OPERATING SYSTEMS

LABORATORY MANUAL

B.TECH (R18)
(PCC-CS592)
(II YEAR – I SEM)
2023-2027
(2019‐2020)

DEPARTMENT OF COMPUTER SCIENCE AND

ENGINEERING

MALLA REDDY COLLEGE OF ENGINEERING &

Ideal Institute of Engineering
TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
Recognized under 2(f) and 12 (B) of UGC ACT 1956

Affiliated to JNTUH, Hyderabad, Approved by AICTE ‐ Accredited by NBA & NAAC – ‘A’ Grade ‐ ISO 9001:2015
Certified) Maisammaguda, Dhulapally (Post Via. Hakimpet), Secunderabad – 500100, Telangana State, India
 DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING

VISION

 To improve the quality of technical education that provides efficient software

engineers with an attitude to adapt challenging IT needs of local, national and

international arena, through teaching and interaction with alumni and industry.

MISSION

 Department intends to meet the contemporary challenges in the field of IT and is

playing a vital role in shaping the education of the 21st century by providing unique

educational and research opportunities.

 PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

PEO1 – ANALYTICAL SKILLS

To facilitate the graduates with the ability to visualize, gather information,

articulate, analyze, solve complex problems, and make decisions. These are
essential to address the challenges of complex and computation intensive problems
increasing their productivity.

PEO2 – TECHNICAL SKILLS

To facilitate the graduates with the technical skills that prepare them for
immediate employment and pursue certification providing a deeper understanding
of the technology in advanced areas of computer science and related fields, thus
encouraging to pursue higher education and research based on their interest.

PEO3 – SOFT SKILLS

To facilitate the graduates with the soft skills that include fulfilling the
mission, setting goals, showing self-confidence by communicating effectively,
having a positive attitude, get involved in team- work, being a leader, managing
their career and their life.

PEO4 – PROFESSIONAL ETHICS

To facilitate the graduates with the knowledge of professional and ethical

responsibilities by paying attention to grooming, being conservative with style,
following dress codes, safety codes, and adapting themselves to technological
advancements.
 PROGRAM SPECIFIC OUTCOMES (PSOs)

After the completion of the course, B. Tech Information Technology, the graduates will
have the following Program Specific Outcomes:

1. Fundamentals and critical knowledge of the Computer System:- Able to

Understand the working principles of the computer System and its components ,
Apply the knowledge to build, asses, and analyze the software and hardware
aspects of it .

2. The comprehensive and Applicative knowledge of Software Development:

Comprehensive skills of Programming Languages, Software process models,
methodologies, and able to plan, develop, test, analyze, and manage the software
and hardware intensive systems in heterogeneous platforms individually or
working in teams.

3. Applications of Computing Domain & Research: Able to use the professional,

managerial, interdisciplinary skill set, and domain specific tools in development
processes, identify the research gaps, and provide innovative solutions to them.
 PROGRAMOUTCOMES (POs)

Engineering Graduates should possess the following:

1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering
fundamentals, and an engineering specialization to the solution of complex
engineering problems.
2. Problem analysis: Identify, formulate, review research literature, and analyze complex
engineering problems reaching substantiated conclusions using first principles of
mathematics, natural sciences, and engineering sciences.
3. Design / development of solutions: Design solutions for complex engineering
problems and design system components or processes that meet the specified needs
with appropriate consideration for the public health and safety, and the cultural,
societal, and environmental considerations.
4. Conduct investigations of complex problems: Use research-based knowledge and
research methods including design of experiments, analysis and interpretation of data,
and synthesis of the information to provide valid conclusions.
5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to complex
engineering activities with an understanding of the limitations.
6. The engineer and society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent
responsibilities relevant to the professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional
engineering solutions in societal and environmental contexts, and demonstrate the
knowledge of, and need for sustainable development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities
and norms of the engineering practice.
9. Individual and team work: Function effectively as an individual, and as a member or
leader in diverse teams, and in multidisciplinary settings.
10. Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to comprehend
and write effective reports and design documentation, make effective presentations,
and give and receive clear instructions.
11. Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a
member and leader in a team, to manage projects and in multi-disciplinary
environments.
12. Life- long learning: Recognize the need for, and have the preparation and ability to
engage in independent and life-long learning in the broadest context of technological
change.
II Year B. Tech CSE ‐ I Sem L T/P/D C
- -/3/- 1.5
(R18A0583) OPERATING SYSTEMS LAB
OBJECTIVES:
 To understand the functionalities of various layers of OSI model
 To explain the difference between hardware, software; operating systems, programs
and files.
 Identify the purpose of different software applications.

Week 1: Simulate the following CPU scheduling algorithms.

a) FCFS b) SJF c) Round Robin d) Priority.

Week 2: Write a C program to simulate producer-consumer problem using

Semaphores

Week 3: Write a C program to simulate the concept of Dining-philosophers problem.

Week 4: Simulate MVT and MFT.

Week 5: Write a C program to simulate the following contiguous memory allocation

Techniques
a) Worst fit b) Best fit c) First fit.

Week 6: Simulate all page replacement algorithms

a)FIFO b) LRU c) OPTIMAL

Week 7: Simulate all File Organization Techniques

a) Single level directory b) Two level directory

Week 8: Simulate all file allocation strategies

a) Sequential b) Indexed c) Linked.

Week 9: Simulate Bankers Algorithm for Dead Lock Avoidance.

Week 10: Simulate Bankers Algorithm for Dead Lock Prevention.

Week 11: Write a C program to simulate disk scheduling algorithms.

a) FCFS b) SCAN c) C-SCAN

REFERENCE BOOKS:
1. An Introduction to Operating Systems, P.C.P Bhatt, 2nd edition, PHI.
2. Modern Operating Systems, Andrew S Tanenbaum, 3rd Edition, PHI
OUTCOMES:
At the end of the course the students are able to:
 Ability to implement inter process communication between two processes.
 Ability to design and solve synchronization problems.
 Ability to simulate and implement operating system concepts such as scheduling,
Deadlock management, file management, and memory management.
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
( UGC-Autonomous Institution , Govt. of India )
(Permanently Affiliated to JNTUH, Approved by AICTE-Accredited by NBA & NAAC- A-Grade; ISO 9001:2008 Certified)
Maisammaguda, Dhulapally Post, Via Hakimpet, Secunderabad – 500100

DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING

Operating Systems Lab Manual (R18A0583)

TABLE OF CONTENTS

EXP.NO NAMEOF THE EXPERIMENT PAGE.NO

CPU SCHEDULING ALGORITHMS
A) FIRST COME FIRST SERVE(FCFS) 1-3
1 B) SHORTEST JOB FIRST(SJF) 4-6
C) ROUND ROBIN 7-9
D) PRIORITY 10-12
PRODUCER-CONSUMER PROBLEM USING
2 13-14
SEMAPHORES
3 DINING-PHILOSOPHERS PROBLEM 15-18
MEMORYMANAGEMENT TECHNIQUES
A) MULTI PROGRAMMING WITH FIXED
19-21
4 NUMBER OF TASKS(MFT)
B) MULTI PROGRAMMING WITH
22-24
VARIABLE NUMBER OF TASKS(MVT)
CONTIGUOUS MEMORY ALLOCATION
A) WORST FIT 25-26
5
B) BEST FIT 27-28
C) FIRST FIT 28-29
PAGE REPLACEMENT ALGORITHMS
A) FIRST IN FIRST OUT(FIFO) 30-32
6
B) LEAST RECENTLY USED(LRU) 33-35
C) OPTIMAL 36-39
FILE ORGANIZATION TECHNIQUES
7 A) SINGLE LEVEL DIRECTORY 40-42
B) TWO LEVEL DIRECTORY 43-46
FILE ALLOCATION STRATEGIES
A) SEQUENTIAL 47-49
8
B) INDEXED 50-52
C) LINKED 53-55
9 DEAD LOCK AVOIDANCE 56-59
10 DEAD LOCK PREVENTION 60-62
DISK SCHEDULING ALGORITHMS
A) FCFS 63-64
11
B) SCAN 65-66
C) C-SCAN 67-69
 MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY

Maisammaguda, Dhulapally Post, Via Hakimpet, Secunderabad – 500100

DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING

GENERAL LABORATORY INSTRUCTIONS

1. Students are advised to come to the laboratory at least 5 minutes before (to starting time), those
who come after 5 minutes will not be allowed into the lab.
2. Plan your task properly much before to the commencement, come prepared to the lab with
the synopsis / program / experiment details.
3. Student should enter into the laboratory with:
a. Laboratory observation notes with all the details (Problem statement, Aim, Algorithm,
Procedure, Program, Expected Output, etc.,) filled in for the lab session.
b. Laboratory Record updated up to the last session experiments and other utensils (if any)
needed in the lab.
c. Proper Dress code and Identity card.
4. Sign in the laboratory login register, write the TIME-IN, and occupy the computer system
allotted to you by the faculty.
5. Execute your task in the laboratory, and record the results / output in the lab observation
note book, and get certified by the concerned faculty.
6. All the students should be polite and cooperative with the laboratory staff, must maintain the
discipline and decency in the laboratory.
7. Computer labs are established with sophisticated and high end branded systems, which should
be utilized properly.
8. Students / Faculty must keep their mobile phones in SWITCHED OFF mode during the lab
sessions. Misuse of the equipment, misbehaviors with the staff and systems etc., will attract
severe punishment.
9. Students must take the permission of the faculty in case of any urgency to go out ; if
anybody found loitering outside the lab / class without permission during working hours will
be treated seriously and punished appropriately.
10. Students should LOG OFF/ SHUT DOWN the computer system before he/she leaves the lab
after completing the task (experiment) in all aspects. He/she must ensure the system / seat
is kept properly.

