COMPUTER WITH STUDIES

Introduction to Computer
Computer
A computer is an electronic device, operating under the control of instructions stored
in its own memory that can accept data (input), process the data according to specified
rules, produce information (output), and store the information for future use
1. Functionalities of a computer

2. Any digital computer carries out

five functions in gross terms:

Computer Components
Any kind of computers consists of HARDWARE AND SOFTWARE.

Hardware:
Computer hardware is the collection of physical elements that constitutes a computer

system. Computer hardware refers to the physical parts or components of a computer

such as the monitor, mouse, keyboard, computer data storage, hard drive disk (HDD),

system unit (graphic cards, sound cards, memory, motherboard and chips), etc. all of

which are physical objects that can be touched.3

1 Vermaat, Misty E. Microsoft Office 2013 Introductory. Cengage Learning, p.IT3. 2014

2 http://www.tutorialspoint.com/computer_fundamentals/computer_quick_guide.htm

3 http://en.wikipedia.org/wiki/Computer_hardware

1. Input Devices
Input device is any peripheral (piece of computer hardware equipment to provide data

and control signals to an information processing system such as a computer or other

information appliance.

Input device Translate data from form that humans understand to one that the computer

can work with. Most common are keyboard and mouse

Example of Input Devices:-

1. Keyboard

2. Mouse (pointing device)

3. Microphone

4. Touch screen

5. Scanner

6. Webcam

7. Touchpads

8. MIDI keyboard

9.Trafic input

10. Graphics Tablets

11. Cameras

12. Pen Input

13. Video Capture Hardware

14. Microphone

15. Trackballs

16. Barcode reader

17. Digital camera

18. Joystick

19. Gamepad

20. Electronic Whiteboard

21.Note: The most common use keyboard is the QWERTY keyboard. Generally standard
Keyboard

2. Central Processing

Central Processing Unit (CPU)

A CPU is brain of a computer. It is responsible for all functions and processes.
Regarding computing power, the CPU is the most important element of a computer
system.
The CPU is comprised of three main parts :
* Arithmetic Logic Unit (ALU): Executes all arithmetic and logical operations.
Arithmetic calculations like as addition, subtraction, multiplication and division.
Logical operation like compare numbers, letters, or special characters
* Control Unit (CU): controls and co-ordinates computer components.
1. Read the code for the next instruction to be executed.
2. Increment the program counter so it points to the next instruction.
3. Read whatever data the instruction requires from cells in memory.
4. Provide the necessary data to an ALU or register.
5. If the instruction requires an ALU or specialized hardware to complete, instruct
the hardware to perform the requested operation.
* Registers :Stores the data that is to be executed next, "very fast storage area".
Primary Memory:-
1. RAM: Random Access Memory (RAM) is a memory scheme within the computer

system responsible for storing data on a temporary basis, so that it can be promptly

accessed by the processor as and when needed. It is volatile in nature, which means

that data will be erased once supply to the storage device is turned off. RAM stores

data randomly and the processor accesses these data randomly from the RAM

storage. RAM is considered "random access" because you can access any memory

cell directly if you know the row and column that intersect at that cell.

2. ROM (Read Only Memory): ROM is a permanent form of storage. ROM stays

active regardless of whether power supply to it is turned on or off. ROM devices

do not allow data stored on them to be modified.

Secondary Memory:-

Stores data and programs permanently :its retained after the power is turned off

1. Hard drive (HD): A hard disk is part of a unit, often called a "disk drive," "hard drive," or
"hard

disk drive," that store and provides relatively quick access to large amounts of data on an

electromagnetically charged surface or set of surfaces.

2. Optical Disk: an optical disc drive (ODD) is a disk drive that uses laser light as part of the
process
of reading or writing data to or from optical discs. Some drives can only read from discs, but
recent

drives are commonly both readers and recorders, also called burners or writers. Compact
discs,

DVDs, and Blu-ray discs are common types of optical media which can be read and recorded
by

such drives. Optical drive is the generic name; drives are usually described as "CD" "DVD", or

"Bluray", followed by "drive", "writer", etc. There are three main types of optical media: CD,

DVD, and Blu-ray disc. CDs can store up to 700 megabytes (MB) of data and DVDs can store
up

to 8.4 GB of data. Blu-ray discs, which are the newest type of optical media, can store up to
50

GB of data. This storage capacity is a clear advantage over the floppy disk storage media (a

magnetic media), which only has a capacity of 1.44 MB.

3. Flash Disk

A storage module made of flash memory chips. A Flash disks have no mechanical platters or
access

arms, but the term "disk" is used because the data are accessed as if they were on a hard
drive. The

disk storage structure is emulated.

Output devices

An output device is any piece of computer hardware equipment used to communicate

the results of data processing carried out by an information processing system (such

as a computer) which converts the electronically generated information into human-

readable form.

Example on Output Devices:

1. Monitor
2. LCD Projection Panels
3. Printers (all types)
4. Computer Output Microfilm (COM)
5. Plotters
6. Speaker(s)

Note Basic types of monitors are :

a. Cathode Ray Tube (CRT).

b. Liquid Crystal Displays (LCD).

c. light-emitting diode (LED).

