Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    PWM Installation Instructions

    Uploaded by

    Ruben Sacco

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PWM Installation Instructions

    Uploaded by

    Ruben Sacco
    1 views2 pages

    Original Title

    PWM Installation instructions

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views2 pages

    PWM Installation Instructions

    Uploaded by

    Ruben Sacco

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INSTALLATION INSTRUCTIONS

    Proportional Flow Control Valves


    The DICKEY-john proportional flow control valves are priority-type flow
    regulators providing pressure-compensated, regulated, and bypass flow.

    Features:
    • 4 gpm (p/n 46709-2004); 8 gpm (p/n 46709-2008); and 24 gpm
    (46709-2050)
    • Solenoid operated
    • Electrically variable
    • Three port
    • Pressure compensated spool type
    • Normally closed when de-energized
    • Regulated flow rate 0-15 lpm (0-4 gpm), 0-30 lpm (0-8 gpm), and 0-90
    lpm (0-24 gpm)
    • Reverse free flow cracking pressure (1-1.4 bar) 15-20 psi
    • Internal leakage 0.38 lpm (0.10 gpm) at zero current

    Ratings:

    Operating Pressure:
    Port 1 Inlet 240 bar (3500 psi)
    Port 2 Bypass 207 bar (3000 psi)
    Port 3 Regulated 207 bar (3000 psi)

    Electrical:
    Coil Voltage: 12 VDC
    Threshold Current: 300 +/- 100 mA
    Maximum Control Current: 1600 +/- 100 mA

    A spacer plate fabricated by the user is recommended to mount between the


    valve and the mounting surface. A clearance of .25 inches between the valve
    and mounting surface is recommended.

    Spacer Plate not supplied by Recommended


    DICKEY-john. clearance .25 in

    NOTE: Most DICKEY-john control


    systems require an external
    proportional valve driver.

    For assistance, contact DICKEY-john


    Technical Support at 1-800-637-3302.

    Proportional Flow Control Valves ©2008 DICKEY-john Corporation


    11001-1502-200811 Specifications subject to change without notice.
    INSTALLATION INSTRUCTIONS

    Low Pressure
    Hydraulic
    Drive Motor

    High Pressure

    Port 2
    Bypass
    to Tank OIL
    Port 3 Reservoir TANK
    Regulated

    NOTE: Port 1
    Inlet from

    Low Pressure
    Valves can also be used as a
    restrictive-type, 2-way, Hydraulic
    pressure-compensated flow Pump
    regulator when the bypass line
    port 2 is blocked.

    Fixed
    Displacement
    Pump

    MAIN
    High Pressure PUMP

    OPERATION:

    USASI/ISO: Valves regulate flow out of port 3 regardless of system working pressure. With
    increasing current to the solenoid, output flow increases.

    When used as a bypass flow control in applications where the priority flow port
    is blocked by external valving, bypass pressure drop increases unless a small
    amount of leakage is provided for the priority port.

    Manual Override:
    • To engage, turn clockwise approximately 1 turn to reach start point.
    • Continue approximately 5 more turns to full shift.
    • To disengage, turn counterclockwise 6 turns to positive stop.

    Proportional Flow Control Valves ©2008 DICKEY-john Corporation


    11001-1502-200811 Specifications subject to change without notice.

    You might also like