Head of the Department Principal

EXPERIMENT NO.1

CPU SCHEDULINGALGORITHMS

A). FIRST COME FIRST SERVE:

AIM: To write a c program to simulate the CPU scheduling algorithm First Come First
Serve (FCFS)

DESCRIPTION:

To calculate the average waiting time using the FCFS algorithm first the waiting
time of the first process is kept zero and the waiting time of the second process is the
burst time of the first process and the waiting time of the third process is the sum of the
burst times of the first and the second process and so on. After calculating all the waiting
times the average waiting time is calculated as the average of all the waiting times. FCFS
mainly says first come first serve the algorithm which came first will be served first.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process name and the burst time Step
4: Set the waiting of the first process as ‗0‘and its burst time as its turnaround time Step
5: for each process in the Ready Q calculate
a). Waiting time (n) = waiting time (n-1) + Burst time (n-1) b).
Turnaround time (n)= waiting time(n)+Burst time(n)
Step 6: Calculate
a) Average waiting time = Total waiting Time / Number of process

b) Average Turnaround time = Total Turnaround Time / Number of process

Step 7: Stop the process

Page 1
SOURCE CODE:

#include<stdio.h>
#include<conio.h>
main()
{
int bt[20], wt[20], tat[20], i, n;
float wtavg, tatavg;
clrscr();
printf("\nEnter the number of processes -- ");
scanf("%d", &n);
for(i=0;i<n;i++)
{
printf("\nEnter Burst Time for Process %d -- ", i);
scanf("%d", &bt[i]);
}
wt[0] = wtavg = 0;
tat[0] = tatavg = bt[0];
for(i=1;i<n;i++)
{
wt[i] = wt[i-1] +bt[i-1];
tat[i] = tat[i-1] +bt[i];
wtavg = wtavg + wt[i];
tatavg = tatavg + tat[i];
}
printf("\t PROCESS \tBURST TIME \t WAITING TIME\t TURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\n\t P%d \t\t %d \t\t %d \t\t %d", i, bt[i], wt[i], tat[i]);
printf("\nAverage Waiting Time -- %f", wtavg/n);
printf("\nAverage Turnaround Time -- %f", tatavg/n);
getch();
}

Page 2
INPUT
Enter the number of processes -- 3
Enter Burst Time for Process 0 -- 24
Enter Burst Time for Process 1 -- 3
Enter Burst Time for Process 2 -- 3

OUTPUT
PROCESS BURST TIME WAITING TIME TURNAROUND
TIME
P0 24 0 24
P1 3 24 27
P2 3 27 30
Average Waiting Time-- 17.000000
Average Turnaround Time -- 27.000000

Page 3
 B). SHORTEST JOB FIRST:

AIM: To write a program to stimulate the CPU scheduling algorithm Shortest job first
(Non- Preemption)

DESCRIPTION:

To calculate the average waiting time in the shortest job first algorithm the sorting of
the process based on their burst time in ascending order then calculate the waiting time of
each process as the sum of the bursting times of all the process previous or before to that
process.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process id and accept the CPU
burst time
Step 4: Start the Ready Q according the shortest Burst time by sorting according to
lowest to highest burst time.
Step 5: Set the waiting time of the first process as ‗0‘ and its turnaround time as its burst
time.
Step 6: Sort the processes names based on their Burt time
Step 7: For each process in the ready queue,
calculate
a) Waiting time(n)= waiting time (n-1) + Burst time (n-1)
b) Turnaround time (n)= waiting time(n)+Burst time(n)
Step 8: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process
Step 9: Stop the process

Page 4
SOURCE CODE :

#include<stdio.h>
#include<conio.h>
main()
{
int p[20], bt[20], wt[20], tat[20], i, k, n, temp; float wtavg,
tatavg;
clrscr();
printf("\nEnter the number of processes -- ");
scanf("%d", &n);
for(i=0;i<n;i++)
{
p[i]=i;
printf("Enter Burst Time for Process %d -- ", i);
scanf("%d", &bt[i]);

}
for(i=0;i<n;i++)
for(k=i+1;k<n;k++)
if(bt[i]>bt[k])
{
temp=bt[i];
bt[i]=bt[k];
bt[k]=temp;

temp=p[i];
p[i]=p[k];
p[k]=temp;
}
wt[0] = wtavg = 0;
tat[0] = tatavg = bt[0]; for(i=1;i<n;i++)
{
wt[i] = wt[i-1] +bt[i-1];
tat[i] = tat[i-1] +bt[i];
wtavg = wtavg + wt[i];
tatavg = tatavg + tat[i];
}
printf("\n\t PROCESS \tBURST TIME \t WAITING TIME\t TURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\n\t P%d \t\t %d \t\t %d \t\t %d", p[i], bt[i], wt[i], tat[i]);
printf("\nAverage Waiting Time -- %f", wtavg/n);
printf("\nAverage Turnaround Time -- %f", tatavg/n); getch();}

Page 5
INPUT
Enter the number of processes -- 4
Enter Burst Time for Process 0 -- 6
Enter Burst Time for Process 1 -- 8
Enter Burst Time for Process 2 -- 7
Enter Burst Time for Process 3 -- 3
OUTPUT
PROCESS BURST WAITING TURNARO
TIME TIME UND TIME
P3 3 0 3
P0 6 3 9
P2 7 9 16
P1 8 16 24
Average Waiting Time -- 7.000000
Average Turnaround Time -- 13.000000

Page 6
 C). ROUND ROBIN:

AIM: To simulate the CPU scheduling algorithm round-robin.

DESCRIPTION:

To aim is to calculate the average waiting time. There will be a time slice, each
process should be executed within that time-slice and if not it will go to the waiting
state so first check whether the burst time is less than the time-slice. If it is less than it
assign the waiting time to the sum of the total times. If it is greater than the burst-time
then subtract the time slot from the actual burst time and increment it by time-slot and
the loop continues until all the processes are completed.

ALGORITHM:
Step 1: Start the process
Step 2: Accept the number of processes in the ready Queue and time quantum (or) time
slice
Step 3: For each process in the ready Q, assign the process id and accept the CPU burst
time
Step 4: Calculate the no. of time slices for each process where No. of time
slice for process (n) = burst time process (n)/time slice
Step 5: If the burst time is less than the time slice then the no. of time slices =1.
Step 6: Consider the ready queue is a circular Q, calculate
a) Waiting time for process (n) = waiting time of process(n-1)+ burst time of
process(n-1 ) + the time difference in getting the CPU from process(n-1)
b) Turnaround time for process(n) = waiting time of process(n) + burst time of
process(n)+ the time difference in getting CPU from process(n).
Step 7: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process Step
8: Stop the process

Page 7
SOURCE CODE
#include<stdio.h>
main()
{
int i,j,n,bu[10],wa[10],tat[10],t,ct[10],max;
float awt=0,att=0,temp=0;
clrscr();
printf("Enter the no of processes -- ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("\nEnter Burst Time for process %d -- ", i+1);
scanf("%d",&bu[i]);
ct[i]=bu[i];
}
printf("\nEnter the size of time slice -- ");
scanf("%d",&t);
max=bu[0];
for(i=1;i<n;i++)
if(max<bu[i])
max=bu[i];
for(j=0;j<(max/t)+1;j++)
for(i=0;i<n;i++)
if(bu[i]!=0)
if(bu[i]<=t) {
tat[i]=temp+bu[i];
temp=temp+bu[i];
bu[i]=0;
}
else {
bu[i]=bu[i]-t;
temp=temp+t;
}
for(i=0;i<n;i++){
wa[i]=tat[i]-
ct[i]; att+=tat[i];
awt+=wa[i];}
printf("\nThe Average Turnaround time is -- %f",att/n);
printf("\nThe Average Waiting time is -- %f ",awt/n);
printf("\n\tPROCESS\t BURST TIME \t WAITING TIME\tTURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\t%d \t %d \t\t %d \t\t %d \n",i+1,ct[i],wa[i],tat[i]);
getch();}

Page 8
INPUT:

Enter the no of processes – 3

Enter Burst Time for process 1 – 24
Enter Burst Time for process 2 -- 3
Enter Burst Time for process 3 – 3
Enter the size of time slice – 3

OUTPUT:
PROCESS BURST TIME WAITING TIME TURNAROUNDTIME
1 24 6 30
2 3 4 7
3 3 7 10
The Average Turnaround time is – 15.666667 The
Average Waiting time is ------------ 5.666667

Page 9
 D). PRIORITY:

AIM: To write a c program to simulate the CPU scheduling priorityalgorithm.