Printer types:
1-Laser Printer.

2-Ink Jet Printer.

3-Dot Matrix Printer

Software :
Software is a generic term for organized collections of computer data and instructions,

often broken into two major categories: system software that provides the basic non-

task-specific functions of the computer, and application software which is used by

users to accomplish specific tasks.

Software Types

A. System software is responsible for controlling, integrating, and managing the

individual hardware components of a computer system so that other software and

the users of the system see it as a functional unit without having to be concerned

with the low-level details such as transferring data from memory to disk, or

rendering text onto a display. Generally, system software consists of an operating

system and some fundamental utilities such as disk formatters, file managers,

display managers, text editors, user authentication (login) and management tools,

and networking and device control software.

B. Application software is used to accomplish specific tasks other than just running

the computer system. Application software may consist of a single program, such

as an image viewer; a small collection of programs (often called a software

package) that work closely together to accomplish a task, such as a spreadsheet or

text processing system; a larger collection (often called a software suite) of related
but independent programs and packages that have a common user interface or

shared data format, such as Microsoft Office, which consists of closely integrated

word processor, spreadsheet, database, etc.; or a software system, such as a

database management system, which is a collection of fundamental programs that

may provide some service to a variety of other independent applications.

Comparison Application Software and System Software

System Software Application Software

Computer software, or just software is a

general term primarily used for digitally stored

data such as computer programs and other

kinds of information read and written by

computers. App comes under computer

software though it has a wide scope now.

Application software, also known as an

application or an "app", is computer software

designed to help the user to perform specific

tasks.

Example:

1) Microsoft Windows

2) Linux

3) Unix

4) Mac OSX

5) DOS

1) Opera (Web Browser)

2) Microsoft Word (Word Processing)

3) Microsoft Excel (Spreadsheet software)

4) MySQL (Database Software)

5) Microsoft PowerPoint (Presentation Software)

6) Adobe Photoshop (Graphics Software)

Interaction: Generally, users do not interact with system

software as it works in the background.

Users always interact with application software

while doing different activities.

Dependency: System software can run independently of the

application software.

Application software cannot run without the

presence of the system software.

Unit of Measurements

Storage measurements: The basic unit used in computer data storage is called a bit

(binary digit). Computers use these little bits, which are composed of ones

and zeros, to do things and talk to other computers. All your files, for

instance, are kept in the computer as binary files and translated into words

and pictures by the software (which is also ones and zeros). This two

number system, is called a “binary number system” since it has only two

numbers in it. The decimal number system in contrast has ten unique digits,

zero through nine.

Computer Storage units

Bit BIT 0 or 1

Kilobyte KB 1024 bytes

Megabyte MB 1024 kilobytes

Gigabyte GB 1024 megabytes

Terabyte TB 1024 gigabytes

Size example

• 1 bit - answer to an yes/no question

• 1 byte - a number from 0 to 255.

• 90 bytes: enough to store a typical line of text from a book.

• 4 KB: about one page of text.

• 120 KB: the text of a typical pocket book.

• 3 MB - a three minute song (128k bitrate)

• 650-900 MB - an CD-ROM

• 1 GB -114 minutes of uncompressed CD-quality audio at 1.4 Mbit/s

• 8-16 GB - size of a normal flash drive

Speed measurement: The speed of Central Processing Unit (CPU) is measured by

Hertz (Hz), Which represent a CPU cycle. The speed of CPU is known as Computer

Speed.

CPU SPEED MEASURES

1 hertz or Hz 1 cycle per second

1 MHz 1 million cycles per second or 1000 Hz

1 GHz 1 billion cycles per second or 1000 MHz

Computers classification***

Computers can be generally classified by size and power as follows, though there is

Considerable overlap:

• Personal computer: A small, single-user computer based on a microprocessor. In

addition to the microprocessor, a personal computer has a keyboard for entering

data, a monitor for displaying information, and a storage device for saving data.

• workstation : A powerful, single-user computer. A workstation is like a personal

computer, but it has a more powerful microprocessor and a higher-quality

monitor.

• minicomputer : A multi-user computer capable of supporting from 10 to hundreds of

users simultaneously.

• mainframe : A powerful multi-user computer capable of supporting many hundreds

or thousands of users simultaneously.

• supercomputer : An extremely fast computer that can perform hundreds of millions

of instructions per second.

Laptop and Smartphone Computers

LAPTOP: A laptop is a battery or AC-powered personal computer that can be easily

carried and used in a variety of locations. Many laptops are designed to

have all of the functionality of a desktop computer, whichmeans they can

generally run the same software and open the same types of files. However,

some laptops, such as netbooks, sacrifice some functionality in order to be

even more portable.

Netbook: A netbook is a type of laptop that is designed to be even more portable.

Netbooks are often cheaper than laptops or desktops. They are generally less

powerful than other types of computers, but they provide enough power for

email and internet access, which is where the name "netbook" comes from.

Mobile Device: A mobile device is basically any handheld computer. It is designed to

be extremely portable, often fitting in the palm of your hand or in your pocket.

