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views1 page

    TASCAM-dp-004_update instructions

    Uploaded by

    exacto.mg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DP-004 Release Notes

    Confirmation of firmware version


    Confirm the firmware version of your DP-004 before
    conducting a firmware update.
    1 Turn the unit’s power ON.
    2 Press the MENU key to open the MENU screen,
    select "INFORMATION" and press the F4 (¥)
    key.
    3 When the INFORMATION screen appears,
    press F4 (NEXT) three times so the screen
    changes to F/W (4/4) to confirm the
    "System Version".
    You do not need to update the unit’s firmware if
    the version shown is the same as or newer than the
    version that you intend to use for the update.

    Firmware update procedures


    CAUTION • The screen shown is an example. The actual display
    When you updated the firmware, make sure that the differs.
    batteries have enough remaining power or use an optional
    AC adapter (PS-P520). The program has been set so that CAUTION
    the update will not be conducted if battery power is If this screen does not appear, turn the power OFF. Then
    insufficient. while pressing and holding both the REPEAT and UN/REDO
    keys, turn the unit’s power ON again. Continue to press
    1 Download the most recent firmware from the and hold the REPEAT and UN/REDO keys firmly until this
    TASCAM web site (http://www.tascam.com). screen appears.

    2 Turn the unit’s power ON and use the included 6 Select the firmware (highlight the item) using
    USB cable to connect it with a computer. This F1 (§) and F2 (¶), then press F4 (NEXT). The
    unit will be recognized as an external drive following screen appears.
    (external storage device) by the computer.
    3 Copy the downloaded firmware to the
    UTILITY folder on the DP-004.
    4 After copying has completed, disconnect the
    unit from the computer following the correct
    procedures, remove the USB cable and turn the
    unit power OFF.
    The current version appears on the left and the
    5 While pressing and holding both the REPEAT updated version appears on the right.
    and UN/REDO keys, turn the unit power ON.
    NOTE
    The unit starts up in update mode, and the update file The screen shown is an example. The actual display differs.
    appears on the screen.
    7 Press the F3 (YES) key to start the update.
    8 When the update is complete, the power turns
    OFF automatically. Turn the power ON again.
    9 Follow the “Confirmation of firmware version”
    instructions above to check that the “System
    Version” is now the most recent version of the
    firmware.
    NOTE
    • This screen shows a list of the firmware update files This completes the procedure for updating this unit.
    inside the UTILITY folder of the unit. “No Update File”
    appears if there is no update file in the UTILITY folder. 10 Connect to a computer with USB and delete
    the firmware update from the unit’s UTILITY
    folder.

    2 TASCAM DP-004 Printed in China

    E_DP-004_RN_RevB.indd 2 09.2.6 10:08:11 AM

    You might also like