DESCRIPTION:

To calculate the average waiting time in the priority algorithm, sort the burst
times according to their priorities and then calculate the average waiting time of the
processes. The waiting time of each process is obtained by summing up the burst times
of all the previous processes.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process id and accept the CPU burst
time
Step 4: Sort the ready queue according to the priority number.
Step 5: Set the waiting of the first process as ‗0‘ and its burst time as its turnaround time
Step 6: Arrange the processes based on process priority
Step 7: For each process in the Ready Q calculate Step 8:
for each process in the Ready Q calculate
a) Waiting time(n)= waiting time (n-1) + Burst time (n-1)
b) Turnaround time (n)= waiting time(n)+Burst time(n)
Step 9: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process Print the results
in an order.
Step10: Stop

Page 10
SOURCE CODE:
#include<stdio.h>
main()
{
int p[20],bt[20],pri[20], wt[20],tat[20],i, k, n, temp; float wtavg,
tatavg;
clrscr();
printf("Enter the number of processes --- ");
scanf("%d",&n);
for(i=0;i<n;i++){
p[i] = i;
printf("Enter the Burst Time & Priority of Process %d --- ",i); scanf("%d
%d",&bt[i], &pri[i]);
}
for(i=0;i<n;i++)
for(k=i+1;k<n;k++)
if(pri[i] > pri[k]){
temp=p[i];
p[i]=p[k];
p[k]=temp;
temp=bt[i];
bt[i]=bt[k];
bt[k]=temp;
temp=pri[i];
pri[i]=pri[k];
pri[k]=temp;
}
wtavg = wt[0] = 0;
tatavg = tat[0] = bt[0];
for(i=1;i<n;i++)
{
wt[i] = wt[i-1] + bt[i-1];
tat[i] = tat[i-1] + bt[i];

wtavg = wtavg + wt[i];

tatavg = tatavg + tat[i];
}
printf("\nPROCESS\t\tPRIORITY\tBURST TIME\tWAITING TIME\tTURNAROUND
TIME");
for(i=0;i<n;i++)
printf("\n%d \t\t %d \t\t %d \t\t %d \t\t %d ",p[i],pri[i],bt[i],wt[i],tat[i]);
printf("\nAverage Waiting Time is --- %f",wtavg/n); printf("\nAverage
Turnaround Time is --- %f",tatavg/n);
getch();}

Page 11
 INPUT
Enter the number of processes -- 5
Enter the Burst Time & Priority of Process 0 --- 10 3
Enter the Burst Time & Priority of Process 1 --- 1 1
Enter the Burst Time & Priority of Process 2 --- 2 4
Enter the Burst Time & Priority of Process 3 --- 1 5
Enter the Burst Time & Priority of Process 4 --- 5 2
OUTPUT
PROCESS PRIORITY BURST TIME WAITIN TURNARO
G TIME UND TIME
1 1 1 0 1
4 2 5 1 6
0 3 10 6 16
2 4 2 16 18
3 5 1 18 19
Average Waiting Time is --- 8.200000
Average Turnaround Time is --- 12.000000

VIVA QUESTIONS
1) Define the following
a) Turnaround time b) Waiting time c) Burst time d) Arrival time
2) What is meant by process scheduling?
3) What are the various states of process?
4) What is the difference between preemptive and non-preemptive scheduling
5) What is meant by time slice?
6) What is round robin scheduling?

Page 12
EXPERIMENT.NO 2

AIM: To Write a C program to simulate producer-consumer problem using semaphores.

DESCRIPTION
Producer consumer problem is a synchronization problem. There is a fixed size buffer where the
producer produces items and that is consumed by a consumer process. One solution to the producer-
consumer problem uses shared memory. To allow producer and consumer processes to run
concurrently, there must be available a buffer of items that can be filled by the producer and emptied
by the consumer. This buffer will reside in a region of memory that is shared by the producer and
consumer processes. The producer and consumer must be synchronized, so that the consumer does
not try to consume an item that has not yet been produced.

PROGRAM
#include<stdio.>
void main()
{
int buffer[10], bufsize, in, out, produce, consume,
choice=0; in = 0;
out = 0;
bufsize = 10;
while(choice !=3)
{
printf(“\n1. Produce \t 2. Consume \t3. Exit”);
printf(“\nEnter your choice: ”);
scanf(“%d”,&choice);
switch(choice) {
case 1: if((in+1)%bufsize==out)
printf(“\nBuffer is Full”);
else
{
printf(“\nEnter the value: “);
scanf(“%d”, &produce);
buffer[in] = produce;
in = (in+1)%bufsize;
}
break;;;
case 2: if(in == out)
printf(“\nBuffer is Empty”);
else
{
consume = buffer[out];
printf(“\nThe consumed value is %d”, consume);
out = (out+1)%bufsize;
}
break;
} } }

Page 13
OUTPUT
1. Produce 2. Consume 3. Exit
Enter your choice: 2
Buffer is Empty
1. Produce 2. Consume 3. Exit
Enter your choice: 1
Enter the value: 100
1. Produce 2. Consume 3. Exit
Enter your choice: 2
The consumed value is 100
1. Produce 2. Consume 3. Exit
Enter your choice: 3

Page 14
 EXPERIMENT.NO 3
AIM: To Write a C program to simulate the concept of Dining-Philosophers problem.

DESCRIPTION
The dining-philosophers problem is considered a classic synchronization problem because it is an example
of a large class of concurrency-control problems. It is a simple representation of the need to allocate several
resources among several processes in a deadlock-free and starvation-free manner. Consider five philosophers
who spend their lives thinking and eating. The philosophers share a circular table surrounded by five chairs,
each belonging to one philosopher. In the center of the table is a bowl of rice, and the table is laid with five
single chopsticks. When a philosopher thinks, she does not interact with her colleagues. From time to time, a
philosopher gets hungry and tries to pick up the two chopsticks that are closest to her (the chopsticks that are
between her and her left and right neighbors). A philosopher may pick up only one chopstick at a time.
Obviously, she cam1ot pick up a chopstick that is already in the hand of a neighbor. When a hungry
philosopher has both her chopsticks at the same time, she eats without releasing her chopsticks. When she is
finished eating, she puts down both of her chopsticks and starts thinking again. The dining-philosophers
problem may lead to a deadlock situation and hence some rules have to be framed to avoid the occurrence of
deadlock.

PROGRAM
int tph, philname[20], status[20], howhung, hu[20], cho; main()
{
int i; clrscr();
printf("\n\nDINING PHILOSOPHER PROBLEM");
printf("\nEnter the total no. of philosophers: ");
scanf("%d",&tph);
for(i=0;i<tph;i++)
{
philname[i]=(i+1); status[i]=1;
}
printf("How many are hungry : ");
scanf("%d", &howhung);
if(howhung==tph)
{
printf(“\n All are hungry..\nDead lock stage will occur”);
printf(\n”Exiting\n”);
else{
for(i=0;i<howhung;i++){
printf(“Enterphilosopher%dposition:”,(i+1));
scanf(“%d”,&hu[i]);
status[hu[i]]=2;
}

Page 15
 do
{
printf("1.One can eat at a time\t2.Two can eat at a time
\t3.Exit\nEnter your choice:");
scanf("%d", &cho);
switch(cho)
{
case 1: one();
break;
case 2: two();
break;
case 3: exit(0);
default: printf("\nInvalid option..");
}
}while(1);
}
}
one()
{
int pos=0, x, i;
printf("\nAllow one philosopher to eat at any time\n");
for(i=0;i<howhung; i++, pos++)
{
printf("\nP %d is granted to eat", philname[hu[pos]]);
for(x=pos;x<howhung;x++)
printf("\nP %d is waiting", philname[hu[x]]);

}
}
two()
{
int i, j, s=0, t, r, x;
printf("\n Allow two philosophers to eat at same
time\n"); for(i=0;i<howhung;i++)
{
for(j=i+1;j<howhung;j++)
{
if(abs(hu[i]-hu[j])>=1&& abs(hu[i]-hu[j])!=4)
{
printf("\n\ncombination %d \n", (s+1));
t=hu[i];
r=hu[j]; s++;
printf("\nP %d and P %d are granted to eat", philname[hu[i]],
philname[hu[j]]);

