E-18 FluxameshFilterCartridge
E-18 FluxameshFilterCartridge
E-18 FluxameshFilterCartridge
Leaflet E-18-01-UK
FLUXAMESH
STAINLESS
STEEL
WIRE MESH
FILTER
CARTRIDGES
PWP 75 I S 20 3 E
(1)
CONSTRUCTION SEALING LENGTH L GASKET
PMS Cylindrical END CAP/MESH 4 4” (100 mm) MATERIAL
PWP Pleated I Epoxy bonding 10 10” (250 mm) E EPDM
C Calking 20 20” (500 mm) S SILICONE
(without bonding) 30 30” (750 mm) N BUNA N
SA Argo welding 40 40” (1000mm) V VITON
P Polypropylene support P PTFE
(1)
FILTRATION END CONFIGURATION
RATING µ CODE Without
10 10 ELEMENT MATERIAL Symbol DOE
15 15 Without AISI 304 3 CODE 3 (222)
25 25 Symbol 7 CODE 7 (226)
40 40 S AISI 316 8 CODE 8 (222)
75 75 6 1” GAS M
100 100 R UPON REQUEST
150 150
250 250
350 350
500 500
1000 1000
TECHNICAL SPECIFICATIONS
(2)
NOMINAL MAXIMUM FLOW RATE IN L/H OF WATER
FILTRATION FOR A 10’’ CLEAN FILTER CARTRIDGE
RATING WITH ∆P LESS THAN 0,15 BAR
PMS PWP
10 1.500 1.800
25 2.000 2.500
40 2.500 2.500
FLOW RATE WITH HIGH
75 2.500 2.500 VISCOSITY LIQUIDS
150 3.000 3.000
250 3.000 3.500
500 3.000 3.500 Flow rate refers to water with viscosity 1 cPs.
1000 3.000 3.500 Viscosity affects pressure drop, to know flow rate at a
viscosity other than 1 cPs. contact Fluxa Filtri S.p.A.
(2) Flow rate refers only to filter elements’ pressure drop with water.
Because of the variables involved in pressure drop value
determination (vessel, type of cartridges, connections, fluids)
contact Fluxa Filtri for the proper sizing.
MAX DIFFERENTIAL PRESSURE
2
FILTRATION AREA cm
LENGTH PMS PWP
4” 200 500
10” 500 1.600
20” 1.000 3.200
30” 1.500 4.800
40” 2.000 6.400