Some mobile devices are more powerful, and they allow you to do many of

***http://www.acobas.net/teaching/survival/handouts/pcwebopedia.pdf

the same things you can do with a desktop or laptop computer. These include

tablet computers, e-readers, and smartphones.

Tablet Computers: Like laptops, tablet computers are designed to be portable.

However, they provide a very different computing experience. The most

obvious difference is that tablet computers don't have keyboards or touchpads.

Instead, the entire screen is touch-sensitive, allowing you to type on a virtual

keyboard and use your finger as a mouse pointer. Tablet computers are mostly

designed for consuming media, and they are optimized for tasks like web

browsing, watching videos, reading e-books, and playing games. For many

people, a "regular" computer like a desktop or laptop is still needed in order

to use some programs. However, the convenience of a tablet computer means

that it may be ideal as a second computer.

Smartphones: A smartphone is a powerful mobile phone that is designed to run a

variety of applications in addition to phone service. They are basically small

tablet computers, and they can be used for web browsing, watching videos,

reading e-books, playing games and more.

Data, Information and Knowledge

Data: Facts and figures which relay something specific, but which are not organized

in any way and which provide no further information regarding patterns, context, etc.

So data means "unstructured facts and figures that have the least impact on the typical

manager."

Information: For data to become information, it must be contextualized, categorized,

calculated and condensed. Information thus paints a bigger picture; it is data with

relevance and purpose. It may convey a trend in the environment, or perhaps indicate

a pattern of sales for a given period of time. Essentially information is found "in

answers to questions that begin with such words as who, what, where, when, and how

many".

Knowledge: Knowledge is closely linked to doing and implies know-how and

understanding. The knowledge possessed by each individual is a product of his

experience, and encompasses the norms by which he evaluates new inputs from his

surroundings.

The content of the human mind can be classified into four categories:

1. Data: symbols

2. Information: data that are processed to be useful; provides answers to "who", "what",

"where", and "when" questions

3. Knowledge: application of data and information; answers "how" questions

4. Wisdom: evaluated understanding.

We need to understand that processing data produced Information and process

Information produces Knowledge and so on

Characteristics of Computer

Speed, accuracy, diligence, storage capability and versatility are some of the key

characteristics of a computer. A brief overview of these characteristics are

• Speed: The computer can process data very fast, at the rate of millions of instructions

per second. Some calculations that would have taken hours and days to

complete otherwise, can be completed in a few seconds using the computer.

For example, calculation and generation of salary slips of thousands of

employees of an organization, weather forecasting that requires analysis of a

large amount of data related to temperature, pressure and humidity of various

places, etc.

• Accuracy: Computer provides a high degree of accuracy. For example, the computer

can accurately give the result of division of any two numbers up to 10 decimal

places.

• Diligence: When used for a longer period of time, the computer does not get tired or

fatigued. It can perform long and complex calculations with the same speed and

accuracy from the start till the end.

• Storage Capability: Large volumes of data and information can be stored in the

computer and also retrieved whenever required. A limited amount of data can

be stored, temporarily, in the primary memory. Secondary storage devices like

floppy disk and compact disk can store a large amount of data permanently.

• Versatility: Computer is versatile in nature. It can perform different types of tasks

with the same ease. At one moment you can use the computer to prepare a letter

document and in the next moment you may play music or print a document.

Computers have several limitations too. Computer can only perform tasks that

it has been programmed to do.

10
Computer cannot do any work without instructions from the user. It executes

instructions as specified by the user and does not take its own decisions.

Computer Viruses*

Viruses: A virus is a small piece of software that piggybacks on real programs. For

example, a virus might attach itself to a program such as a spreadsheet program.

Each time the spreadsheet program runs, the virus runs, too, and it has the

chance to reproduce (by attaching to other programs) or wreak havoc.

•E-mail viruses: An e-mail virus travels as an attachment to e-mail messages, and

usually replicates itself by automatically mailing itself to dozens of people

in the victim's e-mail address book. Some e-mail viruses don't even require

a double-click -- they launch when you view the infected message in the

preview pane of your e-mail software [source: Johnson].

•Trojan horses: A Trojan horse is simply a computer program. The program claims to

do one thing (it may claim to be a game) but instead does damage when you

run it (it may erase your hard disk). Trojan horses have no way to replicate

automatically.

•Worms: A worm is a small piece of software that uses computer networks and security

holes to replicate itself. A copy of the worm scans the network for another

machine that has a specific security hole. It copies itself to the new machine

using the security hole, and then starts replicating from there, as well.

What are some tips to avoid viruses and lessen their impact?*

-virus software from a reputable vendor. Update it and use it

regularly.

viruses on a regular basis, install an "on access"

scanner (included in most anti-virus software packages) and configure it to start

each time you start up your computer. This will protect your system by

checking for viruses each time you run an executable file.

executable code. This includes packaged software that you buy from the store

as well as any program you might download from the Internet.

e community or chat room, be very careful

about accepting files or clicking links that you find or that people send you

within the community.

messages, etc.) on disc so that in the event of a virus infection, you do not lose

valuable work.