Page 16
 for(x=0;x<howhung;x++)
{
if((hu[x]!=t)&&(hu[x]!=r))
printf("\nP %d is waiting", philname[hu[x]]);
}
}
}
}
}

INPUT
DINING PHILOSOPHER PROBLEM
Enter the total no. of philosophers: 5
How many are hungry : 3
Enter philosopher 1 position: 2
Enter philosopher 2 position: 4
Enter philosopher 3 position: 5

OUTPUT
1. One can eat at a time 2.Two can
eat at a time 3.Exit Enter your choice: 1

Allow one philosopher to eat at any time

P 3 is granted to eat
P 3 is waiting
P 5 is waiting
P 0 is waiting
P 5 is granted to eat
P 5 is waiting
P 0 is waiting
P 0 is granted to eat
P 0 is waiting

Page 17
1.One can eat at a time 2.Two can eat at a time 3.Exit
Enter your choice: 2

Allow two philosophers to eat at same time

combination 1
P 3 and P 5 are granted to eat
P 0 is waiting

combination 2
P 3 and P 0 are granted to eat
P 5 is waiting

combination 3
P 5 and P 0 are granted to eat
P 3 is waiting

1.One can eat at a time 2.Two can

eat at a time 3.Exit Enter your choice: 3

Page 18
 EXPERIMENT.NO 4
MEMORY MANAGEMENT

A). MEMORY MANAGEMENT WITH FIXED PARTITIONING TECHNIQUE (MFT)

AIM: To implement and simulate the MFT algorithm.

DESCRIPTION:

In this the memory is divided in two parts and process is fit into it. The process which is best
suited will be placed in the particular memory where it suits. In MFT, the memory is partitioned
into fixed size partitions and each job is assigned to a partition. The memory assigned to a
partition does not change. In MVT, each job gets just the amount of memory it needs. That is, the
partitioning of memory is dynamic and changes as jobs enter and leave the system. MVT is a
more ``efficient'' user of resources. MFT suffers with the problem of internal fragmentation and
MVT suffers with external fragmentation.

ALGORITHM:

Step1: Start the process.

Step2: Declarevariables.
Step3: Enter total memory size ms.
Step4: Allocate memory for os.
Ms=ms-os
Step5: Read the no partition to be divided n Partition size=ms/n.
Step6: Read the process no and process size.
Step 7: If process size is less than partition size allot alse blocke the process. While allocating
update memory wastage-external fragmentation.
if(pn[i]==pn[j])f=1;
if(f==0){ if(ps[i]<=siz)
{
extft=extft+size-
ps[i];avail[i]=1; count++;
}
}
Step 8: Print the results

Page 19
SOURCE CODE :

#include<stdio.h>
#include<conio.h>
main()
{
int ms, bs, nob, ef,n,
mp[10],tif=0; int i,p=0;
clrscr();
printf("Enter the total memory available (in Bytes) -- ");
scanf("%d",&ms);
printf("Enter the block size (in Bytes) -- ");
scanf("%d", &bs);
nob=ms/bs;
ef=ms - nob*bs;
printf("\nEnter the number of processes -- ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("Enter memory required for process %d (in Bytes)-- ",i+1);
scanf("%d",&mp[i]);
}
printf("\nNo. of Blocks available in memory--%d",nob);
printf("\n\nPROCESS\tMEMORYREQUIRED\tALLOCATED\tINTERNAL
FRAGMENTATION");
for(i=0;i<n && p<nob;i++)
{
printf("\n %d\t\t%d",i+1,mp[i]);
if(mp[i] > bs)
printf("\t\tNO\t\t---");
else
{
printf("\t\tYES\t%d",bs-mp[i]);
tif = tif + bs-mp[i];
p++;
}
}
if(i<n)
printf("\nMemory is Full, Remaining Processes cannot be accomodated");
printf("\n\nTotal Internal Fragmentation is %d",tif);
printf("\nTotal External Fragmentation is %d",ef);
getch();
}

Page 20
 INPUT
Enter the total memory available (in Bytes) -- 1000
Enter the block size (in Bytes)-- 300
Enter the number of processes – 5
Enter memory required for process 1 (in Bytes) -- 275
Enter memory required for process 2 (in Bytes) -- 400
Enter memory required for process 3 (in Bytes) -- 290
Enter memory required for process 4 (in Bytes) -- 293
Enter memory required for process 5 (in Bytes) -- 100
No. of Blocks available in memory -- 3

OUTPUT
PROCESS ALLOCAT INTERNAL
MEMORY REQUIRED ED FRAGMENTATION
1 275 YES 25
2 400 NO -----
3 290 YES 10
4 293 YES 7
Memory is Full, Remaining Processes cannot be accommodated Total
Internal Fragmentation is 42
Total External Fragmentation is 100

Page 21
B) MEMORY VARIABLE PARTIONING TYPE (MVT)

AIM: To write a program to simulate the MVT algorithm

ALGORITHM:
Step1: start the process.
Step2: Declare variables.
Step3: Enter total memory size ms.
Step4: Allocate memory for os.
Ms=ms-os
Step5: Read the no partition to be divided n Partition size=ms/n.
Step6: Read the process no and process size.
Step 7: If process size is less than partition size allot alse blocke the process. While allocating
update memory wastage-external fragmentation.
if(pn[i]==pn[j]) f=1;
if(f==0){ if(ps[i]<=size)
{
extft=extft+size-
ps[i];avail[i]=1; count++;
}
}
Step 8: Print the results
Step 9: Stop the process.

Page 22
SOURCE CODE:

#include<stdio.h>
#include<conio.h>
main()
{
int ms,mp[10],i,
temp,n=0; char ch = 'y';
clrscr();
printf("\nEnter the total memory available (in Bytes)-- ");
scanf("%d",&ms);
temp=ms;
for(i=0;ch=='y';i++,n++)
{
printf("\nEnter memory required for process %d (in Bytes) -- ",i+1);
scanf("%d",&mp[i]);
if(mp[i]<=temp)
{
printf("\nMemory is allocated for Process %d ",i+1);
temp = temp - mp[i];
}
else
{
printf("\nMemory is Full"); break;
}
printf("\nDo you want to continue(y/n) -- ");
scanf(" %c", &ch);
}
printf("\n\nTotal Memory Available -- %d", ms);
printf("\n\n\tPROCESS\t\t MEMORY ALLOCATED ");
for(i=0;i<n;i++)
printf("\n \t%d\t\t%d",i+1,mp[i]);
printf("\n\nTotal Memory Allocated is %d",ms-temp);
printf("\nTotal External Fragmentation is %d",temp);
getch();
}

Page 23
 OUTPUT:

Enter the total memory available (in Bytes) – 1000

Enter memory required for process 1 (in Bytes) – 400
Memory is allocated for Process 1
Do you want to continue(y/n) -- y
Enter memory required for process 2 (in Bytes) -- 275
Memory is allocated for Process 2
Do you want to continue(y/n) – y
Enter memory required for process 3 (in Bytes) – 550

Memory is Full

Total Memory Available – 1000

PROCESS MEMORY ALLOCATED

1 400
2 275

Total Memory Allocated is 675

Total External Fragmentation is 325

VIVA QUESTIONS
1) What is MFT?
2) What is MVT?
3) What is the difference between MVT and MFT?
4) What is meant by fragmentation?
5) Give the difference between internal and external fragmentation

Page 24
EXPERIMENT.NO 5
MEMORY ALLOCATION TECHNIQUES

AIM: To Write a C program to simulate the following contiguous memory allocation techniques
a) Worst-fit b) Best-fit c) First-fit

DESCRIPTION
One of the simplest methods for memory allocation is to divide memory into several fixed-sized
partitions. Each partition may contain exactly one process. In this multiple-partition method, when a
partition is free, a process is selected from the input queue and is loaded into the free partition. When the
process terminates, the partition becomes available for another process. The operating system keeps a
table indicating which parts of memory are available and which are occupied. Finally, when a process
arrives and needs memory, a memory section large enough for this process is provided. When it is time to
load or swap a process into main memory, and if there is more than one free block of memory of
sufficient size, then the operating system must decide which free block to allocate. Best-fit strategy
chooses the block that is closest in size to the request. First-fit chooses the first available block that is
large enough. Worst-fit chooses the largest available block.

PROGRAM

WORST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int
frag[max],b[max],f[max],i,j,nb,nf,t
emp; static int bf[max],ff[max];
clrscr();
printf("\n\tMemory Management Scheme - First Fit");
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
{
printf("Block %d:",i);
scanf("%d",&b[i]);
}
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);

Page 25
 }
for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1)
{
temp=b[j]-f[i];
if(temp>=0)
{
ff[i]=j;
break;
}
}
}
frag[i]=temp;
bf[ff[i]]=1;
}
printf("\nFile_no:\tFile_size :\tBlock_no:\tBlock_size:\tFragement");
for(i=1;i<=nf;i++)
printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}
INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 1 5 4
2 4 3 7 3

Page 26
BEST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int frag[max],b[max],f[max],i,j,nb,nf,temp,lowest=10000;
static int bf[max],ff[max];
clrscr();
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
printf("Block %d:",i);
scanf("%d",&b[i]);
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
}
for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1)
{
temp=b[j]-f[i];
if(temp>=0)
if(lowest>temp)
{
ff[i]=j;
lowest=temp;
}
}}
frag[i]=lowest; bf[ff[i]]=1; lowest=10000;
}
printf("\nFile No\tFile Size \tBlock No\tBlock
Size\tFragment"); for(i=1;i<=nf && ff[i]!=0;i++)

printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}

Page 27
INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 2 2 1
2 4 1 5 1

FIRST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int
frag[max],b[max],f[max],i,j,nb,nf,temp,highes
t=0; static int bf[max],ff[max];
clrscr();
printf("\n\tMemory Management Scheme - Worst Fit");
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
{
printf("Block %d:",i);
scanf("%d",&b[i]);
}
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
}

Page 28
 for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1) //if bf[j] is not allocated
{
temp=b[j]-f[i];
if(temp>=0)
if(highest<temp)
{
}
}
frag[i]=highest; bf[ff[i]]=1; highest=0;
}
ff[i]=j; highest=temp;
}
printf("\nFile_no:\tFile_size:\tBlock_no:\tBlock_size:\tFragement");
for(i=1;i<=nf;i++)
printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}

INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 3 7 6
2 4 1 5 1

Page 29
 EXPERIMENT NO.6

PAGE REPLACEMENT ALGORITHMS

AIM: To implement FIFO page replacement technique.

a) FIFO b) LRU c) OPTIMAL

DESCRIPTION:
Page replacement algorithms are an important part of virtual memory management and it helps the OS to
decide which memory page can be moved out making space for the currently needed page. However, the
ultimate objective of all page replacement algorithms is to reduce the number of page faults.
FIFO-This is the simplest page replacement algorithm. In this algorithm, the operating system keeps track
of all pages in the memory in a queue, the oldest page is in the front of the queue. When a page needs to be
replaced page in the front of the queue is selected for removal.

LRU-In this algorithm page will be replaced which is least recently used

OPTIMAL- In this algorithm, pages are replaced which would not be used for the longest duration of time
in the future. This algorithm will give us less page fault when compared to other page replacement
algorithms.

ALGORITHM:
1. Start the process
2. Read number of pages n
3. Read number of pages no
4. Read page numbers into an array a[i]
5. Initialize avail[i]=0 .to check page hit
6. Replace the page with circular queue, while re-placing check page availability in the frame
Place avail[i]=1 if page is placed in the frame Count page faults
7. Print the results.
8. Stop the process.

Page 30
A) FIRST IN FIRST OUT
SOURCE CODE :

#include<stdio.h>
#include<conio.h> int fr[3];
void main()
{
void display();
int i,j,page[12]={2,3,2,1,5,2,4,5,3,2,5,2};
int
flag1=0,flag2=0,pf=0,frsize=3,top=0;
clrscr();
for(i=0;i<3;i++)
{
fr[i]=-1;
}
for(j=0;j<12;j++)
{
flag1=0; flag2=0; for(i=0;i<12;i++)
{
if(fr[i]==page[j])
{
flag1=1; flag2=1; break;
}
}
if(flag1==0)
{
for(i=0;i<frsize;i++)
{
if(fr[i]==-1)
{
fr[i]=page[j]; flag2=1; break;
}
}
}
if(flag2==0)
{
fr[top]=page[j];
top++;
pf++;
if(top>=frsize)
top=0;
}
display();
}

Page 31
printf("Number of page faults : %d ",pf+frsize);
getch();
}
void display()
{
int i; printf("\n");
for(i=0;i<3;i++)
printf("%d\t",fr[i]);
}

OUTPUT:

2 -1 -1
2 3 -1
2 3 -1
2 3 1
5 3 1
5 2 1
5 2 4
5 2 4
3 2 4
3 2 4
3 5 4
3 5 2

Number of page faults: 9

Page 32
 B) LEAST RECENTLY USED

AIM: To implement LRU page replacement technique.

ALGORITHM:

1. Start the process

2. Declare the size
3. Get the number of pages to be inserted
4. Get the value
5. Declare counter and stack
6. Select the least recently used page by counter value
7. Stack them according the selection.
8. Display the values
9. Stop the process

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
int fr[3];
void main()
{
void display();
int p[12]={2,3,2,1,5,2,4,5,3,2,5,2},i,j,fs[3];
int index,k,l,flag1=0,flag2=0,pf=0,frsize=3;
clrscr();
for(i=0;i<3;i++)
{
fr[i]=-1;
}
for(j=0;j<12;j++)
{
flag1=0,flag2=0;
for(i=0;i<3;i++)
{
if(fr[i]==p[j])
{
flag1=1;
flag2=1; break;
}
}
if(flag1==0)

Page 33
{
for(i=0;i<3;i++)
{
if(fr[i]==-1)
{
fr[i]=p[j]; flag2=1;
break;
}
}
}
if(flag2==0)
{
for(i=0;i<3;i++)
fs[i]=0;
for(k=j-1,l=1;l<=frsize-1;l++,k--)
{
for(i=0;i<3;i++)
{
if(fr[i]==p[k]) fs[i]=1;
}}
for(i=0;i<3;i++)
{
if(fs[i]==0)
index=i;
}
fr[index]=p[j];
pf++;
}
display();
}
printf("\n no of page faults :%d",pf+frsize);
getch();
}
void display()
{
int i; printf("\n");
for(i=0;i<3;i++)
printf("\t%d",fr[i]);
}

Page 34
OUTPUT:

2 -1 -1
2 3 -1
2 3 -1
2 3 1
2 5 1
2 5 1
2 5 4
2 5 4
3 5 4
3 5 2
3 5 2
3 5 2

No of page faults: 7

Page 35
 C) OPTIMAL

AIM: To implement optimal page replacement technique.

ALGORTHIM:

1. Start Program
2. Read Number Of Pages And Frames
3.Read Each Page Value
4. Search For Page In The Frames
5.If Not Available Allocate Free Frame
6. If No Frames Is Free Repalce The Page With The Page That Is Leastly Used
7.Print Page Number Of Page Faults
8.Stop process.

SOURCE CODE:

/* Program to simulate optimal page replacement */

#include<stdio.h>
#include<conio.h>
int fr[3], n, m;
void
display();
void main()
{
int i,j,page[20],fs[10];
int
max,found=0,lg[3],index,k,l,flag1=0,flag2=0,pf=0;
float pr;
clrscr();
printf("Enter length of the reference string: ");
scanf("%d",&n);
printf("Enter the reference string: ");
for(i=0;i<n;i++)
scanf("%d",&page[i]);
printf("Enter no of frames: ");
scanf("%d",&m);
for(i=0;i<m;i++)
fr[i]=-1; pf=m;

Page 36
for(j=0;j<n;j++)
{
flag1=0; flag2=0;
for(i=0;i<m;i++)
{
if(fr[i]==page[j])
{
flag1=1; flag2=1;
break;
}
}
if(flag1==0)
{
for(i=0;i<m;i++)
{
if(fr[i]==-1)
{
fr[i]=page[j]; flag2=1;
break;
}
}
}
if(flag2==0)
{
for(i=0;i<m;i++)
lg[i]=0;
for(i=0;i<m;i++)
{
for(k=j+1;k<=n;k++)
{
if(fr[i]==page[k])
{
lg[i]=k-j;
break;
}
}
}
found=0;
for(i=0;i<m;i++)
{
if(lg[i]==0)
{
index=i;
found = 1;

Page 37
 break;
}
}
if(found==0)
{
max=lg[0]; index=0;
for(i=0;i<m;i++)
{
if(max<lg[i])
{
max=lg[i];
index=i;
}
}
}
fr[index]=page[j];
pf++;
}
display();
}
printf("Number of page faults : %d\n", pf);
pr=(float)pf/n*100;
printf("Page fault rate = %f \n", pr); getch();
}
void display()
{
int i; for(i=0;i<m;i++)
printf("%d\t",fr[i]);
printf("\n");
}

Page 38
 OUTPUT:
Enter length of the reference string: 12
Enter the reference string: 1 2 3 4 1 2 5 1 2 3 4 5
Enter no of frames: 3
1 -1 -1
1 2 -1
123
124
124
124
125
125
125
325
425
425
Number of page faults : 7 Page fault rate = 58.333332

VIVA QUESTIONS
1) What is meant by page fault?
2) What is meant by paging?
3) What is page hit and page fault rate?
4) List the various page replacement algorithm
5) Which one is the best replacement algorithm?

Page 39
EXPERIMENT NO. 7
FILE ORGANIZATION TECHNIQUES

A) SINGLE LEVEL DIRECTORY:

AIM: Program to simulate Single level directory file organization technique.

DESCRIPTION:
The directory structure is the organization of files into a hierarchy of folders. In a single-level
directory system, all the files are placed in one directory. There is a root directory which has all
files. It has a simple architecture and there are no sub directories. Advantage of single level
directory system is that it is easy to find a file in the directory.

SOURCE CODE :
#include<stdio.h>
struct
{
char dname[10],fname[10][10];
int fcnt;
}dir;

void main()
{
int i,ch; char
f[30]; clrscr();
dir.fcnt = 0;
printf("\nEnter name of directory -- ");
scanf("%s", dir.dname);
while(1)
{
printf("\n\n1. Create File\t2. Delete File\t3. Search File \n
4. Display Files\t5. Exit\nEnter your choice -- ");
scanf("%d",&ch);
switch(ch)
{
case 1: printf("\nEnter the name of the file -- ");
scanf("%s",dir.fname[dir.fcnt]);
dir.fcnt++; break;
case 2: printf("\nEnter the name of the file -- ");
scanf("%s",f);
for(i=0;i<dir.fcnt;i++)
{
if(strcmp(f, dir.fname[i])==0)
{
printf("File %s is deleted ",f); strcpy(dir.fname[i],dir.fname[dir.fcnt-1]); break;
}

Page 40
 }
if(i==dir.fcnt)
printf("File %s not found",f);
else

dir.fcnt--;
break;
case 3: printf("\nEnter the name of the file -- ");
scanf("%s",f);
for(i=0;i<dir.fcnt;i++)
{
if(strcmp(f, dir.fname[i])==0)
{
printf("File %s is found ", f);
break;
}
}
if(i==dir.fcnt)
printf("File %s not found",f);
break;
case 4: if(dir.fcnt==0)
printf("\nDirectory Empty");
else
{
printf("\nThe Files are -- ");
for(i=0;i<dir.fcnt;i++)
printf("\t%s",dir.fname[i]);
}
break;
default: exit(0);
}
}
getch();}

Page 41
OUTPUT:

Enter name of directory -- CSE

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 1

Enter the name of the file -- A

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 1

Enter the name of the file -- B

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 1

Enter the name of the file -- C

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 4

The Files are -- A B C

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 3

Enter the name of the file – ABC File

ABC not found
1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 2

Enter the name of the file – B

File B is deleted
1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 5

Page 42
B) TWO LEVEL DIRECTORY

AIM: Program to simulate two level file organization technique

Description:
In the two-level directory system, each user has own user file directory (UFD). The system
maintains a master block that has one entry for each user. This master block contains the
addresses of the directory of the users. When a user job starts or a user logs in, the system's
master file directory (MFD) is searched. When a user refers to a particular file, only his own UFD
is searched.

SOURCE CODE :

#include<stdio.h>
struct
{
char dname[10],fname[10][10];
int fcnt;
}dir[10];

void main()
{
int i,ch,dcnt,k; char
f[30], d[30]; clrscr();
dcnt=0;
while(1)
{
printf("\n\n1. Create Directory\t2. Create File\t3. Delete File");
printf("\n4. Search File\t\t5. Display\t6. Exit\t Enter your choice --");
scanf("%d",&ch);
switch(ch)
{
case 1: printf("\nEnter name of directory -- ");
scanf("%s", dir[dcnt].dname);
dir[dcnt].fcnt=0;
dcnt++;
printf("Directory created"); break;
case 2: printf("\nEnter name of the directory -- ");
scanf("%s",d);
for(i=0;i<dcnt;i++)
if(strcmp(d,dir[i].dname)==0)
{
printf("Enter name of the file -- ");
scanf("%s",dir[i].fname[dir[i].fcnt]);

Page 43
 dir[i].fcnt++;
printf("File created");
}
if(i==dcnt)
printf("Directory %s not found",d);
break;
case 3: printf("\nEnter name of the directory -- ");
scanf("%s",d);
for(i=0;i<dcnt;i++)
for(i=0;i<dcnt;i++)
{
if(strcmp(d,dir[i].dname)==0)
{
printf("Enter name of the file -- ");
scanf("%s",f);
for(k=0;k<dir[i].fcnt;k++)
{
if(strcmp(f, dir[i].fname[k])==0)
{
printf("File %s is deleted ",f);
dir[i].fcnt--;
strcpy(dir[i].fname[k],dir[i].fname[dir[i].fcnt]);
goto jmp;
}
}

printf("File %s not found",f); goto jmp;

}
}
printf("Directory %s not found",d);
jmp : break;
case 4: printf("\nEnter name of the directory -- ");
scanf("%s",d);
for(i=0;i<dcnt;i++)
{
if(strcmp(d,dir[i].dname)==0)
{
printf("Enter the name of the file -- ");
scanf("%s",f);
for(k=0;k<dir[i].fcnt;k++)
{
if(strcmp(f, dir[i].fname[k])==0)
{
printf("File %s is found ",f); goto jmp1;
}
}
printf("File %s not found",f); goto jmp1;
} Page 44
}
 printf("Directory %s not found",d); jmp1: break;
case 5: if(dcnt==0)
printf("\nNo Directory's ");
else
{
printf("\nDirectory\tFiles");
for(i=0;i<dcnt;i++)
{
printf("\n%s\t\t",dir[i].dname);
for(k=0;k<dir[i].fcnt;k++)
printf("\t%s",dir[i].fname[k]);
}
}
break;

default:exit(0);
}
}
getch();
}

Page 45
OUTPUT

1. Create Directory 2. Create File 3. Delete File

4. Search File 5. Display 6. Exit
Enter your choice -- 1
Enter name of directory -- DIR1 Directory created

1. Create Directory 2. Create File 3. Delete File

4. Search File 5. Display 6. Exit Enter your choice -- 1
Enter name of directory -- DIR2 Directory created
1. Create Directory 2. Create File 3. Delete File
4. Search File 5. Display 6. Exit Enter your choice -- 2
Enter name of the directory – DIR1
Enter name of the file -- A1
File created
1. Create Directory 2. Create File 3. Delete File
4. Search File 5. Display 6. Exit
Enter your choice -- 2
Enter name of the directory – DIR1

Enter name of the file -- A2

File created
1. Create Directory 2. Create File 3. Delete File
4. Search File 5. Display 6.
Exit Enter your choice – 6

VIVA QUESTIONS
1. Define directory?
2. List the different types of directory structures?
3. What is the advantage of hierarchical directory structure?
4. Which of the directory structures is efficient? Why?
5. What is acyclic graph directory?

Page 46
 EXPERIMENT.NO.8
FILE ALLOCATION STRATEGIES

A) SEQUENTIAL:
AIM: To write a C program for implementing sequential file allocation method

DESCRIPTION:
The most common form of file structure is the sequential file in this type of file,
a fixed format is used for records. All records (of the system) have the same length,
consisting of the same number of fixed length fields in a particular order because the
length and position of each field are known, only the values of fields need to be stored, the
field name and length for each field are attributes of the file structure.

ALGORITHM:

Step 1: Start the program.

Step 2: Get the number of files.
Step 3: Get the memory requirement of each file.
Step 4: Allocate the required locations to each in sequential order a).
Randomly select a location from available location s1= random(100);
a) Check whether the required locations are free from the selected
location.
if(b[s1].flag==0){
for (j=s1;j<s1+p[i];j++){
if((b[j].flag)==0)count++;
}
if(count==p[i]) break;
}
b) Allocate and set flag=1 to the allocated locations. for(s=s1;s<(s1+p[i]);s++)
{
k[i][j]=s; j=j+1; b[s].bno=s;
b[s].flag=1;
}

Step 5: Print the results file no, length, Blocks allocated. Step
6: Stop the program

Page 47
SOURCE CODE :

#include<stdio.h>
main()
{
int f[50],i,st,j,len,c,k;
clrscr();
for(i=0;i<50;i++)
f[i]=0;
X:
printf("\n Enter the starting block & length of file");
scanf("%d%d",&st,&len);
for(j=st;j<(st+len);j++)
if(f[j]==0)
{
f[j]=1
;
printf("\n%d->%d",j,f[j]);
}
else
{
printf("Block already allocated");
break;
}
if(j==(st+len))
printf("\n the file is allocated to disk");
printf("\n if u want to enter more files?(y-1/n-0)");
scanf("%d",&c);
if(c==1)
goto X;
else
exit();
getch();
}

Page 48
OUTPUT:
Enter the starting block & length of file 4 10
4->1
5->1
6->1
7->1
8->1
9->1
10->1
11->1
12->1
13->1
The file is allocated to disk.

Page 49
B) INDEXED:

AIM: To implement allocation method using chained method

DESCRIPTION:
In the chained method file allocation table contains a field which points to starting
block of memory. From it for each bloc a pointer is kept to next successive block. Hence,
there is no external fragmentation.

ALGORITHM:

Step 1: Start the program.

Step 2: Get the number of files.
Step 3: Get the memory requirement of each file.
Step 4: Allocate the required locations by selecting a location randomly q= random(100);
a) Check whether the selected location is free .
b) If the location is free allocate and set flag=1 to the allocated locations.

q=random(100);
{
if(b[q].flag==0)
b[q].flag=1;
b[q].fno=j;
r[i][j]=q;
Step 5: Print the results file no, length ,Blocks
allocated.
Step 6: Stop the program

Page 50
 SOURCE CODE :

#include<stdio.h>
int f[50],i,k,j,inde[50],n,c,count=0,p;
main()
{
clrscr();
for(i=0;i<50;i++)
f[i]=0;
x: printf("enter index block\t");
scanf("%d",&p);
if(f[p]==0)
{
f[p]=1;
printf("enter no of files on index\t");
scanf("%d",&n);
}
else
{
printf("Block already allocated\n");
goto x;
}
for(i=0;i<n;i++)
scanf("%d",&inde[i]);
for(i=0;i<n;i++)
if(f[inde[i]]==1)
{
printf("Block already allocated");
goto x;
}
for(j=0;j<n;j++)
f[inde[j]]=1;
printf("\n allocated");
printf("\n file indexed");
for(k=0;k<n;k++)
printf("\n %d->%d:%d",p,inde[k],f[inde[k]]);
printf(" Enter 1 to enter more files and 0 to exit\t");
scanf("%d",&c);
if(c==1)
goto x;
else
exit();
getch();
}

Page 51
OUTPUT: enter index block 9
Enter no of files on index 3 1
23
Allocated
File indexed
9->1:1
9->2;1
9->3:1 enter 1 to enter more files and 0 to exit

Page 52
 C) LINKED:

AIM: To implement linked file allocation technique.

DESCRIPTION:
In the chained method file allocation table contains a field which points to starting
block of memory. From it for each bloc a pointer is kept to next successive block. Hence,
there is no external fragmentation

ALGORTHIM:
Step 1: Start the program.
Step 2: Get the number of
files.
Step 3: Get the memory requirement of each file.
Step 4: Allocate the required locations by selecting a location randomly q=
random(100);
a) Check whether the selected location is free .
b) If the location is free allocate and set flag=1 to the allocated locations.
While allocating next location address to attach it to previous location

for(i=0;i<n;i++)
{
for(j=0;j<s[i];j++)
{
q=random(100); if(b[q].flag==0)
b[q].flag=1;
b[q].fno=j;
r[i][j]=q;
if(j>0)
{
}
}
p=r[i][j-1]; b[p].next=q;}
Step 5: Print the results file no, length ,Blocks
allocated.
Step 6: Stop the program

Page 53
SOURCE CODE :
#include<stdio.h>
main()
{
int f[50],p,i,j,k,a,st,len,n,c;
clrscr();
for(i=0;i<50;i++) f[i]=0;
printf("Enter how many blocks that are already
allocated"); scanf("%d",&p);
printf("\nEnter the blocks no.s that are already allocated");
for(i=0;i<p;i++)
{
scanf("%d",&a);
f[a]=1;
}
X:
printf("Enter the starting index block &
length"); scanf("%d%d",&st,&len); k=len;
for(j=st;j<(k+st);j++)
{
if(f[j]==0)
{ f[j]=1;
printf("\n%d->%d",j,f[j]);
}
else
{
printf("\n %d->file is already
allocated",j);
k++;
}
}
printf("\n If u want to enter one
more file? (yes-1/no-0)");
scanf("%d",&c);
if(c==1)
goto
X;
else
exit();
getch( );}

Page 54
 OUTPUT:

Enter how many blocks that are already allocated 3 Enter the blocks no.s
that are already allocated 4 7 Enter the starting index block & length 3 7 9
3->1
4->1 file is already allocated
5->1
6->1
7->1 file is already allocated
8->1
9->1file is already allocated
10->1
11->1
12->1

VIVA QUESTIONS
1) List the various types of files
2) What are the various file allocation strategies?
3) What is linked allocation?
4) What are the advantages of linked allocation?
5) What are the disadvantages of sequential allocation methods?

Page 55
 EXPERIMENT.NO 9
DEAD LOCK AVOIDANCE

AIM: To Simulate bankers algorithm for Dead Lock Avoidance (Banker‘s Algorithm)

DESCRIPTION:
Deadlock is a situation where in two or more competing actions are waiting f or the other
to finish, and thus neither ever does. When a new process enters a system, it must declare the
maximum number of instances of each resource type it needed. This number may exceed the
total number of resources in the system. When the user request a set of resources, the system
must determine whether the allocation of each resources will leave the system in safe state. If
it will the resources are allocation; otherwise the process must wait until some other process
release the resources.
Data structures
n-Number of process, m-number of resource types.
Available: Available[j]=k, k – instance of resource type Rj is available. Max: If
max[i, j]=k, Pi may request at most k instances resource Rj.
Allocation: If Allocation [i, j]=k, Pi allocated to k instances of resource Rj Need: If
Need[I, j]=k, Pi may need k more instances of resource type Rj, Need[I, j]=Max[I, j]-
Allocation[I, j];
Safety Algorithm
1. Work and Finish be the vector of length m and n respectively, Work=Available and
Finish[i] =False.
2. Find an i such that both
Finish[i] =False
Need<=Work If no such I
exists go to step 4.
3. work= work + Allocation, Finish[i] =True;
4. if Finish[1]=True for all I, then the system is in safe state.
Resource request algorithm
Let Request i be request vector for the process Pi, If request i=[j]=k, then process Pi
wants k instances of resource type Rj.
1. if Request<=Need I go to step 2. Otherwise raise an error condition.
2. if Request<=Available go to step 3. Otherwise Pi must since the resources are
available.
3. Have the system pretend to have allocated the requested resources to process Pi by
modifying the state as follows;
Available=Available-Request I;
Allocation I=Allocation +Request I;
Need i=Need i- Request I;
If the resulting resource allocation state is safe, the transaction is completed and process Pi is
allocated its resources. However if the state is unsafe, the Pi must wait for Request i and the
old resource-allocation state is restored.

Page 56
 ALGORITHM:
1. Start the program.
2. Get the values of resources and processes.
3. Get the avail value.
4. After allocation find the need value.
5. Check whether its possible to allocate.
6. If it is possible then the system is in safe state.
7. Else system is not in safety state.
8. If the new request comes then check that the system is in safety.
9. or not if we allow the request.
10. stop the program.
11. end

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
#include<string.h>
void main()
{
int alloc[10][10],max[10][10];
int avail[10],work[10],total[10];
int i,j,k,n,need[10][10];
int m;
int count=0,c=0;
char finish[10];
clrscr();
printf("Enter the no. of processes and resources:");
scanf("%d%d",&n,&m);
for(i=0;i<=n;i++)
finish[i]='n';
printf("Enter the claim matrix:\n");
for(i=0;i<n;i++)
for(j=0;j<m;j++)
scanf("%d",&max[i][j]);
printf("Enter the allocation matrix:\n");
for(i=0;i<n;i++)
for(j=0;j<m;j++)
scanf("%d",&alloc[i][j]);
printf("Resource vector:");
for(i=0;i<m;i++)
scanf("%d",&total[i]);
for(i=0;i<m;i++)
avail[i]=0; for(i=0;i<n;i++)

Page 57
for(j=0;j<m;j++)
avail[j]+=alloc[i][j];
for(i=0;i<m;i++)
work[i]=avail[i];
for(j=0;j<m;j++)
work[j]=total[j]-work[j];
for(i=0;i<n;i++)
for(j=0;j<m;j++)
need[i][j]=max[i][j]-alloc[i][j];
A:
for(i=0;i<n;i++)
{
c=0;
for(j=0;j<m;j++)
if((need[i][j]<=work[j])&&(finish[i]=='n'))
c++;
if(c==m)
{
printf("All the resources can be allocated to Process %d", i+1);
printf("\n\nAvailable resources are:");
for(k=0;k<m;k++)
{
work[k]+=alloc[i][k];
printf("%4d",work[k]);
}
printf("\n");
finish[i]='y';
printf("\nProcess %d executed?:%c \n",i+1,finish[i]);
count++;
}
}
if(count!=n)
goto A;
else
printf("\n System is in safe mode");
printf("\n The given state is safe state");
getch();
}

Page 58
 OUTPUT

Enter the no. of processes and resources: 4 3

Enter the claim matrix:
322
613
314
422
Enter the allocation matrix:
100
612
211
002
Resource vector:9 3 6
All the resources can be allocated to Process 2
Available resources are: 6 2 3
Process 2 executed?:y
All the resources can be allocated to Process 3 Available resources
are: 8 3 4
Process 3 executed?:y
All the resources can be allocated to Process 4 Available resources
are: 8 3 6
Process 4 executed?:y
All the resources can be allocated to Process 1
Available resources are: 9 3 6
Process 1 executed?:y
System is in safe mode
The given state is safe state

VIVA QUESTIONS
1) What is meant by deadlock?
2) What is safe state in banker’s algorithms?
3) What is banker’s algorithm?
4) What are the necessary conditions where deadlock occurs?
5) What are the principles and goals of protection?

Page 59
 EXPERIMENT.NO 10
DEAD LOCK PREVENTION

AIM: To implement deadlock prevention technique

Banker‘s Algorithm:

When a new process enters a system, it must declare the maximum number of
instances of each resource type it needed. This number may exceed the total number of
resources in the system. When the user request a set of resources, the system must
determine whether the allocation of each resources will leave the system in safe state. If
it will the resources are allocation; otherwise the process must wait until some other
process release the resources.

DESCRIPTION:

Data structures

n-Number of process, m-number of resource types.

Available: Available[j]=k, k – instance of resource type Rj is available.

Max: If max[i, j]=k, Pi may request at most k instances resource Rj.
Allocation: If Allocation [i, j]=k, Pi allocated to k instances of resource Rj Need:
If Need[I, j]=k, Pi may need k more instances of resource type Rj,
Need[I, j]=Max[I, j]-Allocation[I, j];

Safety Algorithm

Work and Finish be the vector of length m and n respectively, Work=Available

and Finish[i] =False.
Find an i such
that both Finish[i] =False
Need<=Work

If no such I exists go to step 4.

5. work=work+Allocation, Finish[i] =True;

if Finish[1]=True for all I, then the system is in safe state

Page 60
 ALGORITHM:

1. Start the program.

2. Get the values of resources and processes.

3. Get the avail value.

4. After allocation find the need value.

5. Check whether its possible to allocate.

6. If it is possible then the system is in safe state.

7. Else system is not in safety state

8. Stop the process.

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
void main()
{
char job[10][10];
int time[10],avail,tem[10],temp[10]; int safe[10];
int ind=1,i,j,q,n,t;
clrscr();
printf("Enter no of jobs: ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("Enter name and time: ");
scanf("%s%d",&job[i],&time[i]);
}
printf("Enter the available resources:");
scanf("%d",&avail);
for(i=0;i<n;i++)
{
temp[i]=time[i];
tem[i]=i;
}
for(i=0;i<n;i++)
for(j=i+1;j<n;j++)
{
if(temp[i]>temp[j])
{
t=temp[i];

Page 61
temp[i]=temp[j];
temp[j]=t; t=tem[i];
tem[i]=tem[j];
tem[j]=t;
}
}
for(i=0;i<n;i++)
{
q=tem[i];
if(time[q]<=avail)
{
safe[ind]=tem[i];
avail=avail-tem[q];
printf("%s",job[safe[ind]]);
ind++;
}
else
{
printf("No safe sequence\n");
}
}
printf("Safe sequence is:");
for(i=1;i<ind; i++)
printf("%s %d\n",job[safe[i]],time[safe[i]]);
getch();
}

OUTPUT:

Enter no of jobs:4
Enter name and time: A 1
Enter name and time: B 4
Enter name and time: C 2
Enter name and time: D 3
Enter the available resources: 20
Safe sequence is: A 1, C 2, D 3, B 4.

Page 62
EXPERIMENT.NO 11
AIM: To Write a C program to simulate disk scheduling algorithms
a) FCFS b) SCAN c) C-SCAN

DESCRIPTION
One of the responsibilities of the operating system is to use the hardware efficiently. For the
disk drives, meeting this responsibility entails having fast access time and large disk
bandwidth. Both the access time and the bandwidth can be improved by managing the order in
which disk I/O requests are serviced which is called as disk scheduling. The simplest form of
disk scheduling is, of course, the first-come, first-served (FCFS) algorithm. This algorithm is
intrinsically fair, but it generally does not provide the fastest service. In the SCAN algorithm,
the disk arm starts at one end, and moves towards the other end, servicing requests as it reaches
each cylinder, until it gets to the other end of the disk. At the other end, the direction of head
movement is reversed, and servicing continues. The head continuously scans back and forth
across the disk. C-SCAN is a variant of SCAN designed to provide a more uniform wait time.
Like SCAN, C-SCAN moves the head from one end of the disk to the other, servicing requests
along the way. When the head reaches the other end, however, it immediately returns to the
beginning of the disk without servicing any requests on the return trip

PROGRAM

A) FCFS DISK SCHEDULING ALGORITHM

#include<stdio.h>
main()
{
int t[20], n, I, j, tohm[20], tot=0; float avhm;
clrscr();
printf(“enter the no.of tracks”);
scanf(“%d”,&n);
printf(“enter the tracks to be traversed”);
for(i=2;i<n+2;i++)
scanf(“%d”,&t*i+);
for(i=1;i<n+1;i++)
{
tohm[i]=t[i+1]-t[i];
if(tohm[i]<0)
tohm[i]=tohm[i]*(-1);
}
for(i=1;i<n+1;i++)
tot+=tohm[i];
avhm=(float)tot/n;
printf(“Tracks traversed\tDifference between tracks\n”);
for(i=1;i<n+1;i++)
printf(“%d\t\t\t%d\n”,t*i+,tohm*i+);
printf("\nAverage header movements:%f",avhm);
getch();
}

Page 63
INPUT
Enter no.of tracks:9
Enter track position:55 58 60 70 18 90 150 160 184

OUTPUT
Tracks traversed Difference between tracks
55 45
58 3
60 2
70 10
18 52
90 72
150 60
160 10
184 24

Average header movements:30.888889

Page 64
B) SCAN DISK SCHEDULING ALGORITHM
#include<stdio.h>
main()
{
int t[20], d[20], h, i, j, n, temp, k, atr[20], tot, p, sum=0;
clrscr();
printf("enter the no of tracks to be traveresed");
scanf("%d'",&n);
printf("enter the position of head");
scanf("%d",&h);
t[0]=0;t[1]=h;
printf("enter the tracks");
for(i=2;i<n+2;i++)
scanf("%d",&t[i]);
for(i=0;i<n+2;i++)
{
for(j=0;j<(n+2)-i-1;j++)
{
if(t[j]>t[j+1])
{
temp=t[j];
t[j]=t[j+1];
t[j+1]=temp;
}}}
for(i=0;i<n+2;i++)
if(t[i]==h)
j=i;k=i;
p=0;
while(t[j]!=0)
{
atr[p]=t[j]; j--;
p++;
}
atr[p]=t[j];
for(p=k+1;p<n+2;p++,k++)
atr[p]=t[k+1];
for(j=0;j<n+1;j++)
{
if(atr[j]>atr[j+1])
d[j]=atr[j]-atr[j+1];
else
d[j]=atr[j+1]-atr[j];
sum+=d[j];
}
printf("\nAverage header movements:%f",(float)sum/n);
getch();}

Page 65
INPUT
Enter no.of tracks:9
Enter track position:55 58 60 70 18 90 150 160 184
OUTPUT
Tracks traversed Difference between tracks

150 50
160 10
184 24
90 94
70 20
60 10
58 2
55 3
18 37

Average header movements: 27.77

Page 66
 C) C-SCAN DISK SCHEDULING ALGORITHM
#include<stdio.h>
main()
{
int t[20], d[20], h, i, j, n, temp, k, atr[20], tot, p, sum=0;
clrscr();
printf("enter the no of tracks to be traveresed");
scanf("%d'",&n);
printf("enter the position of head");
scanf("%d",&h);
t[0]=0;t[1]=h;
printf("enter total tracks");
scanf("%d",&tot);
t[2]=tot-1;
printf("enter the tracks");
for(i=3;i<=n+2;i++)
scanf("%d",&t[i]);
for(i=0;i<=n+2;i++)
for(j=0;j<=(n+2)-i-1;j++)
if(t[j]>t[j+1])
{
temp=t[j];
t[j]=t[j+1];
t[j+1]=temp
}
for(i=0;i<=n+2;i++)
if(t[i]==h);
j=i;break;
p=0;
while(t[j]!=tot-1)
{
atr[p]=t[j];
j++;
p++;
}
atr[p]=t[j];
p++;
i=0;
while(p!=(n+3) && t[i]!=t[h])
{
atr[p]=t[i]; i++;
p++;
}

Page 67
 for(j=0;j<n+2;j++)
{
if(atr[j]>atr[j+1])
d[j]=atr[j]-atr[j+1];
else
d[j]=atr[j+1]-atr[j];
sum+=d[j];
}
printf("total header movements%d",sum);
printf("avg is %f",(float)sum/n);
getch();
}

Page 68
INPUT
Enter the track position : 55 58 60 70 18 90 150 160 184
Enter starting position : 100

OUTPUT

Tracks traversed Difference Between tracks

150 50
160 10
184 24
18 240
55 37
58 3
60 2
70 10
90 20
Average seek time : 35.7777779

Page 69